Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Cannot program v3.0.8 #22

Open
goran-mahovlic opened this issue Jul 19, 2020 · 3 comments
Open

Cannot program v3.0.8 #22

goran-mahovlic opened this issue Jul 19, 2020 · 3 comments

Comments

@goran-mahovlic
Copy link
Member

We need to add new board to supported boards
@mjosaarinen
Copy link

Yup ran into this with some new boards and was puzzled why a "cable" is found only if I downgrade the "eprom version" from 3.0.8 to 3.0.3. The error messages could be better.

@goran-mahovlic
Copy link
Member Author

We have fork of this repository that is continuing development, and 3.0.8. is added there along with other fixes ...

https://github.com/kost/fujprog

@tcal-x
Copy link

tcal-x commented Aug 3, 2021

Yes, I hit this using LiteX for ULX3S.

I was able to get it to work by adding the 12K v3.0.8 entry.

And yes, fujprog worked with no modification.

dmesg for my board shows "Product: ULX3S FPGA 12K v3.0.8".

ujprog is the programmer used by LiteX for this board.
Should I request that Litex start using fujprog instead?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@goran-mahovlic @mjosaarinen @tcal-x