Kustomization

The Kustomization API defines a pipeline for fetching, decrypting, building, validating and applying Kustomize overlays or plain Kubernetes manifests. The Kustomization Custom Resource Definition is the counterpart of Kustomize's kustomization.yaml config file.

Example

The following is an example of a Flux Kustomization that reconciles the Kubernetes manifests stored in a Git repository.

apiVersion: source.toolkit.fluxcd.io/v1
kind: GitRepository
metadata:
  name: podinfo
  namespace: default
spec:
  interval: 5m
  url: https://github.com/stefanprodan/podinfo
  ref:
    branch: master
---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: podinfo
  namespace: default
spec:
  interval: 10m
  targetNamespace: default
  sourceRef:
    kind: GitRepository
    name: podinfo
  path: "./kustomize"
  prune: true
  timeout: 1m

In the above example:

A Flux GitRepository named podinfo is created that clones the master branch and makes the repository content available as an Artifact inside the cluster.
A Flux Kustomization named podinfo is created that watches the GitRepository for Artifact changes.
The Kustomization builds the YAML manifests located at the specified .spec.path, sets the namespace of all objects to the .spec.targetNamespace, validates the objects against the Kubernetes API and finally applies them on the cluster.
As specified by .spec.interval, every ten minutes, the Kustomization runs a server-side apply dry-run to detect and correct drift inside the cluster.
When the Git revision changes, the manifests are reconciled automatically. If previously applied objects are missing from the current revision, these objects are deleted from the cluster when .spec.prune is enabled.

You can run this example by saving the manifest into podinfo.yaml.

Apply the resource on the cluster:
```
kubectl apply -f podinfo.yaml
```

Run kubectl get gitrepositories to see the source status:

NAME      URL                                       READY   STATUS
podinfo   https://github.com/stefanprodan/podinfo   True    stored artifact for revision 'master@sha1:450796ddb2ab6724ee1cc32a4be56da032d1cca0'

Run kubectl get kustomizations to see the reconciliation status:

NAME      READY   STATUS
podinfo   True    Applied revision: master@sha1:450796ddb2ab6724ee1cc32a4be56da032d1cca0

Run kubectl describe kustomization podinfo to see the reconciliation status conditions and events:

...
 Status:
   Conditions:
     Last Transition Time:  2023-03-07T11:14:41Z
     Message:               Applied revision: master@sha1:450796ddb2ab6724ee1cc32a4be56da032d1cca0
     Reason:                ReconciliationSucceeded
     Status:                True
     Type:                  Ready
 Events:
   Type    Reason       Age    From                  Message
   ----    ------       ----   ----                  -------
   Normal  Progressing  1m48s  kustomize-controller  Service/default/podinfo created
                                                     Deployment/default/podinfo created
                                                     HorizontalPodAutoscaler/default/podinfo created
   Normal  ReconciliationSucceeded  1m48s  kustomize-controller  Reconciliation finished in 176.163666ms, next run in 10m0s

Writing a Kustomization spec

As with all other Kubernetes config, a Kustomization needs apiVersion, kind, and metadata fields. The name of a Kustomization object must be a valid DNS subdomain name.

A Kustomization also needs a .spec section.

Source reference

.spec.sourceRef is used to refer to the Source object which has the required Artifact containing the YAML manifests. It has two required fields:

kind: The Kind of the referred Source object. Supported Source types:
name: The Name of the referred Source object.

Cross-namespace references

By default, the Source object is assumed to be in the same namespace as the Kustomization. To refer to a Source object in a different namespace, specify the namespace using .spec.sourceRef.namespace.

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: webapp
  namespace: apps
spec:
  interval: 5m
  path: "./deploy"
  sourceRef:
    kind: GitRepository
    name: webapp
    namespace: shared

On multi-tenant clusters, platform admins can disable cross-namespace references by starting kustomize-controller with the --no-cross-namespace-refs=true flag.

Prune

.spec.prune is a required boolean field to enable/disable garbage collection for a Kustomization.

Garbage collection means that the Kubernetes objects that were previously applied on the cluster but are missing from the current source revision, are removed from the cluster automatically. Garbage collection is also performed when a Kustomization object is deleted, triggering a removal of all Kubernetes objects previously applied on the cluster. The removal of the Kubernetes objects is done in the background, i.e. it doesn't block the reconciliation of the Kustomization.

To enable garbage collection for a Kustomization, set this field to true.

You can disable pruning for certain resources by either labelling or annotating them with:

kustomize.toolkit.fluxcd.io/prune: disabled

For details on how the controller tracks Kubernetes objects and determines what to garbage collect, see .status.inventory.

Interval

.spec.interval is a required field that specifies the interval at which the Kustomization is reconciled, i.e. the controller fetches the source with the Kubernetes manifests, builds the Kustomization and applies it on the cluster, correcting any existing drift in the process. The minimum value should be 60 seconds.

After successfully reconciling the object, the controller requeues it for inspection after the specified interval. The value must be in a Go recognized duration string format, e.g. 10m0s to reconcile the object every 10 minutes.

If the .metadata.generation of a resource changes (due to e.g. a change to the spec) or the Source revision changes (which generates a Kubernetes event), this is handled instantly outside the interval window.

Note: The controller can be configured to apply a jitter to the interval in order to distribute the load more evenly when multiple Kustomization objects are set up with the same interval. For more information, please refer to the kustomize-controller configuration options.

Retry interval

.spec.retryInterval is an optional field to specify the interval at which to retry a failed reconciliation. Unlike .spec.interval, this field is exclusively meant for failure retries. If not specified, it defaults to .spec.interval.

Path

.spec.path is an optional field to specify the path to the directory in the Source Artifact containing the kustomization.yaml file, or the set of plain YAMLs for which a kustomization.yaml should be generated. It defaults to blank, which translates to the root of the Source Artifact.

For more details on the generation of the file, see generating a kustomization.yaml file.

Target namespace

.spec.targetNamespace is an optional field to specify the target namespace for all the objects that are part of the Kustomization. It either configures or overrides the Kustomize namespace.

While .spec.targetNamespace is optional, if this field is non-empty then the Kubernetes namespace being pointed to must exist prior to the Kustomization being applied or be defined by a manifest included in the Kustomization. kustomize-controller will not create the namespace automatically.

Suspend

.spec.suspend is an optional boolean field to suspend the reconciliation of the Kustomization. When a Kustomization is suspended, new Source revisions are not applied to the cluster and drift detection/correction is paused. To resume normal reconciliation, set it back to false or remove the field.

For more information, see suspending and resuming.

Health checks

.spec.healthChecks is an optional list used to refer to resources for which the controller will perform health checks used to determine the rollout status of deployed workloads and the Ready status of custom resources.

A health check entry can reference one of the following types:

Kubernetes built-in kinds: Deployment, DaemonSet, StatefulSet, PersistentVolumeClaim, Pod, PodDisruptionBudget, Job, CronJob, Service, Secret, ConfigMap, CustomResourceDefinition
Flux kinds: HelmRelease, HelmRepository, GitRepository, etc.
Custom resources that are compatible with kstatus

Assuming the Kustomization source contains a Kubernetes Deployment named backend, a health check can be defined as follows:

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: backend
  namespace: default
spec:
  interval: 5m
  prune: true
  sourceRef:
    kind: GitRepository
    name: webapp
  healthChecks:
    - apiVersion: apps/v1
      kind: Deployment
      name: backend
      namespace: dev

After applying the kustomize build output, the controller verifies if the rollout was completed successfully. If the deployment was successful, the Kustomization Ready condition is marked as True, if the rollout failed, or if it takes more than the specified timeout to complete, then the Kustomization Ready condition is set to False. If the deployment becomes healthy on the next execution, then the Kustomization is marked as ready.

When a Kustomization contains HelmRelease objects, instead of checking the underlying Deployments, you can define a health check that waits for the HelmReleases to be reconciled with:

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: webapp
  namespace: default
spec:
  interval: 15m
  path: "./releases/"
  prune: true
  sourceRef:
    kind: GitRepository
    name: webapp
  healthChecks:
    - apiVersion: helm.toolkit.fluxcd.io/v2beta1
      kind: HelmRelease
      name: frontend
      namespace: dev
    - apiVersion: helm.toolkit.fluxcd.io/v2beta1
      kind: HelmRelease
      name: backend
      namespace: dev
  timeout: 5m

If all the HelmRelease objects are successfully installed or upgraded, then the Kustomization will be marked as ready.

Wait

.spec.wait is an optional boolean field to perform health checks for all reconciled resources as part of the Kustomization. If set to true, .spec.healthChecks is ignored.

Timeout

.spec.timeout is an optional field to specify a timeout duration for any operation like building, applying, health checking, etc. performed during the reconciliation process.

Dependencies

.spec.dependsOn is an optional list used to refer to other Kustomization objects that the Kustomization depends on. If specified, then the Kustomization is only applied after the referred Kustomizations are ready, i.e. have the Ready condition marked as True. The readiness state of a Kustomization is determined by its last applied status condition.

This is helpful when there is a need to make sure other resources exist before the workloads defined in a Kustomization are deployed. For example, before installing objects of a certain custom resource kind, the CRDs and the related controller must exist in the cluster.

For example, assuming we have two Kustomizations:

cert-manager: reconciles the cert-manager CRDs and controller
certs: reconciles the cert-manager custom resources

You can instruct the controller to apply the cert-manager Kustomization before certs by defining a dependsOn relationship between the two:

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: cert-manager
  namespace: flux-system
spec:
  interval: 5m
  path: "./cert-manager/controller"
  prune: true
  sourceRef:
    kind: GitRepository
    name: flux-system
  healthChecks:
    - apiVersion: apps/v1
      kind: Deployment
      name: cert-manager
      namespace: cert-manager
---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: certs
  namespace: flux-system
spec:
  dependsOn:
    - name: cert-manager
  interval: 5m
  path: "./cert-manager/certs"
  prune: true
  sourceRef:
    kind: GitRepository
    name: flux-system

If .spec.healthChecks is non-empty or .spec.wait is set to true, a Kustomization will be applied after all its dependencies' health checks have passed. For example, this can be used to ensure a service mesh proxy injector is running before deploying applications inside the mesh.

Note: Circular dependencies between Kustomizations must be avoided, otherwise the interdependent Kustomizations will never be applied on the cluster.

Service Account reference

.spec.serviceAccountName is an optional field used to specify the ServiceAccount to be impersonated while reconciling the Kustomization. For more details, see Role-based Access Control.

Common metadata

.spec.commonMetadata is an optional field used to specify any metadata that should be applied to all the Kustomization's resources. It has two optional fields:

labels: A map used for setting labels on an object. Any existing label will be overridden if it matches with a key in this map.
annotations: A map used for setting annotations on an object. Any existing annotation will be overridden if it matches with a key in this map.

Name Prefix and Suffix

.spec.namePrefix and .spec.nameSuffix are optional fields used to specify a prefix and suffix to be added to the names of all the resources in the Kustomization.

apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: app
spec:
  # ...omitted for brevity
  namePrefix: "prefix-"
  nameSuffix: "-suffix"

Patches

.spec.patches is an optional list used to specify Kustomize patches as inline YAML objects. This enables patching resources using either a strategic merge patch or a JSON6902 patch. A patch can target a single resource or multiple resources. Each item in the list must have the two fields mentioned below:

patch: Patch contains an inline strategic merge patch or an inline JSON6902 patch with an array of operation objects.
target: Target points to the resources that the patch document should be applied to.

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: podinfo
  namespace: flux-system
spec:
  # ...omitted for brevity
  patches:
    - patch: |-
        apiVersion: apps/v1
        kind: Deployment
        metadata:
          name: not-used
        spec:
          template:
            metadata:
              annotations:
                cluster-autoscaler.kubernetes.io/safe-to-evict: "true"
      target:
        kind: Deployment
        labelSelector: "app.kubernetes.io/part-of=my-app"
    - patch: |
        - op: add
          path: /spec/template/spec/securityContext
          value:
            runAsUser: 10000
            fsGroup: 1337
        - op: add
          path: /spec/template/spec/containers/0/securityContext
          value:
            readOnlyRootFilesystem: true
            allowPrivilegeEscalation: false
            runAsNonRoot: true
            capabilities:
              drop:
                - ALL
      target:
        kind: Deployment
        name: podinfo
        namespace: apps

Images

.spec.images is an optional list used to specify Kustomize images. This allows overwriting the name, tag or digest of container images without creating patches.

apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: podinfo
  namespace: flux-system
spec:
  # ...omitted for brevity
  images:
  - name: podinfo
    newName: my-registry/podinfo
    newTag: v1
  - name: podinfo
    newTag: 1.8.0
  - name: podinfo
    newName: my-podinfo
  - name: podinfo
    digest: sha256:24a0c4b4a4c0eb97a1aabb8e29f18e917d05abfe1b7a7c07857230879ce7d3d3

Components

.spec.components is an optional list used to specify Kustomize components. This allows using reusable pieces of configuration logic that can be included from multiple overlays.

apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: podinfo
  namespace: flux-system
spec:
  # ...omitted for brevity
  components:
  - ../ingress
  - ../tls

Note: The components paths must be local and relative to the path specified by .spec.path.

Warning: Components are an alpha feature in Kustomize and are therefore considered experimental in Flux. No guarantees are provided as the feature may be modified in backwards incompatible ways or removed without warning.

Post build variable substitution

With .spec.postBuild.substitute you can provide a map of key-value pairs holding the variables to be substituted in the final YAML manifest, after kustomize build.

With .spec.postBuild.substituteFrom you can provide a list of ConfigMaps and Secrets from which the variables are loaded. The ConfigMap and Secret data keys are used as the variable names.

The .spec.postBuild.substituteFrom.optional field indicates how the controller should handle a referenced ConfigMap or Secret being absent at reconciliation time. The controller's default behavior ― with optional unspecified or set to false ― it has failed reconciliation if the referenced object is missing. By setting the optional field to true, you can indicate that the controller should use the referenced object if it's there, but also tolerate its absence, treating that absence as if the object had been present but empty, defining no variables.

This offers basic templating for your manifests including support for bash string replacement functions e.g.:

${var:=default}
${var:position}
${var:position:length}
${var/substring/replacement}

Note: The name of a variable can contain only alphanumeric and underscore characters. The controller validates the variable names using this regular expression: ^[_[:alpha:]][_[:alpha:][:digit:]]*$.

For example, assuming we have manifests with the following variables:

---
apiVersion: v1
kind: Namespace
metadata:
  name: apps
  labels:
    environment: ${cluster_env:=dev}
    region: "${cluster_region}"

You can specify the variables and their values in the Kustomization definition using .spec.postBuild.substitute and/or .spec.postBuild.substituteFrom:

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: apps
spec:
  # ...omitted for brevity
  postBuild:
    substitute:
      cluster_env: "prod"
      cluster_region: "eu-central-1"
    substituteFrom:
      - kind: ConfigMap
        name: cluster-vars
        # Use this ConfigMap if it exists, but proceed if it doesn't.
        optional: true
      - kind: Secret
        name: cluster-secret-vars
        # Fail if this Secret does not exist.

Note: For substituting variables in a secret, .spec.stringData field must be used i.e:

---
apiVersion: v1
kind: Secret
metadata:
  name: secret
  namespace: flux-system
type: Opaque
stringData:
  token: ${token}

The var values which are specified in-line with substitute take precedence over the ones derived from substituteFrom.

Note: If you want to avoid var substitutions in scripts embedded in ConfigMaps or container commands, you must use the format $var instead of ${var}. If you want to keep the curly braces you can use $${var} which will print out ${var}.

All the undefined variables in the format ${var} will be substituted with an empty string unless a default value is provided e.g. ${var:=default}.

Note: It is recommended to set the --feature-gates=StrictPostBuildSubstitutions=true controller flag, so that the post-build substitutions will fail if a variable without a default value is declared in files but is missing from the input vars.

You can disable the variable substitution for certain resources by either labelling or annotating them with:

kustomize.toolkit.fluxcd.io/substitute: disabled

Substitution of variables only happens if at least a single variable or resource to substitute from is defined. This may cause issues if you rely on expressions which should evaluate to a default value, even if no other variables are configured. To work around this, one can set an arbitrary key/value pair to enable the substitution of variables. For example:

apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: apps
spec:
  # ...omitted for brevity
  postBuild:
    substitute:
      var_substitution_enabled: "true"

Note: When using numbers or booleans as values for variables, they must be enclosed in double quotes vars to be treated as strings, for more information see substitution of numbers and booleans.

You can replicate the controller post-build substitutions locally using kustomize and the Flux CLI:

$ export cluster_region=eu-central-1
$ kustomize build ./apps/ | flux envsubst --strict
---
apiVersion: v1
kind: Namespace
metadata:
  name: apps
  labels:
    environment: dev
    region: eu-central-1

Force

.spec.force is an optional boolean field. If set to true, the controller will replace the resources in-cluster if the patching fails due to immutable field changes.

It can also be enabled for specific resources by labelling or annotating them with:

kustomize.toolkit.fluxcd.io/force: enabled

KubeConfig reference

.spec.kubeConfig.secretRef.Name is an optional field to specify the name of the secret containing a KubeConfig. If specified, objects will be applied, health-checked, pruned, and deleted for the default cluster specified in that KubeConfig instead of using the in-cluster ServiceAccount.

The secret defined in the kubeConfig.SecretRef must exist in the same namespace as the Kustomization. On every reconciliation, the KubeConfig bytes will be loaded from the .secretRef.key key (default: value or value.yaml) of the Secret’s data , and the Secret can thus be regularly updated if cluster-access-tokens have to rotate due to expiration.

---
apiVersion: v1
kind: Secret
metadata:
  name: prod-kubeconfig
type: Opaque
stringData:
  value.yaml: |
    apiVersion: v1
    kind: Config
    # ...omitted for brevity

Note: The KubeConfig should be self-contained and not rely on binaries, environment, or credential files from the kustomize-controller Pod. This matches the constraints of KubeConfigs from current Cluster API providers. KubeConfigs with cmd-path in them likely won't work without a custom, per-provider installation of kustomize-controller.

When both .spec.kubeConfig and .spec.ServiceAccountName are specified, the controller will impersonate the service account on the target cluster.

For more information, see remote clusters/Cluster-API.

Decryption

.spec.decryption is an optional field to specify the configuration to decrypt Secrets that are a part of the Kustomization.

Since Secrets are either plain text or base64 encoded, it's unsafe to store them in plain text in a public or private Git repository. In order to store them safely, you can use Mozilla SOPS and encrypt your Kubernetes Secret data with age and/or OpenPGP keys, or with provider implementations like Azure Key Vault, GCP KMS or Hashicorp Vault.

Note: You should encrypt only the data/stringData section of the Kubernetes Secret, encrypting the metadata, kind or apiVersion fields is not supported. An easy way to do this is by appending --encrypted-regex '^(data|stringData)$' to your sops --encrypt command.

It has two required fields:

.secretRef.name: The name of the secret that contains the keys to be used for decryption.
.provider: The secrets decryption provider to be used. The only supported value at the moment is sops.

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: sops-encrypted
  namespace: default
spec:
  interval: 5m
  path: "./"
  sourceRef:
    kind: GitRepository
    name: repository-with-secrets
  decryption:
    provider: sops
    secretRef:
      name: sops-keys

Note: For information on Secrets decryption at a controller level, please refer to controller global decryption.

The Secret's .data section is expected to contain entries with decryption keys (for age and OpenPGP), or credentials (for any of the supported provider implementations). The controller identifies the type of the entry by the suffix of the key (e.g. .agekey), or a fixed key (e.g. sops.vault-token).

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
data:
  # Exemplary age private key
  identity.agekey: <BASE64>
  # Exemplary Hashicorp Vault token
  sops.vault-token: <BASE64>

age Secret entry

To specify an age private key in a Kubernetes Secret, suffix the key of the .data entry with .agekey.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
data:
  # Exemplary age private key
  identity.agekey: <BASE64>

OpenPGP Secret entry

To specify an OpenPGP (passwordless) keyring in armor format in a Kubernetes Secret, suffix the key of the .data entry with .asc.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
data:
  # Exemplary OpenPGP keyring
  identity.asc: <BASE64>

AWS KMS Secret entry

To specify credentials for an AWS user account linked to the IAM role with access to KMS, append a .data entry with a fixed sops.aws-kms key.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
data:
  sops.aws-kms: |
        aws_access_key_id: some-access-key-id
        aws_secret_access_key: some-aws-secret-access-key
        aws_session_token: some-aws-session-token # this field is optional

Azure Key Vault Secret entry

To specify credentials for Azure Key Vault in a Secret, append a .data entry with a fixed sops.azure-kv key. The value can contain a variety of JSON or YAML formats depending on the authentication method you want to utilize.

Service Principal with Secret

To configure a Service Principal with Secret credentials to access the Azure Key Vault, a JSON or YAML object with tenantId, clientId and clientSecret fields must be configured as the sops.azure-kv value. It optionally supports authorityHost to configure an authority host other than the Azure Public Cloud endpoint.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
stringData:
  # Exemplary Azure Service Principal with Secret
  sops.azure-kv: |
    tenantId: some-tenant-id
    clientId: some-client-id
    clientSecret: some-client-secret

Service Principal with Certificate

To configure a Service Principal with Certificate credentials to access the Azure Key Vault, a JSON or YAML object with tenantId, clientId and clientCertificate fields must be configured as the sops.azure-kv value. It optionally supports clientCertificateSendChain and authorityHost to control the sending of the certificate chain, or to specify an authority host other than the Azure Public Cloud endpoint.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
stringData:
  # Exemplary Azure Service Principal with Certificate
  sops.azure-kv: |
    tenantId: some-tenant-id
    clientId: some-client-id
    clientCertificate: <certificate PEM>

`az` generated Service Principal

To configure a Service Principal generated using az, the output of the command can be directly used as a sops.azure-kv value.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
stringData:
  # Exemplary Azure Service Principal generated with `az`
  sops.azure-kv: |
    {
      "appId": "559513bd-0c19-4c1a-87cd-851a26afd5fc",
      "displayName": "myAKSClusterServicePrincipal",
      "name": "http://myAKSClusterServicePrincipal",
      "password": "e763725a-5eee-40e8-a466-dc88d980f415",
      "tenant": "72f988bf-86f1-41af-91ab-2d7cd011db48"
    }

Managed Identity with Client ID

To configure a Managed Identity making use of a Client ID, a JSON or YAML object with a clientId must be configured as the sops.azure-kv value. It optionally supports authorityHost to configure an authority host other than the Azure Public Cloud endpoint.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
stringData:
  # Exemplary Azure Managed Identity with Client ID
  sops.azure-kv: |
    clientId: some-client-id

GCP KMS Secret entry

To specify credentials for GCP KMS in a Kubernetes Secret, append a .data entry with a fixed sops.gcp-kms key and the service account keys as its value.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
stringData:
  # Exemplary GCP Service Account credentials file
  sops.gcp-kms: |
    {
      "type": "service_account",
      "project_id": "<project-id>",
      "private_key_id": "<private-key-id>",
      "private_key": "<private-key>"
    }

Hashicorp Vault Secret entry

To specify credentials for Hashicorp Vault in a Kubernetes Secret, append a .data entry with a fixed sops.vault-token key and the token as value.

---
apiVersion: v1
kind: Secret
metadata:
  name: sops-keys
  namespace: default
data:
  # Exemplary Hashicorp Vault Secret token
  sops.vault-token: <BASE64>

Working with Kustomizations

Recommended settings

When deploying applications to production environments, it is recommended to configure the following fields, while adjusting them to your desires for responsiveness:

apiVersion: source.toolkit.fluxcd.io/v1
kind: GitRepository
metadata:
  name: webapp
  namespace: apps
spec:
  interval: 1m0s # check for new commits every minute and apply changes
  url: https://github.com/org/webapp # clone over HTTPS
  secretRef: # use token auth
    name: webapp-git-token # Flux user PAT (read-only access)
  ref:
    branch: main
  ignore: |
    # exclude all
    /*
    # include deploy dir
    !/deploy
---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: webapp
  namespace: apps
spec:
  interval: 60m0s # detect drift and undo kubectl edits every hour
  wait: true # wait for all applied resources to become ready
  timeout: 3m0s # give up waiting after three minutes
  retryInterval: 2m0s # retry every two minutes on apply or waiting failures
  prune: true # remove stale resources from cluster
  force: false # enable this to recreate resources on immutable fields changes
  targetNamespace: apps # set the namespace for all resources
  sourceRef:
    kind: GitRepository
    name: webapp
    namespace: apps
  path: "./deploy/production"

Generating a `kustomization.yaml` file

If your repository contains plain Kubernetes manifests without a kustomization.yaml, the file is automatically generated for all the Kubernetes manifests in the directory tree specified in .spec.path.

All YAML files present under that path must be valid Kubernetes manifests, unless they're excluded either by way of the .sourceignore file or the .spec.ignore field on the corresponding Source object.

Example of excluding CI workflows and SOPS config files:

apiVersion: source.toolkit.fluxcd.io/v1
kind: GitRepository
metadata:
  name: podinfo
  namespace: default
spec:
  interval: 5m
  url: https://github.com/stefanprodan/podinfo
  ignore: |
    .github/
    .sops.yaml
    .gitlab-ci.yml

It is recommended to generate the kustomization.yaml on your own and store it in Git, this way you can validate your manifests in CI (example script). Assuming your manifests are inside apps/my-app, you can generate a kustomization.yaml with:

cd apps/my-app

# create kustomization.yaml
kustomize create --autodetect --recursive

Controlling the apply behavior of resources

To change the apply behaviour for specific Kubernetes resources, you can annotate them with:

Annotation	Default	Values	Role
`kustomize.toolkit.fluxcd.io/ssa`	`Override`	- `Override` - `Merge` - `IfNotPresent` - `Ignore`	Apply policy
`kustomize.toolkit.fluxcd.io/force`	`Disabled`	- `Enabled` - `Disabled`	Recreate policy
`kustomize.toolkit.fluxcd.io/prune`	`Enabled`	- `Enabled` - `Disabled`	Delete policy

Note: These annotations should be set in the Kubernetes YAML manifests included in the Flux Kustomization source (Git, OCI, Bucket).

`kustomize.toolkit.fluxcd.io/ssa`

Override

The Override policy instructs the controller to reconcile the Kubernetes resources with the desired state (YAML manifests) defined in the Flux source (Git, OCI, Bucket).

If you use kubectl to edit a Kubernetes resource managed by Flux, all changes will be reverted when the controller reconciles a Flux Kustomization containing that resource. In order to preserve fields added with kubectl, you have to specify a field manager named flux-client-side-apply e.g.:

kubectl apply --field-manager=flux-client-side-apply

Merge

The Merge policy instructs the controller to preserve the fields added by other tools to the Kubernetes resources managed by Flux.

The fields defined in the manifests applied by the controller will always be overridden, the Merge policy works only for adding new fields that don’t overlap with the desired state.

For lists fields which are atomic (e.g. .spec.tolerations in PodSpec), Kubernetes doesn't allow different managers for such fields, therefore any changes to these fields will be reverted. For more context, please see the Kubernetes enhancement document: 555-server-side-apply.

IfNotPresent

The IfNotPresent policy instructs the controller to only apply the Kubernetes resources if they are not present on the cluster.

This policy can be used for Kubernetes Secrets and ValidatingWebhookConfigurations managed by cert-manager, where Flux creates the resources with fields that are later on mutated by other controllers.

Ignore

The Ignore policy instructs the controller to skip applying Kubernetes resources even if they are included in a Flux source (Git, OCI, Bucket).

`kustomize.toolkit.fluxcd.io/force`

When set to Enabled, this policy instructs the controller to recreate the Kubernetes resources with changes to immutable fields.

This policy can be used for Kubernetes Jobs to rerun them when their container image changes.

Note: Using this policy for StatefulSets may result in potential data loss.

`kustomize.toolkit.fluxcd.io/prune`

When set to Disabled, this policy instructs the controller to skip the deletion of the Kubernetes resources subject to garbage collection.

This policy can be used to protect sensitive resources such as Namespaces, PVCs and PVs from accidental deletion.

Role-based access control

By default, a Kustomization apply runs under the cluster admin account and can create, modify and delete cluster level objects (namespaces, CRDs, etc) and namespaced objects (deployments, ingresses, etc). For certain Kustomizations a cluster admin may wish to control what types of Kubernetes objects can be reconciled and under which namespaces. To restrict a Kustomization, one can assign a service account under which the reconciliation is performed using .spec.serviceAccountName.

Assuming you want to restrict a group of Kustomizations to a single namespace, you can create an account with a role binding that grants access only to that namespace:

---
apiVersion: v1
kind: Namespace
metadata:
  name: webapp
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flux
  namespace: webapp
---
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  name: webapp-reconciler
  namespace: webapp
rules:
  - apiGroups: ['*']
    resources: ['*']
    verbs: ['*']
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  name: webapp-reconciler
  namespace: webapp
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: webapp-reconciler
subjects:
- kind: ServiceAccount
  name: flux
  namespace: webapp

Note: The namespace, RBAC and service account manifests should be placed in a Git source and applied with a Kustomization. The Kustomizations that are running under that service account should depend on the one that contains the account.

Create a Kustomization that prevents altering the cluster state outside the webapp namespace:

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: backend
  namespace: webapp
spec:
  serviceAccountName: flux
  dependsOn:
    - name: rbac
  interval: 5m
  path: "./webapp/backend/"
  prune: true
  sourceRef:
    kind: GitRepository
    name: webapp

When the controller reconciles the backend Kustomization, it will impersonate the flux ServiceAccount. If the Kustomization contains cluster level objects like CRDs or objects belonging to a different namespace, the reconciliation will fail since the account it runs under has no permissions to alter objects outside the webapp namespace.

Enforcing impersonation

On multi-tenant clusters, platform admins can enforce impersonation with the --default-service-account flag.

When the flag is set, all Kustomizations which don't have .spec.serviceAccountName specified will use the service account name provided by --default-service-account=<SA Name> in the namespace of the object.

Remote clusters/Cluster-API

With the .spec.kubeConfig field a Kustomization can be fully reconciled on a remote cluster. This composes well with Cluster API bootstrap providers such as CAPBK (kubeadm), CAPA (AWS) and others.

To reconcile a Kustomization to a CAPI controlled cluster, put the Kustomization in the same namespace as your Cluster object, and set the kubeConfig.secretRef.name to <cluster-name>-kubeconfig:

apiVersion: cluster.x-k8s.io/v1alpha3
kind: Cluster
metadata:
  name: stage  # the kubeconfig Secret will contain the Cluster name
  namespace: capi-stage
spec:
  clusterNetwork:
    pods:
      cidrBlocks:
      - 10.100.0.0/16
    serviceDomain: stage-cluster.local
    services:
      cidrBlocks:
      - 10.200.0.0/12
  controlPlaneRef:
    apiVersion: controlplane.cluster.x-k8s.io/v1alpha3
    kind: KubeadmControlPlane
    name: stage-control-plane
    namespace: capi-stage
  infrastructureRef:
    apiVersion: infrastructure.cluster.x-k8s.io/v1alpha3
    kind: DockerCluster
    name: stage
    namespace: capi-stage
---
# ... unrelated Cluster API objects omitted for brevity ...
---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: cluster-addons
  namespace: capi-stage
spec:
  interval: 5m
  path: "./config/addons/"
  prune: true
  sourceRef:
    kind: GitRepository
    name: cluster-addons
  kubeConfig:
    secretRef:
      name: stage-kubeconfig  # Cluster API creates this for the matching Cluster

The Cluster and Kustomization can be created at the same time. The Kustomization will eventually reconcile once the cluster is available.

If you wish to target clusters created by other means than CAPI, you can create a ServiceAccount on the remote cluster, generate a KubeConfig for that account and then create a secret on the cluster where kustomize-controller is running. For example:

kubectl create secret generic prod-kubeconfig \
    --from-file=value.yaml=./kubeconfig

Controller global decryption

Other than authentication using a Secret reference, it is possible to specify global decryption settings on the kustomize-controller Pod. When the controller fails to find credentials on the Kustomization object itself, it will fall back to these defaults.

AWS KMS

While making use of the IAM OIDC provider on your EKS cluster, you can create an IAM Role and Service Account with access to AWS KMS (using at least kms:Decrypt and kms:DescribeKey). Once these are created, you can annotate the kustomize-controller Service Account with the Role ARN, granting the controller permission to decrypt the Secrets. Please refer to the SOPS guide for detailed steps.

kubectl -n flux-system annotate serviceaccount kustomize-controller \
  --field-manager=flux-client-side-apply \
  eks.amazonaws.com/role-arn='arn:aws:iam::<ACCOUNT_ID>:role/<KMS-ROLE-NAME>'

Furthermore, you can also use the usual environment variables used for specifying AWS credentials, by patching the kustomize-controller Deployment:

---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: kustomize-controller
  namespace: flux-system
spec:
  template:
    spec:
      containers:
      - name: manager
        env:
        - name: AWS_ACCESS_KEY_ID
          valueFrom:
            secretKeyRef:
              name: aws-creds
              key: awsAccessKeyID
        - name: AWS_SECRET_ACCESS_KEY
          valueFrom:
            secretKeyRef:
              name: aws-creds
              key: awsSecretAccessKey
        - name: AWS_SESSION_TOKEN
          valueFrom:
            secretKeyRef:
              name: aws-creds
              key: awsSessionToken

In addition to this, the general SOPS documentation around KMS AWS applies, allowing you to specify e.g. a SOPS_KMS_ARN environment variable.

Note:: If you are mounting a secret containing the AWS credentials as a file in the kustomize-controller Pod, you need to specify an environment variable $HOME, since the AWS credentials file is expected to be present at ~/.aws. For example:

env:
  - name: HOME
    value: /home/{$USER}

Azure Key Vault

Workload Identity

If you have Workload Identity set up on your AKS cluster, you can establish a federated identity between the kustomize-controller ServiceAccount and an identity that has "Decrypt" role on the Azure Key Vault. Once, this is done you can label and annotate the kustomize-controller ServiceAccount and Pod with the patch shown below:

apiVersion: kustomize.config.k8s.io/v1beta1
kind: Kustomization
resources:
  - gotk-components.yaml
  - gotk-sync.yaml
patches:
  - patch: |-
      apiVersion: v1
      kind: ServiceAccount
      metadata:
        name: kustomize-controller
        namespace: flux-system
        annotations:
          azure.workload.identity/client-id: <AZURE_CLIENT_ID>
        labels:
          azure.workload.identity/use: "true"
  - patch: |-
      apiVersion: apps/v1
      kind: Deployment
      metadata:
        name: kustomize-controller
        namespace: flux-system
        labels:
          azure.workload.identity/use: "true"
      spec:
        template:
          metadata:
            labels:
              azure.workload.identity/use: "true"

Kubelet Identity

If the kubelet managed identity has Decrypt permissions on Azure Key Vault, no additional configuration is required for the kustomize-controller to decrypt data.

GCP KMS

While making use of Google Cloud Platform, the GOOGLE_APPLICATION_CREDENTIALS environment variable is automatically taken into account. Granting permissions to the Service Account attached to this will therefore be sufficient to decrypt data. When running outside GCP, it is possible to manually patch the kustomize-controller Deployment with a valid set of (mounted) credentials.

---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: kustomize-controller
  namespace: flux-system
spec:
  template:
    spec:
      containers:
      - name: manager
        env:
        - name: GOOGLE_APPLICATION_CREDENTIALS
          value: /var/gcp/credentials.json
        volumeMounts:
        - name: gcp-credentials
          mountPath: /var/gcp/
          readOnly: true
      volumes:
      - name: gcp-credentials
        secret:
          secretName: mysecret
          items:
          - key: credentials
            path: credentials.json

Hashicorp Vault

To configure a global default for Hashicorp Vault, patch the controller's Deployment with a VAULT_TOKEN environment variable.

---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: kustomize-controller
  namespace: flux-system
spec:
  template:
    spec:
      containers:
      - name: manager
        env:
        - name: VAULT_TOKEN
          value: <token>

Kustomize secretGenerator

SOPS encrypted data can be stored as a base64 encoded Secret, which enables the use of Kustomize secretGenerator as follows:

$ echo "my-secret-token" | sops -e /dev/stdin > token.encrypted
$ cat <<EOF > kustomization.yaml
apiVersion: kustomize.config.k8s.io/v1beta1
kind: Kustomization

secretGenerator:
 - name: token
   files:
   - token=token.encrypted
EOF

Commit and push token.encrypted and kustomization.yaml to Git.

The kustomize-controller scans the values of Kubernetes Secrets, and when it detects that the values are SOPS encrypted, it decrypts them before applying them on the cluster.

For secrets in .json, .yaml .ini and .env format, make sure you specify the input type when encrypting them with SOPS:

sops -e --input-type=json config.json > config.json.encrypted
sops -e --input-type=yaml config.yaml > config.yaml.encrypted
sops -e --input-type=env config.env > config.env.encrypted

For kustomize-controller to be able to decrypt a JSON config, you need to set the file extension to .json:

kind: Kustomization
secretGenerator:
  - name: config
    files:
      - config.json=config.json.encrypted

For dotenv files, use the envs directive:

kind: Kustomization
secretGenerator:
  - name: config
    envs:
      - config.env.encrypted

For Docker config files, you need to specify both input and output type as JSON:

sops -e --input-type=json --output-type=json ghcr.dockerconfigjson > ghcr.dockerconfigjson.encrypted

To generate an image pull secret, use the .dockerconfigjson as the secret key:

kind: Kustomization
secretGenerator:
  - name: ghcr-auth
    type: kubernetes.io/dockerconfigjson
    files:
      - .dockerconfigjson=ghcr.dockerconfigjson.encrypted

Post build substitution of numbers and booleans

When using variable substitution with values that are numbers or booleans, the reconciliation may fail if the substitution is for a field that must be of type string. To convert the number or boolean to a string, you can wrap the variable with a double quotes var:

apiVersion: v1
kind: ServiceAccount
metadata:
  name: app
  annotations:
    id: ${quote}${id}${quote}
    enabled: ${quote}${enabled}${quote}

Then in the Flux Kustomization, define the variables as:

apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: app
spec:
  postBuild:
    substitute:
      quote: '"' # double quote var
      id: "123"
      enabled: "true"

Triggering a reconcile

To manually tell the kustomize-controller to reconcile a Kustomization outside the specified interval window, it can be annotated with reconcile.fluxcd.io/requestedAt: <arbitrary value>. Annotating the resource queues the Kustomization for reconciliation if the <arbitrary-value> differs from the last value the controller acted on, as reported in .status.lastHandledReconcileAt.

Using kubectl:

kubectl annotate --field-manager=flux-client-side-apply --overwrite kustomization/<kustomization-name> reconcile.fluxcd.io/requestedAt="$(date +%s)"

Using flux:

flux reconcile kustomization <kustomization-name>

Waiting for `Ready`

When a change is applied, it is possible to wait for the Kustomization to reach a Ready state using kubectl:

kubectl wait kustomization/<kustomization-name> --for=condition=ready --timeout=1m

Suspending and resuming

When you find yourself in a situation where you temporarily want to pause the reconciliation of a Kustomization, you can suspend it using .spec.suspend.

To pause the reconciliation of a specific Kubernetes resource managed by a Flux Kustomization, you can annotate or label the resource in-cluster with:

kustomize.toolkit.fluxcd.io/reconcile: disabled

Note: When the kustomize.toolkit.fluxcd.io/reconcile annotation is set to disabled, the controller will no longer apply changes, nor will it prune the resource. To resume reconciliation, set the annotation to enabled in the source or remove it from the in-cluster object.

Suspend a Kustomization

In your YAML declaration:

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: <kustomization-name>
spec:
  suspend: true

Using kubectl:

kubectl patch kustomization <kustomization-name> --field-manager=flux-client-side-apply -p '{\"spec\": {\"suspend\" : true }}'

Using flux:

flux suspend kustomization <kustomization-name>

Resume a Kustomization

In your YAML declaration, comment out (or remove) the field:

---
apiVersion: kustomize.toolkit.fluxcd.io/v1
kind: Kustomization
metadata:
  name: <kustomization-name>
spec:
  # suspend: true

Note: Setting the field value to false has the same effect as removing it, but does not allow for "hot patching" using e.g. kubectl while practicing GitOps; as the manually applied patch would be overwritten by the declared state in Git.

Using kubectl:

kubectl patch kustomization <kustomization-name> --field-manager=flux-client-side-apply -p '{\"spec\" : {\"suspend\" : false }}'

Using flux:

flux resume kustomization <kustomization-name>

Debugging a Kustomization

There are several ways to gather information about a Kustomization for debugging purposes.

Describe the Kustomization

Describing a Kustomization using kubectl describe kustomization <kustomization-name> displays the latest recorded information for the resource in the Status and Events sections:

...
Status:
...
  Conditions:
    Last Transition Time:  2023-03-29T06:09:32Z
    Message:               Fetching manifests for revision master/67e2c98a60dc92283531412a9e604dd4bae005a9 with a timeout of 4m30s
    Observed Generation:   3
    Reason:                ProgressingWithRetry
    Status:                True
    Type:                  Reconciling
    Last Transition Time:  2023-03-29T06:09:32Z
    Message:               kustomization path not found: stat /tmp/kustomization-1464362706/invalid: no such file or directory
    Observed Generation:   3
    Reason:                ArtifactFailed
    Status:                False
    Type:                  Ready
  Last Applied Revision:    master/67e2c98a60dc92283531412a9e604dd4bae005a9
  Last Attempted Revision:  master/67e2c98a60dc92283531412a9e604dd4bae005a9
  Observed Generation:      2
Events:
  Type     Reason          Age   From                  Message
  ----     ------          ----  ----                  -------
  Warning  ArtifactFailed           2s   kustomize-controller  kustomization path not found: stat /tmp/kustomization-1464362706/invalid: no such file or directory

Trace emitted Events

To view events for specific Kustomization(s), kubectl events can be used to list the Events for specific objects. For example, running

kubectl events -n flux-system --for kustomization/podinfo

lists

LAST SEEN   TYPE     REASON                    OBJECT                  MESSAGE
31s         Warning  ArtifactFailed            kustomization/podinfo   kustomization path not found: stat /tmp/kustomization-3011588360/invalid: no such file or directory
26s         Normal   ArtifactFailed            kustomization/podinfo   HorizontalPodAutoscaler/default/podinfo deleted...
18s         Warning  ArtifactFailed            kustomization/podinfo   kustomization path not found: stat /tmp/kustomization-3336282420/invalid: no such file or directory
9s          Normal   Progressing               kustomization/podinfo   Service/default/podinfo created...
9s          Normal   ReconciliationSucceeded   kustomization/podinfo   Reconciliation finished in 75.190237ms, next run in 5m0s

You can also use the flux events command to view all events for a Kustomization and its related Source. For example,

flux events --for Kustomization/podinfo

will list all events for the podinfo Kustomization in the flux-system namespace and its related Source object, the podinfo GitRepository.

LAST SEEN               TYPE    REASON                          OBJECT                  MESSAGE
3m2s                    Warning ArtifactFailed                  Kustomization/podinfo   kustomization path not found: stat /tmp/kustomization-3336282420/invalid: no such file or directory

2m53s                   Normal  ReconciliationSucceeded         Kustomization/podinfo   Reconciliation finished in 75.190237ms, next run in 5m0s

2m53s                   Normal  Progressing                     Kustomization/podinfo   Service/default/podinfo created
                                                                                        Deployment/default/podinfo created
                                                                                        HorizontalPodAutoscaler/default/podinfo created

19s (x17 over 8m24s)    Normal  GitOperationSucceeded           GitRepository/podinfo   no changes since last reconcilation: observed revision 'master/67e2c98a60dc92283531412a9e604dd4bae005a9'

Besides being reported in Events, the reconciliation errors are also logged by the controller. The Flux CLI offer commands for filtering the logs for a specific Kustomization, e.g. flux logs --level=error --kind=Kustomization --name=<kustomization-name>.

Kustomization Status

Conditions

A Kustomization enters various states during its lifecycle, reflected as Kubernetes Conditions. It can be reconciling while applying the Kustomization on the cluster, it can be ready, or it can fail during reconciliation.

The Kustomization API is compatible with the kstatus specification, and reports Reconciling and Stalled conditions where applicable to provide better (timeout) support to solutions polling the Kustomization to become Ready.

Reconciling Kustomization

The kustomize-controller marks a Kustomization as reconciling when it starts the reconciliation of the same. The Condition added to the Kustomization's .status.conditions has the following attributes:

type: Reconciling
status: "True"
reason: Progressing | reason: ProgressingWithRetry

The Condition message is updated during the course of the reconciliation to report the action being performed at any particular moment such as building manifests, detecting drift, etc.

The Ready Condition's status is also marked as Unkown.

Ready Kustomization

The kustomize-controller marks a Kustomization as ready when a Kustomization is successfully reconciled, i.e. the source was fetched, the kustomization was built and applied on the cluster and all health checks are observed to be passing.

When the Kustomization is "ready", the controller sets a Condition with the following attributes in the Kustomization’s .status.conditions:

type: Ready
status: "True"
reason: ReconciliationSucceeded

Failed Kustomization

The kustomize-controller may get stuck trying to reconcile and apply a Kustomization without completing. This can occur due to some of the following factors:

The Source object does not exist on the cluster.
The Source has not produced an Artifact yet.
The Kustomization's dependencies aren't ready yet.
The specified path does not exist in the Artifact.
Building the kustomization fails.
Garbage collection fails.
Running a health check failed.

When this happens, the controller sets the Ready Condition status to False and adds a Condition with the following attributes to the Kustomization’s .status.conditions:

type: Ready | HealthyCondition
status: "False"
reason: PruneFailed | ArtifactFailed | BuildFailed | HealthCheckFailed | DependencyNotReady | ReconciliationFailed

The message field of the Condition will contain more information about why the reconciliation failed.

While the Kustomization has one or more of these Conditions, the controller will continue to attempt a reconciliation of the Kustomization with an exponential backoff, until it succeeds and the Kustomization marked as ready.

Note that a Kustomization can be reconciling while failing at the same time, for example, due to a newly introduced configuration issue in the Kustomization spec. When a reconciliation fails, the Reconciling Condition reason would be ProgressingWithRetry. When the reconciliation is performed again after the failure, the reason is updated to Progressing.

Inventory

In order to perform operations such as drift detection, garbage collection, etc. kustomize-controller needs to keep track of all Kubernetes objects that are reconciled as part of a Kustomization. To do this, it maintains an inventory containing the list of Kubernetes resource object references that have been successfully applied and records it in .status.inventory. The inventory records are in the format <namespace>_<name>_<group>_<kind>_<version>.

Status:
  Inventory:
    Entries:
      Id: default_podinfo__Service
      V:  v1
      Id: default_podinfo_apps_Deployment
      V:  v1
      Id: default_podinfo_autoscaling_HorizontalPodAutoscaler
      V:  v2

Last applied revision

.status.lastAppliedRevision is the last revision of the Artifact from the referred Source object that was successfully applied to the cluster.

Last attempted revision

.status.lastAttemptedRevision is the last revision of the Artifact from the referred Source object that was attempted to be applied to the cluster.

Observed Generation

The kustomize-controller reports an observed generation in the Kustomization's .status.observedGeneration. The observed generation is the latest .metadata.generation which resulted in either a ready state, or stalled due to an error it can not recover from without human intervention.

Last Handled Reconcile At

The kustomize-controller reports the last reconcile.fluxcd.io/requestedAt annotation value it acted on in the .status.lastHandledReconcileAt field.

For practical information about this field, see triggering a reconcile.

Files

kustomizations.md

Latest commit

History

kustomizations.md

File metadata and controls

Kustomization

Example

Writing a Kustomization spec

Source reference

Cross-namespace references

Prune

Interval

Retry interval

Path

Target namespace

Suspend

Health checks

Wait

Timeout

Dependencies

Service Account reference

Common metadata

Name Prefix and Suffix

Patches

Images

Components

Post build variable substitution

Force

KubeConfig reference

Decryption

age Secret entry

OpenPGP Secret entry

AWS KMS Secret entry

Azure Key Vault Secret entry

Service Principal with Secret

Service Principal with Certificate

az generated Service Principal

Managed Identity with Client ID

GCP KMS Secret entry

Hashicorp Vault Secret entry

Working with Kustomizations

Recommended settings

Generating a kustomization.yaml file

Controlling the apply behavior of resources

kustomize.toolkit.fluxcd.io/ssa

Override

Merge

IfNotPresent

Ignore

kustomize.toolkit.fluxcd.io/force

kustomize.toolkit.fluxcd.io/prune

Role-based access control

Enforcing impersonation

Remote clusters/Cluster-API

Controller global decryption

AWS KMS

Azure Key Vault

Workload Identity

Kubelet Identity

GCP KMS

Hashicorp Vault

Kustomize secretGenerator

Post build substitution of numbers and booleans

Triggering a reconcile

Waiting for Ready

Suspending and resuming

Suspend a Kustomization

Resume a Kustomization

Debugging a Kustomization

Describe the Kustomization

Trace emitted Events

Kustomization Status

Conditions

Reconciling Kustomization

Ready Kustomization

Failed Kustomization

Inventory

Last applied revision

Last attempted revision

`az` generated Service Principal

Generating a `kustomization.yaml` file

`kustomize.toolkit.fluxcd.io/ssa`

`kustomize.toolkit.fluxcd.io/force`

`kustomize.toolkit.fluxcd.io/prune`

Waiting for `Ready`