Skip to content

Latest commit

 

History

History
161 lines (106 loc) · 8.42 KB

NEWS.md

File metadata and controls

161 lines (106 loc) · 8.42 KB
Raw

rasterPrep 0.2.0.9002

  • Use sf's gdal for overviews.
  • update documentation

rasterPrep 0.2.0.9001

Breaking Changes

  • Fix bug in addVat that caused it to replace the second attribute column name with "attributes" when there were only two columns. For example if the input names where "VALUE", and "class" the output previously would have had columns "VALUE", "COUNT", and "attributes", but will now have "VALUE", "COUNT", and "class". Although this fixes a bug it may break existing code that expect the old behavior.

Updates

  • Drop raster package in favor of terra this was 95% done in prior version. Replacing raster::freq() that with terra::freq() within addOverviews() was the last step.

  • Add unit testing for all functions that call gdal utilities.

  • Switch from using shell commands to calling sf::gdal_utils, which uses GDAL distributed with the sf package. So the user does not need to install their own GDAL for the command line; and issues arising from weird GDAL configurations should be reduced and hopefully will be fully the responsibility of the sf team.

    • This is complete with the exception of addOverviews. An accepted PR

    fixes an issue with sf::gdal_addo that blocked the use of configure options - making it impossible to create compressed overviews. With the next update to sf on CRAN I'll switch addOverviews over to sf too.

    • Setting rasterPrepOptions(usesf = FALSE) will switch back to the old behavior of exclusively using shell commands.

  • Overhaul vignette.

  • Update README.

  • Check spelling

  • Lint

rasterPrep 0.1.12.9004

  • On load rasterPrep now looks for an environmental variable RASTERPREP_PROJ and if it exists calls rasterPrepOptions(projLib = value) with the result.

    This allows setting the environmental variable PROJ_LIB in a consistent way regardless of whether sp or rgdal is loaded in the session (they change PROJ_LIB).

    Ultimately, I'd like to switch to using the wrappers to gdal utilities that are in sf so that we don't need to mess with system variables.

  • makeNiceTif() gains new argument noDataValue that allows controlling the no data value assigned to the output grid. Cell values are not updated.

rasterPrep 0.1.12.9003

  • Fixed spelling in addOverviews. Fixes #5.

rasterPrep 0.1.12.9002

  • Added verbose setting that defaults to FALSE and can be turned on with rasterPrepOptions(verbose = TRUE). This means that the default behavior is not to print any messages to the screen.

  • All cat() and print() statements are now conditional on verbose setting.

rasterPrep 0.1.12.9001

  • rasterInfo(), a new function migrated from gridio returns a nested list with parsed output from gdalinfo via [sf::sf::gdal_utils()] (same as [terra::describe()]) it returns a rasterInfo object.

  • print.rasterInfo() a new function (migrated from gridio) prints a rasterInfo object nicely (or at least better than the default list printing).

  • Added a NEWS.md file to track changes to the package and moved old items from the change log to NEWS.md

  • Converted to roxygen with markdown support

  • Used roxygen2md to update documentation (from old .Rd formatting to markdown)

rasterPrep 0.1.12

Nov 17, 2022

warpToReference() now has BigTIFF argument to request the BigTIFF extension of the geoTIFF format in output. BigTIFF is an extension of TIFF that allows files over 5 GiB. When writing compressed TIFFs, the new default since v.0.1.11, GDAL no longer automatically generates BigTIFF as needed. The new argument allows the user to force the output to be BigTIFF. If you get an error along the lines of:

`TIFFFetchDirectory:  path/file.tif: Can not read TIFF directory count (GDAL error 1)`, 
`TIFFReadDirectory:Failed to read directory at offset 4294967234 (GDAL error 1)'`, or
`TIFFAppendToStrip:Maximum TIFF file size exceeded`

Than you may need to use BigTIFF = TRUE

Oct 8, 2022 (v 0.1.11)

  • added compression argument to warpToReference which allows specifying LZW or DEFLATE compression.

July 8, 2022 (v 0.1.10)

  • assessType now returns values consistent with the raster package's default no data types for Int16 and Int32. Previously these returned smaller values that were theoretically the smallest value an integer could hold, however, in practice it seemed to trip up some GIS software.

Jan 6. 2021 (v 0.1.9)

  • makeNiceTif now calls gdalinfo with -stats -hist flags when the stats argument is TRUE. This forces calculation of a histogram as well as the statistics. Previously I used the -stats flag in gdal_translate which only did the stats.

Oct 28, 2021 (v 0.1.8)

  • addOverviews now defaults to clean = FALSE. With clean = TRUE it just deleted overviews.

Oct 21, 2021 (v 0.1.7)

  • The two functions that use gdal_rasterize (rasterizeToRefence() and makeReference()) were failing to retain the CRS. I tracked this down to the GDAL_DATA environment variable that rgdal is setting on load. I was surprised to see that sf package also sets GDAL_DATA when it loads - to a yet different path. This problem was subtle as gdal_translate ran cleanly without error but silently dropped the projection. I now set both environmental variables (GDAL_DATA and PROJ_LIB) before system calls and then set both back to prior values right after each call. This is all controlled through rasterPrepOptions(). Note when I later tried to create a reproducible minimal example demonstrating side-effects from GDAL_DATA I couldn't; so I no longer feel certain that GDAL_DATA is a problem but I'm leaving code to reset it in just in case as I feel like the GDAL_DATA should be set to the directory on the system not those in the package installations of GDAL while executing system commands.

  • makeReference, warpToReference, rasterizeToReference, and makeNiceTif now all throw a errors if the destination file they create lacks a CRS.

  • The vignette now uses terra and gdalUtilities instead of rgdal, raster, and gdalUtils. It also deletes any pre-existing output files and checks to make sure there is consistent CRS information for the files created.

  • addColorTable now uses terra instead of rgdal and the package no longer depends on rgdal directly.

  • addColorTable still uses raster::freq() as in my tests terra::freq() threw errors but this is the last remnant of raster and sp that I'm aware of.

October 5, 2021 (v 0.1.6)

  • I replaced most calls to gdalUtils with system calls. At one point I had thought about migrating all calls to gdalUtils but it's easier to manage the PROJ_LIB problem (see Sept 30 updates) with direct system calls. Consequently rasterPrep package no longer depends on the gdalUtils package.

  • I streamlined rasterizeToReference which had some code that looks like it was added to correct the problem fixed in 0.1.5 before I fully understood the problem.

  • I've started eliminating all calls to rgdal, sp, and raster using terra and sf instead. Still pending: addVat uses raster::freq, need to replace with terra. the vignette still uses gdalUtils and rgdal addColorTable still uses rgdal::GDALinfo

September 30, 2021 (V 0.1.5)

  • rasterPrep now by default sets the system environment setting PROJ_LIB to "" before invoking system calls. This behavior can be controlled with a new function rasterPrepOptions(). The current options are resetLibs and projLib which determine whether PROJ_LIB is set and what it's set to. In all cases after running the system call the PROJ_LIB environment variable is reset to its original value. All of this is in response to a problem discussed here: r-spatial/discuss#31 where rgdal sets PROJ_LIB to point to its own installation within the package directory and consequently calls to GDAL Utilities installed on the system (perhaps a newer or older version) also use rgdal's PROJ library instead of the system's. This mismatch sometimes results in clear errors but other times result in opaque errors or output that looks OK but is missing the spatial reference. The default value of "" is correct for my system. To determine what to use for your system restart R without any packages loaded and then execute: Sys.getenv("PROJ_LIB"). Note though if you see a path that ends in "/rgdal/proj" than you're looking at it after rgdal has set it and you very likely do not want to use that path.