diff --git a/README.md b/README.md
index 4fa339d637..79613b855b 100644
--- a/README.md
+++ b/README.md
@@ -212,6 +212,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
| Status | Device(s) | Name | Release | Notes |
| :----: | :-------: | ---- | :-----: | :---- |
+| :yellow_heart: | STM32G030K8 | [Aurora One](https://www.bfy.kr/aurora-one/) | **2.0.0** |
| :yellow_heart: | STM32G030K6
STM32G030K8 | Generic Board | **2.0.0** | |
| :yellow_heart: | STM32G031J4
STM32G031J6 | Generic Board | **2.0.0** | |
| :yellow_heart: | STM32G041J6 | Generic Board | **2.0.0** | |
diff --git a/boards.txt b/boards.txt
index 26354b9ebd..a98c8aa8a0 100644
--- a/boards.txt
+++ b/boards.txt
@@ -1691,6 +1691,15 @@ GenG0.build.series=STM32G0xx
GenG0.build.cmsis_lib_gcc=arm_cortexM0l_math
GenG0.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -D__CORTEX_SC=0
+# Aurora One G030K8
+GenG0.menu.pnum.AURORA_ONE=Aurora One
+GenG0.menu.pnum.AURORA_ONE.upload.maximum_size=65536
+GenG0.menu.pnum.AURORA_ONE.upload.maximum_data_size=8192
+GenG0.menu.pnum.AURORA_ONE.build.board=AURORA_ONE
+GenG0.menu.pnum.AURORA_ONE.build.product_line=STM32G030xx
+GenG0.menu.pnum.AURORA_ONE.build.variant=STM32G0xx/G030K(6-8)T
+GenG0.menu.pnum.AURORA_ONE.build.variant_h=variant_{build.board}.h
+
# Generic G030K6Tx
GenG0.menu.pnum.GENERIC_G030K6TX=Generic G030K6Tx
GenG0.menu.pnum.GENERIC_G030K6TX.upload.maximum_size=32768
diff --git a/variants/STM32G0xx/G030K(6-8)T/variant_AURORA_ONE.cpp b/variants/STM32G0xx/G030K(6-8)T/variant_AURORA_ONE.cpp
new file mode 100644
index 0000000000..6943671924
--- /dev/null
+++ b/variants/STM32G0xx/G030K(6-8)T/variant_AURORA_ONE.cpp
@@ -0,0 +1,119 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#if defined(ARDUINO_AURORA_ONE)
+#include "pins_arduino.h"
+
+// Digital PinName array
+const PinName digitalPin[] = {
+ PA_10, //D0
+ PA_9, //D1
+ PA_6, //D2/A6
+ PA_7, //D3/A7
+ PA_8, //D4
+ PC_6, //D5
+ PA_11, //D6/A10
+ PA_12, //D7/A11
+ PB_2, //D8/A12
+ PB_1, //D9/A9
+ PB_0, //D10/A8
+ PB_5, //D11
+ PB_4, //D12
+ PB_3, //D13/LED
+ PB_7, //D14/A13
+ PB_6, //D15
+ PB_9, //D16/MAINSL
+ PB_8, //D17/MAINSL
+ PA_15, //D18/MAINSL
+ PA_14, //D19/A14/SWCLK
+ PA_13, //D20/A15/SWDIO
+ PA_0, //D21/A0
+ PA_1, //D22/A1
+ PA_2, //D23/A2
+ PA_3, //D24/A3
+ PA_4, //D25/A4
+ PA_5, //D26/A5
+ PA_9_R, //D27
+ PA_10_R //D28
+};
+
+// Analog (Ax) pin number array
+const uint32_t analogInputPin[] = {
+ 21, //A0
+ 22, //A1
+ 23, //A2
+ 24, //A3
+ 25, //A4
+ 26, //A5
+ 2, //A6
+ 3, //A7
+ 10, //A8
+ 9, //A9
+ 6, //A10
+ 7, //A11
+ 8, //A12
+ 14, //A13
+ 19, //A14
+ 20 //A15
+};
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief System Clock Configuration
+ * @param None
+ * @retval None
+ */
+WEAK void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
+
+ /* Configure the main internal regulator output voltage */
+ HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+ /*
+ * Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+ RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+ RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1;
+ RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+ RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
+ RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
+ RCC_OscInitStruct.PLL.PLLN = 8;
+ RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+ RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+ Error_Handler();
+ }
+ /* Initializes the CPU, AHB and APB buses clocks */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
+ | RCC_CLOCKTYPE_PCLK1;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+ Error_Handler();
+ }
+}
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* ARDUINO_AURORA_ONE */
diff --git a/variants/STM32G0xx/G030K(6-8)T/variant_AURORA_ONE.h b/variants/STM32G0xx/G030K(6-8)T/variant_AURORA_ONE.h
new file mode 100644
index 0000000000..617e374273
--- /dev/null
+++ b/variants/STM32G0xx/G030K(6-8)T/variant_AURORA_ONE.h
@@ -0,0 +1,120 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#pragma once
+
+/*----------------------------------------------------------------------------
+ * STM32 pins number
+ *----------------------------------------------------------------------------*/
+#define PA10 0
+#define PA9 1
+#define PA6 PIN_A6
+#define PA7 PIN_A7
+#define PA8 4
+#define PC6 5
+#define PA11 PIN_A10
+#define PA12 PIN_A11
+#define PB2 PIN_A12
+#define PB1 PIN_A9
+#define PB0 PIN_A8
+#define PB5 11
+#define PB4 12
+#define PB3 13 // LED
+#define PB7 PIN_A13
+#define PB6 15
+#define PB9 16
+#define PB8 17
+#define PA15 18
+#define PA14 PIN_A14 // SWD / BOOT0
+#define PA13 PIN_A15 // SWD
+#define PA0 PIN_A0
+#define PA1 PIN_A1
+#define PA2 PIN_A2
+#define PA3 PIN_A3
+#define PA4 PIN_A4
+#define PA5 PIN_A5
+#define PA9_R 27
+#define PA10_R 28
+// #define PC14 29 // OSC32IN
+// #define PC15 30 // OSC32OUT
+
+// Alternate pins number
+#define PA6_ALT1 (PA6 | ALT1)
+#define PA7_ALT1 (PA7 | ALT1)
+#define PA7_ALT2 (PA7 | ALT2)
+#define PA7_ALT3 (PA7 | ALT3)
+#define PB0_ALT1 (PB0 | ALT1)
+#define PB1_ALT1 (PB1 | ALT1)
+#define PB1_ALT2 (PB1 | ALT2)
+#define PB6_ALT1 (PB6 | ALT1)
+
+#define NUM_DIGITAL_PINS 29
+#define NUM_REMAP_PINS 2
+#define NUM_ANALOG_INPUTS 16
+
+// On-board LED pin number
+#ifndef LED_BUILTIN
+ #define LED_BUILTIN PB3
+#endif
+#define LED_GREEN LED_BUILTIN
+
+// On-board user button
+#ifndef USER_BTN
+ #define USER_BTN PA8
+#endif
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#ifndef TIMER_TONE
+ #define TIMER_TONE TIM14
+#endif
+#ifndef TIMER_SERVO
+ #define TIMER_SERVO TIM16
+#endif
+
+// UART Definitions
+#ifndef SERIAL_UART_INSTANCE
+ #define SERIAL_UART_INSTANCE 2 //Connected to Aurora Connect Lite
+#endif
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#ifndef PIN_SERIAL_RX
+ #define PIN_SERIAL_RX PA10
+#endif
+#ifndef PIN_SERIAL_TX
+ #define PIN_SERIAL_TX PA9
+#endif
+
+/*----------------------------------------------------------------------------
+ * Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ // These serial port names are intended to allow libraries and architecture-neutral
+ // sketches to automatically default to the correct port name for a particular type
+ // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+ // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+ //
+ // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+ //
+ // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+ //
+ // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+ //
+ // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+ //
+ // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+ // pins are NOT connected to anything by default.
+ #define SERIAL_PORT_MONITOR Serial
+ #define SERIAL_PORT_HARDWARE Serial2
+#endif