From 7274550089a817c87e4e25f608705f77c6ec64a0 Mon Sep 17 00:00:00 2001 From: Frederic Pillon Date: Fri, 11 Dec 2020 17:18:07 +0100 Subject: [PATCH] [variant] Update Generic F0xx Moved to the generic variant: - DEMO F030F4 - DISCO F030R8 - DISCO F072RB - EEXTR_F030_V1 - ELEKTOR_F072Cx - MALYANMx00_F070CB - Nucleo F030R8 - Nucleo F031K6 - Nucleo F072RB - Nucleo F091RC - PYBSTICK26_DUINO - WRAITH32 V1 Supersede #1080 Signed-off-by: Frederic Pillon --- CI/build/conf/cores_config.json | 8 +- README.md | 15 +- boards.txt | 176 ++++++++-- .../STM32F0xx/DEMO_F030F4/PeripheralPins.c | 164 --------- variants/STM32F0xx/DEMO_F030F4/ldscript.ld | 188 ----------- .../STM32F0xx/DISCO_F030R8/PeripheralPins.c | 212 ------------ variants/STM32F0xx/DISCO_F030R8/ldscript.ld | 186 ----------- variants/STM32F0xx/DISCO_F030R8/variant.cpp | 174 ---------- variants/STM32F0xx/DISCO_F030R8/variant.h | 167 ---------- .../STM32F0xx/DISCO_F072RB/PeripheralPins.c | 312 ------------------ variants/STM32F0xx/DISCO_F072RB/ldscript.ld | 188 ----------- variants/STM32F0xx/DISCO_F072RB/variant.cpp | 187 ----------- variants/STM32F0xx/DISCO_F072RB/variant.h | 179 ---------- .../STM32F0xx/EEXTR_F030_V1/PeripheralPins.c | 202 ------------ .../STM32F0xx/EEXTR_F030_V1/PinNamesVar.h | 25 -- variants/STM32F0xx/EEXTR_F030_V1/ldscript.ld | 186 ----------- .../STM32F0xx/ELEKTOR_F072Cx/PeripheralPins.c | 246 -------------- variants/STM32F0xx/ELEKTOR_F072Cx/variant.cpp | 137 -------- .../STM32F0xx/Generic_F030C8/PeripheralPins.c | 197 +++++++++++ .../PeripheralPins_EEXTR_F030_V1.c | 197 +++++++++++ .../PinNamesVar.h | 14 + .../ldscript.ld | 109 +++--- variants/STM32F0xx/Generic_F030C8/variant.cpp | 173 ++++++++++ variants/STM32F0xx/Generic_F030C8/variant.h | 174 ++++++++++ .../variant_EEXTR_F030_V1.cpp} | 107 +++--- .../variant_EEXTR_F030_V1.h} | 122 ++++--- .../STM32F0xx/Generic_F030F4/PeripheralPins.c | 157 +++++++++ .../PinNamesVar.h | 10 + .../ldscript.ld | 107 +++--- variants/STM32F0xx/Generic_F030F4/variant.cpp | 147 +++++++++ variants/STM32F0xx/Generic_F030F4/variant.h | 134 ++++++++ .../variant_DEMO_F030F4.cpp} | 47 +-- .../variant_DEMO_F030F4.h} | 101 +++--- .../STM32F0xx/Generic_F030R8/PeripheralPins.c | 205 ++++++++++++ .../PinNamesVar.h | 14 + variants/STM32F0xx/Generic_F030R8/ldscript.ld | 175 ++++++++++ variants/STM32F0xx/Generic_F030R8/variant.cpp | 195 +++++++++++ variants/STM32F0xx/Generic_F030R8/variant.h | 191 +++++++++++ .../Generic_F030R8/variant_DISCO_F030R8.cpp | 150 +++++++++ .../Generic_F030R8/variant_DISCO_F030R8.h | 195 +++++++++++ .../Generic_F030R8/variant_NUCLEO_F030R8.cpp | 152 +++++++++ .../Generic_F030R8/variant_NUCLEO_F030R8.h | 165 +++++++++ .../Generic_F031K6T/PeripheralPins.c | 184 +++++++++++ .../PinNamesVar.h | 11 + .../ldscript.ld | 20 +- .../STM32F0xx/Generic_F031K6T/variant.cpp | 155 +++++++++ variants/STM32F0xx/Generic_F031K6T/variant.h | 157 +++++++++ .../Generic_F031K6T/variant_NUCLEO_F031K6.cpp | 109 ++++++ .../Generic_F031K6T/variant_NUCLEO_F031K6.h | 134 ++++++++ .../Generic_F051KxU/PeripheralPins.c | 208 ++++++++++++ .../PeripheralPins_WRAITH32_V1.c | 193 +++++++++++ .../PinNamesVar.h | 15 +- .../STM32F0xx/Generic_F051KxU/ldscript.ld | 175 ++++++++++ .../readme_WRAITH32_V1.txt} | 0 .../STM32F0xx/Generic_F051KxU/variant.cpp | 157 +++++++++ variants/STM32F0xx/Generic_F051KxU/variant.h | 164 +++++++++ .../Generic_F051KxU/variant_WRAITH32_V1.cpp | 110 ++++++ .../Generic_F051KxU/variant_WRAITH32_V1.h | 136 ++++++++ .../MALYANMx00_F070CB.ld} | 2 +- .../STM32F0xx/Generic_F070CB/PeripheralPins.c | 217 ++++++++++++ .../PinNamesVar.h | 17 +- .../ldscript.ld | 2 +- .../startup_Mx00_f070xb.S | 0 variants/STM32F0xx/Generic_F070CB/variant.cpp | 179 ++++++++++ variants/STM32F0xx/Generic_F070CB/variant.h | 172 ++++++++++ .../variant_MALYANMx00_F070CB.cpp} | 102 +++--- .../variant_MALYANMx00_F070CB.h} | 118 ++++--- .../STM32F0xx/Generic_F072Cx/PeripheralPins.c | 252 ++++++++++++++ .../PeripheralPins_ELEKTOR_F072Cx.c | 252 ++++++++++++++ .../PinNamesVar.h | 20 +- variants/STM32F0xx/Generic_F072Cx/ldscript.ld | 175 ++++++++++ variants/STM32F0xx/Generic_F072Cx/variant.cpp | 176 ++++++++++ variants/STM32F0xx/Generic_F072Cx/variant.h | 178 ++++++++++ .../Generic_F072Cx/variant_ELEKTOR_F072Cx.cpp | 107 ++++++ .../variant_ELEKTOR_F072Cx.h} | 126 +++---- .../STM32F0xx/Generic_F072Rx/PeripheralPins.c | 272 +++++++++++++++ .../PeripheralPins_PYBSTICK26_DUINO.c | 271 +++++++++++++++ .../PinNamesVar.h | 22 +- variants/STM32F0xx/Generic_F072Rx/ldscript.ld | 175 ++++++++++ variants/STM32F0xx/Generic_F072Rx/variant.cpp | 197 +++++++++++ variants/STM32F0xx/Generic_F072Rx/variant.h | 196 +++++++++++ .../Generic_F072Rx/variant_DISCO_F072RB.cpp | 172 ++++++++++ .../Generic_F072Rx/variant_DISCO_F072RB.h | 213 ++++++++++++ .../Generic_F072Rx/variant_NUCLEO_F072RB.cpp | 154 +++++++++ .../Generic_F072Rx/variant_NUCLEO_F072RB.h | 165 +++++++++ .../variant_PYBSTICK26_DUINO.cpp} | 29 +- .../Generic_F072Rx/variant_PYBSTICK26_DUINO.h | 167 ++++++++++ .../STM32F0xx/Generic_F091Rx/PeripheralPins.c | 283 ++++++++++++++++ .../STM32F0xx/Generic_F091Rx/PinNamesVar.h | 46 +++ variants/STM32F0xx/Generic_F091Rx/ldscript.ld | 175 ++++++++++ variants/STM32F0xx/Generic_F091Rx/variant.cpp | 187 +++++++++++ variants/STM32F0xx/Generic_F091Rx/variant.h | 198 +++++++++++ .../variant_NUCLEO_F091RC.cpp} | 55 +-- .../Generic_F091Rx/variant_NUCLEO_F091RC.h | 170 ++++++++++ .../MALYANMx00_F070CB/PeripheralPins.c | 228 ------------- .../STM32F0xx/NUCLEO_F030R8/PeripheralPins.c | 212 ------------ variants/STM32F0xx/NUCLEO_F030R8/ldscript.ld | 186 ----------- variants/STM32F0xx/NUCLEO_F030R8/variant.cpp | 161 --------- variants/STM32F0xx/NUCLEO_F030R8/variant.h | 142 -------- .../STM32F0xx/NUCLEO_F031K6/PeripheralPins.c | 176 ---------- variants/STM32F0xx/NUCLEO_F031K6/variant.cpp | 108 ------ variants/STM32F0xx/NUCLEO_F031K6/variant.h | 107 ------ .../STM32F0xx/NUCLEO_F072RB/PeripheralPins.c | 265 --------------- .../STM32F0xx/NUCLEO_F072RB/PinNamesVar.h | 31 -- variants/STM32F0xx/NUCLEO_F072RB/ldscript.ld | 188 ----------- variants/STM32F0xx/NUCLEO_F072RB/variant.h | 140 -------- .../STM32F0xx/NUCLEO_F091RC/PeripheralPins.c | 290 ---------------- .../STM32F0xx/NUCLEO_F091RC/PinNamesVar.h | 25 -- variants/STM32F0xx/NUCLEO_F091RC/ldscript.ld | 180 ---------- variants/STM32F0xx/NUCLEO_F091RC/variant.cpp | 137 -------- variants/STM32F0xx/NUCLEO_F091RC/variant.h | 140 -------- .../PYBSTICK26_DUINO/PeripheralPins.c | 265 --------------- .../STM32F0xx/PYBSTICK26_DUINO/PinNamesVar.h | 31 -- variants/STM32F0xx/PYBSTICK26_DUINO/variant.h | 159 --------- .../WRAITH32_F051K6/PeripheralPins.c | 185 ----------- .../STM32F0xx/WRAITH32_F051K6/variant.cpp | 106 ------ variants/STM32F0xx/WRAITH32_F051K6/variant.h | 113 ------- .../Generic_G030Kx/variant_AURORA_ONE.h | 13 + 118 files changed, 10023 insertions(+), 6925 deletions(-) delete mode 100644 variants/STM32F0xx/DEMO_F030F4/PeripheralPins.c delete mode 100644 variants/STM32F0xx/DEMO_F030F4/ldscript.ld delete mode 100644 variants/STM32F0xx/DISCO_F030R8/PeripheralPins.c delete mode 100644 variants/STM32F0xx/DISCO_F030R8/ldscript.ld delete mode 100644 variants/STM32F0xx/DISCO_F030R8/variant.cpp delete mode 100644 variants/STM32F0xx/DISCO_F030R8/variant.h delete mode 100644 variants/STM32F0xx/DISCO_F072RB/PeripheralPins.c delete mode 100644 variants/STM32F0xx/DISCO_F072RB/ldscript.ld delete mode 100644 variants/STM32F0xx/DISCO_F072RB/variant.cpp delete mode 100644 variants/STM32F0xx/DISCO_F072RB/variant.h delete mode 100644 variants/STM32F0xx/EEXTR_F030_V1/PeripheralPins.c delete mode 100644 variants/STM32F0xx/EEXTR_F030_V1/PinNamesVar.h delete mode 100644 variants/STM32F0xx/EEXTR_F030_V1/ldscript.ld delete mode 100644 variants/STM32F0xx/ELEKTOR_F072Cx/PeripheralPins.c delete mode 100644 variants/STM32F0xx/ELEKTOR_F072Cx/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F030C8/PeripheralPins.c create mode 100644 variants/STM32F0xx/Generic_F030C8/PeripheralPins_EEXTR_F030_V1.c rename variants/STM32F0xx/{NUCLEO_F031K6 => Generic_F030C8}/PinNamesVar.h (56%) rename variants/STM32F0xx/{WRAITH32_F051K6 => Generic_F030C8}/ldscript.ld (53%) create mode 100644 variants/STM32F0xx/Generic_F030C8/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F030C8/variant.h rename variants/STM32F0xx/{EEXTR_F030_V1/variant.cpp => Generic_F030C8/variant_EEXTR_F030_V1.cpp} (55%) rename variants/STM32F0xx/{EEXTR_F030_V1/variant.h => Generic_F030C8/variant_EEXTR_F030_V1.h} (53%) create mode 100644 variants/STM32F0xx/Generic_F030F4/PeripheralPins.c rename variants/STM32F0xx/{DEMO_F030F4 => Generic_F030F4}/PinNamesVar.h (67%) rename variants/STM32F0xx/{ELEKTOR_F072Cx => Generic_F030F4}/ldscript.ld (51%) create mode 100644 variants/STM32F0xx/Generic_F030F4/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F030F4/variant.h rename variants/STM32F0xx/{DEMO_F030F4/variant.cpp => Generic_F030F4/variant_DEMO_F030F4.cpp} (56%) rename variants/STM32F0xx/{DEMO_F030F4/variant.h => Generic_F030F4/variant_DEMO_F030F4.h} (51%) create mode 100644 variants/STM32F0xx/Generic_F030R8/PeripheralPins.c rename variants/STM32F0xx/{NUCLEO_F030R8 => Generic_F030R8}/PinNamesVar.h (56%) create mode 100644 variants/STM32F0xx/Generic_F030R8/ldscript.ld create mode 100644 variants/STM32F0xx/Generic_F030R8/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F030R8/variant.h create mode 100644 variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.cpp create mode 100644 variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.h create mode 100644 variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.cpp create mode 100644 variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.h create mode 100644 variants/STM32F0xx/Generic_F031K6T/PeripheralPins.c rename variants/STM32F0xx/{DISCO_F030R8 => Generic_F031K6T}/PinNamesVar.h (65%) rename variants/STM32F0xx/{NUCLEO_F031K6 => Generic_F031K6T}/ldscript.ld (93%) create mode 100644 variants/STM32F0xx/Generic_F031K6T/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F031K6T/variant.h create mode 100644 variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.cpp create mode 100644 variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.h create mode 100644 variants/STM32F0xx/Generic_F051KxU/PeripheralPins.c create mode 100644 variants/STM32F0xx/Generic_F051KxU/PeripheralPins_WRAITH32_V1.c rename variants/STM32F0xx/{WRAITH32_F051K6 => Generic_F051KxU}/PinNamesVar.h (59%) create mode 100644 variants/STM32F0xx/Generic_F051KxU/ldscript.ld rename variants/STM32F0xx/{WRAITH32_F051K6/readme.txt => Generic_F051KxU/readme_WRAITH32_V1.txt} (100%) create mode 100644 variants/STM32F0xx/Generic_F051KxU/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F051KxU/variant.h create mode 100644 variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.cpp create mode 100644 variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.h rename variants/STM32F0xx/{MALYANMx00_F070CB/ldscript.ld => Generic_F070CB/MALYANMx00_F070CB.ld} (97%) create mode 100644 variants/STM32F0xx/Generic_F070CB/PeripheralPins.c rename variants/STM32F0xx/{MALYANMx00_F070CB => Generic_F070CB}/PinNamesVar.h (57%) rename variants/STM32F0xx/{PYBSTICK26_DUINO => Generic_F070CB}/ldscript.ld (98%) rename variants/STM32F0xx/{MALYANMx00_F070CB => Generic_F070CB}/startup_Mx00_f070xb.S (100%) create mode 100644 variants/STM32F0xx/Generic_F070CB/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F070CB/variant.h rename variants/STM32F0xx/{MALYANMx00_F070CB/variant.cpp => Generic_F070CB/variant_MALYANMx00_F070CB.cpp} (64%) rename variants/STM32F0xx/{MALYANMx00_F070CB/variant.h => Generic_F070CB/variant_MALYANMx00_F070CB.h} (62%) create mode 100644 variants/STM32F0xx/Generic_F072Cx/PeripheralPins.c create mode 100644 variants/STM32F0xx/Generic_F072Cx/PeripheralPins_ELEKTOR_F072Cx.c rename variants/STM32F0xx/{ELEKTOR_F072Cx => Generic_F072Cx}/PinNamesVar.h (57%) create mode 100644 variants/STM32F0xx/Generic_F072Cx/ldscript.ld create mode 100644 variants/STM32F0xx/Generic_F072Cx/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F072Cx/variant.h create mode 100644 variants/STM32F0xx/Generic_F072Cx/variant_ELEKTOR_F072Cx.cpp rename variants/STM32F0xx/{ELEKTOR_F072Cx/variant.h => Generic_F072Cx/variant_ELEKTOR_F072Cx.h} (52%) create mode 100644 variants/STM32F0xx/Generic_F072Rx/PeripheralPins.c create mode 100644 variants/STM32F0xx/Generic_F072Rx/PeripheralPins_PYBSTICK26_DUINO.c rename variants/STM32F0xx/{DISCO_F072RB => Generic_F072Rx}/PinNamesVar.h (52%) create mode 100644 variants/STM32F0xx/Generic_F072Rx/ldscript.ld create mode 100644 variants/STM32F0xx/Generic_F072Rx/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F072Rx/variant.h create mode 100644 variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.cpp create mode 100644 variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.h create mode 100644 variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.cpp create mode 100644 variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.h rename variants/STM32F0xx/{PYBSTICK26_DUINO/variant.cpp => Generic_F072Rx/variant_PYBSTICK26_DUINO.cpp} (61%) create mode 100644 variants/STM32F0xx/Generic_F072Rx/variant_PYBSTICK26_DUINO.h create mode 100644 variants/STM32F0xx/Generic_F091Rx/PeripheralPins.c create mode 100644 variants/STM32F0xx/Generic_F091Rx/PinNamesVar.h create mode 100644 variants/STM32F0xx/Generic_F091Rx/ldscript.ld create mode 100644 variants/STM32F0xx/Generic_F091Rx/variant.cpp create mode 100644 variants/STM32F0xx/Generic_F091Rx/variant.h rename variants/STM32F0xx/{NUCLEO_F072RB/variant.cpp => Generic_F091Rx/variant_NUCLEO_F091RC.cpp} (64%) create mode 100644 variants/STM32F0xx/Generic_F091Rx/variant_NUCLEO_F091RC.h delete mode 100644 variants/STM32F0xx/MALYANMx00_F070CB/PeripheralPins.c delete mode 100644 variants/STM32F0xx/NUCLEO_F030R8/PeripheralPins.c delete mode 100644 variants/STM32F0xx/NUCLEO_F030R8/ldscript.ld delete mode 100644 variants/STM32F0xx/NUCLEO_F030R8/variant.cpp delete mode 100644 variants/STM32F0xx/NUCLEO_F030R8/variant.h delete mode 100644 variants/STM32F0xx/NUCLEO_F031K6/PeripheralPins.c delete mode 100644 variants/STM32F0xx/NUCLEO_F031K6/variant.cpp delete mode 100644 variants/STM32F0xx/NUCLEO_F031K6/variant.h delete mode 100644 variants/STM32F0xx/NUCLEO_F072RB/PeripheralPins.c delete mode 100644 variants/STM32F0xx/NUCLEO_F072RB/PinNamesVar.h delete mode 100644 variants/STM32F0xx/NUCLEO_F072RB/ldscript.ld delete mode 100644 variants/STM32F0xx/NUCLEO_F072RB/variant.h delete mode 100644 variants/STM32F0xx/NUCLEO_F091RC/PeripheralPins.c delete mode 100644 variants/STM32F0xx/NUCLEO_F091RC/PinNamesVar.h delete mode 100644 variants/STM32F0xx/NUCLEO_F091RC/ldscript.ld delete mode 100644 variants/STM32F0xx/NUCLEO_F091RC/variant.cpp delete mode 100644 variants/STM32F0xx/NUCLEO_F091RC/variant.h delete mode 100644 variants/STM32F0xx/PYBSTICK26_DUINO/PeripheralPins.c delete mode 100644 variants/STM32F0xx/PYBSTICK26_DUINO/PinNamesVar.h delete mode 100644 variants/STM32F0xx/PYBSTICK26_DUINO/variant.h delete mode 100644 variants/STM32F0xx/WRAITH32_F051K6/PeripheralPins.c delete mode 100644 variants/STM32F0xx/WRAITH32_F051K6/variant.cpp delete mode 100644 variants/STM32F0xx/WRAITH32_F051K6/variant.h diff --git a/CI/build/conf/cores_config.json b/CI/build/conf/cores_config.json index 479420f736..54d89eb1cd 100644 --- a/CI/build/conf/cores_config.json +++ b/CI/build/conf/cores_config.json @@ -134,7 +134,7 @@ "RAK811_TRACKER", "REMRAM_V1", "Sparky_V1", - "Wraith32_V1" + "WRAITH32_V1" ] }, { @@ -153,7 +153,7 @@ "boards": [ "EEXTR_F030_V1", "ELEKTOR_F072C8", "ELEKTOR_F072CB", "FYSETC_S6", "Generic_F103ZG", "MALYANM200_F103CB", "PRNTR_V2", "PX_HER0", "STEVAL_MKSBOX1V1", "VAKE_F446VE", - "VCCGND_F103ZET6", "VCCGND_F103ZET6Mini", "Wraith32_V1" + "VCCGND_F103ZET6", "VCCGND_F103ZET6Mini", "WRAITH32_V1" ] }, { @@ -282,7 +282,7 @@ { "pattern": "SerialLoop|Tests_basic_functions", "applicable": false, - "boards": [ "NUCLEO_F031K6", "NUCLEO_L031K6", "Wraith32_V1" ] + "boards": [ "NUCLEO_F031K6", "NUCLEO_L031K6", "WRAITH32_V1" ] }, { "pattern": "(Alarm)?TimedWak(e)?up|SerialDeepSleep", @@ -298,7 +298,7 @@ "pattern": "tone|p07_Keyboard", "applicable": false, "boards": [ - "ST3DP001_EVAL", "STEVAL_MKSBOX1V1", "VAKE_F446VE", "Wraith32_V1" + "ST3DP001_EVAL", "STEVAL_MKSBOX1V1", "VAKE_F446VE", "WRAITH32_V1" ] }, { diff --git a/README.md b/README.md index f997c3e5cf..2104c59686 100644 --- a/README.md +++ b/README.md @@ -111,7 +111,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | Status | Device(s) | Name | Release | Notes | | :----: | :-------: | ---- | :-----: | :---- | -| :green_heart: | STM32F031K6 | [Nucleo F031K6](https://www.st.com/en/evaluation-tools/nucleo-f031k6.html) | *1.9.0* | | +| :green_heart: | STM32F031K6T | [Nucleo F031K6](https://www.st.com/en/evaluation-tools/nucleo-f031k6.html) | *1.9.0* | | | :green_heart: | STM32F303K8 | [Nucleo F303K8](http://www.st.com/en/evaluation-tools/nucleo-f303k8.html) | *1.1.0* | | | :yellow_heart: | STM32G031K8 | [Nucleo G031K8](https://www.st.com/en/evaluation-tools/nucleo-g031k8.html) | **2.0.0** | | :green_heart: | STM32G431KB | [Nucleo G431KB](https://www.st.com/en/evaluation-tools/nucleo-g431kb.html) | *1.7.0* | | @@ -151,7 +151,16 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | Status | Device(s) | Name | Release | Notes | | :----: | :-------: | ---- | :-----: | :---- | -| :green_heart: | STM32F030F4 | [STM32F030F4 Demo board](https://stm32-base.org/boards/STM32F030F4P6-STM32F030-DEMO-BOARD-V1.1) | *1.5.0* | | +| :green_heart: | STM32F030F4 | [STM32F030F4 Demo board](https://stm32-base.org/boards/STM32F030F4P6-STM32F030-DEMO-BOARD-V1.1) | *1.5.0* | | +| :yellow_heart: | STM32F030C8 | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F030F4 | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F030R8 | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F031K6T | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F051K4U
STM32F051K6U
STM32F051K8U | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F070CB | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F072C8
STM32F072CB | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F072R8
STM32F072RB | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F091RB
STM32F091RC | Generic Board | **2.0.0** | | ### Generic STM32F1 boards @@ -277,7 +286,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | Status | Device(s) | Name | Release | Notes | | :----: | :-------: | ---- | :-----: | :---- | -| :green_heart: | STM32F051K6 | Wraith V1 ESC | *1.8.0* | | +| :green_heart: | STM32F051K6U | [Wraith V1 ESC](https://www.readytoflyquads.com/35a-wraith32-v11-32bit-blheli-esc) | *1.8.0* | | ### Generic flight controllers diff --git a/boards.txt b/boards.txt index f988ff569a..865fdecb18 100644 --- a/boards.txt +++ b/boards.txt @@ -200,7 +200,7 @@ Nucleo_64.menu.pnum.NUCLEO_F030R8.build.mcu=cortex-m0 Nucleo_64.menu.pnum.NUCLEO_F030R8.build.board=NUCLEO_F030R8 Nucleo_64.menu.pnum.NUCLEO_F030R8.build.series=STM32F0xx Nucleo_64.menu.pnum.NUCLEO_F030R8.build.product_line=STM32F030x8 -Nucleo_64.menu.pnum.NUCLEO_F030R8.build.variant=STM32F0xx/NUCLEO_F030R8 +Nucleo_64.menu.pnum.NUCLEO_F030R8.build.variant=STM32F0xx/Generic_F030R8 Nucleo_64.menu.pnum.NUCLEO_F030R8.build.cmsis_lib_gcc=arm_cortexM0l_math # NUCLEO_F072RB board @@ -212,7 +212,7 @@ Nucleo_64.menu.pnum.NUCLEO_F072RB.build.mcu=cortex-m0 Nucleo_64.menu.pnum.NUCLEO_F072RB.build.board=NUCLEO_F072RB Nucleo_64.menu.pnum.NUCLEO_F072RB.build.series=STM32F0xx Nucleo_64.menu.pnum.NUCLEO_F072RB.build.product_line=STM32F072xB -Nucleo_64.menu.pnum.NUCLEO_F072RB.build.variant=STM32F0xx/NUCLEO_F072RB +Nucleo_64.menu.pnum.NUCLEO_F072RB.build.variant=STM32F0xx/Generic_F072Rx Nucleo_64.menu.pnum.NUCLEO_F072RB.build.cmsis_lib_gcc=arm_cortexM0l_math # NUCLEO_F091RC board @@ -224,7 +224,7 @@ Nucleo_64.menu.pnum.NUCLEO_F091RC.build.mcu=cortex-m0 Nucleo_64.menu.pnum.NUCLEO_F091RC.build.board=NUCLEO_F091RC Nucleo_64.menu.pnum.NUCLEO_F091RC.build.series=STM32F0xx Nucleo_64.menu.pnum.NUCLEO_F091RC.build.product_line=STM32F091xC -Nucleo_64.menu.pnum.NUCLEO_F091RC.build.variant=STM32F0xx/NUCLEO_F091RC +Nucleo_64.menu.pnum.NUCLEO_F091RC.build.variant=STM32F0xx/Generic_F091Rx Nucleo_64.menu.pnum.NUCLEO_F091RC.build.cmsis_lib_gcc=arm_cortexM0l_math # NUCLEO_F103RB board @@ -484,7 +484,7 @@ Nucleo_32.menu.pnum.NUCLEO_F031K6.build.mcu=cortex-m0 Nucleo_32.menu.pnum.NUCLEO_F031K6.build.board=NUCLEO_F031K6 Nucleo_32.menu.pnum.NUCLEO_F031K6.build.series=STM32F0xx Nucleo_32.menu.pnum.NUCLEO_F031K6.build.product_line=STM32F031x6 -Nucleo_32.menu.pnum.NUCLEO_F031K6.build.variant=STM32F0xx/NUCLEO_F031K6 +Nucleo_32.menu.pnum.NUCLEO_F031K6.build.variant=STM32F0xx/Generic_F031K6T Nucleo_32.menu.pnum.NUCLEO_F031K6.build.cmsis_lib_gcc=arm_cortexM0l_math # NUCLEO_F303K8 board @@ -602,7 +602,7 @@ Disco.menu.pnum.DISCO_F030R8.build.mcu=cortex-m0 Disco.menu.pnum.DISCO_F030R8.build.board=DISCO_F030R8 Disco.menu.pnum.DISCO_F030R8.build.series=STM32F0xx Disco.menu.pnum.DISCO_F030R8.build.product_line=STM32F030x8 -Disco.menu.pnum.DISCO_F030R8.build.variant=STM32F0xx/DISCO_F030R8 +Disco.menu.pnum.DISCO_F030R8.build.variant=STM32F0xx/Generic_F030R8 Disco.menu.pnum.DISCO_F030R8.build.cmsis_lib_gcc=arm_cortexM0l_math # DISCO_F072RB board @@ -614,7 +614,7 @@ Disco.menu.pnum.DISCO_F072RB.build.mcu=cortex-m0 Disco.menu.pnum.DISCO_F072RB.build.board=DISCO_F072RB Disco.menu.pnum.DISCO_F072RB.build.series=STM32F0xx Disco.menu.pnum.DISCO_F072RB.build.product_line=STM32F072xB -Disco.menu.pnum.DISCO_F072RB.build.variant=STM32F0xx/DISCO_F072RB +Disco.menu.pnum.DISCO_F072RB.build.variant=STM32F0xx/Generic_F072Rx Disco.menu.pnum.DISCO_F072RB.build.cmsis_lib_gcc=arm_cortexM0l_math #DISCO_F100RB board @@ -821,28 +821,140 @@ GenF0.build.cmsis_lib_gcc=arm_cortexM0l_math GenF0.build.extra_flags=-D{build.product_line} {build.xSerial} # DEMO_F030F4 board -GenF0.menu.pnum.DEMO_F030F4=STM32F030F4 Demo board -GenF0.menu.pnum.DEMO_F030F4.upload.maximum_data_size=4096 +GenF0.menu.pnum.DEMO_F030F4=STM32F030F4 Demo board (HSE 8Mhz) GenF0.menu.pnum.DEMO_F030F4.upload.maximum_size=16384 +GenF0.menu.pnum.DEMO_F030F4.upload.maximum_data_size=4096 GenF0.menu.pnum.DEMO_F030F4.build.board=DEMO_F030F4 GenF0.menu.pnum.DEMO_F030F4.build.product_line=STM32F030x6 -GenF0.menu.pnum.DEMO_F030F4.build.variant=STM32F0xx/DEMO_F030F4 +GenF0.menu.pnum.DEMO_F030F4.build.variant=STM32F0xx/Generic_F030F4 # DEMO_F030F4_16M board -GenF0.menu.pnum.DEMO_F030F4_16M=STM32F030F4 Demo board (16Mhz) -GenF0.menu.pnum.DEMO_F030F4_16M.upload.maximum_data_size=4096 +GenF0.menu.pnum.DEMO_F030F4_16M=STM32F030F4 Demo board (HSE 16Mhz) GenF0.menu.pnum.DEMO_F030F4_16M.upload.maximum_size=16384 +GenF0.menu.pnum.DEMO_F030F4_16M.upload.maximum_data_size=4096 GenF0.menu.pnum.DEMO_F030F4_16M.build.board=DEMO_F030F4_16M GenF0.menu.pnum.DEMO_F030F4_16M.build.product_line=STM32F030x6 -GenF0.menu.pnum.DEMO_F030F4_16M.build.variant=STM32F0xx/DEMO_F030F4 +GenF0.menu.pnum.DEMO_F030F4_16M.build.variant=STM32F0xx/Generic_F030F4 # DEMO_F030F4_HSI board -GenF0.menu.pnum.DEMO_F030F4_HSI=STM32F030F4 Demo board (internal RC oscillator) -GenF0.menu.pnum.DEMO_F030F4_HSI.upload.maximum_data_size=4096 +GenF0.menu.pnum.DEMO_F030F4_HSI=STM32F030F4 Demo board (HSI internal RC oscillator) GenF0.menu.pnum.DEMO_F030F4_HSI.upload.maximum_size=16384 +GenF0.menu.pnum.DEMO_F030F4_HSI.upload.maximum_data_size=4096 GenF0.menu.pnum.DEMO_F030F4_HSI.build.board=DEMO_F030F4_HSI GenF0.menu.pnum.DEMO_F030F4_HSI.build.product_line=STM32F030x6 -GenF0.menu.pnum.DEMO_F030F4_HSI.build.variant=STM32F0xx/DEMO_F030F4 +GenF0.menu.pnum.DEMO_F030F4_HSI.build.variant=STM32F0xx/Generic_F030F4 + +# Generic F030C8 +GenF0.menu.pnum.GENERIC_F030C8=Generic F030C8 +GenF0.menu.pnum.GENERIC_F030C8.upload.maximum_size=65536 +GenF0.menu.pnum.GENERIC_F030C8.upload.maximum_data_size=8192 +GenF0.menu.pnum.GENERIC_F030C8.build.board=GENERIC_F030C8 +GenF0.menu.pnum.GENERIC_F030C8.build.product_line=STM32F030x8 +GenF0.menu.pnum.GENERIC_F030C8.build.variant=STM32F0xx/Generic_F030C8 + +# Generic F030F4 board +GenF0.menu.pnum.GENERIC_F030F4=Generic F030F4 +GenF0.menu.pnum.GENERIC_F030F4.upload.maximum_size=16384 +GenF0.menu.pnum.GENERIC_F030F4.upload.maximum_data_size=4096 +GenF0.menu.pnum.GENERIC_F030F4.build.board=GENERIC_F030F4 +GenF0.menu.pnum.GENERIC_F030F4.build.product_line=STM32F030x6 +GenF0.menu.pnum.GENERIC_F030F4.build.variant=STM32F0xx/Generic_F030F4 + +# Generic F030R8 +GenF0.menu.pnum.GENERIC_F030R8=Generic F030R8 +GenF0.menu.pnum.GENERIC_F030R8.upload.maximum_size=65536 +GenF0.menu.pnum.GENERIC_F030R8.upload.maximum_data_size=8192 +GenF0.menu.pnum.GENERIC_F030R8.build.board=GENERIC_F030R8 +GenF0.menu.pnum.GENERIC_F030R8.build.product_line=STM32F030x8 +GenF0.menu.pnum.GENERIC_F030R8.build.variant=STM32F0xx/Generic_F030R8 + +# Generic F031K6T +GenF0.menu.pnum.GENERIC_F031K6T=Generic F031K6T +GenF0.menu.pnum.GENERIC_F031K6T.upload.maximum_size=32768 +GenF0.menu.pnum.GENERIC_F031K6T.upload.maximum_data_size=4096 +GenF0.menu.pnum.GENERIC_F031K6T.build.board=GENERIC_F031K6T +GenF0.menu.pnum.GENERIC_F031K6T.build.product_line=STM32F031x6 +GenF0.menu.pnum.GENERIC_F031K6T.build.variant=STM32F0xx/Generic_F031K6T + +# Generic F051K4U +GenF0.menu.pnum.GENERIC_F051K4U=Generic F051K4U +GenF0.menu.pnum.GENERIC_F051K4U.upload.maximum_size=16384 +GenF0.menu.pnum.GENERIC_F051K4U.upload.maximum_data_size=8192 +GenF0.menu.pnum.GENERIC_F051K4U.build.board=GENERIC_F051K4U +GenF0.menu.pnum.GENERIC_F051K4U.build.product_line=STM32F051x8 +GenF0.menu.pnum.GENERIC_F051K4U.build.variant=STM32F0xx/Generic_F051KxU + +# Generic F051K6U +GenF0.menu.pnum.GENERIC_F051K6U=Generic F051K6U +GenF0.menu.pnum.GENERIC_F051K6U.upload.maximum_size=32768 +GenF0.menu.pnum.GENERIC_F051K6U.upload.maximum_data_size=8192 +GenF0.menu.pnum.GENERIC_F051K6U.build.board=GENERIC_F051K6U +GenF0.menu.pnum.GENERIC_F051K6U.build.product_line=STM32F051x8 +GenF0.menu.pnum.GENERIC_F051K6U.build.variant=STM32F0xx/Generic_F051KxU + +# Generic F051K8U +GenF0.menu.pnum.GENERIC_F051K8U=Generic F051K8U +GenF0.menu.pnum.GENERIC_F051K8U.upload.maximum_size=65536 +GenF0.menu.pnum.GENERIC_F051K8U.upload.maximum_data_size=8192 +GenF0.menu.pnum.GENERIC_F051K8U.build.board=GENERIC_F051K8U +GenF0.menu.pnum.GENERIC_F051K8U.build.product_line=STM32F051x8 +GenF0.menu.pnum.GENERIC_F051K8U.build.variant=STM32F0xx/Generic_F051KxU + +# Generic F070CB +GenF0.menu.pnum.GENERIC_F070CB=Generic F070CB +GenF0.menu.pnum.GENERIC_F070CB.upload.maximum_size=122880 +GenF0.menu.pnum.GENERIC_F070CB.upload.maximum_data_size=16384 +GenF0.menu.pnum.GENERIC_F070CB.build.board=GENERIC_F070CB +GenF0.menu.pnum.GENERIC_F070CB.build.product_line=STM32F070xB +GenF0.menu.pnum.GENERIC_F070CB.build.variant=STM32F0xx/Generic_F070CB + +# Generic F072C8 +GenF0.menu.pnum.GENERIC_F072C8=Generic F072C8 +GenF0.menu.pnum.GENERIC_F072C8.upload.maximum_size=65536 +GenF0.menu.pnum.GENERIC_F072C8.upload.maximum_data_size=16384 +GenF0.menu.pnum.GENERIC_F072C8.build.board=GENERIC_F072C8 +GenF0.menu.pnum.GENERIC_F072C8.build.product_line=STM32F072xB +GenF0.menu.pnum.GENERIC_F072C8.build.variant=STM32F0xx/Generic_F072Cx + +# Generic F072CB +GenF0.menu.pnum.GENERIC_F072CB=Generic F072CB +GenF0.menu.pnum.GENERIC_F072CB.upload.maximum_size=131072 +GenF0.menu.pnum.GENERIC_F072CB.upload.maximum_data_size=16384 +GenF0.menu.pnum.GENERIC_F072CB.build.board=GENERIC_F072CB +GenF0.menu.pnum.GENERIC_F072CB.build.product_line=STM32F072xB +GenF0.menu.pnum.GENERIC_F072CB.build.variant=STM32F0xx/Generic_F072Cx + +# Generic F072R8 +GenF0.menu.pnum.GENERIC_F072R8=Generic F072R8 +GenF0.menu.pnum.GENERIC_F072R8.upload.maximum_size=65536 +GenF0.menu.pnum.GENERIC_F072R8.upload.maximum_data_size=16384 +GenF0.menu.pnum.GENERIC_F072R8.build.board=GENERIC_F072R8 +GenF0.menu.pnum.GENERIC_F072R8.build.product_line=STM32F072xB +GenF0.menu.pnum.GENERIC_F072R8.build.variant=STM32F0xx/Generic_F072Rx + +# Generic F072RB +GenF0.menu.pnum.Generic_F072RB=Generic F072RB +GenF0.menu.pnum.Generic_F072RB.upload.maximum_size=131072 +GenF0.menu.pnum.Generic_F072RB.upload.maximum_data_size=16384 +GenF0.menu.pnum.Generic_F072RB.build.board=GENERIC_F072RB +GenF0.menu.pnum.Generic_F072RB.build.product_line=STM32F072xB +GenF0.menu.pnum.Generic_F072RB.build.variant=STM32F0xx/Generic_F072Rx + +# Generic F091RB +GenF0.menu.pnum.Generic_F091RB=Generic F091RB +GenF0.menu.pnum.Generic_F091RB.upload.maximum_size=131072 +GenF0.menu.pnum.Generic_F091RB.upload.maximum_data_size=32768 +GenF0.menu.pnum.Generic_F091RB.build.board=GENERIC_F091RB +GenF0.menu.pnum.Generic_F091RB.build.product_line=STM32F091xC +GenF0.menu.pnum.Generic_F091RB.build.variant=STM32F0xx/Generic_F091Rx + +# Generic F091RC +GenF0.menu.pnum.Generic_F091RC=Generic F091RC +GenF0.menu.pnum.Generic_F091RC.upload.maximum_size=262144 +GenF0.menu.pnum.Generic_F091RC.upload.maximum_data_size=32768 +GenF0.menu.pnum.Generic_F091RC.build.board=GENERIC_F091RC +GenF0.menu.pnum.Generic_F091RC.build.product_line=STM32F091xC +GenF0.menu.pnum.Generic_F091RC.build.variant=STM32F0xx/Generic_F091Rx # Upload menu GenF0.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD) @@ -2057,16 +2169,16 @@ ESC_board.build.core=arduino ESC_board.build.board=FCE_board ESC_board.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -# Wraith32_V1 board -ESC_board.menu.pnum.Wraith32_V1=Wraith V1 ESC -ESC_board.menu.pnum.Wraith32_V1.upload.maximum_size=32768 -ESC_board.menu.pnum.Wraith32_V1.upload.maximum_data_size=7936 -ESC_board.menu.pnum.Wraith32_V1.build.mcu=cortex-m0 -ESC_board.menu.pnum.Wraith32_V1.build.board=Wraith32_V1 -ESC_board.menu.pnum.Wraith32_V1.build.series=STM32F0xx -ESC_board.menu.pnum.Wraith32_V1.build.product_line=STM32F051x8 -ESC_board.menu.pnum.Wraith32_V1.build.variant=STM32F0xx/WRAITH32_F051K6 -ESC_board.menu.pnum.Wraith32_V1.build.cmsis_lib_gcc=arm_cortexM0l_math +# WRAITH32_V1 board +ESC_board.menu.pnum.WRAITH32_V1=Wraith V1 ESC +ESC_board.menu.pnum.WRAITH32_V1.upload.maximum_size=32768 +ESC_board.menu.pnum.WRAITH32_V1.upload.maximum_data_size=7936 +ESC_board.menu.pnum.WRAITH32_V1.build.mcu=cortex-m0 +ESC_board.menu.pnum.WRAITH32_V1.build.board=WRAITH32_V1 +ESC_board.menu.pnum.WRAITH32_V1.build.series=STM32F0xx +ESC_board.menu.pnum.WRAITH32_V1.build.product_line=STM32F051x8 +ESC_board.menu.pnum.WRAITH32_V1.build.variant=STM32F0xx/Generic_F051KxU +ESC_board.menu.pnum.WRAITH32_V1.build.cmsis_lib_gcc=arm_cortexM0l_math # Upload menu ESC_board.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD) @@ -2133,7 +2245,7 @@ LoRa.menu.pnum.ELEKTOR_F072C8.build.mcu=cortex-m0 LoRa.menu.pnum.ELEKTOR_F072C8.build.board=ELEKTOR_F072C8 LoRa.menu.pnum.ELEKTOR_F072C8.build.series=STM32F0xx LoRa.menu.pnum.ELEKTOR_F072C8.build.product_line=STM32F072xB -LoRa.menu.pnum.ELEKTOR_F072C8.build.variant=STM32F0xx/ELEKTOR_F072Cx +LoRa.menu.pnum.ELEKTOR_F072C8.build.variant=STM32F0xx/Generic_F072Cx LoRa.menu.pnum.ELEKTOR_F072C8.build.cmsis_lib_gcc=arm_cortexM0l_math LoRa.menu.pnum.ELEKTOR_F072C8.build.extra_flags=-D{build.product_line} {build.xSerial} @@ -2145,7 +2257,7 @@ LoRa.menu.pnum.ELEKTOR_F072CB.build.mcu=cortex-m0 LoRa.menu.pnum.ELEKTOR_F072CB.build.board=ELEKTOR_F072CB LoRa.menu.pnum.ELEKTOR_F072CB.build.series=STM32F0xx LoRa.menu.pnum.ELEKTOR_F072CB.build.product_line=STM32F072xB -LoRa.menu.pnum.ELEKTOR_F072CB.build.variant=STM32F0xx/ELEKTOR_F072Cx +LoRa.menu.pnum.ELEKTOR_F072CB.build.variant=STM32F0xx/Generic_F072Cx LoRa.menu.pnum.ELEKTOR_F072CB.build.cmsis_lib_gcc=arm_cortexM0l_math LoRa.menu.pnum.ELEKTOR_F072CB.build.extra_flags=-D{build.product_line} {build.xSerial} @@ -2256,7 +2368,7 @@ LoRa.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg 3dprinter.menu.pnum.EEXTR_F030_V1.build.board=EEXTR_F030_V1 3dprinter.menu.pnum.EEXTR_F030_V1.build.series=STM32F0xx 3dprinter.menu.pnum.EEXTR_F030_V1.build.product_line=STM32F030x8 -3dprinter.menu.pnum.EEXTR_F030_V1.build.variant=STM32F0xx/EEXTR_F030_V1 +3dprinter.menu.pnum.EEXTR_F030_V1.build.variant=STM32F0xx/Generic_F030C8 3dprinter.menu.pnum.EEXTR_F030_V1.build.cmsis_lib_gcc=arm_cortexM0l_math # MALYANM200_F103CB board @@ -2281,9 +2393,10 @@ LoRa.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg 3dprinter.menu.pnum.MALYANM200_F070CB.build.board=MALYANM200_F070CB 3dprinter.menu.pnum.MALYANM200_F070CB.build.series=STM32F0xx 3dprinter.menu.pnum.MALYANM200_F070CB.build.product_line=STM32F070xB -3dprinter.menu.pnum.MALYANM200_F070CB.build.variant=STM32F0xx/MALYANMx00_F070CB +3dprinter.menu.pnum.MALYANM200_F070CB.build.variant=STM32F0xx/Generic_F070CB 3dprinter.menu.pnum.MALYANM200_F070CB.build.cmsis_lib_gcc=arm_cortexM0l_math 3dprinter.menu.pnum.MALYANM200_F070CB.build.startup_file=-DCUSTOM_STARTUP_FILE +3dprinter.menu.pnum.MALYANM200_F070CB.build.ldscript=MALYANMx00_F070CB.ld 3dprinter.menu.pnum.MALYANM200_F070CB.build.flash_offset=0x2000 3dprinter.menu.pnum.MALYANM200_F070CB.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -DVECT_TAB_OFFSET={build.flash_offset} @@ -2295,9 +2408,10 @@ LoRa.menu.upload_method.dfuMethod.upload.tool=stm32CubeProg 3dprinter.menu.pnum.MALYANM300_F070CB.build.board=MALYANM300_F070CB 3dprinter.menu.pnum.MALYANM300_F070CB.build.series=STM32F0xx 3dprinter.menu.pnum.MALYANM300_F070CB.build.product_line=STM32F070xB -3dprinter.menu.pnum.MALYANM300_F070CB.build.variant=STM32F0xx/MALYANMx00_F070CB +3dprinter.menu.pnum.MALYANM300_F070CB.build.variant=STM32F0xx/Generic_F070CB 3dprinter.menu.pnum.MALYANM300_F070CB.build.cmsis_lib_gcc=arm_cortexM0l_math 3dprinter.menu.pnum.MALYANM300_F070CB.build.startup_file=-DCUSTOM_STARTUP_FILE +3dprinter.menu.pnum.MALYANM200_F070CB.build.ldscript=MALYANMx00_F070CB.ld 3dprinter.menu.pnum.MALYANM300_F070CB.build.flash_offset=0x2000 3dprinter.menu.pnum.MALYANM300_F070CB.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -DVECT_TAB_OFFSET={build.flash_offset} @@ -2445,7 +2559,7 @@ Garatronic.menu.pnum.PYBSTICK26_DUINO.build.mcu=cortex-m0 Garatronic.menu.pnum.PYBSTICK26_DUINO.build.board=PYBSTICK26_DUINO Garatronic.menu.pnum.PYBSTICK26_DUINO.build.series=STM32F0xx Garatronic.menu.pnum.PYBSTICK26_DUINO.build.product_line=STM32F072xB -Garatronic.menu.pnum.PYBSTICK26_DUINO.build.variant=STM32F0xx/PYBSTICK26_DUINO +Garatronic.menu.pnum.PYBSTICK26_DUINO.build.variant=STM32F0xx/Generic_F072Rx Garatronic.menu.pnum.PYBSTICK26_DUINO.build.cmsis_lib_gcc=arm_cortexM0l_math # PYBSTICK26(LITE) board with F401CE diff --git a/variants/STM32F0xx/DEMO_F030F4/PeripheralPins.c b/variants/STM32F0xx/DEMO_F030F4/PeripheralPins.c deleted file mode 100644 index ab90f78a7d..0000000000 --- a/variants/STM32F0xx/DEMO_F030F4/PeripheralPins.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F030F4Px.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - LED - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {NC, NP, 0} -}; -#endif - -//*** No DAC *** - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - //{PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - //{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - //{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - //{PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - //{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - //{PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // LED - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -//*** No CAN *** - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** diff --git a/variants/STM32F0xx/DEMO_F030F4/ldscript.ld b/variants/STM32F0xx/DEMO_F030F4/ldscript.ld deleted file mode 100644 index 567c1c9d86..0000000000 --- a/variants/STM32F0xx/DEMO_F030F4/ldscript.ld +++ /dev/null @@ -1,188 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F030F4Px Device with -** 16KByte FLASH, 4KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20001000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 4K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 16K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/variants/STM32F0xx/DISCO_F030R8/PeripheralPins.c b/variants/STM32F0xx/DISCO_F030R8/PeripheralPins.c deleted file mode 100644 index c3ad049728..0000000000 --- a/variants/STM32F0xx/DISCO_F030R8/PeripheralPins.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F030R8Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - USER_BTN - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 - {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 - {NC, NP, 0} -}; -#endif - -//*** No DAC *** - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PF_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PF_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 1, 0)}, // TIM3_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 2, 0)}, // TIM3_CH2 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - LED_BLUE (LD4) - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 4, 0)}, // TIM3_CH4 - LED_GREEN (LD3) - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // USER_BTN - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** No CAN *** - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** diff --git a/variants/STM32F0xx/DISCO_F030R8/ldscript.ld b/variants/STM32F0xx/DISCO_F030R8/ldscript.ld deleted file mode 100644 index 470632bb90..0000000000 --- a/variants/STM32F0xx/DISCO_F030R8/ldscript.ld +++ /dev/null @@ -1,186 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F030R8Tx Device with -** 64KByte FLASH, 8KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20002000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/variants/STM32F0xx/DISCO_F030R8/variant.cpp b/variants/STM32F0xx/DISCO_F030R8/variant.cpp deleted file mode 100644 index 4a985bdc6a..0000000000 --- a/variants/STM32F0xx/DISCO_F030R8/variant.cpp +++ /dev/null @@ -1,174 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Digital PinName array -const PinName digitalPin[] = { - //P1 connector Right side (bottom view) - PC_13, //D0 - PC_14, //D1 - PC_15, //D2 - PF_0, //D3 - PF_1, //D4 - PC_0, //D5 - PC_1, //D6 - PC_2, //D7 - PC_3, //D8 - PA_0, //D9 - USER_BTN - PA_1, //D10 - PA_2, //D11 - PA_3, //D12 - PF_4, //D13 - PF_5, //D14 - PA_4, //D15 - PA_5, //D16 - PA_6, //D17 - PA_7, //D18 - PC_4, //D19 - PC_5, //D20 - PB_0, //D21 - PB_1, //D22 - PB_2, //D23 - PB_10, //D24 - PB_11, //D25 - PB_12, //D26 - //P2 connector Left side (bottom view) - PB_9, //D27 - PB_8, //D28 - PB_7, //D29 - PB_6, //D30 - PB_5, //D31 - PB_4, //D32 - PB_3, //D33 - PD_2, //D34 - PC_12, //D35 - PC_11, //D36 - PC_10, //D37 - PA_15, //D38 - PA_14, //D39 - PF_7, //D40 - PF_6, //D41 - PA_13, //D42 - PA_12, //D43 - PA_11, //D44 - PA_10, //D45 - PA_9, //D46 - PA_8, //D47 - PC_9, //D48 - LED_GREEN (LD3) - PC_8, //D49 - LED_BLUE (LD4) - PC_7, //D50 - PC_6, //D51 - PB_15, //D52 - PB_14, //D53 - PB_13 //D54 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 5, //A0 = D5 - 6, //A1 = D6 - 7, //A2 = D7 - 8, //A3 = D8 - 9, //A4 = D9 - 10, //A5 = D10 - 11, //A6 = D11 - 12, //A7 = D12 - 15, //A8 = D15 - 16, //A9 = D16 - 17, //A10 = D17 - 18, //A11 = D18 - 19, //A12 = D19 - 20, //A13 = D20 - 21, //A14 = D21 - 22 //A15 = D22 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSI/2) - * SYSCLK(Hz) = 48000000 - * HCLK(Hz) = 48000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 1 - * HSI Frequency(Hz) = 8000000 - * PREDIV = 1 - * PLLMUL = 12 - * Flash Latency(WS) = 1 - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; - - /* Initializes the CPU, AHB and APB busses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = 16; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - Error_Handler(); - } - - /* Initializes the CPU, AHB and APB busses clocks */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK - | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { - Error_Handler(); - } -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F0xx/DISCO_F030R8/variant.h b/variants/STM32F0xx/DISCO_F030R8/variant.h deleted file mode 100644 index bb023aa3d1..0000000000 --- a/variants/STM32F0xx/DISCO_F030R8/variant.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -// P1 connector Right side (bottom view) -#define PC13 0 -#define PC14 1 -#define PC15 2 -#define PF0 3 -#define PF1 4 -#define PC0 A0 -#define PC1 A1 -#define PC2 A2 -#define PC3 A3 -#define PA0 A4 // USER_BTN -#define PA1 A5 -#define PA2 A6 -#define PA3 A7 -#define PF4 13 -#define PF5 14 -#define PA4 A8 -#define PA5 A9 -#define PA6 A10 -#define PA7 A11 -#define PC4 A12 -#define PC5 A13 -#define PB0 A14 -#define PB1 A15 -#define PB2 23 -#define PB10 24 -#define PB11 25 -#define PB12 26 -// P2 connector Left side (bottom view) -#define PB9 27 -#define PB8 28 -#define PB7 29 -#define PB6 30 -#define PB5 31 -#define PB4 32 -#define PB3 33 -#define PD2 34 -#define PC12 35 -#define PC11 36 -#define PC10 37 -#define PA15 38 -#define PA14 39 -#define PF7 40 -#define PF6 41 -#define PA13 42 -#define PA12 43 -#define PA11 44 -#define PA10 45 -#define PA9 46 -#define PA8 47 -#define PC9 48 // LED_GREEN (LD3) -#define PC8 49 // LED_BLUE (LD4) -#define PC7 50 -#define PC6 51 -#define PB15 52 -#define PB14 53 -#define PB13 54 - -// This must be a literal -#define NUM_DIGITAL_PINS 71 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 16 - -//On-board LED pin number -#define LED_BUILTIN PC9 // LD3 -#define LED_GREEN LED_BUILTIN -#define LED_BLUE PC8 // LD4 - -//On-board user button -#define USER_BTN PA0 - -// SPI definitions -// SPI1 is used -#define PIN_SPI_SS PA4 -#define PIN_SPI_SS1 PC4 -#define PIN_SPI_SS2 PB12 -#define PIN_SPI_SS3 PC6 -#define PIN_SPI_MOSI PA7 -#define PIN_SPI_MISO PA6 -#define PIN_SPI_SCK PA5 - -// I2C Definitions -// I2C1 is used -#define PIN_WIRE_SDA PB9 -#define PIN_WIRE_SCL PB8 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM14 - -// UART Definitions -#define SERIAL_UART_INSTANCE 1 // USART 1 - -// Mandatory for Firmata -#define PIN_SERIAL_RX PA10 -#define PIN_SERIAL_TX PA9 - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F0xx/DISCO_F072RB/PeripheralPins.c b/variants/STM32F0xx/DISCO_F072RB/PeripheralPins.c deleted file mode 100644 index 3ea01aa261..0000000000 --- a/variants/STM32F0xx/DISCO_F072RB/PeripheralPins.c +++ /dev/null @@ -1,312 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F072R(8-B)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 -#ifdef TSC_REMOVED - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 -#endif - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 -#ifdef TSC_REMOVED - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 -#endif - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 - {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - // {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N -#ifdef TSC_REMOVED - // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 -#endif - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 -#ifdef TSC_REMOVED - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 -#endif - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 -#ifdef USB_REMOVED - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 -#endif - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 -#ifdef TSC_REMOVED - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 -#endif - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 1, 0)}, // TIM3_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 2, 0)}, // TIM3_CH2 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 3, 0)}, // TIM3_CH3 - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 4, 0)}, // TIM3_CH4 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, -#ifdef TSC_REMOVED - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, -#endif - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - // {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_10, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, -#ifdef TSC_REMOVED - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, -#endif - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - // {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_11, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, -#ifdef USB_REMOVED - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, -#endif - {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, -#ifdef TSC_REMOVED - {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, -#endif - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, -#ifdef TSC_REMOVED - {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, -#endif -#ifdef TSC_REMOVED - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, -#endif - {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { -#ifdef TSC_REMOVED - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, -#endif - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { -#ifdef TSC_REMOVED - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, -#endif - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { -#ifdef USB_REMOVED - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, -#endif - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { -#ifdef USB_REMOVED - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, -#endif - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP - // {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** diff --git a/variants/STM32F0xx/DISCO_F072RB/ldscript.ld b/variants/STM32F0xx/DISCO_F072RB/ldscript.ld deleted file mode 100644 index 44015746d5..0000000000 --- a/variants/STM32F0xx/DISCO_F072RB/ldscript.ld +++ /dev/null @@ -1,188 +0,0 @@ -/* -***************************************************************************** -** - -** File : ldscript.ld -** -** Abstract : Linker script for STM32F072RB Device with -** 128KByte FLASH, 16KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(4); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/variants/STM32F0xx/DISCO_F072RB/variant.cpp b/variants/STM32F0xx/DISCO_F072RB/variant.cpp deleted file mode 100644 index 08ae1b9621..0000000000 --- a/variants/STM32F0xx/DISCO_F072RB/variant.cpp +++ /dev/null @@ -1,187 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Pin number -const PinName digitalPin[] = { - //P2 connector Right side (top view) - PB_9, //D0 - PB_8, //D1 - PB_7, //D2 - PB_6, //D3 - PB_5, //D4 - PB_4, //D5 - PB_3, //D6 - PD_2, //D7 - PC_12, //D8 - PC_11, //D9 - PC_10, //D10 - PA_15, //D11 - PA_14, //D12 - PA_13, //D13 -#ifdef USB_REMOVED - PA_12, //D14 - PA_11, //D15 -#else - NC, - NC, -#endif - PA_10, //D16 - PA_9, //D17 - PA_8, //D18 - PC_9, //D19 - PC_8, //D20 - PC_7, //D21 - PC_6, //D22 - PB_15, //D23 - PB_14, //D24 - PB_13, //D25 - //P1 connector Left side (top view) - PC_13, //D26 - PC_14, //D27 - PC_15, //D28 - PF_0, //D29 - PF_1, //D30 - PC_0, //D31 - PC_1, //D32 - PC_2, //D33 - PC_3, //D34 - PA_0, //D35 - PA_1, //D36 -#ifdef TSC_REMOVED - PA_2, //D37 - PA_3, //D38 -#else - NC, - NC, -#endif - PA_4, //D39 - PA_5, //D40 -#ifdef TSC_REMOVED - PA_6, //D41 - PA_7, //D42 -#else - NC, - NC, -#endif - PC_4, //D43 - PC_5, //D44 -#ifdef TSC_REMOVED - PB_0, //D45 - PB_1, //D46 -#else - NC, - NC, -#endif - PB_2, //D47 - PB_10, //D48 - PB_11, //D49 - PB_12, //D50 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 31, // A0 - 32, // A1 - 33, // A2 - 34, // A3 - 35, // A4 - 36, // A5 - 37, // A6 - 38, // A7 - 39, // A8 - 40, // A9 - 41, // A10 - 42, // A11 - 43, // A12 - 44, // A13 - 45, // A14 - 46 // A15 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInit; - - /* Initializes the CPU, AHB and APB busses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - Error_Handler(); - } - /* Initializes the CPU, AHB and APB busses clocks */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK - | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { - Error_Handler(); - } - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; - - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { - Error_Handler(); - } -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F0xx/DISCO_F072RB/variant.h b/variants/STM32F0xx/DISCO_F072RB/variant.h deleted file mode 100644 index 0af66f957b..0000000000 --- a/variants/STM32F0xx/DISCO_F072RB/variant.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -// USB USER CN2 -// By default, SB20,23 (USB-USER) are OFF. -// So PA11,12 are not available. -// If ON and R12,13 removed, -// #define USB_REMOVED -// to get PA11,12 available. - -// Linear touch sensor -// By default, SB27,28,29,30,31,32 (touch sensor) are OFF. -// So PA2,3,6,7 and PB0,1 are not available. -// If ON and R38,39,40 and C26,27,28 are removed, -// #define TSC_REMOVED -// to get PA2,3,6,7 and PB0,1 available. - -// P2 connector Right side (top view) -#define PB9 0 -#define PB8 1 -#define PB7 2 -#define PB6 3 -#define PB5 4 -#define PB4 5 -#define PB3 6 -#define PD2 7 -#define PC12 8 -#define PC11 9 -#define PC10 10 -#define PA15 11 -#define PA14 12 -#define PA13 13 -#define PA12 14 // SB20 (default OFF): USB_DP -#define PA11 15 // SB23 (default OFF): USB_DM -#define PA10 16 -#define PA9 17 -#define PA8 18 -#define PC9 19 // LED_GREEN (LD4) -#define PC8 20 // LED_ORANGE (LD3) -#define PC7 21 // LED_BLUE (LD6) -#define PC6 22 // LED_RED (LD5) -#define PB15 23 // SPI2_MOSI (L3GD20) -#define PB14 24 // SPI2_MISO (L3GD20) -#define PB13 25 // SPI2_SCK (L3GD20) -// P1 connector Left side (top view) -#define PC13 26 -#define PC14 27 -#define PC15 28 -#define PF0 29 -#define PF1 30 -#define PC0 A0 // NCS_MEMS_SPI (L3GD20) -#define PC1 A1 // MEMS INT1 (L3GD20) -#define PC2 A2 // MEMS INT2 (L3GD20) -#define PC3 A3 -#define PA0 A4 // USER_BTN -#define PA1 A5 -#define PA2 A6 // SB27 (default OFF): TS_G1_IO3 -#define PA3 A7 // SB28 (default OFF): TS_G1_IO4 -#define PA4 A8 -#define PA5 A9 -#define PA6 A10 // SB29 (default OFF): TS_G2_IO3 -#define PA7 A11 // SB30 (default OFF): TS_G2_IO4 -#define PC4 A12 -#define PC5 A13 // Ext Reset -#define PB0 A14 // SB31 (default OFF): TS_G3_IO2 -#define PB1 A15 // SB32 (default OFF): TS_G3_IO3 -#define PB2 47 -#define PB10 48 // I2C2 SCL: Extension / RF EEprom Connector -#define PB11 49 // I2C2 SDA: Extension / RF EEprom Connector -#define PB12 50 - -// This must be a literal -#define NUM_DIGITAL_PINS 51 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 16 - -//On-board LED pin number -#define LED_BUILTIN PC9 -#define LED_GREEN LED_BUILTIN -#define LED_ORANGE PC8 -#define LED_BLUE PC7 -#define LED_RED PC6 - -//On-board user button -#define USER_BTN PA0 - -// SPI definitions -// SPI1 is used -#define PIN_SPI_SS PA4 -#define PIN_SPI_SS1 PC4 -#define PIN_SPI_SS2 PB12 -#define PIN_SPI_SS3 PB6 -#define PIN_SPI_MOSI PB5 -#define PIN_SPI_MISO PB4 -#define PIN_SPI_SCK PB3 - -// I2C Definitions -// I2C1 is used -#define PIN_WIRE_SDA PB9 -#define PIN_WIRE_SCL PB8 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM7 - -// UART Definitions -#define SERIAL_UART_INSTANCE 1 // USART 1 - -// Mandatory for Firmata -#define PIN_SERIAL_RX PA10 -#define PIN_SERIAL_TX PA9 - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F0xx/EEXTR_F030_V1/PeripheralPins.c b/variants/STM32F0xx/EEXTR_F030_V1/PeripheralPins.c deleted file mode 100644 index 4600812d13..0000000000 --- a/variants/STM32F0xx/EEXTR_F030_V1/PeripheralPins.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F030C8Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - TC1_CS - // {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - TC2_CS - // {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - SPI - // {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - SPI - // {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - SPI - // {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - PWM0 - // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - PWM0 - // {NC, NP, 0} -}; -#endif - -//*** No DAC *** - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - // {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, // E0_CTL - {PF_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - // {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, // E1_FAN - {PF_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - TC1_CS - // {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - TC2_CS - // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - SPI - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - SPI - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - SPI - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - SPI - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - SPI - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - SPI - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - UART1 - // {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - UART1 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - I2C - // {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - I2C - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - // {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // ADC - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // I2C - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - // {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // TC2_CS - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // I2C - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - // {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // ADC - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - // {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // ADC - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - // {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // TC2_CS - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - // {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // E1_CTL - {NC, NP, 0} -}; -#endif - -//*** No CAN *** - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** diff --git a/variants/STM32F0xx/EEXTR_F030_V1/PinNamesVar.h b/variants/STM32F0xx/EEXTR_F030_V1/PinNamesVar.h deleted file mode 100644 index 9ef092a0e5..0000000000 --- a/variants/STM32F0xx/EEXTR_F030_V1/PinNamesVar.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = NC, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = NC, -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = NC, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = NC, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = NC, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = NC, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = NC, -#endif diff --git a/variants/STM32F0xx/EEXTR_F030_V1/ldscript.ld b/variants/STM32F0xx/EEXTR_F030_V1/ldscript.ld deleted file mode 100644 index 79fc5de456..0000000000 --- a/variants/STM32F0xx/EEXTR_F030_V1/ldscript.ld +++ /dev/null @@ -1,186 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F030C8Tx Device with -** 64KByte FLASH, 8KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20002000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/variants/STM32F0xx/ELEKTOR_F072Cx/PeripheralPins.c b/variants/STM32F0xx/ELEKTOR_F072Cx/PeripheralPins.c deleted file mode 100644 index 9cab18e164..0000000000 --- a/variants/STM32F0xx/ELEKTOR_F072Cx/PeripheralPins.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - * Automatically generated from STM32F072C(8-B)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - // {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP - // {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** - -//*** No SD *** diff --git a/variants/STM32F0xx/ELEKTOR_F072Cx/variant.cpp b/variants/STM32F0xx/ELEKTOR_F072Cx/variant.cpp deleted file mode 100644 index c31b61bf38..0000000000 --- a/variants/STM32F0xx/ELEKTOR_F072Cx/variant.cpp +++ /dev/null @@ -1,137 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2017, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Pin number -// This array allows to wrap Arduino pin number(Dx or x) -// to STM32 PinName (PX_n) -const PinName digitalPin[] = { - PA_8, //D0 - PA_9, //D1 - PA_10, //D2 - PA_11, //D3 - PA_12, //D4 - PA_13, //D5 - PA_14, //D6 - PA_15, //D7 - PB_2, //D8 - PB_3, //D9 - PB_4, //D10 - PB_5, //D11 - PB_6, //D12 - PB_7, //D13 - PB_8, //D14 - PB_9, //D15 - PB_10, //D16 - PB_11, //D17 - PB_12, //D18 - PB_13, //D19 - PB_14, //D20 - PB_15, //D21 - PC_13, //D24 - PC_14, //D25 - PC_15, //D26 - //Analog Pins - PA_0, //D27, A0 - PA_1, //D28, A1 - PA_2, //D29, A2 - PA_3, //D30, A3 - PA_4, //D31, A4 - PA_5, //D32, A5 - PA_6, //D33, A6 - PA_7, //D34, A7 - PB_0, //D35, A8 - PB_1, //D36, A9 - PF_0, //D37 - PF_1 //D38 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 25, // A0 - 26, // A1 - 27, // A2 - 28, // A3 - 29, // A4 - 30, // A5 - 31, // A6 - 32, // A7 - 33, // A8 - 34 // A9 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; - - /* Initializes the CPU, AHB and APB busses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - Error_Handler(); - } - /* Initializes the CPU, AHB and APB busses clocks */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK - | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) { - Error_Handler(); - } -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F0xx/Generic_F030C8/PeripheralPins.c b/variants/STM32F0xx/Generic_F030C8/PeripheralPins.c new file mode 100644 index 0000000000..f10d75fc90 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030C8/PeripheralPins.c @@ -0,0 +1,197 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F030C8Tx.xml + * CubeMX DB release 6.0.10 + */ +#if defined(ARDUINO_GENERIC_F030C8) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PF_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PF_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** +#endif /* ARDUINO_GENERIC_F030C8 */ diff --git a/variants/STM32F0xx/Generic_F030C8/PeripheralPins_EEXTR_F030_V1.c b/variants/STM32F0xx/Generic_F030C8/PeripheralPins_EEXTR_F030_V1.c new file mode 100644 index 0000000000..4385c2ae85 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030C8/PeripheralPins_EEXTR_F030_V1.c @@ -0,0 +1,197 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F030C8Tx.xml + * CubeMX DB release 6.0.10 + */ +#if defined(ARDUINO_EEXTR_F030_V1) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - TC1_CS + // {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - TC2_CS + // {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - SPI + // {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - SPI + // {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - SPI + // {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - PWM0 + // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - PWM0 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + // {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, // E0_CTL + {PF_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + // {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, // E1_FAN + {PF_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - TC1_CS + // {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - TC2_CS + // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - SPI + // {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - SPI + // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - SPI + // {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - SPI + // {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - SPI + // {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - SPI + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - UART1 + // {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - UART1 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + // {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - I2C + // {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - I2C + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + // {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // ADC + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // I2C + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + // {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // TC2_CS + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // I2C + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + // {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // ADC + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + // {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // ADC + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + // {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // TC2_CS + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + // {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, // E1_CTL + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** +#endif /* ARDUINO_EEXTR_F030_V1 */ diff --git a/variants/STM32F0xx/NUCLEO_F031K6/PinNamesVar.h b/variants/STM32F0xx/Generic_F030C8/PinNamesVar.h similarity index 56% rename from variants/STM32F0xx/NUCLEO_F031K6/PinNamesVar.h rename to variants/STM32F0xx/Generic_F030C8/PinNamesVar.h index 87d21ee39c..390e0b1ce7 100644 --- a/variants/STM32F0xx/NUCLEO_F031K6/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F030C8/PinNamesVar.h @@ -1,3 +1,15 @@ +/* Alternate pin name */ +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, +PB_14_ALT0 = PB_14 | ALT0, +PB_15_ALT0 = PB_15 | ALT0, +PB_15_ALT1 = PB_15 | ALT1, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -23,3 +35,5 @@ #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = NC, #endif + +/* No USB */ diff --git a/variants/STM32F0xx/WRAITH32_F051K6/ldscript.ld b/variants/STM32F0xx/Generic_F030C8/ldscript.ld similarity index 53% rename from variants/STM32F0xx/WRAITH32_F051K6/ldscript.ld rename to variants/STM32F0xx/Generic_F030C8/ldscript.ld index 988751bc51..8208699654 100644 --- a/variants/STM32F0xx/WRAITH32_F051K6/ldscript.ld +++ b/variants/STM32F0xx/Generic_F030C8/ldscript.ld @@ -1,47 +1,49 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : Auto-generated by STM32CubeMx, modified by G. Small -** -** Abstract : Linker script for STM32F051K6Tx series -** 32Kbytes FLASH and 256 bytes SRAM, 7936 bytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed “as is,” without any warranty -** of any kind. -** -***************************************************************************** -*/ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F030C8Tx Device from STM32F0 series + * 64Kbytes FLASH + * 8Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ /* Entry Point */ ENTRY(Reset_Handler) /* Highest address of the user mode stack */ -_estack = 0x20002000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ -/* Specify the memory areas */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ MEMORY { - SRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256 - RAM (xrw) : ORIGIN = 0x20000100, LENGTH = 7936 - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 32K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET } -/* Define output sections */ +/* Sections */ SECTIONS { - /* The startup code goes first into FLASH */ + /* The startup code into "FLASH" Rom type memory */ .isr_vector : { . = ALIGN(4); @@ -49,7 +51,7 @@ SECTIONS . = ALIGN(4); } >FLASH - /* The program code and other data goes into FLASH */ + /* The program code and other data into "FLASH" Rom type memory */ .text : { . = ALIGN(4); @@ -66,7 +68,7 @@ SECTIONS _etext = .; /* define a global symbols at end of code */ } >FLASH - /* Constant data goes into FLASH */ + /* Constant data into "FLASH" Rom type memory */ .rodata : { . = ALIGN(4); @@ -75,39 +77,54 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + .ARM : { + . = ALIGN(4); __exidx_start = .; *(.ARM.exidx*) __exidx_end = .; + . = ALIGN(4); } >FLASH .preinit_array : { + . = ALIGN(4); PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array*)) PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); } >FLASH + .init_array : { + . = ALIGN(4); PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT(.init_array.*))) KEEP (*(.init_array*)) PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); } >FLASH + .fini_array : { + . = ALIGN(4); PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT(.fini_array.*))) KEEP (*(.fini_array*)) PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); } >FLASH - /* used by the startup to initialize data */ + /* Used by the startup to initialize data */ _sidata = LOADADDR(.data); - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + /* Initialized data sections into "RAM" Ram type memory */ + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -116,14 +133,14 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH - - /* Uninitialized data section */ + /* Uninitialized data section into "RAM" Ram type memory */ . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) @@ -135,7 +152,7 @@ SECTIONS __bss_end__ = _ebss; } >RAM - /* User_heap_stack section, used to check that there is enough RAM left */ + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ ._user_heap_stack : { . = ALIGN(8); @@ -146,9 +163,7 @@ SECTIONS . = ALIGN(8); } >RAM - - - /* Remove information from the standard libraries */ + /* Remove information from the compiler libraries */ /DISCARD/ : { libc.a ( * ) @@ -157,8 +172,4 @@ SECTIONS } .ARM.attributes 0 : { *(.ARM.attributes) } - .RAMVectorTable : { *(.RAMVectorTable) } >SRAM AT> FLASH - } - - diff --git a/variants/STM32F0xx/Generic_F030C8/variant.cpp b/variants/STM32F0xx/Generic_F030C8/variant.cpp new file mode 100644 index 0000000000..dc4123c0f6 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030C8/variant.cpp @@ -0,0 +1,173 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F030C8) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PC_13, + PC_14, + PC_15, + PF_0, + PF_1, + PF_6, + PF_7 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17 // A9, PB1 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * or + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F030C8/variant.h b/variants/STM32F0xx/Generic_F030C8/variant.h new file mode 100644 index 0000000000..672ba68da4 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030C8/variant.h @@ -0,0 +1,174 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F030C8) +#include "variant_EEXTR_F030_V1.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC13 32 +#define PC14 33 +#define PC15 34 +#define PF0 35 +#define PF1 36 +#define PF6 37 +#define PF7 38 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) + +#define NUM_DIGITAL_PINS 39 +#define NUM_ALTERNATE_PINS 10 +#define NUM_ANALOG_INPUTS 10 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PC13 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC14 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB0 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB1 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM14 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 2 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/EEXTR_F030_V1/variant.cpp b/variants/STM32F0xx/Generic_F030C8/variant_EEXTR_F030_V1.cpp similarity index 55% rename from variants/STM32F0xx/EEXTR_F030_V1/variant.cpp rename to variants/STM32F0xx/Generic_F030C8/variant_EEXTR_F030_V1.cpp index 8b64d416c1..dc88dd54cf 100644 --- a/variants/STM32F0xx/EEXTR_F030_V1/variant.cpp +++ b/variants/STM32F0xx/Generic_F030C8/variant_EEXTR_F030_V1.cpp @@ -1,32 +1,16 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_EEXTR_F030_V1) #include "pins_arduino.h" @@ -36,45 +20,45 @@ extern "C" { // Pin number const PinName digitalPin[] = { - PC_13, // D0 - PC_14, // D1 - PC_15, // D2 - PF_0, // D3 - PF_1, // D4 - PA_0, // D5 - PA_1, // D6 - PA_2, // D7 - PA_3, // D8 - PA_4, // D9 - PA_5, // D10 - PA_6, // D11 - PA_7, // D12 - PB_0, // D13 - PB_1, // D14 - PB_2, // D15 - PB_10, // D16 - PB_11, // D17 - PB_12, // D18 - PB_13, // D19 - PB_14, // D20 - PB_15, // D21 - PA_8, // D22 - PA_9, // D23 - PA_10, // D24 - PA_11, // D25 - PA_12, // D26 - PA_13, // D27 - PF_6, // D28 - PF_7, // D29 - PA_14, // D30 - PA_15, // D31 - PB_3, // D32 - PB_4, // D33 - PB_5, // D34 - PB_6, // D35 - PB_7, // D36 - PB_8, // D37 - PB_9, // D38 + PC_13, + PC_14, + PC_15, + PF_0, + PF_1, + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PB_0, + PB_1, + PB_2, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PF_6, + PF_7, + PA_14, + PA_15, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9 }; // Analog (Ax) pin number array @@ -148,3 +132,4 @@ WEAK void SystemClock_Config(void) #ifdef __cplusplus } #endif +#endif /* ARDUINO_EEXTR_F030_V1 */ diff --git a/variants/STM32F0xx/EEXTR_F030_V1/variant.h b/variants/STM32F0xx/Generic_F030C8/variant_EEXTR_F030_V1.h similarity index 53% rename from variants/STM32F0xx/EEXTR_F030_V1/variant.h rename to variants/STM32F0xx/Generic_F030C8/variant_EEXTR_F030_V1.h index b89b55db9c..75f67bcc31 100644 --- a/variants/STM32F0xx/EEXTR_F030_V1/variant.h +++ b/variants/STM32F0xx/Generic_F030C8/variant_EEXTR_F030_V1.h @@ -1,32 +1,16 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_EEXTR_F030_V1) #ifndef _VARIANT_ARDUINO_STM32_ #define _VARIANT_ARDUINO_STM32_ @@ -40,49 +24,60 @@ extern "C" { *----------------------------------------------------------------------------*/ // P1 connector Right side (bottom view) -#define PC13 0 -#define PC14 1 -#define PC15 2 -#define PF0 3 -#define PF1 4 -#define PA0 A0 -#define PA1 A1 -#define PA2 A2 -#define PA3 8 -#define PA4 9 -#define PA5 10 -#define PA6 11 -#define PA7 12 -#define PB0 13 -#define PB1 14 -#define PB2 15 -#define PB10 16 -#define PB11 17 -#define PB12 18 -#define PB13 19 -#define PB14 20 -#define PB15 21 -#define PA8 22 -#define PA9 23 -#define PA10 24 -#define PA11 25 -#define PA12 26 -#define PA13 27 -#define PF6 28 -#define PF7 29 -#define PA14 30 -#define PA15 31 -#define PB3 32 -#define PB4 33 -#define PB5 34 -#define PB6 35 -#define PB7 36 -#define PB8 37 -#define PB9 38 +#define PC13 0 +#define PC14 1 +#define PC15 2 +#define PF0 3 +#define PF1 4 +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 8 +#define PA4 9 +#define PA5 10 +#define PA6 11 +#define PA7 12 +#define PB0 13 +#define PB1 14 +#define PB2 15 +#define PB10 16 +#define PB11 17 +#define PB12 18 +#define PB13 19 +#define PB14 20 +#define PB15 21 +#define PA8 22 +#define PA9 23 +#define PA10 24 +#define PA11 25 +#define PA12 26 +#define PA13 27 +#define PF6 28 +#define PF7 29 +#define PA14 30 +#define PA15 31 +#define PB3 32 +#define PB4 33 +#define PB5 34 +#define PB6 35 +#define PB7 36 +#define PB8 37 +#define PB9 38 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) -// This must be a literal #define NUM_DIGITAL_PINS 39 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS +#define NUM_ALTERNATE_PINS 10 #define NUM_ANALOG_INPUTS 3 // SPI definitions @@ -139,3 +134,4 @@ extern "C" { #endif #endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_EEXTR_F030_V1 */ diff --git a/variants/STM32F0xx/Generic_F030F4/PeripheralPins.c b/variants/STM32F0xx/Generic_F030F4/PeripheralPins.c new file mode 100644 index 0000000000..d14e87f6b6 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030F4/PeripheralPins.c @@ -0,0 +1,157 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F030F4Px.xml + * CubeMX DB release 6.0.10 + */ +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** diff --git a/variants/STM32F0xx/DEMO_F030F4/PinNamesVar.h b/variants/STM32F0xx/Generic_F030F4/PinNamesVar.h similarity index 67% rename from variants/STM32F0xx/DEMO_F030F4/PinNamesVar.h rename to variants/STM32F0xx/Generic_F030F4/PinNamesVar.h index 32d3641110..af3dc1eeb6 100644 --- a/variants/STM32F0xx/DEMO_F030F4/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F030F4/PinNamesVar.h @@ -1,3 +1,11 @@ +/* Alternate pin name */ +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -23,3 +31,5 @@ #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = NC, #endif + +/* No USB */ diff --git a/variants/STM32F0xx/ELEKTOR_F072Cx/ldscript.ld b/variants/STM32F0xx/Generic_F030F4/ldscript.ld similarity index 51% rename from variants/STM32F0xx/ELEKTOR_F072Cx/ldscript.ld rename to variants/STM32F0xx/Generic_F030F4/ldscript.ld index 0831439511..203e89374b 100644 --- a/variants/STM32F0xx/ELEKTOR_F072Cx/ldscript.ld +++ b/variants/STM32F0xx/Generic_F030F4/ldscript.ld @@ -1,68 +1,43 @@ -/* -****************************************************************************** -** -** File : LinkerScript.ld -** -** Author : Auto-generated by STM32CubeIDE -** -** Abstract : Linker script for STM32F072C8Tx Device from STM32F0 series -** 64Kbytes FLASH -** 16Kbytes RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** Distribution: The file is distributed as is without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2019 STMicroelectronics

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of STMicroelectronics nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F030F4Px Device from STM32F0 series + * 16Kbytes FLASH + * 4Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ /* Entry Point */ ENTRY(Reset_Handler) /* Highest address of the user mode stack */ -_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of "RAM" Ram type memory */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ /* Memories definition */ MEMORY { - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE - FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET } /* Sections */ @@ -102,12 +77,12 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); } >FLASH - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -124,7 +99,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >FLASH - + .init_array : { . = ALIGN(4); @@ -134,7 +109,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >FLASH - + .fini_array : { . = ALIGN(4); @@ -149,7 +124,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -158,14 +133,14 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> FLASH - + /* Uninitialized data section into "RAM" Ram type memory */ . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/variants/STM32F0xx/Generic_F030F4/variant.cpp b/variants/STM32F0xx/Generic_F030F4/variant.cpp new file mode 100644 index 0000000000..7f58f7fcb2 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030F4/variant.cpp @@ -0,0 +1,147 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F030F4) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_9, + PA_10, + PA_13, + PA_14, + PB_1, + PF_0, + PF_1 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 12 // A8, PB1 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * and + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F030F4/variant.h b/variants/STM32F0xx/Generic_F030F4/variant.h new file mode 100644 index 0000000000..eda5c9084f --- /dev/null +++ b/variants/STM32F0xx/Generic_F030F4/variant.h @@ -0,0 +1,134 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F030F4) +#include "variant_DEMO_F030F4.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA9 8 +#define PA10 9 +#define PA13 10 +#define PA14 11 +#define PB1 A8 +#define PF0 13 +#define PF1 14 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) + +#define NUM_DIGITAL_PINS 15 +#define NUM_ALTERNATE_PINS 6 +#define NUM_ANALOG_INPUTS 9 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PB1 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PA0 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PB1 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PA1 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PA0 +#endif +#define PIN_SPI_MOSI PA7 +#define PIN_SPI_MISO PA6 +#define PIN_SPI_SCK PA5 + +// I2C definitions +#define PIN_WIRE_SDA PA10 +#define PIN_WIRE_SCL PA9 + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#define SERIAL_UART_INSTANCE 1 + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/DEMO_F030F4/variant.cpp b/variants/STM32F0xx/Generic_F030F4/variant_DEMO_F030F4.cpp similarity index 56% rename from variants/STM32F0xx/DEMO_F030F4/variant.cpp rename to variants/STM32F0xx/Generic_F030F4/variant_DEMO_F030F4.cpp index 211003e092..ce0ca63ef2 100644 --- a/variants/STM32F0xx/DEMO_F030F4/variant.cpp +++ b/variants/STM32F0xx/Generic_F030F4/variant_DEMO_F030F4.cpp @@ -1,33 +1,16 @@ /* ******************************************************************************* - * Copyright (c) 2017, STMicroelectronics + * Copyright (c) 2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ - +#if defined(ARDUINO_DEMO_F030F4) || defined(ARDUINO_DEMO_F030F4_16M) || defined(ARDUINO_DEMO_F030F4_HSI) #include "pins_arduino.h" #ifdef __cplusplus @@ -89,10 +72,13 @@ extern "C" { */ WEAK void SystemClock_Config(void) { - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; - /* Initializes the CPU, AHB and APB busses clocks */ + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; #ifdef ARDUINO_DEMO_F030F4_HSI /* Internal HSI, 48MHz system clock */ @@ -103,10 +89,8 @@ WEAK void SystemClock_Config(void) RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; #else - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI14 | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSI14State = RCC_HSI14_ON; - RCC_OscInitStruct.HSI14CalibrationValue = 16; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; #ifdef ARDUINO_DEMO_F030F4_16M @@ -116,7 +100,7 @@ WEAK void SystemClock_Config(void) #endif #endif if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - _Error_Handler(__FILE__, __LINE__); + Error_Handler(); } /* Initializes the CPU, AHB and APB busses clocks */ @@ -127,10 +111,11 @@ WEAK void SystemClock_Config(void) RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { - _Error_Handler(__FILE__, __LINE__); + Error_Handler(); } } #ifdef __cplusplus } #endif +#endif /* ARDUINO_* */ diff --git a/variants/STM32F0xx/DEMO_F030F4/variant.h b/variants/STM32F0xx/Generic_F030F4/variant_DEMO_F030F4.h similarity index 51% rename from variants/STM32F0xx/DEMO_F030F4/variant.h rename to variants/STM32F0xx/Generic_F030F4/variant_DEMO_F030F4.h index d80c489e31..40d5f87aa3 100644 --- a/variants/STM32F0xx/DEMO_F030F4/variant.h +++ b/variants/STM32F0xx/Generic_F030F4/variant_DEMO_F030F4.h @@ -1,32 +1,16 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_DEMO_F030F4) || defined(ARDUINO_DEMO_F030F4_16M) || defined(ARDUINO_DEMO_F030F4_HSI) #ifndef _VARIANT_ARDUINO_STM32_ #define _VARIANT_ARDUINO_STM32_ @@ -35,59 +19,84 @@ extern "C" { #endif // __cplusplus /*---------------------------------------------------------------------------- - * Pins + * STM32 pins number *----------------------------------------------------------------------------*/ - // USB connector on the top, MCU side // Left Side -#define PA0 A0 //D0/A0 -#define PA1 A1 //D1/A1 -#define PA2 A2 //D2/A2 - TX -#define PA3 A3 //D3/A3 - RX -#define PA4 A4 //D4/A4 - LED +#define PA0 A0 //D0/A0 +#define PA1 A1 //D1/A1 +#define PA2 A2 //D2/A2 - TX +#define PA3 A3 //D3/A3 - RX +#define PA4 A4 //D4/A4 - LED // Right side -#define PA5 A5 //D5/A5 - SCK -#define PA6 A6 //D6/A6 - MISO -#define PA7 A7 //D7/A7 - MOSI -#define PB1 A8 //D8/A8 - SS -#define PA9 9 //D9 - SCL (TX UART header) -#define PA10 10 //D10 - SDA (RX UART header) -#define PA13 11 //D11 - SWDIO -#define PA14 12 //D12 - SWCLK +#define PA5 A5 //D5/A5 - SCK +#define PA6 A6 //D6/A6 - MISO +#define PA7 A7 //D7/A7 - MOSI +#define PB1 A8 //D8/A8 - SS +#define PA9 9 //D9 - SCL (TX UART header) +#define PA10 10 //D10 - SDA (RX UART header) +#define PA13 11 //D11 - SWDIO +#define PA14 12 //D12 - SWCLK // Boards without a crystal can use these pins as well: -#define PF0 13 -#define PF1 14 +#define PF0 13 +#define PF1 14 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) -// This must be a literal with the same value as PEND #define NUM_DIGITAL_PINS 15 -// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS +#define NUM_ALTERNATE_PINS 6 #define NUM_ANALOG_INPUTS 9 // On-board LED pin number +#ifndef LED_BUILTIN #define LED_BUILTIN PA4 +#endif +#ifndef LED_GREEN #define LED_GREEN LED_BUILTIN +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN NC +#endif // SPI Definitions +#ifndef PIN_SPI_SS #define PIN_SPI_SS PB1 +#endif #define PIN_SPI_MOSI PA7 #define PIN_SPI_MISO PA6 #define PIN_SPI_SCK PA5 // I2C Definitions -#define PIN_WIRE_SDA PA10 // Default for Arduino connector compatibility -#define PIN_WIRE_SCL PA9 // Default for Arduino connector compatibility +#define PIN_WIRE_SDA PA10 +#define PIN_WIRE_SCL PA9 // Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM17 +#ifndef TIMER_TONE +#define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO #define TIMER_SERVO TIM16 +#endif // UART Definitions #define SERIAL_UART_INSTANCE 1 + // Default pin used for 'Serial' instance // Mandatory for Firmata +#ifndef PIN_SERIAL_RX #define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX #define PIN_SERIAL_TX PA2 +#endif #ifdef ARDUINO_DEMO_F030F4_16M #define HSE_VALUE 16000000U /*!< Value of the External oscillator in Hz */ @@ -96,6 +105,7 @@ extern "C" { #ifdef __cplusplus } // extern "C" #endif + /*---------------------------------------------------------------------------- * Arduino objects - C++ only *----------------------------------------------------------------------------*/ @@ -121,3 +131,4 @@ extern "C" { #endif #endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_* */ diff --git a/variants/STM32F0xx/Generic_F030R8/PeripheralPins.c b/variants/STM32F0xx/Generic_F030R8/PeripheralPins.c new file mode 100644 index 0000000000..bce03f9f96 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/PeripheralPins.c @@ -0,0 +1,205 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F030R8Tx.xml + * CubeMX DB release 6.0.10 + */ +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 + {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 + {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 + {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 + {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 + {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PF_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PF_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 1, 0)}, // TIM3_CH1 + {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 2, 0)}, // TIM3_CH2 + {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 4, 0)}, // TIM3_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** diff --git a/variants/STM32F0xx/NUCLEO_F030R8/PinNamesVar.h b/variants/STM32F0xx/Generic_F030R8/PinNamesVar.h similarity index 56% rename from variants/STM32F0xx/NUCLEO_F030R8/PinNamesVar.h rename to variants/STM32F0xx/Generic_F030R8/PinNamesVar.h index 87d21ee39c..390e0b1ce7 100644 --- a/variants/STM32F0xx/NUCLEO_F030R8/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F030R8/PinNamesVar.h @@ -1,3 +1,15 @@ +/* Alternate pin name */ +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, +PB_14_ALT0 = PB_14 | ALT0, +PB_15_ALT0 = PB_15 | ALT0, +PB_15_ALT1 = PB_15 | ALT1, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -23,3 +35,5 @@ #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = NC, #endif + +/* No USB */ diff --git a/variants/STM32F0xx/Generic_F030R8/ldscript.ld b/variants/STM32F0xx/Generic_F030R8/ldscript.ld new file mode 100644 index 0000000000..62250f7e9d --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/ldscript.ld @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F030R8Tx Device from STM32F0 series + * 64Kbytes FLASH + * 8Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F0xx/Generic_F030R8/variant.cpp b/variants/STM32F0xx/Generic_F030R8/variant.cpp new file mode 100644 index 0000000000..832cc074c8 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/variant.cpp @@ -0,0 +1,195 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F030R8) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PC_0, + PC_1, + PC_2, + PC_3, + PC_4, + PC_5, + PC_6, + PC_7, + PC_8, + PC_9, + PC_10, + PC_11, + PC_12, + PC_13, + PC_14, + PC_15, + PD_2, + PF_0, + PF_1, + PF_4, + PF_5, + PF_6, + PF_7 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17, // A9, PB1 + 32, // A10, PC0 + 33, // A11, PC1 + 34, // A12, PC2 + 35, // A13, PC3 + 36, // A14, PC4 + 37 // A15, PC5 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * or + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F030R8/variant.h b/variants/STM32F0xx/Generic_F030R8/variant.h new file mode 100644 index 0000000000..4b11d48b80 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/variant.h @@ -0,0 +1,191 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F030R8) +#include "variant_DISCO_F030R8.h" +#include "variant_NUCLEO_F030R8.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC0 A10 +#define PC1 A11 +#define PC2 A12 +#define PC3 A13 +#define PC4 A14 +#define PC5 A15 +#define PC6 38 +#define PC7 39 +#define PC8 40 +#define PC9 41 +#define PC10 42 +#define PC11 43 +#define PC12 44 +#define PC13 45 +#define PC14 46 +#define PC15 47 +#define PD2 48 +#define PF0 49 +#define PF1 50 +#define PF4 51 +#define PF5 52 +#define PF6 53 +#define PF7 54 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) + +#define NUM_DIGITAL_PINS 55 +#define NUM_ALTERNATE_PINS 10 +#define NUM_ANALOG_INPUTS 16 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PC9 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PA0 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB0 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB1 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM14 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA10 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA9 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.cpp b/variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.cpp new file mode 100644 index 0000000000..a251479dd4 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.cpp @@ -0,0 +1,150 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_DISCO_F030R8) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + //P1 connector Right side (bottom view) + PC_13, + PC_14, + PC_15, + PF_0, + PF_1, + PC_0, + PC_1, + PC_2, + PC_3, + PA_0, + PA_1, + PA_2, + PA_3, + PF_4, + PF_5, + PA_4, + PA_5, + PA_6, + PA_7, + PC_4, + PC_5, + PB_0, + PB_1, + PB_2, + PB_10, + PB_11, + PB_12, + //P2 connector Left side (bottom view) + PB_9, + PB_8, + PB_7, + PB_6, + PB_5, + PB_4, + PB_3, + PD_2, + PC_12, + PC_11, + PC_10, + PA_15, + PA_14, + PF_7, + PF_6, + PA_13, + PA_12, + PA_11, + PA_10, + PA_9, + PA_8, + PC_9, + PC_8, + PC_7, + PC_6, + PB_15, + PB_14, + PB_13 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 5, //A0 = D5 + 6, //A1 = D6 + 7, //A2 = D7 + 8, //A3 = D8 + 9, //A4 = D9 + 10, //A5 = D10 + 11, //A6 = D11 + 12, //A7 = D12 + 15, //A8 = D15 + 16, //A9 = D16 + 17, //A10 = D17 + 18, //A11 = D18 + 19, //A12 = D19 + 20, //A13 = D20 + 21, //A14 = D21 + 22 //A15 = D22 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_DISCO_F030R8 */ diff --git a/variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.h b/variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.h new file mode 100644 index 0000000000..f020abfbd9 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/variant_DISCO_F030R8.h @@ -0,0 +1,195 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_DISCO_F030R8) + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +// P1 connector Right side (bottom view) +#define PC13 0 +#define PC14 1 +#define PC15 2 +#define PF0 3 +#define PF1 4 +#define PC0 A0 +#define PC1 A1 +#define PC2 A2 +#define PC3 A3 +#define PA0 A4 // USER_BTN +#define PA1 A5 +#define PA2 A6 +#define PA3 A7 +#define PF4 13 +#define PF5 14 +#define PA4 A8 +#define PA5 A9 +#define PA6 A10 +#define PA7 A11 +#define PC4 A12 +#define PC5 A13 +#define PB0 A14 +#define PB1 A15 +#define PB2 23 +#define PB10 24 +#define PB11 25 +#define PB12 26 +// P2 connector Left side (bottom view) +#define PB9 27 +#define PB8 28 +#define PB7 29 +#define PB6 30 +#define PB5 31 +#define PB4 32 +#define PB3 33 +#define PD2 34 +#define PC12 35 +#define PC11 36 +#define PC10 37 +#define PA15 38 +#define PA14 39 +#define PF7 40 +#define PF6 41 +#define PA13 42 +#define PA12 43 +#define PA11 44 +#define PA10 45 +#define PA9 46 +#define PA8 47 +#define PC9 48 // LED_GREEN (LD3) +#define PC8 49 // LED_BLUE (LD4) +#define PC7 50 +#define PC6 51 +#define PB15 52 +#define PB14 53 +#define PB13 54 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) + +#define NUM_DIGITAL_PINS 55 +#define NUM_ALTERNATE_PINS 10 +#define NUM_ANALOG_INPUTS 16 + +//On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PC9 // LD3 +#endif +#define LED_GREEN LED_BUILTIN +#define LED_BLUE PC8 // LD4 + +//On-board user button +#ifndef USER_BTN +#define USER_BTN PA0 +#endif + +// SPI definitions +// SPI1 is used +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PC4 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB12 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PC6 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C Definitions +// I2C1 is used +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB9 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB8 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM14 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 1 +#endif + +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA10 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA9 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_DISCO_F030R8 */ diff --git a/variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.cpp b/variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.cpp new file mode 100644 index 0000000000..a77c7c77ae --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.cpp @@ -0,0 +1,152 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F030R8) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Pin number +const PinName digitalPin[] = { + PA_3, + PA_2, + PA_10, + PB_3, + PB_5, + PB_4, + PB_10, + PA_8, + PA_9, + PC_7, + PB_6, + PA_7, + PA_6, + PA_5, + PB_9, + PB_8, + // ST Morpho + // CN7 Left Side + PC_10, + PC_12, + PF_6, + PF_7, + PA_13, + PA_14, + PA_15, + PB_7, + PC_13, + PC_14, + PC_15, + PF_0, + PF_1, + PC_2, + PC_3, + // CN7 Right Side + PC_11, + PD_2, + // CN10 Left Side + PC_9, + // CN10 Right side + PC_8, + PC_6, + PC_5, + PA_12, + PA_11, + PB_12, + PB_11, + PB_2, + PB_1, + PB_15, + PB_14, + PB_13, + PC_4, + PF_5, + PF_4, + PA_0, + PA_1, + PA_4, + PB_0, + PC_1, + PC_0 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 49, //A0 + 50, //A1 + 51, //A2 + 52, //A3 + 53, //A4 + 54, //A5 + 11, //A6 + 12, //A7 + 29, //A8 + 30, //A9 + 36, //A10 + 46, //A11 + 42, //A12 + 13, //A13 + 1, //A14 + 0 //A15 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_NUCLEO_F030R8 */ diff --git a/variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.h b/variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.h new file mode 100644 index 0000000000..f704350362 --- /dev/null +++ b/variants/STM32F0xx/Generic_F030R8/variant_NUCLEO_F030R8.h @@ -0,0 +1,165 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F030R8) + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +#define PA3 A15 +#define PA2 A14 +#define PA10 2 +#define PB3 3 // no PWM +#define PB5 4 +#define PB4 5 +#define PB10 6 // no PWM +#define PA8 7 +#define PA9 8 +#define PC7 9 +#define PB6 10 +#define PA7 A6 +#define PA6 A7 +#define PA5 A13 +#define PB9 14 +#define PB8 15 +// ST Morpho +// CN7 Left Side +#define PC10 16 +#define PC12 17 +#define PF6 18 +#define PF7 19 +#define PA13 20 // SWD +#define PA14 21 // SWD +#define PA15 22 +#define PB7 23 +#define PC13 24 +#define PC14 25 +#define PC15 26 +#define PF0 27 +#define PF1 28 +#define PC2 A8 +#define PC3 A9 +// CN7 Right Side +#define PC11 31 +#define PD2 32 +// CN10 Left Side +#define PC9 33 +// CN10 Right side +#define PC8 34 +#define PC6 35 +#define PC5 A10 +#define PA12 37 +#define PA11 38 +#define PB12 39 +#define PB11 40 +#define PB2 41 +#define PB1 A12 +#define PB15 43 +#define PB14 44 +#define PB13 45 +#define PC4 A11 +#define PF5 47 +#define PF4 48 +#define PA0 A0 +#define PA1 A1 +#define PA4 A2 +#define PB0 A3 +#define PC1 A4 +#define PC0 A5 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) + +#define NUM_DIGITAL_PINS 55 +#define NUM_ALTERNATE_PINS 10 +#define NUM_ANALOG_INPUTS 16 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PA5 +#endif +#define LED_GREEN LED_BUILTIN + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC13 +#endif + +// Timer Definitions +// Use TIM6 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM14 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link +#endif + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_NUCLEO_F030R8 */ diff --git a/variants/STM32F0xx/Generic_F031K6T/PeripheralPins.c b/variants/STM32F0xx/Generic_F031K6T/PeripheralPins.c new file mode 100644 index 0000000000..cbebb3ea05 --- /dev/null +++ b/variants/STM32F0xx/Generic_F031K6T/PeripheralPins.c @@ -0,0 +1,184 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F031K6Tx.xml + * CubeMX DB release 6.0.10 + */ +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** diff --git a/variants/STM32F0xx/DISCO_F030R8/PinNamesVar.h b/variants/STM32F0xx/Generic_F031K6T/PinNamesVar.h similarity index 65% rename from variants/STM32F0xx/DISCO_F030R8/PinNamesVar.h rename to variants/STM32F0xx/Generic_F031K6T/PinNamesVar.h index 87d21ee39c..56ab37b869 100644 --- a/variants/STM32F0xx/DISCO_F030R8/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F031K6T/PinNamesVar.h @@ -1,3 +1,12 @@ +/* Alternate pin name */ +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -23,3 +32,5 @@ #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = NC, #endif + +/* No USB */ diff --git a/variants/STM32F0xx/NUCLEO_F031K6/ldscript.ld b/variants/STM32F0xx/Generic_F031K6T/ldscript.ld similarity index 93% rename from variants/STM32F0xx/NUCLEO_F031K6/ldscript.ld rename to variants/STM32F0xx/Generic_F031K6T/ldscript.ld index 4e18fdd09d..a2e6df4d4c 100644 --- a/variants/STM32F0xx/NUCLEO_F031K6/ldscript.ld +++ b/variants/STM32F0xx/Generic_F031K6T/ldscript.ld @@ -30,14 +30,14 @@ ENTRY(Reset_Handler) /* Highest address of the user mode stack */ _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ /* Memories definition */ MEMORY { - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 4K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 32K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000+ LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET } /* Sections */ @@ -77,12 +77,12 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab : { + .ARM.extab : { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >FLASH - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -99,7 +99,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >FLASH - + .init_array : { . = ALIGN(4); @@ -109,7 +109,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >FLASH - + .fini_array : { . = ALIGN(4); @@ -124,7 +124,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -133,7 +133,7 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> FLASH /* Uninitialized data section into "RAM" Ram type memory */ diff --git a/variants/STM32F0xx/Generic_F031K6T/variant.cpp b/variants/STM32F0xx/Generic_F031K6T/variant.cpp new file mode 100644 index 0000000000..e688b12dae --- /dev/null +++ b/variants/STM32F0xx/Generic_F031K6T/variant.cpp @@ -0,0 +1,155 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F031K6T) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PF_0, + PF_1 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17 // A9, PB1 +}; + +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * or + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F031K6T/variant.h b/variants/STM32F0xx/Generic_F031K6T/variant.h new file mode 100644 index 0000000000..48cc5527b5 --- /dev/null +++ b/variants/STM32F0xx/Generic_F031K6T/variant.h @@ -0,0 +1,157 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F031K6T) +#include "variant_NUCLEO_F031K6.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB3 18 +#define PB4 19 +#define PB5 20 +#define PB6 21 +#define PB7 22 +#define PF0 23 +#define PF1 24 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) + +#define NUM_DIGITAL_PINS 25 +#define NUM_ALTERNATE_PINS 7 +#define NUM_ANALOG_INPUTS 10 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PB3 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PB0 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA11 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA4 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PA8 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB1 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PB5 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PB4 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PB3 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA15 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.cpp b/variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.cpp new file mode 100644 index 0000000000..c08b38bf01 --- /dev/null +++ b/variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.cpp @@ -0,0 +1,109 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F031K6) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Pin number +const PinName digitalPin[] = { + PA_10, + PA_9, + PA_12, + PB_0, + PB_7, + PB_6, + PB_1, + PF_0, + PF_1, + PA_8, + PA_11, + PB_5, + PB_4, + PB_3, + PA_0, + PA_1, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_2, + PA_15 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 14, // A0 + 15, // A1 + 16, // A2 + 17, // A3 + 18, // A4 + 19, // A5 + 20, // A6 + 21, // A7 + 3, // A8 + 6 // A9 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_NUCLEO_F031K6 */ diff --git a/variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.h b/variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.h new file mode 100644 index 0000000000..0974c6d30e --- /dev/null +++ b/variants/STM32F0xx/Generic_F031K6T/variant_NUCLEO_F031K6.h @@ -0,0 +1,134 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F031K6) +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA10 0 +#define PA9 1 +#define PA12 2 // no PWM +#define PB0 A8 +#define PB7 4 +#define PB6 5 +#define PB1 A9 +#define PF0 7 // no PWM +#define PF1 8 // no PWM +#define PA8 9 +#define PA11 10 +#define PB5 11 +#define PB4 12 +#define PB3 13 // LED +#define PA0 A0 +#define PA1 A1 +#define PA3 A2 +#define PA4 A3 +#define PA5 A4 +#define PA6 A5 +#define PA7 A6 +#define PA2 A7 // SB2 ON STLink Tx +#define PA15 22 // STLink Rx +// #define PA13 23 // SWDIO +// #define PA14 24 // SWCLK + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) + +#define NUM_DIGITAL_PINS 23 +#define NUM_ALTERNATE_PINS 7 +#define NUM_ANALOG_INPUTS 10 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PB3 +#endif +#ifndef LED_GREEN +#define LED_GREEN LED_BUILTIN +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PB0 +#endif + +// I2C Definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +#ifndef TIMER_TONE +#define TIMER_TONE TIM14 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM16 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 1 //Connected to ST-Link +#endif + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA15 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_NUCLEO_F031K6 */ diff --git a/variants/STM32F0xx/Generic_F051KxU/PeripheralPins.c b/variants/STM32F0xx/Generic_F051KxU/PeripheralPins.c new file mode 100644 index 0000000000..cbb5b2b7e6 --- /dev/null +++ b/variants/STM32F0xx/Generic_F051KxU/PeripheralPins.c @@ -0,0 +1,208 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F051K6Ux.xml and merged with STM32F051K4Ux.xml + * CubeMX DB release 6.0.10 + */ +#if defined(ARDUINO_GENERIC_F051K4U) || defined(ARDUINO_GENERIC_F051K6U) || defined(ARDUINO_GENERIC_F051K8U) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { +#if !defined(ARDUINO_GENERIC_F051K4U) + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, +#endif + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, +#if !defined(ARDUINO_GENERIC_F051K4U) + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, +#endif + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { +#if !defined(ARDUINO_GENERIC_F051K4U) + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, +#endif + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, +#if !defined(ARDUINO_GENERIC_F051K4U) + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, +#endif + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { +#if !defined(ARDUINO_GENERIC_F051K4U) + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, +#endif + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { +#if !defined(ARDUINO_GENERIC_F051K4U) + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, +#endif + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F051KxU/PeripheralPins_WRAITH32_V1.c b/variants/STM32F0xx/Generic_F051KxU/PeripheralPins_WRAITH32_V1.c new file mode 100644 index 0000000000..672b696da6 --- /dev/null +++ b/variants/STM32F0xx/Generic_F051KxU/PeripheralPins_WRAITH32_V1.c @@ -0,0 +1,193 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + * Automatically generated from STM32F051K6Ux.xml + */ +#if defined(ARDUINO_WRAITH32_V1) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - RC Input + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + // {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + // PA_2_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - C_FET_LO + // {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - C_FET_LO + // {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - C_FET_LO + // {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - C_FET_LO + // {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - B_FET_HI + // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - A_FET_LO + // {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - A_FET_HI + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - LED_RED + // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - C_FET_HI + // {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - C_FET_HI + // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - B_FET_LO + // {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - B_FET_LO + // {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - B_FET_LO + // {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - LED_GREEN + // {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - LED_BLUE + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + // {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + // {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + // {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* ARDUINO_WRAITH32_V1 */ diff --git a/variants/STM32F0xx/WRAITH32_F051K6/PinNamesVar.h b/variants/STM32F0xx/Generic_F051KxU/PinNamesVar.h similarity index 59% rename from variants/STM32F0xx/WRAITH32_F051K6/PinNamesVar.h rename to variants/STM32F0xx/Generic_F051KxU/PinNamesVar.h index 83817ea403..43b97fb972 100644 --- a/variants/STM32F0xx/WRAITH32_F051K6/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F051KxU/PinNamesVar.h @@ -1,3 +1,14 @@ +/* Alternate pin name */ +PA_2_ALT0 = PA_2 | ALT0, +PA_3_ALT0 = PA_3 | ALT0, +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -22,4 +33,6 @@ #endif #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = NC, -#endif \ No newline at end of file +#endif + +/* No USB */ diff --git a/variants/STM32F0xx/Generic_F051KxU/ldscript.ld b/variants/STM32F0xx/Generic_F051KxU/ldscript.ld new file mode 100644 index 0000000000..c30be47a1a --- /dev/null +++ b/variants/STM32F0xx/Generic_F051KxU/ldscript.ld @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F051K6Ux Device from STM32F0 series + * 32Kbytes FLASH + * 8Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F0xx/WRAITH32_F051K6/readme.txt b/variants/STM32F0xx/Generic_F051KxU/readme_WRAITH32_V1.txt similarity index 100% rename from variants/STM32F0xx/WRAITH32_F051K6/readme.txt rename to variants/STM32F0xx/Generic_F051KxU/readme_WRAITH32_V1.txt diff --git a/variants/STM32F0xx/Generic_F051KxU/variant.cpp b/variants/STM32F0xx/Generic_F051KxU/variant.cpp new file mode 100644 index 0000000000..19a2a5d663 --- /dev/null +++ b/variants/STM32F0xx/Generic_F051KxU/variant.cpp @@ -0,0 +1,157 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F051K4U) || defined(ARDUINO_GENERIC_F051K6U) || defined(ARDUINO_GENERIC_F051K8U) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PF_0, + PF_1 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17 // A9, PB1 +}; + +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * and + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F051KxU/variant.h b/variants/STM32F0xx/Generic_F051KxU/variant.h new file mode 100644 index 0000000000..f2333265aa --- /dev/null +++ b/variants/STM32F0xx/Generic_F051KxU/variant.h @@ -0,0 +1,164 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F051K4U) && !defined(ARDUINO_GENERIC_F051K6U) && !defined(ARDUINO_GENERIC_F051K8U) +#include "variant_WRAITH32_V1.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PF0 25 +#define PF1 26 + +// Alternate pins number +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) + +#define NUM_DIGITAL_PINS 27 +#define NUM_ALTERNATE_PINS 9 +#define NUM_ANALOG_INPUTS 10 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PB3 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PB5 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB0 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB1 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM14 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA10 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA9 +#endif + +// Extra HAL modules +#define HAL_DAC_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.cpp b/variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.cpp new file mode 100644 index 0000000000..4c3569e759 --- /dev/null +++ b/variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.cpp @@ -0,0 +1,110 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_WRAITH32_V1) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Pin number +const PinName digitalPin[] = { + PA_10, + PA_9, + PA_12, + PB_0, + PB_7, + PB_6, + PB_1, + PF_0, + PF_1, + PA_8, + PA_11, + PB_5, + PB_4, + PB_3, + PA_0, + PA_1, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_2, + PA_15 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 14, // A0 + 15, // A1 + 16, // A2 + 17, // A3 + 18, // A4 + 19, // A5 + 20 // A6 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI14 + | RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI14State = RCC_HSI14_ON; + RCC_OscInitStruct.HSICalibrationValue = 16; + RCC_OscInitStruct.HSI14CalibrationValue = 16; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + while (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + while (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_WRAITH32_V1 */ diff --git a/variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.h b/variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.h new file mode 100644 index 0000000000..8e1ebb46b4 --- /dev/null +++ b/variants/STM32F0xx/Generic_F051KxU/variant_WRAITH32_V1.h @@ -0,0 +1,136 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_WRAITH32_V1) +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +#define PA10 0 +#define PA9 1 +#define PA12 2 +#define PB0 3 +#define PB7 4 // RX, SDA +#define PB6 5 // TX, SCL +#define PB1 6 +#define PF0 7 +#define PF1 8 +#define PA8 9 +#define PA11 10 +#define PB5 11 +#define PB4 12 // LED_BLUE +#define PB3 13 // LED_GREEN +#define PA0 A0 +#define PA1 A1 +#define PA3 A2 +#define PA4 A3 +#define PA5 A4 +#define PA6 A5 +#define PA7 A6 +#define PA2 21 // RC Input +#define PA15 22 // LED_RED +// Pins not defined +// PA13, PA14, PB2, PB8 + +// Alternate pins number +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) + +#define NUM_DIGITAL_PINS 23 +#define NUM_ALTERNATE_PINS 9 +#define NUM_ANALOG_INPUTS 7 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PB3 +#endif +#define LED_GREEN LED_BUILTIN +#define LED_BLUE PB4 +#define LED_RED PA15 + +// On-board user button +#ifndef USER_BTN +#define USER_BTN NC +#endif + +// I2C Definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM6 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 2 +#endif + +// Serial Pin Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PB7 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PB6 +#endif + +/* Extra HAL modules */ +#define HAL_DAC_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_WRAITH32_V1 */ diff --git a/variants/STM32F0xx/MALYANMx00_F070CB/ldscript.ld b/variants/STM32F0xx/Generic_F070CB/MALYANMx00_F070CB.ld similarity index 97% rename from variants/STM32F0xx/MALYANMx00_F070CB/ldscript.ld rename to variants/STM32F0xx/Generic_F070CB/MALYANMx00_F070CB.ld index 30b43db4c6..30c10e9b03 100644 --- a/variants/STM32F0xx/MALYANMx00_F070CB/ldscript.ld +++ b/variants/STM32F0xx/Generic_F070CB/MALYANMx00_F070CB.ld @@ -10,7 +10,7 @@ _Min_Stack_Size = 0x400;; /* required amount of stack */ /* Specify the memory areas */ MEMORY { -FLASH (rx) : ORIGIN = 0x08002000, LENGTH = 120K +FLASH (rx) : ORIGIN = 0x08000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET VTRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 0xC0 RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 15K - 0xC0 } diff --git a/variants/STM32F0xx/Generic_F070CB/PeripheralPins.c b/variants/STM32F0xx/Generic_F070CB/PeripheralPins.c new file mode 100644 index 0000000000..cc19156e0d --- /dev/null +++ b/variants/STM32F0xx/Generic_F070CB/PeripheralPins.c @@ -0,0 +1,217 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F070CBTx.xml + * CubeMX DB release 6.0.10 + */ +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) +WEAK const PinMap PinMap_USB[] = { + {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM + {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP + {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE + {NC, NP, 0} +}; +#endif + +//*** No SD *** diff --git a/variants/STM32F0xx/MALYANMx00_F070CB/PinNamesVar.h b/variants/STM32F0xx/Generic_F070CB/PinNamesVar.h similarity index 57% rename from variants/STM32F0xx/MALYANMx00_F070CB/PinNamesVar.h rename to variants/STM32F0xx/Generic_F070CB/PinNamesVar.h index 6d0d761274..0bbc1937e6 100644 --- a/variants/STM32F0xx/MALYANMx00_F070CB/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F070CB/PinNamesVar.h @@ -1,3 +1,15 @@ +/* Alternate pin name */ +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, +PB_14_ALT0 = PB_14 | ALT0, +PB_15_ALT0 = PB_15 | ALT0, +PB_15_ALT1 = PB_15 | ALT1, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -23,9 +35,10 @@ #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = NC, #endif + /* USB */ #ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, + USB_DM = PA_11, + USB_DP = PA_12, USB_NOE = PA_13, #endif diff --git a/variants/STM32F0xx/PYBSTICK26_DUINO/ldscript.ld b/variants/STM32F0xx/Generic_F070CB/ldscript.ld similarity index 98% rename from variants/STM32F0xx/PYBSTICK26_DUINO/ldscript.ld rename to variants/STM32F0xx/Generic_F070CB/ldscript.ld index afab235ad9..e0a20d7fbb 100644 --- a/variants/STM32F0xx/PYBSTICK26_DUINO/ldscript.ld +++ b/variants/STM32F0xx/Generic_F070CB/ldscript.ld @@ -2,7 +2,7 @@ ****************************************************************************** * @file LinkerScript.ld * @author Auto-generated by STM32CubeIDE - * @brief Linker script for STM32F072RBHx Device from STM32F0 series + * @brief Linker script for STM32F070CBTx Device from STM32F0 series * 128Kbytes FLASH * 16Kbytes RAM * diff --git a/variants/STM32F0xx/MALYANMx00_F070CB/startup_Mx00_f070xb.S b/variants/STM32F0xx/Generic_F070CB/startup_Mx00_f070xb.S similarity index 100% rename from variants/STM32F0xx/MALYANMx00_F070CB/startup_Mx00_f070xb.S rename to variants/STM32F0xx/Generic_F070CB/startup_Mx00_f070xb.S diff --git a/variants/STM32F0xx/Generic_F070CB/variant.cpp b/variants/STM32F0xx/Generic_F070CB/variant.cpp new file mode 100644 index 0000000000..46e5e5df33 --- /dev/null +++ b/variants/STM32F0xx/Generic_F070CB/variant.cpp @@ -0,0 +1,179 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F070CB) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PC_13, + PC_14, + PC_15, + PF_0, + PF_1 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17 // A9, PB1 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * or + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F070CB/variant.h b/variants/STM32F0xx/Generic_F070CB/variant.h new file mode 100644 index 0000000000..5c5041a082 --- /dev/null +++ b/variants/STM32F0xx/Generic_F070CB/variant.h @@ -0,0 +1,172 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F070CB) +#include "variant_MALYANMx00_F070CB.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC13 32 +#define PC14 33 +#define PC15 34 +#define PF0 35 +#define PF1 36 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) + +#define NUM_DIGITAL_PINS 37 +#define NUM_ALTERNATE_PINS 10 +#define NUM_ANALOG_INPUTS 10 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PC13 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC14 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB0 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB1 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 4 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA0 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/MALYANMx00_F070CB/variant.cpp b/variants/STM32F0xx/Generic_F070CB/variant_MALYANMx00_F070CB.cpp similarity index 64% rename from variants/STM32F0xx/MALYANMx00_F070CB/variant.cpp rename to variants/STM32F0xx/Generic_F070CB/variant_MALYANMx00_F070CB.cpp index c4da778ae4..d2ff4d640c 100644 --- a/variants/STM32F0xx/MALYANMx00_F070CB/variant.cpp +++ b/variants/STM32F0xx/Generic_F070CB/variant_MALYANMx00_F070CB.cpp @@ -1,32 +1,17 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_MALYANM200_F070CB) || defined(ARDUINO_MALYANM300_F070CB) + #include "pins_arduino.h" #include @@ -45,42 +30,44 @@ volatile uint32_t ram_vector_table[48] __attribute__((section(".RAMVectorTable") const PinName digitalPin[] = { /* USB connector on the top, MCU side */ /* Left Side */ - PB_9, //D0 - PB_8, //D1 - PB_7, //D2 - PB_6, //D3 - PB_5, //D4 - PB_4, //D5 - PB_3, //D6 - PA_15, //D7 - PA_12, //D8 - USB DP - PA_11, //D9 - USB DM - PA_10, //D10 - PA_9, //D11 - PA_8, //D12 - PB_15, //D13 - PB_14, //D14 - PB_13, //D15 - PB_12, //D16 + PB_9, + PB_8, + PB_7, + PB_6, + PB_5, + PB_4, + PB_3, + PA_15, + PA_12, + PA_11, + PA_10, + PA_9, + PA_8, + PB_15, + PB_14, + PB_13, + PB_12, /* Right side */ - PC_13, //D17 - LED - PC_14, //D18 - PC_15, //D19 - PA_0, //D20/A0 - PA_1, //D21/A1 - PA_2, //D22/A2 - PA_3, //D23/A3 - PA_4, //D24/A4 - PA_5, //D25/A5 - PA_6, //D26/A6 - PA_7, //D27/A7 - PB_0, //D28/A8 - PB_1, //D29/A9 - PB_10, //D30 - PB_11, //D31 - PB_2, //D32 - BOOT1 - PA_13, //D33 - SWDI0 - PA_14, //D34 - SWCLK + PC_13, + PC_14, + PC_15, + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PB_0, + PB_1, + PB_10, + PB_11, + PB_2, + PA_13, + PA_14, + PF_0, + PF_1 }; // Analog (Ax) pin number array @@ -184,3 +171,4 @@ WEAK void SystemClock_Config(void) #ifdef __cplusplus } #endif +#endif /* ARDUINO_MALYANMx00_F070CB */ diff --git a/variants/STM32F0xx/MALYANMx00_F070CB/variant.h b/variants/STM32F0xx/Generic_F070CB/variant_MALYANMx00_F070CB.h similarity index 62% rename from variants/STM32F0xx/MALYANMx00_F070CB/variant.h rename to variants/STM32F0xx/Generic_F070CB/variant_MALYANMx00_F070CB.h index 311a406a8c..c505ec6b8d 100644 --- a/variants/STM32F0xx/MALYANMx00_F070CB/variant.h +++ b/variants/STM32F0xx/Generic_F070CB/variant_MALYANMx00_F070CB.h @@ -1,32 +1,16 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_MALYANM200_F070CB) || defined(ARDUINO_MALYANM300_F070CB) #ifndef _VARIANT_ARDUINO_STM32_ #define _VARIANT_ARDUINO_STM32_ @@ -65,47 +49,60 @@ extern "C" { // USB connector on the top, MCU side // Left Side -#define PB9 0 -#define PB8 1 -#define PB7 2 -#define PB6 3 -#define PB5 4 -#define PB4 5 -#define PB3 6 -#define PA15 7 -#define PA12 8 // USB DP -#define PA11 9 // USB DM -#define PA10 10 -#define PA9 11 -#define PA8 12 -#define PB15 13 -#define PB14 14 -#define PB13 15 -#define PB12 16 +#define PB9 0 +#define PB8 1 +#define PB7 2 +#define PB6 3 +#define PB5 4 +#define PB4 5 +#define PB3 6 +#define PA15 7 +#define PA12 8 // USB DP +#define PA11 9 // USB DM +#define PA10 10 +#define PA9 11 +#define PA8 12 +#define PB15 13 +#define PB14 14 +#define PB13 15 +#define PB12 16 // Right side -#define PC13 17 -#define PC14 18 -#define PC15 19 -#define PA0 A0 -#define PA1 A1 -#define PA2 A2 -#define PA3 A3 -#define PA4 A4 -#define PA5 A5 -#define PA6 A6 -#define PA7 A7 -#define PB0 A8 -#define PB1 A9 -#define PB10 30 -#define PB11 31 +#define PC13 17 +#define PC14 18 +#define PC15 19 +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PB0 A8 +#define PB1 A9 +#define PB10 30 +#define PB11 31 // Other -#define PB2 32 // BOOT1 -#define PA13 33 // SWDI0 -#define PA14 34 // SWCLK +#define PB2 32 // BOOT1 +#define PA13 33 // SWDI0 +#define PA14 34 // SWCLK +#define PF0 35 +#define PF1 36 + +// Alternate pins number +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) -// This must be a literal -#define NUM_DIGITAL_PINS 35 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS +#define NUM_DIGITAL_PINS 37 +#define NUM_ALTERNATE_PINS 10 #define NUM_ANALOG_INPUTS 10 // On-board LED pin number @@ -175,3 +172,4 @@ extern "C" { #endif #endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_MALYANMx00_F070CB */ diff --git a/variants/STM32F0xx/Generic_F072Cx/PeripheralPins.c b/variants/STM32F0xx/Generic_F072Cx/PeripheralPins.c new file mode 100644 index 0000000000..11cea8aabd --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Cx/PeripheralPins.c @@ -0,0 +1,252 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F072C(8-B)Ux.xml + * CubeMX DB release 6.0.10 + */ +#if defined(ARDUINO_GENERIC_F072C8) || defined(ARDUINO_GENERIC_F072CB) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PA_1_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_TD[] = { + {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) +WEAK const PinMap PinMap_USB[] = { + {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM + {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP + {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE + {NC, NP, 0} +}; +#endif + +//*** No SD *** +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F072Cx/PeripheralPins_ELEKTOR_F072Cx.c b/variants/STM32F0xx/Generic_F072Cx/PeripheralPins_ELEKTOR_F072Cx.c new file mode 100644 index 0000000000..869be47670 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Cx/PeripheralPins_ELEKTOR_F072Cx.c @@ -0,0 +1,252 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F072C(8-B)Ux.xml + * CubeMX DB release 6.0.10 + */ +#if defined(ARDUINO_ELEKTOR_F072C8) || defined(ARDUINO_ELEKTOR_F072CB) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PA_1_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_TD[] = { + {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) +WEAK const PinMap PinMap_USB[] = { + {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM + {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP + // {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE + {NC, NP, 0} +}; +#endif + +//*** No SD *** +#endif /* ARDUINO_ELEKTOR_F072x */ diff --git a/variants/STM32F0xx/ELEKTOR_F072Cx/PinNamesVar.h b/variants/STM32F0xx/Generic_F072Cx/PinNamesVar.h similarity index 57% rename from variants/STM32F0xx/ELEKTOR_F072Cx/PinNamesVar.h rename to variants/STM32F0xx/Generic_F072Cx/PinNamesVar.h index 9906c8e95b..582f7e4ca1 100644 --- a/variants/STM32F0xx/ELEKTOR_F072Cx/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F072Cx/PinNamesVar.h @@ -1,3 +1,18 @@ +/* Alternate pin name */ +PA_1_ALT0 = PA_1 | ALT0, +PA_2_ALT0 = PA_2 | ALT0, +PA_3_ALT0 = PA_3 | ALT0, +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, +PB_14_ALT0 = PB_14 | ALT0, +PB_15_ALT0 = PB_15 | ALT0, +PB_15_ALT1 = PB_15 | ALT1, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -23,9 +38,10 @@ #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = PF_2, /* Not available in LQFP48 */ #endif + /* USB */ #ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, + USB_DM = PA_11, + USB_DP = PA_12, USB_NOE = PA_13, #endif diff --git a/variants/STM32F0xx/Generic_F072Cx/ldscript.ld b/variants/STM32F0xx/Generic_F072Cx/ldscript.ld new file mode 100644 index 0000000000..25d7b3c489 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Cx/ldscript.ld @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F072CBTx Device from STM32F0 series + * 128Kbytes FLASH + * 16Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F0xx/Generic_F072Cx/variant.cpp b/variants/STM32F0xx/Generic_F072Cx/variant.cpp new file mode 100644 index 0000000000..b7788640fd --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Cx/variant.cpp @@ -0,0 +1,176 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F072C8) || defined(ARDUINO_GENERIC_F072CB) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PC_13, + PC_14, + PC_15, + PF_0, + PF_1 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17 // A9, PB1 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI48) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI48(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * or + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI48 clock */ + if (SetSysClock_PLL_HSI48() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F072Cx/variant.h b/variants/STM32F0xx/Generic_F072Cx/variant.h new file mode 100644 index 0000000000..0f9d807ae3 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Cx/variant.h @@ -0,0 +1,178 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F072C8) && !defined(ARDUINO_GENERIC_F072CB) +#include "variant_ELEKTOR_F072Cx.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC13 32 +#define PC14 33 +#define PC15 34 +#define PF0 35 +#define PF1 36 + +// Alternate pins number +#define PA1_ALT0 (PA1 | ALT0) +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) + +#define NUM_DIGITAL_PINS 37 +#define NUM_ALTERNATE_PINS 13 +#define NUM_ANALOG_INPUTS 10 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PC13 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC14 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB0 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB1 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 4 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA1 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA0 +#endif + +// Extra HAL modules +#define HAL_DAC_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F072Cx/variant_ELEKTOR_F072Cx.cpp b/variants/STM32F0xx/Generic_F072Cx/variant_ELEKTOR_F072Cx.cpp new file mode 100644 index 0000000000..b6c5f1d81f --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Cx/variant_ELEKTOR_F072Cx.cpp @@ -0,0 +1,107 @@ +#if defined(ARDUINO_ELEKTOR_F072C8) || defined(ARDUINO_ELEKTOR_F072CB) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Pin name +const PinName digitalPin[] = { + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PC_13, + PC_14, + PC_15, + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PB_0, + PB_1, + PF_0, + PF_1 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 25, // A0 + 26, // A1 + 27, // A2 + 28, // A3 + 29, // A4 + 30, // A5 + 31, // A6 + 32, // A7 + 33, // A8 + 34 // A9 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + + /* Initializes the CPU, AHB and APB busses clocks */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB busses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_ELEKTOR_F072x */ diff --git a/variants/STM32F0xx/ELEKTOR_F072Cx/variant.h b/variants/STM32F0xx/Generic_F072Cx/variant_ELEKTOR_F072Cx.h similarity index 52% rename from variants/STM32F0xx/ELEKTOR_F072Cx/variant.h rename to variants/STM32F0xx/Generic_F072Cx/variant_ELEKTOR_F072Cx.h index cbc3c00b55..2b58a46079 100644 --- a/variants/STM32F0xx/ELEKTOR_F072Cx/variant.h +++ b/variants/STM32F0xx/Generic_F072Cx/variant_ELEKTOR_F072Cx.h @@ -1,32 +1,16 @@ /* ******************************************************************************* - * Copyright (c) 2017, STMicroelectronics + * Copyright (c) 2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_ELEKTOR_F072C8) || defined(ARDUINO_ELEKTOR_F072CB) #ifndef _VARIANT_ARDUINO_STM32_ #define _VARIANT_ARDUINO_STM32_ @@ -39,46 +23,61 @@ extern "C" { * Pins *----------------------------------------------------------------------------*/ -#define PA8 0 -#define PA9 1 -#define PA10 2 -#define PA11 3 -#define PA12 4 -#define PA13 5 -#define PA14 6 -#define PA15 7 -#define PB2 8 -#define PB3 9 -#define PB4 10 -#define PB5 11 -#define PB6 12 -#define PB7 13 -#define PB8 14 -#define PB9 15 -#define PB10 16 -#define PB11 17 -#define PB12 18 -#define PB13 19 -#define PB14 20 -#define PB15 21 -#define PC13 22 -#define PC14 23 -#define PC15 24 -#define PA0 A0 -#define PA1 A1 -#define PA2 A2 -#define PA3 A3 -#define PA4 A4 -#define PA5 A5 -#define PA6 A6 -#define PA7 A7 -#define PB0 A8 -#define PB1 A9 -#define PF0 35 -#define PF1 36 - -// This must be a literal +#define PA8 0 +#define PA9 1 +#define PA10 2 +#define PA11 3 +#define PA12 4 +#define PA13 5 +#define PA14 6 +#define PA15 7 +#define PB2 8 +#define PB3 9 +#define PB4 10 +#define PB5 11 +#define PB6 12 +#define PB7 13 +#define PB8 14 +#define PB9 15 +#define PB10 16 +#define PB11 17 +#define PB12 18 +#define PB13 19 +#define PB14 20 +#define PB15 21 +#define PC13 22 +#define PC14 23 +#define PC15 24 +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PB0 A8 +#define PB1 A9 +#define PF0 35 +#define PF1 36 + +// Alternate pins number +#define PA1_ALT0 (PA1 | ALT0) +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) + #define NUM_DIGITAL_PINS 37 +#define NUM_ALTERNATE_PINS 13 #define NUM_ANALOG_INPUTS 10 // On-board LED pin number @@ -110,8 +109,8 @@ extern "C" { #define PIN_SERIAL_TX PA9 //Used for the GPS Module -#define PIN_SERIAL2_TX PA2 -#define PIN_SERIAL2_RX PA3 +#define PIN_SERIAL2_TX PA2 +#define PIN_SERIAL2_RX PA3 // Extra HAL modules #define HAL_DAC_MODULE_ENABLED @@ -144,3 +143,4 @@ extern "C" { #endif #endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_ELEKTOR_F072x */ diff --git a/variants/STM32F0xx/Generic_F072Rx/PeripheralPins.c b/variants/STM32F0xx/Generic_F072Rx/PeripheralPins.c new file mode 100644 index 0000000000..1f9c2a763e --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/PeripheralPins.c @@ -0,0 +1,272 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F072R(8-B)Tx.xml + * CubeMX DB release 6.0.10 + */ +#if defined(ARDUINO_GENERIC_F072R8) || defined(ARDUINO_GENERIC_F072RB) ||\ + defined(ARDUINO_DISCO_F072RB) || defined(ARDUINO_NUCLEO_F072RB) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 + {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 + {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 + {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 + {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 + {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PA_1_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 1, 0)}, // TIM3_CH1 + {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 2, 0)}, // TIM3_CH2 + {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 3, 0)}, // TIM3_CH3 + {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 4, 0)}, // TIM3_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_10_ALT0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_11_ALT0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_TD[] = { + {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) +WEAK const PinMap PinMap_USB[] = { + {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM + {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP + {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE + {NC, NP, 0} +}; +#endif + +//*** No SD *** +#endif /* ARDUINO_* */ diff --git a/variants/STM32F0xx/Generic_F072Rx/PeripheralPins_PYBSTICK26_DUINO.c b/variants/STM32F0xx/Generic_F072Rx/PeripheralPins_PYBSTICK26_DUINO.c new file mode 100644 index 0000000000..b8a56d89ee --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/PeripheralPins_PYBSTICK26_DUINO.c @@ -0,0 +1,271 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F072R(8-B)Tx.xml + * CubeMX DB release 6.0.10 + */ +#if defined(ARDUINO_PYBSTICK26_DUINO) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + // {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + // {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + // {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + // {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 + // {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 + // {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 + {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 + // {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 + {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + // {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + // {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + // {PA_1_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + // {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + // {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + // {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + // {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + // {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + // {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 1, 0)}, // TIM3_CH1 + {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 2, 0)}, // TIM3_CH2 + // {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 3, 0)}, // TIM3_CH3 + // {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 4, 0)}, // TIM3_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + // {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + // {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + // {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + // {PC_10_ALT0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + // {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + // {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_11_ALT0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + // {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + // {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + // {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + // {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + // {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + // {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + // {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + // {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + // {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + // {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_TD[] = { + {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) +WEAK const PinMap PinMap_USB[] = { + {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM + {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP + // {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE + {NC, NP, 0} +}; +#endif + +//*** No SD *** +#endif /* ARDUINO_PYBSTICK26_DUINO */ diff --git a/variants/STM32F0xx/DISCO_F072RB/PinNamesVar.h b/variants/STM32F0xx/Generic_F072Rx/PinNamesVar.h similarity index 52% rename from variants/STM32F0xx/DISCO_F072RB/PinNamesVar.h rename to variants/STM32F0xx/Generic_F072Rx/PinNamesVar.h index 52526fe78b..c5dcea7517 100644 --- a/variants/STM32F0xx/DISCO_F072RB/PinNamesVar.h +++ b/variants/STM32F0xx/Generic_F072Rx/PinNamesVar.h @@ -1,3 +1,20 @@ +/* Alternate pin name */ +PA_1_ALT0 = PA_1 | ALT0, +PA_2_ALT0 = PA_2 | ALT0, +PA_3_ALT0 = PA_3 | ALT0, +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, +PB_14_ALT0 = PB_14 | ALT0, +PB_15_ALT0 = PB_15 | ALT0, +PB_15_ALT1 = PB_15 | ALT1, +PC_10_ALT0 = PC_10 | ALT0, +PC_11_ALT0 = PC_11 | ALT0, + /* SYS_WKUP */ #ifdef PWR_WAKEUP_PIN1 SYS_WKUP1 = PA_0, @@ -23,9 +40,10 @@ #ifdef PWR_WAKEUP_PIN8 SYS_WKUP8 = PF_2, /* Manually updated */ #endif + /* USB */ #ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, + USB_DM = PA_11, + USB_DP = PA_12, USB_NOE = PA_13, #endif diff --git a/variants/STM32F0xx/Generic_F072Rx/ldscript.ld b/variants/STM32F0xx/Generic_F072Rx/ldscript.ld new file mode 100644 index 0000000000..76a420c45f --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/ldscript.ld @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F072RBTx Device from STM32F0 series + * 128Kbytes FLASH + * 16Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F0xx/Generic_F072Rx/variant.cpp b/variants/STM32F0xx/Generic_F072Rx/variant.cpp new file mode 100644 index 0000000000..40aa7cb04e --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/variant.cpp @@ -0,0 +1,197 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F072R8) || defined(ARDUINO_GENERIC_F072RB) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PC_0, + PC_1, + PC_2, + PC_3, + PC_4, + PC_5, + PC_6, + PC_7, + PC_8, + PC_9, + PC_10, + PC_11, + PC_12, + PC_13, + PC_14, + PC_15, + PD_2, + PF_0, + PF_1 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17, // A9, PB1 + 32, // A10, PC0 + 33, // A11, PC1 + 34, // A12, PC2 + 35, // A13, PC3 + 36, // A14, PC4 + 37 // A15, PC5 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI48) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI48(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * or + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI48 clock */ + if (SetSysClock_PLL_HSI48() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F072Rx/variant.h b/variants/STM32F0xx/Generic_F072Rx/variant.h new file mode 100644 index 0000000000..6acf9cee88 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/variant.h @@ -0,0 +1,196 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F072R8) && !defined(ARDUINO_GENERIC_F072RB) +#include "variant_DISCO_F072RB.h" +#include "variant_NUCLEO_F072RB.h" +#include "variant_PYBSTICK26_DUINO.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC0 A10 +#define PC1 A11 +#define PC2 A12 +#define PC3 A13 +#define PC4 A14 +#define PC5 A15 +#define PC6 38 +#define PC7 39 +#define PC8 40 +#define PC9 41 +#define PC10 42 +#define PC11 43 +#define PC12 44 +#define PC13 45 +#define PC14 46 +#define PC15 47 +#define PD2 48 +#define PF0 49 +#define PF1 50 + +// Alternate pins number +#define PA1_ALT0 (PA1 | ALT0) +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) +#define PC10_ALT0 (PC10 | ALT0) +#define PC11_ALT0 (PC11 | ALT0) + +#define NUM_DIGITAL_PINS 51 +#define NUM_ALTERNATE_PINS 15 +#define NUM_ANALOG_INPUTS 16 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PA5 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC13 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB0 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB1 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 2 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +// Extra HAL modules +#define HAL_DAC_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.cpp b/variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.cpp new file mode 100644 index 0000000000..a75b8c0df7 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.cpp @@ -0,0 +1,172 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_DISCO_F072RB) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Pin number +const PinName digitalPin[] = { + //P2 connector Right side (top view) + PB_9, + PB_8, + PB_7, + PB_6, + PB_5, + PB_4, + PB_3, + PD_2, + PC_12, + PC_11, + PC_10, + PA_15, + PA_14, + PA_13, +#ifdef USB_REMOVED + PA_12, + PA_11, +#else + NC, + NC, +#endif + PA_10, + PA_9, + PA_8, + PC_9, + PC_8, + PC_7, + PC_6, + PB_15, + PB_14, + PB_13, + //P1 connector Left side (top view) + PC_13, + PC_14, + PC_15, + PF_0, + PF_1, + PC_0, + PC_1, + PC_2, + PC_3, + PA_0, + PA_1, +#ifdef TSC_REMOVED + PA_2, + PA_3, +#else + NC, + NC, +#endif + PA_4, + PA_5, +#ifdef TSC_REMOVED + PA_6, + PA_7, +#else + NC, + NC, +#endif + PC_4, + PC_5, +#ifdef TSC_REMOVED + PB_0, + PB_1, +#else + NC, + NC, +#endif + PB_2, + PB_10, + PB_11, + PB_12 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 31, // A0 + 32, // A1 + 33, // A2 + 34, // A3 + 35, // A4 + 36, // A5 + 37, // A6 + 38, // A7 + 39, // A8 + 40, // A9 + 41, // A10 + 42, // A11 + 43, // A12 + 44, // A13 + 45, // A14 + 46 // A15 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + + /* Initializes the CPU, AHB and APB busses clocks */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB busses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_DISCO_F072RB */ diff --git a/variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.h b/variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.h new file mode 100644 index 0000000000..a1a14f9cd0 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/variant_DISCO_F072RB.h @@ -0,0 +1,213 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_DISCO_F072RB) + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +// USB USER CN2 +// By default, SB20,23 (USB-USER) are OFF. +// So PA11,12 are not available. +// If ON and R12,13 removed, +// #define USB_REMOVED +// to get PA11,12 available. + +// Linear touch sensor +// By default, SB27,28,29,30,31,32 (touch sensor) are OFF. +// So PA2,3,6,7 and PB0,1 are not available. +// If ON and R38,39,40 and C26,27,28 are removed, +// #define TSC_REMOVED +// to get PA2,3,6,7 and PB0,1 available. + +// P2 connector Right side (top view) +#define PB9 0 +#define PB8 1 +#define PB7 2 +#define PB6 3 +#define PB5 4 +#define PB4 5 +#define PB3 6 +#define PD2 7 +#define PC12 8 +#define PC11 9 +#define PC10 10 +#define PA15 11 +#define PA14 12 +#define PA13 13 +#define PA12 14 // SB20 (default OFF): USB_DP +#define PA11 15 // SB23 (default OFF): USB_DM +#define PA10 16 +#define PA9 17 +#define PA8 18 +#define PC9 19 // LED_GREEN (LD4) +#define PC8 20 // LED_ORANGE (LD3) +#define PC7 21 // LED_BLUE (LD6) +#define PC6 22 // LED_RED (LD5) +#define PB15 23 // SPI2_MOSI (L3GD20) +#define PB14 24 // SPI2_MISO (L3GD20) +#define PB13 25 // SPI2_SCK (L3GD20) +// P1 connector Left side (top view) +#define PC13 26 +#define PC14 27 +#define PC15 28 +#define PF0 29 +#define PF1 30 +#define PC0 A0 // NCS_MEMS_SPI (L3GD20) +#define PC1 A1 // MEMS INT1 (L3GD20) +#define PC2 A2 // MEMS INT2 (L3GD20) +#define PC3 A3 +#define PA0 A4 // USER_BTN +#define PA1 A5 +#define PA2 A6 // SB27 (default OFF): TS_G1_IO3 +#define PA3 A7 // SB28 (default OFF): TS_G1_IO4 +#define PA4 A8 +#define PA5 A9 +#define PA6 A10 // SB29 (default OFF): TS_G2_IO3 +#define PA7 A11 // SB30 (default OFF): TS_G2_IO4 +#define PC4 A12 +#define PC5 A13 // Ext Reset +#define PB0 A14 // SB31 (default OFF): TS_G3_IO2 +#define PB1 A15 // SB32 (default OFF): TS_G3_IO3 +#define PB2 47 +#define PB10 48 // I2C2 SCL: Extension / RF EEprom Connector +#define PB11 49 // I2C2 SDA: Extension / RF EEprom Connector +#define PB12 50 + +// Alternate pins number +#define PA1_ALT0 (PA1 | ALT0) +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) +#define PC10_ALT0 (PC10 | ALT0) +#define PC11_ALT0 (PC11 | ALT0) + +#define NUM_DIGITAL_PINS 51 +#define NUM_ALTERNATE_PINS 15 +#define NUM_ANALOG_INPUTS 16 + +//On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PC9 +#endif +#define LED_GREEN LED_BUILTIN +#define LED_ORANGE PC8 +#define LED_BLUE PC7 +#define LED_RED PC6 + +//On-board user button +#ifndef LED_BUILTIN +#define LED_BUILTIN PA0 +#endif + +// SPI definitions +// SPI1 is used +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PC4 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB12 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB6 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PB5 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PB4 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PB3 +#endif + +// I2C Definitions +// I2C1 is used +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PB9 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PB8 +#endif + + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 1 // USART 1 +#endif + +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA10 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA9 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_DISCO_F072RB */ diff --git a/variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.cpp b/variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.cpp new file mode 100644 index 0000000000..effbc046e3 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.cpp @@ -0,0 +1,154 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F072RB) + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Pin number +const PinName digitalPin[] = { + PA_3, + PA_2, + PA_10, + PB_3, + PB_5, + PB_4, + PB_10, + PA_8, + PA_9, + PC_7, + PB_6, + PA_7, + PA_6, + PA_5, + PB_9, + PB_8, + // ST Morpho + // CN7 Left Side + PC_10, + PC_12, + PA_13, + PA_14, + PA_15, + PB_7, + PC_13, + PC_14, + PC_15, + PF_0, + PF_1, + PC_2, + PC_3, + // CN7 Right Side + PC_11, + PD_2, + // CN10 Left Side + PC_9, + // CN10 Right side + PC_8, + PC_6, + PC_5, + PA_12, + PA_11, + PB_12, + PB_11, + PB_2, + PB_1, + PB_15, + PB_14, + PB_13, + PC_4, + PA_0, + PA_1, + PA_4, + PB_0, + PC_1, + PC_0 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 45, //A0 + 46, //A1 + 47, //A2 + 48, //A3 + 49, //A4 + 50, //A5 + 11, //A6 + 12, //A7 + 27, //A8 + 28, //A9 + 34, //A10 + 44, //A11 + 40, //A12 + 13, //A13 + 1, //A14 + 0 //A15 +}; + +#ifdef __cplusplus +} +#endif + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_NUCLEO_F072RB */ diff --git a/variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.h b/variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.h new file mode 100644 index 0000000000..b28571b5fd --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/variant_NUCLEO_F072RB.h @@ -0,0 +1,165 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F072RB) + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ +#define PA3 A15 +#define PA2 A14 +#define PA10 2 +#define PB3 3 +#define PB5 4 +#define PB4 5 +#define PB10 6 +#define PA8 7 +#define PA9 8 +#define PC7 9 +#define PB6 10 +#define PA7 A6 +#define PA6 A7 +#define PA5 A13 +#define PB9 14 +#define PB8 15 +// ST Morpho +// CN7 Left Side +#define PC10 16 +#define PC12 17 +#define PA13 18 // SWD +#define PA14 19 // SWD +#define PA15 20 +#define PB7 21 +#define PC13 22 +#define PC14 23 +#define PC15 24 +#define PF0 25 +#define PF1 26 +#define PC2 A8 +#define PC3 A9 +// CN7 Right Side +#define PC11 29 +#define PD2 30 +// CN10 Left Side +#define PC9 31 +// CN10 Right side +#define PC8 32 +#define PC6 33 +#define PC5 A10 +#define PA12 35 +#define PA11 36 +#define PB12 37 +#define PB11 38 +#define PB2 39 +#define PB1 A12 +#define PB15 41 +#define PB14 42 +#define PB13 43 +#define PC4 A11 +#define PA0 A0 +#define PA1 A1 +#define PA4 A2 +#define PB0 A3 +#define PC1 A4 +#define PC0 A5 + +// Alternate pins number +#define PA1_ALT0 (PA1 | ALT0) +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) +#define PC10_ALT0 (PC10 | ALT0) +#define PC11_ALT0 (PC11 | ALT0) + +#define NUM_DIGITAL_PINS 51 +#define NUM_ALTERNATE_PINS 15 +#define NUM_ANALOG_INPUTS 16 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PA5 +#endif +#define LED_GREEN LED_BUILTIN + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC13 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link +#endif + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_NUCLEO_F072RB */ diff --git a/variants/STM32F0xx/PYBSTICK26_DUINO/variant.cpp b/variants/STM32F0xx/Generic_F072Rx/variant_PYBSTICK26_DUINO.cpp similarity index 61% rename from variants/STM32F0xx/PYBSTICK26_DUINO/variant.cpp rename to variants/STM32F0xx/Generic_F072Rx/variant_PYBSTICK26_DUINO.cpp index bc6ccfd94b..eae39f1bca 100644 --- a/variants/STM32F0xx/PYBSTICK26_DUINO/variant.cpp +++ b/variants/STM32F0xx/Generic_F072Rx/variant_PYBSTICK26_DUINO.cpp @@ -1,32 +1,16 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2020, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_PYBSTICK26_DUINO) #include "pins_arduino.h" @@ -136,3 +120,4 @@ WEAK void SystemClock_Config(void) #ifdef __cplusplus } #endif +#endif /* ARDUINO_PYBSTICK26_DUINO */ diff --git a/variants/STM32F0xx/Generic_F072Rx/variant_PYBSTICK26_DUINO.h b/variants/STM32F0xx/Generic_F072Rx/variant_PYBSTICK26_DUINO.h new file mode 100644 index 0000000000..3800cf34f8 --- /dev/null +++ b/variants/STM32F0xx/Generic_F072Rx/variant_PYBSTICK26_DUINO.h @@ -0,0 +1,167 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_PYBSTICK26_DUINO) + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +#define PB9 0 +#define PB8 1 +#define PB6 2 +#define PA2 A0 +#define PA3 A1 +#define PA0 A2 +#define PB3 6 +#define PB10 7 +#define PB12 8 +#define PB13 9 +#define PB14 10 +#define PA7 A3 +#define PB4 12 +#define PA5 A4 +#define PA10 14 +#define PA15 15 +#define PA4 A5 +#define PC3 A6 +#define PC5 A7 +#define PC6 19 +#define PC7 20 + +#define PA13 21 // LED_RED +#define PA14 22 // LED_GREEN +#define PB0 23 // LED_YELLOW +#define PB1 24 // LED_BLUE + +#define PC13 25 // USR_BTN + +#define PA11 26 // USB D-, CAN_RX +#define PA12 27 // USB D+, CAN_TX + +#define PC14 28 // OSC32_IN +#define PC15 29 // OSC32_OUT +#define PF0 30 // OSC_IN +#define PF1 31 // OSC_OUT + +// Alternate pins number +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) + +#define NUM_DIGITAL_PINS 32 +#define NUM_ALTERNATE_PINS 9 +#define NUM_ANALOG_INPUTS 8 + +// PYBSTICK26 Sx pinout +#define S3 PB9 +#define S5 PB8 +#define S7 PB6 +#define S8 PA2 +#define S10 PA3 +#define S11 PB3 +#define S12 PA0 +#define S13 PB10 +#define S13A PC3 +#define S15 PB12 +#define S15A PC5 +#define S16 PB13 +#define S16A PC6 +#define S18 PB14 +#define S18A PC7 +#define S19 PA7 +#define S21 PAB4 +#define S22 PA10 +#define S23 PA5 +#define S24 PA15 +#define S26 PA4 + +// On-board LED pin number +#define LED_GREEN PA14 +#define LED_RED PA13 +#define LED_YELLOW PB0 +#define LED_BLUE PB1 + +#define LED_BUILTIN LED_RED + +// On-board user buttons +#define USER_BTN PC13 +#define USER_BTN_2 PB6 + +// SPI definitions +#define PIN_SPI_SS PA15 +#define PIN_SPI_SS1 PA15 +#define PIN_SPI_SS2 PA4 +#define PIN_SPI_MOSI PA7 +#define PIN_SPI_MISO PB4 +#define PIN_SPI_SCK PA5 + +// I2C definitions +#define PIN_WIRE_SDA PB9 +#define PIN_WIRE_SCL PB8 + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#define TIMER_TONE TIM6 +#define TIMER_SERVO TIM7 + +// UART Definitions +#define SERIAL_UART_INSTANCE 2 + +// Default pin used for 'Serial' instance +// Mandatory for Firmata +#define PIN_SERIAL_RX PA3 +#define PIN_SERIAL_TX PA2 + +/* Extra HAL definitions */ +#define HAL_DAC_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_USBVIRTUAL SerialUSB + #define SERIAL_PORT_HARDWARE Serial2 + +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_PYBSTICK26_DUINO */ diff --git a/variants/STM32F0xx/Generic_F091Rx/PeripheralPins.c b/variants/STM32F0xx/Generic_F091Rx/PeripheralPins.c new file mode 100644 index 0000000000..e03217693a --- /dev/null +++ b/variants/STM32F0xx/Generic_F091Rx/PeripheralPins.c @@ -0,0 +1,283 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F091R(B-C)Tx.xml + * CubeMX DB release 6.0.10 + */ +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT0, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 + {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 + {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 + {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 + {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 + {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 + {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 + {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 + {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 + {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 + {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 + {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PA_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {PF_0, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PA_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, + {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, + {PF_1, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PA_1_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PA_2_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PA_3_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6_ALT0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PA_7_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PA_7_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 + {PA_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1_ALT0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 + {PB_1_ALT1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 + {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N + {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N + {PB_15_ALT0, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 1, 0)}, // TIM3_CH1 + {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 2, 0)}, // TIM3_CH2 + {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 3, 0)}, // TIM3_CH3 + {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 4, 0)}, // TIM3_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_4, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_3, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PC_0, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)}, + {PC_0_ALT0, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, + {PC_2, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)}, + {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_6, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, + {PC_8, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)}, + {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_10_ALT0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, + {PC_12, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_5, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PB_4, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)}, + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PC_1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)}, + {PC_1_ALT0, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, + {PC_3, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)}, + {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_7, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, + {PC_9, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)}, + {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {PC_11_ALT0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, + {PD_2, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PB_5, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)}, + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, + {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_TD[] = { + {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** diff --git a/variants/STM32F0xx/Generic_F091Rx/PinNamesVar.h b/variants/STM32F0xx/Generic_F091Rx/PinNamesVar.h new file mode 100644 index 0000000000..9c965133ec --- /dev/null +++ b/variants/STM32F0xx/Generic_F091Rx/PinNamesVar.h @@ -0,0 +1,46 @@ +/* Alternate pin name */ +PA_1_ALT0 = PA_1 | ALT0, +PA_2_ALT0 = PA_2 | ALT0, +PA_3_ALT0 = PA_3 | ALT0, +PA_6_ALT0 = PA_6 | ALT0, +PA_7_ALT0 = PA_7 | ALT0, +PA_7_ALT1 = PA_7 | ALT1, +PA_7_ALT2 = PA_7 | ALT2, +PB_0_ALT0 = PB_0 | ALT0, +PB_1_ALT0 = PB_1 | ALT0, +PB_1_ALT1 = PB_1 | ALT1, +PB_14_ALT0 = PB_14 | ALT0, +PB_15_ALT0 = PB_15 | ALT0, +PB_15_ALT1 = PB_15 | ALT1, +PC_0_ALT0 = PC_0 | ALT0, +PC_1_ALT0 = PC_1 | ALT0, +PC_10_ALT0 = PC_10 | ALT0, +PC_11_ALT0 = PC_11 | ALT0, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PC_13, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PE_6, /* manually updated */ +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PA_2, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = PC_5, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = PB_5, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = PB_15, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = PF_2, /* manually updated */ +#endif + +/* No USB */ diff --git a/variants/STM32F0xx/Generic_F091Rx/ldscript.ld b/variants/STM32F0xx/Generic_F091Rx/ldscript.ld new file mode 100644 index 0000000000..73df38fe17 --- /dev/null +++ b/variants/STM32F0xx/Generic_F091Rx/ldscript.ld @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F091Rx Device from STM32F0 series + * 128/256Kbytes FLASH + * 32Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F0xx/Generic_F091Rx/variant.cpp b/variants/STM32F0xx/Generic_F091Rx/variant.cpp new file mode 100644 index 0000000000..c3bd777088 --- /dev/null +++ b/variants/STM32F0xx/Generic_F091Rx/variant.cpp @@ -0,0 +1,187 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_F091RB) || defined(ARDUINO_GENERIC_F091RC) +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, + PA_1, + PA_2, + PA_3, + PA_4, + PA_5, + PA_6, + PA_7, + PA_8, + PA_9, + PA_10, + PA_11, + PA_12, + PA_13, + PA_14, + PA_15, + PB_0, + PB_1, + PB_2, + PB_3, + PB_4, + PB_5, + PB_6, + PB_7, + PB_8, + PB_9, + PB_10, + PB_11, + PB_12, + PB_13, + PB_14, + PB_15, + PC_0, + PC_1, + PC_2, + PC_3, + PC_4, + PC_5, + PC_6, + PC_7, + PC_8, + PC_9, + PC_10, + PC_11, + PC_12, + PC_13, + PC_14, + PC_15, + PD_2, + PF_0, + PF_1, + PF_11 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17, // A9, PB1 + 32, // A10, PC0 + 33, // A11, PC1 + 34, // A12, PC2 + 35, // A13, PC3 + 36, // A14, PC4 + 37 // A15, PC5 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN + } + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI48) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSI48(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + bool ret = false; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + /* Initializes the CPU, AHB and APB buses clocks */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) == HAL_OK) { + ret = true; + } + } + return ret; +} + +WEAK void SystemClock_Config(void) +{ + /* + * HSE_VALUE defined in the stm32f0xx_hal_conf_default.h is used. + * If HSE_VALUE is not the same and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * or + * - Redefine SystemClock_Config() with the correct settings + */ + /* 1- Try to start with HSE and external 8MHz xtal */ + if (SetSysClock_PLL_HSE(false) == false) { + /* 2- If fail try to start with HSE and external clock */ + if (SetSysClock_PLL_HSE(true) == false) { + /* 3- If fail start with HSI48 clock */ + if (SetSysClock_PLL_HSI48() == false) { + Error_Handler(); + } + } + } +} + +#ifdef __cplusplus +} // extern "C" +#endif +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/Generic_F091Rx/variant.h b/variants/STM32F0xx/Generic_F091Rx/variant.h new file mode 100644 index 0000000000..b8ff6a93b8 --- /dev/null +++ b/variants/STM32F0xx/Generic_F091Rx/variant.h @@ -0,0 +1,198 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if !defined(ARDUINO_GENERIC_F091RB) && !defined(ARDUINO_GENERIC_F091RC) +#include "variant_NUCLEO_F091RC.h" +#else +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 A0 +#define PA1 A1 +#define PA2 A2 +#define PA3 A3 +#define PA4 A4 +#define PA5 A5 +#define PA6 A6 +#define PA7 A7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 A8 +#define PB1 A9 +#define PB2 18 +#define PB3 19 +#define PB4 20 +#define PB5 21 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 +#define PC0 A10 +#define PC1 A11 +#define PC2 A12 +#define PC3 A13 +#define PC4 A14 +#define PC5 A15 +#define PC6 38 +#define PC7 39 +#define PC8 40 +#define PC9 41 +#define PC10 42 +#define PC11 43 +#define PC12 44 +#define PC13 45 +#define PC14 46 +#define PC15 47 +#define PD2 48 +#define PF0 49 +#define PF1 50 +#define PF11 51 + +// Alternate pins number +#define PA1_ALT0 (PA1 | ALT0) +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) +#define PC0_ALT0 (PC0 | ALT0) +#define PC1_ALT0 (PC1 | ALT0) +#define PC10_ALT0 (PC10 | ALT0) +#define PC11_ALT0 (PC11 | ALT0) + +#define NUM_DIGITAL_PINS 52 +#define NUM_ALTERNATE_PINS 17 +#define NUM_ANALOG_INPUTS 16 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PA5 +#endif + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC13 +#endif + +// SPI definitions +#ifndef PIN_SPI_SS +#define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_SS1 +#define PIN_SPI_SS1 PA15 +#endif +#ifndef PIN_SPI_SS2 +#define PIN_SPI_SS2 PB4 +#endif +#ifndef PIN_SPI_SS3 +#define PIN_SPI_SS3 PB5 +#endif +#ifndef PIN_SPI_MOSI +#define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO +#define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK +#define PIN_SPI_SCK PA5 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA +#define PIN_WIRE_SDA PA10 +#endif +#ifndef PIN_WIRE_SCL +#define PIN_WIRE_SCL PA9 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 2 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +// Extra HAL modules +#define HAL_DAC_MODULE_ENABLED + +#ifdef __cplusplus +} // extern "C" +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F0xx/NUCLEO_F072RB/variant.cpp b/variants/STM32F0xx/Generic_F091Rx/variant_NUCLEO_F091RC.cpp similarity index 64% rename from variants/STM32F0xx/NUCLEO_F072RB/variant.cpp rename to variants/STM32F0xx/Generic_F091Rx/variant_NUCLEO_F091RC.cpp index 1ef3e41afc..97c33523d8 100644 --- a/variants/STM32F0xx/NUCLEO_F072RB/variant.cpp +++ b/variants/STM32F0xx/Generic_F091Rx/variant_NUCLEO_F091RC.cpp @@ -1,20 +1,16 @@ /* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F091RC) #include "pins_arduino.h" @@ -96,7 +92,11 @@ const uint32_t analogInputPin[] = { 28, //A8 29, //A9 35, //A10 - 45 //A11 + 45, //A11 + 41, //A12 + 13, //A13 + 1, //A14 + 0 //A15 }; #ifdef __cplusplus @@ -116,22 +116,31 @@ extern "C" { */ WEAK void SystemClock_Config(void) { - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; - + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + /* + * Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /* Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } } #ifdef __cplusplus } #endif +#endif /* ARDUINO_NUCLEO_F091RC */ diff --git a/variants/STM32F0xx/Generic_F091Rx/variant_NUCLEO_F091RC.h b/variants/STM32F0xx/Generic_F091Rx/variant_NUCLEO_F091RC.h new file mode 100644 index 0000000000..f01c2b5d99 --- /dev/null +++ b/variants/STM32F0xx/Generic_F091Rx/variant_NUCLEO_F091RC.h @@ -0,0 +1,170 @@ +/* + ******************************************************************************* + * Copyright (c) 2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F091RC) + +#ifndef _VARIANT_ARDUINO_STM32_ +#define _VARIANT_ARDUINO_STM32_ + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +/*---------------------------------------------------------------------------- + * Pins + *----------------------------------------------------------------------------*/ + +#define PA3 A15 +#define PA2 A14 +#define PA10 2 +#define PB3 3 +#define PB5 4 +#define PB4 5 +#define PB10 6 +#define PA8 7 +#define PA9 8 +#define PC7 9 +#define PB6 10 +#define PA7 A6 +#define PA6 A7 +#define PA5 A13 +#define PB9 14 +#define PB8 15 +// ST Morpho +// CN7 Left Side +#define PC10 16 +#define PC12 17 +#define PF11 18 // BOOT0 +#define PA13 19 // SWD +#define PA14 20 // SWD +#define PA15 21 +#define PB7 22 +#define PC13 23 +#define PC14 24 +#define PC15 25 +#define PF0 26 +#define PF1 27 +#define PC2 A8 +#define PC3 A9 +// CN7 Right Side +#define PC11 30 +#define PD2 31 +// CN10 Left Side +#define PC9 32 +// CN10 Right side +#define PC8 33 +#define PC6 34 +#define PC5 A10 +#define PA12 36 +#define PA11 37 +#define PB12 38 +#define PB11 39 +#define PB2 40 +#define PB1 A12 +#define PB15 42 +#define PB14 43 +#define PB13 44 +#define PC4 A11 +#define PA0 A0 +#define PA1 A1 +#define PA4 A2 +#define PB0 A3 +#define PC1 A4 +#define PC0 A5 + +// Alternate pins number +#define PA1_ALT0 (PA1 | ALT0) +#define PA2_ALT0 (PA2 | ALT0) +#define PA3_ALT0 (PA3 | ALT0) +#define PA6_ALT0 (PA6 | ALT0) +#define PA7_ALT0 (PA7 | ALT0) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PB0_ALT0 (PB0 | ALT0) +#define PB1_ALT0 (PB1 | ALT0) +#define PB1_ALT1 (PB1 | ALT1) +#define PB14_ALT0 (PB14 | ALT0) +#define PB15_ALT0 (PB15 | ALT0) +#define PB15_ALT1 (PB15 | ALT1) +#define PC0_ALT0 (PC0 | ALT0) +#define PC1_ALT0 (PC1 | ALT0) +#define PC10_ALT0 (PC10 | ALT0) +#define PC11_ALT0 (PC11 | ALT0) + +#define NUM_DIGITAL_PINS 52 +#define NUM_ALTERNATE_PINS 17 +#define NUM_ANALOG_INPUTS 16 + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PA5 +#endif +#define LED_GREEN LED_BUILTIN + +// On-board user button +#ifndef USER_BTN +#define USER_BTN PC13 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE +#define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO +#define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE +#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link +#endif + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX +#define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX +#define PIN_SERIAL_TX PA2 +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial + #define SERIAL_PORT_HARDWARE Serial +#endif + +#endif /* _VARIANT_ARDUINO_STM32_ */ +#endif /* ARDUINO_NUCLEO_F091RC */ + diff --git a/variants/STM32F0xx/MALYANMx00_F070CB/PeripheralPins.c b/variants/STM32F0xx/MALYANMx00_F070CB/PeripheralPins.c deleted file mode 100644 index 80a0766f44..0000000000 --- a/variants/STM32F0xx/MALYANMx00_F070CB/PeripheralPins.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F070CBTx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {NC, NP, 0} -}; -#endif - -//*** No DAC *** - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N - {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** No CAN *** - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP - {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** diff --git a/variants/STM32F0xx/NUCLEO_F030R8/PeripheralPins.c b/variants/STM32F0xx/NUCLEO_F030R8/PeripheralPins.c deleted file mode 100644 index 81b2b322c6..0000000000 --- a/variants/STM32F0xx/NUCLEO_F030R8/PeripheralPins.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F030R8Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - STLink Tx - // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - STLink Rx - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - // {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - LED - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 - {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 - {NC, NP, 0} -}; -#endif - -//*** No DAC *** - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PF_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PF_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF_NONE)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - STLink Tx - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - STLink Rx - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 1, 0)}, // TIM3_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 2, 0)}, // TIM3_CH2 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_MCO, 4, 0)}, // TIM3_CH4 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // LED - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** No CAN *** - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** diff --git a/variants/STM32F0xx/NUCLEO_F030R8/ldscript.ld b/variants/STM32F0xx/NUCLEO_F030R8/ldscript.ld deleted file mode 100644 index 1b6dd33981..0000000000 --- a/variants/STM32F0xx/NUCLEO_F030R8/ldscript.ld +++ /dev/null @@ -1,186 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F030R8Tx Device with -** 64KByte FLASH, 8KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20002000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x400; /* required amount of heap */ -_Min_Stack_Size = 0x860; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/variants/STM32F0xx/NUCLEO_F030R8/variant.cpp b/variants/STM32F0xx/NUCLEO_F030R8/variant.cpp deleted file mode 100644 index 18b625eba3..0000000000 --- a/variants/STM32F0xx/NUCLEO_F030R8/variant.cpp +++ /dev/null @@ -1,161 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Pin number -const PinName digitalPin[] = { - PA_3, //D0 - PA_2, //D1 - PA_10, //D2 - PB_3, //D3 - no PWM - PB_5, //D4 - PB_4, //D5 - PB_10, //D6 - no PWM - PA_8, //D7 - PA_9, //D8 - PC_7, //D9 - PB_6, //D10 - PA_7, //D11 - PA_6, //D12 - PA_5, //D13 - PB_9, //D14 - PB_8, //D15 - // ST Morpho - // CN7 Left Side - PC_10, //D16 - PC_12, //D17 - PF_6, //D18 - PF_7, //D19 - PA_13, //D20 - SWD - PA_14, //D21 - SWD - PA_15, //D22 - PB_7, //D23 - PC_13, //D24 - PC_14, //D25 - PC_15, //D26 - PF_0, //D27 - PF_1, //D28 - PC_2, //D29 - PC_3, //D30 - // CN7 Right Side - PC_11, //D31 - PD_2, //D32 - // CN10 Left Side - PC_9, //D33 - // CN10 Right side - PC_8, //D34 - PC_6, //D35 - PC_5, //D36 - PA_12, //D37 - PA_11, //D38 - PB_12, //D39 - PB_11, //D40 - PB_2, //D41 - PB_1, //D42 - PB_15, //D43 - PB_14, //D44 - PB_13, //D45 - PC_4, //D46 - PF_5, //D47 - PF_4, //D48 - PA_0, //D49/A0 - PA_1, //D50/A1 - PA_4, //D51/A2 - PB_0, //D52/A3 - PC_1, //D53/A4 - PC_0 //D54/A5 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 49, //A0 - 50, //A1 - 51, //A2 - 52, //A3 - 53, //A4 - 54, //A5 - 11, //A6 - 12, //A7 - 29, //A8 - 30, //A9 - 36, //A10 - 46 //A11 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSI/2) - * SYSCLK(Hz) = 48000000 - * HCLK(Hz) = 48000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 1 - * HSI Frequency(Hz) = 8000000 - * PREDIV = 1 - * PLLMUL = 12 - * Flash Latency(WS) = 1 - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* No HSE Oscillator on Nucleo, Activate PLL with HSI/2 as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = 15; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - /* Initialization Error */ - while (1); - } - - /* Select PLL as system clock source and configure the HCLK, PCLK1 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { - /* Initialization Error */ - while (1); - } -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F0xx/NUCLEO_F030R8/variant.h b/variants/STM32F0xx/NUCLEO_F030R8/variant.h deleted file mode 100644 index 11e056581a..0000000000 --- a/variants/STM32F0xx/NUCLEO_F030R8/variant.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA3 0 -#define PA2 1 -#define PA10 2 -#define PB3 3 // no PWM -#define PB5 4 -#define PB4 5 -#define PB10 6 // no PWM -#define PA8 7 -#define PA9 8 -#define PC7 9 -#define PB6 10 -#define PA7 A6 -#define PA6 A7 -#define PA5 13 -#define PB9 14 -#define PB8 15 -// ST Morpho -// CN7 Left Side -#define PC10 16 -#define PC12 17 -#define PF6 18 -#define PF7 19 -#define PA13 20 // SWD -#define PA14 21 // SWD -#define PA15 22 -#define PB7 23 -#define PC13 24 -#define PC14 25 -#define PC15 26 -#define PF0 27 -#define PF1 28 -#define PC2 A8 -#define PC3 A9 -// CN7 Right Side -#define PC11 31 -#define PD2 32 -// CN10 Left Side -#define PC9 33 -// CN10 Right side -#define PC8 34 -#define PC6 35 -#define PC5 A10 -#define PA12 37 -#define PA11 38 -#define PB12 39 -#define PB11 40 -#define PB2 41 -#define PB1 42 -#define PB15 43 -#define PB14 44 -#define PB13 45 -#define PC4 A11 -#define PF5 47 -#define PF4 48 -#define PA0 A0 -#define PA1 A1 -#define PA4 A2 -#define PB0 A3 -#define PC1 A4 -#define PC0 A5 - -// This must be a literal -#define NUM_DIGITAL_PINS 55 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 12 - -// On-board LED pin number -#define LED_BUILTIN 13 -#define LED_GREEN LED_BUILTIN - -// On-board user button -#define USER_BTN PC13 - -// Timer Definitions -// Use TIM6 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM3 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link -// Default pin used for 'Serial' instance (ex: ST-Link) -// Mandatory for Firmata -#define PIN_SERIAL_RX 0 -#define PIN_SERIAL_TX 1 - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F0xx/NUCLEO_F031K6/PeripheralPins.c b/variants/STM32F0xx/NUCLEO_F031K6/PeripheralPins.c deleted file mode 100644 index 86303d5e89..0000000000 --- a/variants/STM32F0xx/NUCLEO_F031K6/PeripheralPins.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2020, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - * Automatically generated from STM32F031K6Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 // Connected to STLink Tx - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {NC, NP, 0} -}; -#endif - -//*** No DAC *** - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 // Connected to STLink Tx - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 // Connected to STLink Rx - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // Connected to STLink Rx - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - // {PA_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // Connected to SWCLK - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // Connected to STLink Rx - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // Connected to STLink Rx - {NC, NP, 0} -}; -#endif - -//*** No CAN *** - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** - -//*** No SD *** diff --git a/variants/STM32F0xx/NUCLEO_F031K6/variant.cpp b/variants/STM32F0xx/NUCLEO_F031K6/variant.cpp deleted file mode 100644 index d09496694e..0000000000 --- a/variants/STM32F0xx/NUCLEO_F031K6/variant.cpp +++ /dev/null @@ -1,108 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Pin number -const PinName digitalPin[] = { - PA_10, //D0 - PA_9, //D1 - PA_12, //D2 - no PWM - PB_0, //D3 - PB_7, //D4 - PB_6, //D5 - PB_1, //D6 - PF_0, //D7 - no PWM - PF_1, //D8 - no PWM - PA_8, //D9 - PA_11, //D10 - PB_5, //D11 - PB_4, //D12 - PB_3, //D13 - LED - PA_0, //D14/A0 - PA_1, //D15/A1 - PA_3, //D16/A2 - PA_4, //D17/A3 - PA_5, //D18/A4 - PA_6, //D19/A5 - PA_7, //D20/A6 - PA_2, //D21/A7 - STLink Tx - PA_15 //D22 - STLink Rx -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 14, // A0 - 15, // A1 - 16, // A2 - 17, // A3 - 18, // A4 - 19, // A5 - 20, // A6 - 21 // A7 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* No HSE Oscillator on Nucleo, Activate PLL with HSI/2 as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_NONE; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - /* Initialization Error */ - while (1); - } - - /* Select PLL as system clock source and configure the HCLK, PCLK1 clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { - /* Initialization Error */ - while (1); - } -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F0xx/NUCLEO_F031K6/variant.h b/variants/STM32F0xx/NUCLEO_F031K6/variant.h deleted file mode 100644 index 0b16505f31..0000000000 --- a/variants/STM32F0xx/NUCLEO_F031K6/variant.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -// digital -#define PA10 0 -#define PA9 1 -#define PA12 2 // no PWM -#define PB0 3 -#define PB7 4 -#define PB6 5 -#define PB1 6 -#define PF0 7 // no PWM -#define PF1 8 // no PWM -#define PA8 9 -#define PA11 10 -#define PB5 11 -#define PB4 12 -#define PB3 13 // LED -// analog in -#define PA0 A0 -#define PA1 A1 -#define PA3 A2 -#define PA4 A3 -#define PA5 A4 -#define PA6 A5 -#define PA7 A6 -#define PA2 A7 // SB2 ON STLink Tx -#define PA15 22 // STLink Rx - -// This must be a literal -#define NUM_DIGITAL_PINS 23 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 8 - -// On-board LED pin number -#define LED_BUILTIN 13 -#define LED_GREEN LED_BUILTIN - -// I2C Definitions -#define PIN_WIRE_SDA 4 -#define PIN_WIRE_SCL 5 - -// Timer Definitions -#define TIMER_TONE TIM1 -#define TIMER_SERVO TIM3 - -// UART Definitions -#define SERIAL_UART_INSTANCE 1 //Connected to ST-Link -// Default pin used for 'Serial' instance (ex: ST-Link) -// Mandatory for Firmata -#define PIN_SERIAL_RX PA15 -#define PIN_SERIAL_TX PA2 - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F0xx/NUCLEO_F072RB/PeripheralPins.c b/variants/STM32F0xx/NUCLEO_F072RB/PeripheralPins.c deleted file mode 100644 index 3961956d10..0000000000 --- a/variants/STM32F0xx/NUCLEO_F072RB/PeripheralPins.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2020, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - * Automatically generated from STM32F072R(8-B)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2- D1 - STLink Tx - // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3- D0 - STLink Rx - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - // {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - D13 (LED1) - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - NC - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 - {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N - // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - // {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - // {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 1, 0)}, // TIM3_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 2, 0)}, // TIM3_CH2 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 3, 0)}, // TIM3_CH3 - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 4, 0)}, // TIM3_CH4 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - // {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // SWCLK - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_10, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - // {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_11, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP - {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** - -//*** No SD *** diff --git a/variants/STM32F0xx/NUCLEO_F072RB/PinNamesVar.h b/variants/STM32F0xx/NUCLEO_F072RB/PinNamesVar.h deleted file mode 100644 index 52526fe78b..0000000000 --- a/variants/STM32F0xx/NUCLEO_F072RB/PinNamesVar.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = PE_6, /* Manually updated */ -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = PA_2, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = PC_5, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = PB_5, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = PB_15, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = PF_2, /* Manually updated */ -#endif -/* USB */ -#ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, - USB_NOE = PA_13, -#endif diff --git a/variants/STM32F0xx/NUCLEO_F072RB/ldscript.ld b/variants/STM32F0xx/NUCLEO_F072RB/ldscript.ld deleted file mode 100644 index 44015746d5..0000000000 --- a/variants/STM32F0xx/NUCLEO_F072RB/ldscript.ld +++ /dev/null @@ -1,188 +0,0 @@ -/* -***************************************************************************** -** - -** File : ldscript.ld -** -** Abstract : Linker script for STM32F072RB Device with -** 128KByte FLASH, 16KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(4); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/variants/STM32F0xx/NUCLEO_F072RB/variant.h b/variants/STM32F0xx/NUCLEO_F072RB/variant.h deleted file mode 100644 index dcca0ce18f..0000000000 --- a/variants/STM32F0xx/NUCLEO_F072RB/variant.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA3 0 -#define PA2 1 -#define PA10 2 -#define PB3 3 -#define PB5 4 -#define PB4 5 -#define PB10 6 -#define PA8 7 -#define PA9 8 -#define PC7 9 -#define PB6 10 -#define PA7 A6 -#define PA6 A7 -#define PA5 13 -#define PB9 14 -#define PB8 15 -// ST Morpho -// CN7 Left Side -#define PC10 16 -#define PC12 17 -#define PF11 18 // BOOT0 -#define PA13 19 // SWD -#define PA14 20 // SWD -#define PA15 21 -#define PB7 22 -#define PC13 23 -#define PC14 24 -#define PC15 25 -#define PF0 26 -#define PF1 27 -#define PC2 A8 -#define PC3 A9 -// CN7 Right Side -#define PC11 30 -#define PD2 31 -// CN10 Left Side -#define PC9 32 -// CN10 Right side -#define PC8 33 -#define PC6 34 -#define PC5 A10 -#define PA12 36 -#define PA11 37 -#define PB12 38 -#define PB11 39 -#define PB2 40 -#define PB1 41 -#define PB15 42 -#define PB14 43 -#define PB13 44 -#define PC4 A11 -#define PA0 A0 -#define PA1 A1 -#define PA4 A2 -#define PB0 A3 -#define PC1 A4 -#define PC0 A5 - -// This must be a literal -#define NUM_DIGITAL_PINS 52 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 12 - -// On-board LED pin number -#define LED_BUILTIN 13 -#define LED_GREEN LED_BUILTIN - -// On-board user button -#define USER_BTN PC13 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM7 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link - -// Default pin used for 'Serial' instance (ex: ST-Link) -// Mandatory for Firmata -#define PIN_SERIAL_RX 0 -#define PIN_SERIAL_TX 1 - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F0xx/NUCLEO_F091RC/PeripheralPins.c b/variants/STM32F0xx/NUCLEO_F091RC/PeripheralPins.c deleted file mode 100644 index 7ee46299af..0000000000 --- a/variants/STM32F0xx/NUCLEO_F091RC/PeripheralPins.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F091R(B-C)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - A0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - A1 - // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - D1 - STLink Tx - // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - D0 - STLink Rx - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - A2 - // {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - D13 (LED1) - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - D12 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - D11 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - A3 - // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 - A5 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 - A4 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 - {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - A2 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - D13 (LED1) - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // D2 - {PA_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // D14 - {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - // {PF_0, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_IN - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // D8 - {PA_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // D10 - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // D15 - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, // D6 - {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - // {PF_1, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, // OSC_OUT - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - A0 - // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - A1 - {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N - A1 - // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - D1 - STLink Tx - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - D1 - STLink Tx - // {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - D0 - STLink Rx - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - D0 - STLink Rx - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - A2 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - D13 (LED1) - // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - D12 - {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - D12 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - D11 - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - D11 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - D11 - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - D11 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - D7 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - D8 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - A3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - D5 - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - D4 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - D10 - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - D15 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - D14 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - D6 - // {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 1, 0)}, // TIM3_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 2, 0)}, // TIM3_CH2 - D9 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 3, 0)}, // TIM3_CH3 - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 4, 0)}, // TIM3_CH4 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, // A0 - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // D1 - {PA_4, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)}, // A2 - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // D8 - // {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // SWCLK - {PB_3, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)}, // D3 - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, // D10 - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, // D6 - // {PC_0, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)}, // A5 - {PC_0, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, // A5 - {PC_2, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)}, - {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_6, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, - {PC_8, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)}, - // {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_10, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {PC_12, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, // A1 - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // D0 - {PA_5, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_USART6)}, // D13 (LED1) - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, // D2 - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_4, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)}, // D5 - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PC_1, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART6)}, // A4 - // {PC_1, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, - {PC_3, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART8)}, - {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_7, USART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART7)}, // D9 - {PC_9, USART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART8)}, - // {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_11, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {PD_2, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USART5)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // A1 - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PB_5, USART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART5)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, // A0 - {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, // D12 - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // D11 - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // D4 - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // D12 - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // D5 - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // D13 (LED1) - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // D3 - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // D6 - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, // A2 - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // D14 - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, // D15 - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, // D14 - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** diff --git a/variants/STM32F0xx/NUCLEO_F091RC/PinNamesVar.h b/variants/STM32F0xx/NUCLEO_F091RC/PinNamesVar.h deleted file mode 100644 index 5692940c74..0000000000 --- a/variants/STM32F0xx/NUCLEO_F091RC/PinNamesVar.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = PE_6, /* manually updated */ -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = PA_2, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = PC_5, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = PB_5, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = PB_15, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = PF_2, /* manually updated */ -#endif diff --git a/variants/STM32F0xx/NUCLEO_F091RC/ldscript.ld b/variants/STM32F0xx/NUCLEO_F091RC/ldscript.ld deleted file mode 100644 index cb7cb07344..0000000000 --- a/variants/STM32F0xx/NUCLEO_F091RC/ldscript.ld +++ /dev/null @@ -1,180 +0,0 @@ -/** - ****************************************************************************** - * @file STM32F091RC_FLASH.h - * @author WI6LABS - * @version V1.0.0 - * @date 11-July-2016 - * @brief Linker script for STM32F091RC Device with - * 256KByte FLASH, 32KByte RAM - * - * Set heap size, stack size and stack location according - * to application requirements. - * - * Set memory bank area and size if external memory is used. - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20008000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200;; /* required amount of heap */ -_Min_Stack_Size = 0x400;; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata ALIGN(4) : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(4); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/variants/STM32F0xx/NUCLEO_F091RC/variant.cpp b/variants/STM32F0xx/NUCLEO_F091RC/variant.cpp deleted file mode 100644 index 1ef3e41afc..0000000000 --- a/variants/STM32F0xx/NUCLEO_F091RC/variant.cpp +++ /dev/null @@ -1,137 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Pin number -const PinName digitalPin[] = { - PA_3, //D0 - PA_2, //D1 - PA_10, //D2 - PB_3, //D3 - PB_5, //D4 - PB_4, //D5 - PB_10, //D6 - PA_8, //D7 - PA_9, //D8 - PC_7, //D9 - PB_6, //D10 - PA_7, //D11 - PA_6, //D12 - PA_5, //D13 - PB_9, //D14 - PB_8, //D15 - // ST Morpho - // CN7 Left Side - PC_10, //D16 - PC_12, //D17 - PF_11, //D18 - BOOT0 - PA_13, //D19 - SWD - PA_14, //D20 - SWD - PA_15, //D21 - PB_7, //D22 - PC_13, //D23 - PC_14, //D24 - PC_15, //D25 - PF_0, //D26 - PF_1, //D27 - PC_2, //D28 - PC_3, //D29 - // CN7 Right Side - PC_11, //D30 - PD_2, //D31 - // CN10 Left Side - PC_9, //D32 - // CN10 Right side - PC_8, //D33 - PC_6, //D34 - PC_5, //D35 - PA_12, //D36 - PA_11, //D37 - PB_12, //D38 - PB_11, //D39 - PB_2, //D40 - PB_1, //D41 - PB_15, //D42 - PB_14, //D43 - PB_13, //D44 - PC_4, //D45 - PA_0, //D46/A0 - PA_1, //D47/A1 - PA_4, //D48/A2 - PB_0, //D49/A3 - PC_1, //D50/A4 - PC_0 //D51/A5 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 46, //A0 - 47, //A1 - 48, //A2 - 49, //A3 - 50, //A4 - 51, //A5 - 11, //A6 - 12, //A7 - 28, //A8 - 29, //A9 - 35, //A10 - 45 //A11 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; - - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK - | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI48; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F0xx/NUCLEO_F091RC/variant.h b/variants/STM32F0xx/NUCLEO_F091RC/variant.h deleted file mode 100644 index dcca0ce18f..0000000000 --- a/variants/STM32F0xx/NUCLEO_F091RC/variant.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA3 0 -#define PA2 1 -#define PA10 2 -#define PB3 3 -#define PB5 4 -#define PB4 5 -#define PB10 6 -#define PA8 7 -#define PA9 8 -#define PC7 9 -#define PB6 10 -#define PA7 A6 -#define PA6 A7 -#define PA5 13 -#define PB9 14 -#define PB8 15 -// ST Morpho -// CN7 Left Side -#define PC10 16 -#define PC12 17 -#define PF11 18 // BOOT0 -#define PA13 19 // SWD -#define PA14 20 // SWD -#define PA15 21 -#define PB7 22 -#define PC13 23 -#define PC14 24 -#define PC15 25 -#define PF0 26 -#define PF1 27 -#define PC2 A8 -#define PC3 A9 -// CN7 Right Side -#define PC11 30 -#define PD2 31 -// CN10 Left Side -#define PC9 32 -// CN10 Right side -#define PC8 33 -#define PC6 34 -#define PC5 A10 -#define PA12 36 -#define PA11 37 -#define PB12 38 -#define PB11 39 -#define PB2 40 -#define PB1 41 -#define PB15 42 -#define PB14 43 -#define PB13 44 -#define PC4 A11 -#define PA0 A0 -#define PA1 A1 -#define PA4 A2 -#define PB0 A3 -#define PC1 A4 -#define PC0 A5 - -// This must be a literal -#define NUM_DIGITAL_PINS 52 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 12 - -// On-board LED pin number -#define LED_BUILTIN 13 -#define LED_GREEN LED_BUILTIN - -// On-board user button -#define USER_BTN PC13 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM7 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link - -// Default pin used for 'Serial' instance (ex: ST-Link) -// Mandatory for Firmata -#define PIN_SERIAL_RX 0 -#define PIN_SERIAL_TX 1 - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F0xx/PYBSTICK26_DUINO/PeripheralPins.c b/variants/STM32F0xx/PYBSTICK26_DUINO/PeripheralPins.c deleted file mode 100644 index 7337076e0a..0000000000 --- a/variants/STM32F0xx/PYBSTICK26_DUINO/PeripheralPins.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2020, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - * Automatically generated from STM32F072R(8-B)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - // {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - // {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - // {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - // {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 - // {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11 - // {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC_IN12 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC_IN13 - // {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC_IN14 - {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC_IN15 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - // {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - // {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C2)}, - {PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - // {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM15, 1, 1)}, // TIM15_CH1N - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - // {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - // {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - // {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM15, 1, 1)}, // TIM15_CH1N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 1, 0)}, // TIM3_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 2, 0)}, // TIM3_CH2 - // {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 3, 0)}, // TIM3_CH3 - // {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM3, 4, 0)}, // TIM3_CH4 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_0, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - // {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - // {PC_4, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - // {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - // {PC_10, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - // {PA_1, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - // {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - // {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {PC_11, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART4)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - // {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - // {PB_1, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - // {PD_2, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PA_6, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - // {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - // {PB_7, USART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART4)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - // {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - // {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - // {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - // {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF4_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP - // {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_USB)}, // USB_NOE - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** - -//*** No SD *** diff --git a/variants/STM32F0xx/PYBSTICK26_DUINO/PinNamesVar.h b/variants/STM32F0xx/PYBSTICK26_DUINO/PinNamesVar.h deleted file mode 100644 index 85988c06ef..0000000000 --- a/variants/STM32F0xx/PYBSTICK26_DUINO/PinNamesVar.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = PE_6, /* Manually updated */ -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = PA_2, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = PC_5, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = PB_5, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = PB_15, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = PF_2, /* Manually updated */ -#endif -/* USB */ -#ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, - // USB_NOE = PA_13, -#endif diff --git a/variants/STM32F0xx/PYBSTICK26_DUINO/variant.h b/variants/STM32F0xx/PYBSTICK26_DUINO/variant.h deleted file mode 100644 index b270e7a6e1..0000000000 --- a/variants/STM32F0xx/PYBSTICK26_DUINO/variant.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -#define PB9 0 -#define PB8 1 -#define PB6 2 -#define PA2 A0 -#define PA3 A1 -#define PA0 A2 -#define PB3 6 -#define PB10 7 -#define PB12 8 -#define PB13 9 -#define PB14 10 -#define PA7 A3 -#define PB4 12 -#define PA5 A4 -#define PA10 14 -#define PA15 15 -#define PA4 A5 -#define PC3 A6 -#define PC5 A7 -#define PC6 19 -#define PC7 20 - -#define PA13 21 // LED_RED -#define PA14 22 // LED_GREEN -#define PB0 23 // LED_YELLOW -#define PB1 24 // LED_BLUE - -#define PC13 25 // USR_BTN - -#define PA11 26 // USB D-, CAN_RX -#define PA12 27 // USB D+, CAN_TX - -#define PC14 28 // OSC32_IN -#define PC15 29 // OSC32_OUT -#define PF0 30 // OSC_IN -#define PF1 31 // OSC_OUT - -// This must be a literal -#define NUM_DIGITAL_PINS 32 -#define NUM_ANALOG_INPUTS 8 - -// PYBSTICK26 Sx pinout -#define S3 PB9 -#define S5 PB8 -#define S7 PB6 -#define S8 PA2 -#define S10 PA3 -#define S11 PB3 -#define S12 PA0 -#define S13 PB10 -#define S13A PC3 -#define S15 PB12 -#define S15A PC5 -#define S16 PB13 -#define S16A PC6 -#define S18 PB14 -#define S18A PC7 -#define S19 PA7 -#define S21 PAB4 -#define S22 PA10 -#define S23 PA5 -#define S24 PA15 -#define S26 PA4 - -// On-board LED pin number -#define LED_GREEN PA14 -#define LED_RED PA13 -#define LED_YELLOW PB0 -#define LED_BLUE PB1 - -#define LED_BUILTIN LED_RED - -// On-board user buttons -#define USER_BTN PC13 -#define USER_BTN_2 PB6 - -// SPI definitions -#define PIN_SPI_SS PA15 -#define PIN_SPI_SS1 PA15 -#define PIN_SPI_SS2 PA4 -#define PIN_SPI_MOSI PA7 -#define PIN_SPI_MISO PB4 -#define PIN_SPI_SCK PA5 - -// I2C definitions -#define PIN_WIRE_SDA PB9 -#define PIN_WIRE_SCL PB8 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM7 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 - -// Default pin used for 'Serial' instance -// Mandatory for Firmata -#define PIN_SERIAL_RX PA3 -#define PIN_SERIAL_TX PA2 - -/* Extra HAL definitions */ -#define HAL_DAC_MODULE_ENABLED - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_USBVIRTUAL SerialUSB - #define SERIAL_PORT_HARDWARE Serial2 - -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F0xx/WRAITH32_F051K6/PeripheralPins.c b/variants/STM32F0xx/WRAITH32_F051K6/PeripheralPins.c deleted file mode 100644 index 1f5cd53b13..0000000000 --- a/variants/STM32F0xx/WRAITH32_F051K6/PeripheralPins.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ******************************************************************************* - * Automatically generated from STM32F051K6Ux.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1 - // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - RC Input - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - // {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - // {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4 - {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 1)}, // TIM1_CH1N - C_FET_LO - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - C_FET_LO - // {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1 - C_FET_LO - // {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM17, 1, 0)}, // TIM17_CH1 - C_FET_LO - // {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - B_FET_HI - // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - A_FET_LO - // {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - A_FET_HI - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1 - LED_RED - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 1)}, // TIM1_CH2N - C_FET_HI - // {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3 - C_FET_HI - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 1)}, // TIM1_CH3N - B_FET_LO - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4 - B_FET_LO - // {PB_1, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM14, 1, 0)}, // TIM14_CH1 - B_FET_LO - // {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2 - LED_GREEN - // {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1 - LED_BLUE - {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - // {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - // {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - // {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - // {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, - {NC, NP, 0} -}; -#endif - -//*** No CAN *** - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** - -//*** No SD *** \ No newline at end of file diff --git a/variants/STM32F0xx/WRAITH32_F051K6/variant.cpp b/variants/STM32F0xx/WRAITH32_F051K6/variant.cpp deleted file mode 100644 index a8c60df59a..0000000000 --- a/variants/STM32F0xx/WRAITH32_F051K6/variant.cpp +++ /dev/null @@ -1,106 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Pin number -const PinName digitalPin[] = { - PA_10, //D0 - PA_9, //D1 - PA_12, //D2 - PB_0, //D3 - PB_7, //D4 - PB_6, //D5 - PB_1, //D6 - PF_0, //D7 - PF_1, //D8 - PA_8, //D9 - PA_11, //D10 - PB_5, //D11 - PB_4, //D12 - PB_3, //D13 - PA_0, //D14/A0 - PA_1, //D15/A1 - PA_3, //D16/A2 - PA_4, //D17/A3 - PA_5, //D18/A4 - PA_6, //D19/A5 - PA_7, //D20/A6 - PA_2, //D21 - PA_15 //D22 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 14, // A0 - 15, // A1 - 16, // A2 - 17, // A3 - 18, // A4 - 19, // A5 - 20 // A6 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; - - // Initializes the CPU, AHB and APB busses clocks - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI14 | RCC_OSCILLATORTYPE_LSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSI14State = RCC_HSI14_ON; - RCC_OscInitStruct.HSICalibrationValue = 16; - RCC_OscInitStruct.HSI14CalibrationValue = 16; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - while (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK); - - // Initializes the CPU, AHB and APB busses clocks - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - while (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK); -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F0xx/WRAITH32_F051K6/variant.h b/variants/STM32F0xx/WRAITH32_F051K6/variant.h deleted file mode 100644 index 0f4d5db00c..0000000000 --- a/variants/STM32F0xx/WRAITH32_F051K6/variant.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA10 0 -#define PA9 1 -#define PA12 2 -#define PB0 3 -#define PB7 4 // RX, SDA -#define PB6 5 // TX, SCL -#define PB1 6 -#define PF0 7 -#define PF1 8 -#define PA8 9 -#define PA11 10 -#define PB5 11 -#define PB4 12 // LED_BLUE -#define PB3 13 // LED_GREEN -#define PA0 A0 -#define PA1 A1 -#define PA3 A2 -#define PA4 A3 -#define PA5 A4 -#define PA6 A5 -#define PA7 A6 -#define PA2 21 // RC Input -#define PA15 22 // LED_RED - -// This must be a literal -#define NUM_DIGITAL_PINS 23 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 7 - -// On-board LED pin number -#define LED_GREEN PB3 -#define LED_BLUE PB4 -#define LED_RED PA15 -#define LED_BUILTIN LED_GREEN - - -// On-board user button -//#define USER_BTN NC - -// I2C Definitions -#define PIN_WIRE_SDA PB7 // 4 -#define PIN_WIRE_SCL PB6 // 5 - -// Timer Definitions -#define TIMER_SERVO TIM6 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link - -// Serial Pin Firmata -#define PIN_SERIAL_RX PB7 // 4 -#define PIN_SERIAL_TX PB6 // 5 - -/* Extra HAL modules */ -#define HAL_DAC_MODULE_ENABLED - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32G0xx/Generic_G030Kx/variant_AURORA_ONE.h b/variants/STM32G0xx/Generic_G030Kx/variant_AURORA_ONE.h index 4db53ac5d5..b71ecee246 100644 --- a/variants/STM32G0xx/Generic_G030Kx/variant_AURORA_ONE.h +++ b/variants/STM32G0xx/Generic_G030Kx/variant_AURORA_ONE.h @@ -69,9 +69,16 @@ extern "C" { #define NUM_ANALOG_INPUTS 16 // On-board LED pin number +#ifndef LED_BUILTIN #define LED_BUILTIN PB3 +#endif #define LED_GREEN LED_BUILTIN +// On-board user button +#ifndef USER_BTN +#define USER_BTN PA8 +#endif + // Timer Definitions // Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin #ifndef TIMER_TONE @@ -82,12 +89,18 @@ extern "C" { #endif // UART Definitions +#ifndef SERIAL_UART_INSTANCE #define SERIAL_UART_INSTANCE 2 //Connected to Aurora Connect Lite +#endif // Default pin used for 'Serial' instance (ex: ST-Link) // Mandatory for Firmata +#ifndef PIN_SERIAL_RX #define PIN_SERIAL_RX PA10 +#endif +#ifndef PIN_SERIAL_TX #define PIN_SERIAL_TX PA9 +#endif #ifdef __cplusplus } // extern "C"