-
Notifications
You must be signed in to change notification settings - Fork 60
/
terminal_codes.txt
102 lines (88 loc) · 6.46 KB
/
terminal_codes.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
Cursor Control
<ESC>[?25l Cursor invisible
<ESC>[?25b Cursor blinking
<ESC>[?25h Cursor visible
<ESC>[H Move to 0-0
<ESC>[f Move to 0-0
<ESC>[s Save the cursor position
<ESC>[u Move cursor to previously saved position
<ESC>[<Row>;<Col>H Move to <Row>,<Col>
<ESC>[<Row>;<Col>f Move to <Row>,<Col>
<ESC>[<n>A Move the cursor up <n> lines
<ESC>[<n>B Move the cursor down <n> lines
<ESC>[<n>C Move the cursor forward <n> characters
<ESC>[<n>D Move the cursor backward <n> characters
Clearing Text
<ESC>[K Clear from cursor to the end of the line
<ESC>[0K Clear from cursor to the end of the line
<ESC>[1K Clear from the beginning of the current line to the cursor
<ESC>[2K Clear the whole line
<ESC>[J Clear the screen from cursor
<ESC>[0J Clear the screen from cursor
<ESC>[1J Clear the screen until cursor position
<ESC>[2J Clear the screen and move the cursor to 0-0, defined sprites are removed, loaded bitmaps are kept
Insert / Delete
<ESC>[1@ Insert a blank character position (shift line to the right)
<ESC>[1P Delete a character position (shift line to the left)
<ESC>[1L Insert blank line at current row (shift screen down)
<ESC>[1M Delete the current line (shift screen up)
Graphics
<ESC>[#<x0>;<y0>;<x1>;<y1>l Draw a line from <x0>,<y0> to <x1>,<y1>
<ESC>[#<x0>;<y0>;<w>;<h>r Fill a rectangle with top-left corner at <x0>,<y0> and width <w>, height <h>
<ESC>[#<x0>;<y0>;<w>;<h>R Draw a rectangle with top-left corner at <x0>,<y0> and width <w>, height <h>
<ESC>[#<x0>;<y0>;<r>c Fill a circle with center at <x0>,<y0> and radius <r>
<ESC>[#<x0>;<y0>;<r>C Draw a circle with center at <x0>,<y0> and radius <r>
<ESC>[#<x0>;<y0>;<x1>;<y1>;<x2>;<y2>T Draw a triangle from <x0>,<y0> to <x1>,<y1> to <x2>,<y2>
<ESC>[#<idx>;<x>;<y>;<b>a Load ASCII encoded bitmap to index 0-127 with width x and height y pixels, base=10 for decimal, 16 for hex.
Expects x*y semicolon separated pixels of ASCII encoded colors, e.g. 12;23;44;44;130;130; or for hex C;17;2C;2C;82;82;
A semicolon after the last pixel needs to be sent.
<ESC>[#<idx>;<x>;<y>;<b>A Load RLE compressed ASCII encoded bitmap to index 0-127 with width x and height y pixels, base=10 for decimal, 16 for hex.
Expects RLE compressed ASCII encoded semicolon separated pixel data after this command,
e.g. 16;32; or with hex 10;20; draws color 16 for the next 32 pixels.
Repeat values must be between 1 and 255, of 1 and FF for hex.
A semicolon after the last repeat value needs to be sent.
<ESC>[#<idx>;<x>;<y>b Load raw bitmap to index 0-127 with width x and height y pixels. Expects x*y binary pixel bytes sent after this command.
<ESC>[#<idx>;<x>;<y>B Load RLE compressed bitmap to index 0-127 with width x and height y pixels. Expects RLE compressed binary pixel data after this command, e.g. 0x10 0x20 draws color 16 for the next 32 pixels.
<ESC>[#<idx>;<x>;<y>d Draw bitmap with index 0-127 at position x, y.
<ESC>[#<idx>;<ref>;<x>;<y>s Draw a sprite with index 0-255 from bitmap <ref> at position <x>, <y>.
<ESC>[#<idx>x Remove sprite with index 0-255, restore background.
<ESC>[#<idx>;<x>;<y>m Move sprite with index 0-255 to x,y, restore background.
Scrolling
<ESC>[#<n>" Scroll up by <n> pixels, fill with background color.
<ESC>[#<n>_ Scroll down by <n> pixels, fill with background color.
<ESC>[#<n>< Scroll left by <n> pixels, fill with background color.
<ESC>[#<n>> Scroll right by <n> pixels, fill with background color.
Settings
<ESC>[m Reset color attributes (gray on black)
<ESC>[<a>;<b>;<c>m Set display attributes (1 to 3 params, so <b> and <c> are optional)
0 = Reset all attributes
1 = increase intensity (only in 4 byte mode colors 0..7)
2 = decrease intensity (only in 4 byte mode colors 8..15)
7 = Turn on reverse color
22= shifts color from dim to bright (only in 4 byte mode 0..7)
27= Turn off reverse color
30 ... 37 set foreground color to palette color 0 ... 7
40 ... 47 set background color to palette color 0 ... 7
90 ... 97 set high intensity foreground color (palette color 8 ... 15)
100 ... 107 set high intensity background color (palette color 8 ... 15)
<ESC>[38;5;<n>m Set foreground color to <n> (0-255)
<ESC>[38;6;<n>m Set foreground color to <n> (0-255) and save as default
<ESC>[48;5;<n>m Set background color to <n> (0-255)
<ESC>[48;6;<n>m Set background color to <n> (0-255) and save as default
<ESC>[58;5;<n>m Set transparent color to <n> (0-255)
<ESC>[=0m Reset color attributes (gray on black) and sets normal drawing (sprites and characters)
<ESC>[=1m Set XOR drawing (sprites and characters)
<ESC>[=2m Set transparent drawing (sprites and characters)
<ESC>[=0f Set 8x8 font
<ESC>[=1f Set TRS-80 8x16 font
<ESC>[=2f Set TRS-80 8x24 font
<ESC>[=<n>t Set tabulation width (8 by default)
<ESC>[=<n>h Change to display mode <n> (legacy PC ANSI.SYS)
This is actually only approximate resolutions (check README_ADD)
<ESC>[=<n>p Load color palette <n>, where 0=XTerm (default), 1=VGA, 2=custom, 3=C64
<ESC>[=<b>;<n>p Set custom palette, with <n> as the number of colors to follow (1-256) and <b> as the base (10 for decimal or 16 for hex).
<n> colors need to follow this command. Color information is always 8bit RGB, e.g. 000000 for black or FFFFFF for white.
A semicolon after the last color needs to be sent.
Here's an example for color 0:red, 1:green, 2:blue -> <ESC>[=16;3pFF0000;FF00;FF;
Commands from PiGFX to the controller
<ESC>[#<idx1>;<idx2>c Collision detected between sprite idx1 and sprite idx2.