You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Sketch uses 298993 bytes (22%) of program storage space. Maximum is 1310720 bytes.
Global variables use 16232 bytes (4%) of dynamic memory, leaving 311448 bytes forlocal variables. Maximum is 327680 bytes.
"/Users/zouzou/Library/Arduino15/packages/esp32/tools/esptool_py/4.6/esptool" --chip esp32s3 --port "/dev/cu.usbmodem0001A00000001" --baud 115200 --before default_reset --after hard_reset write_flash -z --flash_mode keep --flash_freq keep --flash_size keep 0x0 "/private/var/folders/hc/8f7lbnqs54bb8nhb0_cw13f80000gp/T/arduino/sketches/6A79E4879AA62DAD3B67D8D6F02D3D51/ArduinoSineFunction.ino.bootloader.bin" 0x8000 "/private/var/folders/hc/8f7lbnqs54bb8nhb0_cw13f80000gp/T/arduino/sketches/6A79E4879AA62DAD3B67D8D6F02D3D51/ArduinoSineFunction.ino.partitions.bin" 0xe000 "/Users/zouzou/Library/Arduino15/packages/esp32/hardware/esp32/3.0.1/tools/partitions/boot_app0.bin" 0x10000 "/private/var/folders/hc/8f7lbnqs54bb8nhb0_cw13f80000gp/T/arduino/sketches/6A79E4879AA62DAD3B67D8D6F02D3D51/ArduinoSineFunction.ino.bin"
esptool.py v4.6
Serial port /dev/cu.usbmodem0001A00000001
Connecting......................................
A fatal error occurred: Failed to connect to ESP32-S3: No serial data received.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html
Failed uploading: uploading error: exit status 2
More Information
12:58:47.644 -> �[0;32mI (478) TinyUSB: TinyUSB Driver installed�[0m
12:58:47.644 -> �[0;32mI (488) example: USB initialization DONE�[0m
12:58:48.535 -> �[0;32mI (1388) example: log -> UART�[0m
12:58:48.632 -> example: print -> stdout
12:58:48.765 -> example: print -> stderr
12:58:50.055 -> �[0;32mI (2888) example: log -> UART�[0m
12:58:50.153 -> example: print -> stdout
12:58:50.253 -> example: print -> stderr
12:58:50.556 -> ESP-ROM:esp32s3-20210327
12:58:50.588 -> Build:Mar 27 2021
12:58:50.588 -> rst:0x1 (POWERON),boot:0x0 (DOWNLOAD(USB/UART0))
12:58:50.588 -> waiting for download
I think the serial communication and connection line is normal, because I can read the inflow of data in the serial monitor and I can enter the burn/download mode, but I tried so many ways to burn the program but I cannot!
USB to TTL/CH340
Development Board ESP32 DEV MODULE /ESP32SE DEV MODULE /ESP32S3 DEV MODULE OCTAL(WROOM2)
FLASH MODE DIO/QIO 80MHZ
Power Supply 3.3V /5.5V
The same data cable and docking station can burn and upload the program normally on the ESP32-CAM development board.
It's giving me a headache.
Other Steps to Reproduce
No response
I Have Read the Troubleshooting Guide
I confirm I have read the troubleshooting guide.
The text was updated successfully, but these errors were encountered:
github-actionsbot
changed the title
A fatal error occurred: Failed to connect to ESP32-S3: No serial data received.
A fatal error occurred: Failed to connect to ESP32-S3: No serial data received. (ESPTOOL-909)
Aug 26, 2024
Does this mean that USB-TTL 3.3V/5V = CH340 3.3V/5V? I don't understand why you mention two configurations.
Are you using the correct serial port? On MacOS, USB-to-Serial bridges usually appear as a /dev/cu.usbserial device. Your log shows /dev/cu.usbmodem - which usually appears when you connect to the internal USB-Serial/JTAG or USB-OTG peripherals of the ESP.
You mention you can enter the burn/download mode, can you really see the waiting for download prompt in the serial log? How do you enter the download mode? The bare ESP32-S3 module has no BOOT and RESET buttons - meaning you can't perform a manual reset to bootloader. Also, you do not mention any connection to the boot strapping pins (DTR -> GPIO0, RTS -> EN pin) - meaning an automatic reset cannot be performed as well.
Operating System
macOS 14.4.1
Esptool Version
v4.0.1
Python Version
Python 3.9.6
Chip Description
ESP32-S3-WROOM-1
Device Description
ESP32-S3-WROOM-1
Hardware Configuration
USB-TTL 3.3V/5V USB-TTL(TX)->ESP32S3(RX) USB-TTL(RX)->ESP32S3(TX)
CH340 3.3V/5V CH340L(TX)->ESP32S3(RX) CH340(RX)->ESP32S3(TX)
How is Esptool Run
Arduino
Full Esptool Command Line that Was Run
No response
Esptool Output
More Information
12:58:47.644 -> �[0;32mI (478) TinyUSB: TinyUSB Driver installed�[0m
12:58:47.644 -> �[0;32mI (488) example: USB initialization DONE�[0m
12:58:48.535 -> �[0;32mI (1388) example: log -> UART�[0m
12:58:48.632 -> example: print -> stdout
12:58:48.765 -> example: print -> stderr
12:58:50.055 -> �[0;32mI (2888) example: log -> UART�[0m
12:58:50.153 -> example: print -> stdout
12:58:50.253 -> example: print -> stderr
12:58:50.556 -> ESP-ROM:esp32s3-20210327
12:58:50.588 -> Build:Mar 27 2021
12:58:50.588 -> rst:0x1 (POWERON),boot:0x0 (DOWNLOAD(USB/UART0))
12:58:50.588 -> waiting for download
I think the serial communication and connection line is normal, because I can read the inflow of data in the serial monitor and I can enter the burn/download mode, but I tried so many ways to burn the program but I cannot!
USB to TTL/CH340
Development Board ESP32 DEV MODULE /ESP32SE DEV MODULE /ESP32S3 DEV MODULE OCTAL(WROOM2)
FLASH MODE DIO/QIO 80MHZ
Power Supply 3.3V /5.5V
The same data cable and docking station can burn and upload the program normally on the ESP32-CAM development board.
It's giving me a headache.
Other Steps to Reproduce
No response
I Have Read the Troubleshooting Guide
The text was updated successfully, but these errors were encountered: