From d856a72c71c21dbaaf17995714a84cf468c34e3b Mon Sep 17 00:00:00 2001 From: Alexandre Bourdiol Date: Tue, 23 Mar 2021 18:15:43 +0100 Subject: [PATCH] [variant] Add Generic F3xx Signed-off-by: Alexandre Bourdiol --- README.md | 5 + boards.txt | 101 +++++- .../STM32F3xx/F302R(6-8)T/generic_clock.c | 67 +++- variants/STM32F3xx/F302R(6-8)T/ldscript.ld | 177 +++++++++ .../variant_NUCLEO_F302R8.cpp | 92 +++-- .../F302R(6-8)T/variant_NUCLEO_F302R8.h | 157 ++++++++ .../PeripheralPins_SPARKY_F303CC.c | 286 +++++++++++++++ .../STM32F3xx/F303C(B-C)T/generic_clock.c | 67 +++- variants/STM32F3xx/F303C(B-C)T/ldscript.ld | 179 +++++++++ .../variant_BLACKPILL_F303CC.cpp} | 56 ++- .../F303C(B-C)T/variant_BLACKPILL_F303CC.h | 186 ++++++++++ .../variant_SPARKY_F303CC.cpp | 69 ++-- .../F303C(B-C)T/variant_SPARKY_F303CC.h | 184 ++++++++++ .../F303K(6-8)T_F334K(4-6-8)T/generic_clock.c | 67 +++- .../F303K(6-8)T_F334K(4-6-8)T/ldscript.ld | 179 +++++++++ .../variant_NUCLEO_F303K8.cpp | 49 +-- .../variant_NUCLEO_F303K8.h | 136 +++++++ .../STM32F3xx/F303R(D-E)T/generic_clock.c | 37 +- variants/STM32F3xx/F303R(D-E)T/ldscript.ld | 179 +++++++++ .../F303R(D-E)T/variant_NUCLEO_F303RE.cpp | 156 ++++++++ .../F303R(D-E)T/variant_NUCLEO_F303RE.h | 193 ++++++++++ .../STM32F3xx/NUCLEO_F302R8/PeripheralPins.c | 279 -------------- .../STM32F3xx/NUCLEO_F302R8/PinNamesVar.h | 30 -- variants/STM32F3xx/NUCLEO_F302R8/ldscript.ld | 188 ---------- .../NUCLEO_F302R8/variant_NUCLEO_F302R8.h | 143 -------- .../STM32F3xx/NUCLEO_F303K8/PeripheralPins.c | 227 ------------ .../STM32F3xx/NUCLEO_F303K8/PinNamesVar.h | 25 -- variants/STM32F3xx/NUCLEO_F303K8/ldscript.ld | 208 ----------- .../NUCLEO_F303K8/variant_NUCLEO_F303K8.h | 112 ------ .../STM32F3xx/NUCLEO_F303RE/PeripheralPins.c | 341 ------------------ .../STM32F3xx/NUCLEO_F303RE/PinNamesVar.h | 30 -- variants/STM32F3xx/NUCLEO_F303RE/ldscript.ld | 180 --------- .../NUCLEO_F303RE/variant_NUCLEO_F303RE.cpp | 144 -------- .../NUCLEO_F303RE/variant_NUCLEO_F303RE.h | 143 -------- .../STM32F3xx/PILL_F303XX/PeripheralPins.c | 294 --------------- variants/STM32F3xx/PILL_F303XX/PinNamesVar.h | 30 -- variants/STM32F3xx/PILL_F303XX/ldscript.ld | 208 ----------- .../PILL_F303XX/variant_PILL_F303XX.h | 143 -------- .../STM32F3xx/SPARKY_F303CC/PeripheralPins.c | 294 --------------- .../STM32F3xx/SPARKY_F303CC/PinNamesVar.h | 30 -- variants/STM32F3xx/SPARKY_F303CC/ldscript.ld | 208 ----------- .../SPARKY_F303CC/variant_SPARKY_F303CC.h | 144 -------- 42 files changed, 2452 insertions(+), 3571 deletions(-) create mode 100644 variants/STM32F3xx/F302R(6-8)T/ldscript.ld rename variants/STM32F3xx/{NUCLEO_F302R8 => F302R(6-8)T}/variant_NUCLEO_F302R8.cpp (51%) create mode 100644 variants/STM32F3xx/F302R(6-8)T/variant_NUCLEO_F302R8.h create mode 100644 variants/STM32F3xx/F303C(B-C)T/PeripheralPins_SPARKY_F303CC.c create mode 100644 variants/STM32F3xx/F303C(B-C)T/ldscript.ld rename variants/STM32F3xx/{PILL_F303XX/variant_PILL_F303XX.cpp => F303C(B-C)T/variant_BLACKPILL_F303CC.cpp} (59%) create mode 100644 variants/STM32F3xx/F303C(B-C)T/variant_BLACKPILL_F303CC.h rename variants/STM32F3xx/{SPARKY_F303CC => F303C(B-C)T}/variant_SPARKY_F303CC.cpp (58%) create mode 100644 variants/STM32F3xx/F303C(B-C)T/variant_SPARKY_F303CC.h create mode 100644 variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/ldscript.ld rename variants/STM32F3xx/{NUCLEO_F303K8 => F303K(6-8)T_F334K(4-6-8)T}/variant_NUCLEO_F303K8.cpp (70%) create mode 100644 variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/variant_NUCLEO_F303K8.h create mode 100644 variants/STM32F3xx/F303R(D-E)T/ldscript.ld create mode 100644 variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.cpp create mode 100644 variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.h delete mode 100644 variants/STM32F3xx/NUCLEO_F302R8/PeripheralPins.c delete mode 100644 variants/STM32F3xx/NUCLEO_F302R8/PinNamesVar.h delete mode 100644 variants/STM32F3xx/NUCLEO_F302R8/ldscript.ld delete mode 100644 variants/STM32F3xx/NUCLEO_F302R8/variant_NUCLEO_F302R8.h delete mode 100644 variants/STM32F3xx/NUCLEO_F303K8/PeripheralPins.c delete mode 100644 variants/STM32F3xx/NUCLEO_F303K8/PinNamesVar.h delete mode 100644 variants/STM32F3xx/NUCLEO_F303K8/ldscript.ld delete mode 100644 variants/STM32F3xx/NUCLEO_F303K8/variant_NUCLEO_F303K8.h delete mode 100644 variants/STM32F3xx/NUCLEO_F303RE/PeripheralPins.c delete mode 100644 variants/STM32F3xx/NUCLEO_F303RE/PinNamesVar.h delete mode 100644 variants/STM32F3xx/NUCLEO_F303RE/ldscript.ld delete mode 100644 variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.cpp delete mode 100644 variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.h delete mode 100644 variants/STM32F3xx/PILL_F303XX/PeripheralPins.c delete mode 100644 variants/STM32F3xx/PILL_F303XX/PinNamesVar.h delete mode 100644 variants/STM32F3xx/PILL_F303XX/ldscript.ld delete mode 100644 variants/STM32F3xx/PILL_F303XX/variant_PILL_F303XX.h delete mode 100644 variants/STM32F3xx/SPARKY_F303CC/PeripheralPins.c delete mode 100644 variants/STM32F3xx/SPARKY_F303CC/PinNamesVar.h delete mode 100644 variants/STM32F3xx/SPARKY_F303CC/ldscript.ld delete mode 100644 variants/STM32F3xx/SPARKY_F303CC/variant_SPARKY_F303CC.h diff --git a/README.md b/README.md index 9a31e3ca7a..ce7fd49e26 100644 --- a/README.md +++ b/README.md @@ -200,7 +200,12 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | Status | Device(s) | Name | Release | Notes | | :----: | :-------: | ---- | :-----: | :---- | +| :yellow_heart: | STM32F302R6
STM32F302R8 | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F303CB
STM32F303CC | Generic Board | **2.0.0** | | | :green_heart: | STM32F303CC | [RobotDyn Black Pill](https://stm32-base.org/boards/STM32F303CCT6-RobotDyn-Black-Pill) | *1.6.1* | [More info](https://robotdyn.com/catalog/development-boards/stm-boards-and-shields.html) | +| :yellow_heart: | STM32F303K6
STM32F303K8 | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F303RD
STM32F303RE | Generic Board | **2.0.0** | | +| :yellow_heart: | STM32F334K4
STM32F334K6
STM32F334K8 | Generic Board | **2.0.0** | | ### Generic STM32F4 boards diff --git a/boards.txt b/boards.txt index 937f245bc2..221cff4888 100644 --- a/boards.txt +++ b/boards.txt @@ -279,7 +279,7 @@ Nucleo_64.menu.pnum.NUCLEO_F302R8.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=h Nucleo_64.menu.pnum.NUCLEO_F302R8.build.board=NUCLEO_F302R8 Nucleo_64.menu.pnum.NUCLEO_F302R8.build.series=STM32F3xx Nucleo_64.menu.pnum.NUCLEO_F302R8.build.product_line=STM32F302x8 -Nucleo_64.menu.pnum.NUCLEO_F302R8.build.variant=STM32F3xx/NUCLEO_F302R8 +Nucleo_64.menu.pnum.NUCLEO_F302R8.build.variant=STM32F3xx/F302R(6-8)T Nucleo_64.menu.pnum.NUCLEO_F302R8.build.cmsis_lib_gcc=arm_cortexM4lf_math # NUCLEO_F303RE board @@ -292,7 +292,7 @@ Nucleo_64.menu.pnum.NUCLEO_F303RE.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=h Nucleo_64.menu.pnum.NUCLEO_F303RE.build.board=NUCLEO_F303RE Nucleo_64.menu.pnum.NUCLEO_F303RE.build.series=STM32F3xx Nucleo_64.menu.pnum.NUCLEO_F303RE.build.product_line=STM32F303xE -Nucleo_64.menu.pnum.NUCLEO_F303RE.build.variant=STM32F3xx/NUCLEO_F303RE +Nucleo_64.menu.pnum.NUCLEO_F303RE.build.variant=STM32F3xx/F303R(D-E)T Nucleo_64.menu.pnum.NUCLEO_F303RE.build.cmsis_lib_gcc=arm_cortexM4lf_math # NUCLEO_F401RE board @@ -530,7 +530,7 @@ Nucleo_32.menu.pnum.NUCLEO_F303K8.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=h Nucleo_32.menu.pnum.NUCLEO_F303K8.build.board=NUCLEO_F303K8 Nucleo_32.menu.pnum.NUCLEO_F303K8.build.series=STM32F3xx Nucleo_32.menu.pnum.NUCLEO_F303K8.build.product_line=STM32F303x8 -Nucleo_32.menu.pnum.NUCLEO_F303K8.build.variant=STM32F3xx/NUCLEO_F303K8 +Nucleo_32.menu.pnum.NUCLEO_F303K8.build.variant=STM32F3xx/F303K(6-8)T_F334K(4-6-8)T Nucleo_32.menu.pnum.NUCLEO_F303K8.build.cmsis_lib_gcc=arm_cortexM4lf_math # NUCLEO_G031K8 board @@ -1549,8 +1549,96 @@ GenF3.menu.pnum.BLACKPILL_F303CC.upload.maximum_size=262144 GenF3.menu.pnum.BLACKPILL_F303CC.upload.maximum_data_size=40960 GenF3.menu.pnum.BLACKPILL_F303CC.build.board=BLACKPILL_F303CC GenF3.menu.pnum.BLACKPILL_F303CC.build.product_line=STM32F303xC -GenF3.menu.pnum.BLACKPILL_F303CC.build.variant_h=variant_PILL_F303XX.h -GenF3.menu.pnum.BLACKPILL_F303CC.build.variant=STM32F3xx/PILL_F303XX +GenF3.menu.pnum.BLACKPILL_F303CC.build.variant_h=variant_{build.board}.h +GenF3.menu.pnum.BLACKPILL_F303CC.build.variant=STM32F3xx/F303C(B-C)T + +# Generic F302R6Tx +GenF3.menu.pnum.GENERIC_F302R6TX=Generic F302R6Tx +GenF3.menu.pnum.GENERIC_F302R6TX.upload.maximum_size=32768 +GenF3.menu.pnum.GENERIC_F302R6TX.upload.maximum_data_size=16384 +GenF3.menu.pnum.GENERIC_F302R6TX.build.board=GENERIC_F302R6TX +GenF3.menu.pnum.GENERIC_F302R6TX.build.product_line=STM32F302x8 +GenF3.menu.pnum.GENERIC_F302R6TX.build.variant=STM32F3xx/F302R(6-8)T + +# Generic F302R8Tx +GenF3.menu.pnum.GENERIC_F302R8TX=Generic F302R8Tx +GenF3.menu.pnum.GENERIC_F302R8TX.upload.maximum_size=65536 +GenF3.menu.pnum.GENERIC_F302R8TX.upload.maximum_data_size=16384 +GenF3.menu.pnum.GENERIC_F302R8TX.build.board=GENERIC_F302R8TX +GenF3.menu.pnum.GENERIC_F302R8TX.build.product_line=STM32F302x8 +GenF3.menu.pnum.GENERIC_F302R8TX.build.variant=STM32F3xx/F302R(6-8)T + +# Generic F303CBTx +GenF3.menu.pnum.GENERIC_F303CBTX=Generic F303CBTx +GenF3.menu.pnum.GENERIC_F303CBTX.upload.maximum_size=131072 +GenF3.menu.pnum.GENERIC_F303CBTX.upload.maximum_data_size=32768 +GenF3.menu.pnum.GENERIC_F303CBTX.build.board=GENERIC_F303CBTX +GenF3.menu.pnum.GENERIC_F303CBTX.build.product_line=STM32F303xC +GenF3.menu.pnum.GENERIC_F303CBTX.build.variant=STM32F3xx/F303C(B-C)T + +# Generic F303CCTx +GenF3.menu.pnum.GENERIC_F303CCTX=Generic F303CCTx +GenF3.menu.pnum.GENERIC_F303CCTX.upload.maximum_size=262144 +GenF3.menu.pnum.GENERIC_F303CCTX.upload.maximum_data_size=40960 +GenF3.menu.pnum.GENERIC_F303CCTX.build.board=GENERIC_F303CCTX +GenF3.menu.pnum.GENERIC_F303CCTX.build.product_line=STM32F303xC +GenF3.menu.pnum.GENERIC_F303CCTX.build.variant=STM32F3xx/F303C(B-C)T + +# Generic F303K6Tx +GenF3.menu.pnum.GENERIC_F303K6TX=Generic F303K6Tx +GenF3.menu.pnum.GENERIC_F303K6TX.upload.maximum_size=32768 +GenF3.menu.pnum.GENERIC_F303K6TX.upload.maximum_data_size=12288 +GenF3.menu.pnum.GENERIC_F303K6TX.build.board=GENERIC_F303K6TX +GenF3.menu.pnum.GENERIC_F303K6TX.build.product_line=STM32F303x8 +GenF3.menu.pnum.GENERIC_F303K6TX.build.variant=STM32F3xx/F303K(6-8)T_F334K(4-6-8)T + +# Generic F303K8Tx +GenF3.menu.pnum.GENERIC_F303K8TX=Generic F303K8Tx +GenF3.menu.pnum.GENERIC_F303K8TX.upload.maximum_size=65536 +GenF3.menu.pnum.GENERIC_F303K8TX.upload.maximum_data_size=12288 +GenF3.menu.pnum.GENERIC_F303K8TX.build.board=GENERIC_F303K8TX +GenF3.menu.pnum.GENERIC_F303K8TX.build.product_line=STM32F303x8 +GenF3.menu.pnum.GENERIC_F303K8TX.build.variant=STM32F3xx/F303K(6-8)T_F334K(4-6-8)T + +# Generic F303RDTx +GenF3.menu.pnum.GENERIC_F303RDTX=Generic F303RDTx +GenF3.menu.pnum.GENERIC_F303RDTX.upload.maximum_size=393216 +GenF3.menu.pnum.GENERIC_F303RDTX.upload.maximum_data_size=65536 +GenF3.menu.pnum.GENERIC_F303RDTX.build.board=GENERIC_F303RDTX +GenF3.menu.pnum.GENERIC_F303RDTX.build.product_line=STM32F303xE +GenF3.menu.pnum.GENERIC_F303RDTX.build.variant=STM32F3xx/F303R(D-E)T + +# Generic F303RETx +GenF3.menu.pnum.GENERIC_F303RETX=Generic F303RETx +GenF3.menu.pnum.GENERIC_F303RETX.upload.maximum_size=524288 +GenF3.menu.pnum.GENERIC_F303RETX.upload.maximum_data_size=65536 +GenF3.menu.pnum.GENERIC_F303RETX.build.board=GENERIC_F303RETX +GenF3.menu.pnum.GENERIC_F303RETX.build.product_line=STM32F303xE +GenF3.menu.pnum.GENERIC_F303RETX.build.variant=STM32F3xx/F303R(D-E)T + +# Generic F334K4Tx +GenF3.menu.pnum.GENERIC_F334K4TX=Generic F334K4Tx +GenF3.menu.pnum.GENERIC_F334K4TX.upload.maximum_size=16384 +GenF3.menu.pnum.GENERIC_F334K4TX.upload.maximum_data_size=12288 +GenF3.menu.pnum.GENERIC_F334K4TX.build.board=GENERIC_F334K4TX +GenF3.menu.pnum.GENERIC_F334K4TX.build.product_line=STM32F334x8 +GenF3.menu.pnum.GENERIC_F334K4TX.build.variant=STM32F3xx/F303K(6-8)T_F334K(4-6-8)T + +# Generic F334K6Tx +GenF3.menu.pnum.GENERIC_F334K6TX=Generic F334K6Tx +GenF3.menu.pnum.GENERIC_F334K6TX.upload.maximum_size=32768 +GenF3.menu.pnum.GENERIC_F334K6TX.upload.maximum_data_size=12288 +GenF3.menu.pnum.GENERIC_F334K6TX.build.board=GENERIC_F334K6TX +GenF3.menu.pnum.GENERIC_F334K6TX.build.product_line=STM32F334x8 +GenF3.menu.pnum.GENERIC_F334K6TX.build.variant=STM32F3xx/F303K(6-8)T_F334K(4-6-8)T + +# Generic F334K8Tx +GenF3.menu.pnum.GENERIC_F334K8TX=Generic F334K8Tx +GenF3.menu.pnum.GENERIC_F334K8TX.upload.maximum_size=65536 +GenF3.menu.pnum.GENERIC_F334K8TX.upload.maximum_data_size=12288 +GenF3.menu.pnum.GENERIC_F334K8TX.build.board=GENERIC_F334K8TX +GenF3.menu.pnum.GENERIC_F334K8TX.build.product_line=STM32F334x8 +GenF3.menu.pnum.GENERIC_F334K8TX.build.variant=STM32F3xx/F303K(6-8)T_F334K(4-6-8)T # Upload menu GenF3.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD) @@ -4480,7 +4568,8 @@ GenFlight.menu.pnum.Sparky_V1.build.cmsis_lib_gcc=arm_cortexM4lf_math GenFlight.menu.pnum.Sparky_V1.build.board=SPARKY_F303CC GenFlight.menu.pnum.Sparky_V1.build.product_line=STM32F303xC GenFlight.menu.pnum.Sparky_V1.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard -GenFlight.menu.pnum.Sparky_V1.build.variant=STM32F3xx/SPARKY_F303CC +GenFlight.menu.pnum.Sparky_V1.build.variant=STM32F3xx/F303C(B-C)T +GenFlight.menu.pnum.Sparky_V1.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS # Upload menu GenFlight.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD) diff --git a/variants/STM32F3xx/F302R(6-8)T/generic_clock.c b/variants/STM32F3xx/F302R(6-8)T/generic_clock.c index 5efee6877a..e686f76270 100644 --- a/variants/STM32F3xx/F302R(6-8)T/generic_clock.c +++ b/variants/STM32F3xx/F302R(6-8)T/generic_clock.c @@ -19,9 +19,72 @@ * @retval None */ WEAK void SystemClock_Config(void) +#if defined(USBCON) { - /* SystemClock_Config can be generated by STM32CubeMX */ -#warning "SystemClock_Config() is empty. Default clock at reset is used." + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } +} +#else +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + Error_Handler(); + } } +#endif /* USBCON */ #endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F3xx/F302R(6-8)T/ldscript.ld b/variants/STM32F3xx/F302R(6-8)T/ldscript.ld new file mode 100644 index 0000000000..66897d7f47 --- /dev/null +++ b/variants/STM32F3xx/F302R(6-8)T/ldscript.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F302R8Tx Device from STM32F3 series + * 64Kbytes FLASH + * 16Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F3xx/NUCLEO_F302R8/variant_NUCLEO_F302R8.cpp b/variants/STM32F3xx/F302R(6-8)T/variant_NUCLEO_F302R8.cpp similarity index 51% rename from variants/STM32F3xx/NUCLEO_F302R8/variant_NUCLEO_F302R8.cpp rename to variants/STM32F3xx/F302R(6-8)T/variant_NUCLEO_F302R8.cpp index 680a938e8f..0b19430a1a 100644 --- a/variants/STM32F3xx/NUCLEO_F302R8/variant_NUCLEO_F302R8.cpp +++ b/variants/STM32F3xx/F302R(6-8)T/variant_NUCLEO_F302R8.cpp @@ -1,31 +1,23 @@ /* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ + ******************************************************************************* + * Copyright (c) 2017-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F302R8) #include "pins_arduino.h" -#ifdef __cplusplus -extern "C" { -#endif - // Pin number const PinName digitalPin[] = { - PA_3, //D0 - PA_2, //D1 + PA_3, //D0/A12 + PA_2, //D1/A13 PA_10, //D2 PB_3, //D3 PB_5, //D4 @@ -37,14 +29,14 @@ const PinName digitalPin[] = { PB_6, //D10 PB_15, //D11 PB_14, //D12 - PB_13, //D13 + PB_13, //D13/A14 PB_9, //D14 PB_8, //D15 // ST Morpho // CN7 Left Side PC_10, //D16 PC_12, //D17 - PF_11, //D18 - BOOT0 + NC, //D18 - BOOT0 PA_13, //D19 - SWD PA_14, //D20 - SWD PA_15, //D21 @@ -96,12 +88,12 @@ const uint32_t analogInputPin[] = { 39, //A8 41, //A9 42, //A10 - 43 //A11 + 43, //A11 + 0, //A12 + 1, //A13 + 13 //A14 }; -#ifdef __cplusplus -} -#endif // ---------------------------------------------------------------------------- @@ -111,36 +103,30 @@ extern "C" { /** * @brief System Clock Configuration - * The system Clock is configured as follows : - * System Clock source = PLL (HSI) - * SYSCLK(Hz) = 64000000 - * HCLK(Hz) = 64000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * PLL_MUL = 9 - * Flash Latency(WS) = 2 * @param None * @retval None */ WEAK void SystemClock_Config(void) { - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; - /**Initializes the CPU, AHB and APB busses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = 16; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - /* Initialization Error */ - while (1); + Error_Handler(); } - - /**Initializes the CPU, AHB and APB busses clocks */ + /** Initializes the CPU, AHB and APB buses clocks + */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; @@ -149,11 +135,17 @@ WEAK void SystemClock_Config(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { - /* Initialization Error */ - while (1); + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); } } #ifdef __cplusplus } #endif + +#endif /* ARDUINO_NUCLEO_F302R8 */ diff --git a/variants/STM32F3xx/F302R(6-8)T/variant_NUCLEO_F302R8.h b/variants/STM32F3xx/F302R(6-8)T/variant_NUCLEO_F302R8.h new file mode 100644 index 0000000000..dedcb1ce2b --- /dev/null +++ b/variants/STM32F3xx/F302R(6-8)T/variant_NUCLEO_F302R8.h @@ -0,0 +1,157 @@ +/* + ******************************************************************************* + * Copyright (c) 2017-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA3 PIN_A12 +#define PA2 PIN_A13 +#define PA10 2 +#define PB3 3 +#define PB5 4 +#define PB4 5 +#define PB10 6 +#define PA8 7 +#define PA9 8 +#define PC7 9 +#define PB6 10 +#define PB15 11 +#define PB14 12 +#define PB13 PIN_A14 +#define PB9 14 +#define PB8 15 +// ST Morpho +// CN7 Left Side +#define PC10 16 +#define PC12 17 +// #define PF11 18 // BOOT0 +#define PA13 19 // SWD +#define PA14 20 // SWD +#define PA15 21 +#define PB7 22 +#define PC13 23 +#define PC14 24 +#define PC15 25 +#define PF0 26 +#define PF1 27 +#define PC2 PIN_A6 +#define PC3 PIN_A7 +// CN7 Right Side +#define PC11 30 +#define PD2 31 +// CN10 Left Side +#define PC9 32 +// CN10 Right side +#define PC8 33 +#define PC6 34 +#define PC5 35 +#define PA12 36 +#define PA11 37 +#define PB12 38 +#define PB11 PIN_A8 +#define PB2 40 +#define PB1 PIN_A9 +#define PA7 PIN_A10 +#define PA6 PIN_A11 +#define PA5 44 +#define PC4 45 +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA4 PIN_A2 +#define PB0 PIN_A3 +#define PC1 PIN_A4 +#define PC0 PIN_A5 + +// Alternate pins number +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA9_ALT1 (PA9 | ALT1) +#define PA10_ALT1 (PA10 | ALT1) +#define PA11_ALT1 (PA11 | ALT1) +#define PA12_ALT1 (PA12 | ALT1) +#define PB14_ALT1 (PB14 | ALT1) +#define PB15_ALT1 (PB15 | ALT1) +#define PB15_ALT2 (PB15 | ALT2) + +#define NUM_DIGITAL_PINS 52 +#define NUM_ANALOG_INPUTS 15 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_GREEN +#endif +#define LED_GREEN PB13 + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PC13 +#endif + +// Timer Definitions +// Use TIM6 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM2 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM6 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 2 //Connected to ST-Link +#endif + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA2 +#endif + +/* Extra HAL modules */ +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32F3xx/F303C(B-C)T/PeripheralPins_SPARKY_F303CC.c b/variants/STM32F3xx/F303C(B-C)T/PeripheralPins_SPARKY_F303CC.c new file mode 100644 index 0000000000..e8e879d447 --- /dev/null +++ b/variants/STM32F3xx/F303C(B-C)T/PeripheralPins_SPARKY_F303CC.c @@ -0,0 +1,286 @@ +/* + ******************************************************************************* + * Copyright (c) 2019-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32F303C(B-C)Tx.xml + * CubeMX DB release 6.0.20 + */ +#if defined(ARDUINO_SPARKY_F303CC) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 + {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 + {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 + {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 + {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 + {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 + {PB_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 + {PB_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 + // {PB_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 + // {PB_12, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC4_IN3 + // {PB_13, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 + // {PB_14, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC4_IN4 + // {PB_15, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC4_IN5 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 + {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PA_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + // {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // CAN_RX + {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_9, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, + // {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // CAN_TX + {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, + {NC, NP, 0} +}; +#endif + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + // {PA_1_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + // {PA_2_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + // {PA_3_ALT1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 + {PA_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + // {PA_6_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + // {PA_7_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N + // {PA_7_ALT2, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 + // {PA_7_ALT3, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N + {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1 + // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2 - SCL MPU-9150 + // {PA_9_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3 + // {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3 - SDA MPU-9150 + // {PA_10_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4 + // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - USB_DM + // {PA_11_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4 + // {PA_11_ALT2, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1 + // {PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - USB_DP + // {PA_12_ALT1, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 2, 0)}, // TIM4_CH2 + // {PA_12_ALT2, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + {PA_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 3, 0)}, // TIM4_CH3 + // {PA_13_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N + {PA_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2 + // {PA_15_ALT1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 + {PA_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1 + // {PB_0_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N + {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 + // {PB_0_ALT2, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N + // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N + {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 + // {PB_1_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 + // {PB_3_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N + // {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 + // {PB_4_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - LED_BLUE + // {PB_4_ALT2, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - LED_RED + // {PB_5_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N + // {PB_5_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 + // {PB_6_ALT1, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 + {PB_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 1, 0)}, // TIM8_CH1 + // {PB_6_ALT2, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N + // {PB_7_ALT1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4 + {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 + // {PB_7_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N + // {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - CAN_RX + // {PB_8_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 2, 0)}, // TIM8_CH2 + // {PB_8_ALT2, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 + // {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - CAN_TX + // {PB_9_ALT1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 3, 0)}, // TIM8_CH3 + // {PB_9_ALT2, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N + // {PB_14_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N + {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 + // {PB_15_ALT1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N + // {PB_15_ALT2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N + {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 + {PC_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N + {PF_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + // {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // SCL MPU-9150 + {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PB_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + // {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // SDA MPU-9150 + {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + // {PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // LED_BLUE + {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, + {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + // {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB_DP + {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + // {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB_DM + {PA_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + // {PB_5_ALT1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + // {PB_4_ALT1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + // {PB_3_ALT1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + // {PA_4_ALT1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + // {PA_15_ALT1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, + {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, + {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, + {NC, NP, 0} +}; +#endif + +//*** CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + // {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, // USB_DM + {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_TD[] = { + // {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, // USB_DP + {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED) +WEAK const PinMap PinMap_USB[] = { + {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF14_USB)}, // USB_DM + {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF14_USB)}, // USB_DP + {NC, NP, 0} +}; +#endif + +//*** No SD *** + +#endif /* ARDUINO_SPARKY_F303CC */ diff --git a/variants/STM32F3xx/F303C(B-C)T/generic_clock.c b/variants/STM32F3xx/F303C(B-C)T/generic_clock.c index e97c17e626..54c86cd35e 100644 --- a/variants/STM32F3xx/F303C(B-C)T/generic_clock.c +++ b/variants/STM32F3xx/F303C(B-C)T/generic_clock.c @@ -19,9 +19,72 @@ * @retval None */ WEAK void SystemClock_Config(void) +#if defined(USBCON) { - /* SystemClock_Config can be generated by STM32CubeMX */ -#warning "SystemClock_Config() is empty. Default clock at reset is used." + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } +} +#else +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + Error_Handler(); + } } +#endif /* USBCON */ #endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F3xx/F303C(B-C)T/ldscript.ld b/variants/STM32F3xx/F303C(B-C)T/ldscript.ld new file mode 100644 index 0000000000..b3aaf42ad4 --- /dev/null +++ b/variants/STM32F3xx/F303C(B-C)T/ldscript.ld @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F303CCTx Device from STM32F3 series + * 256Kbytes FLASH + * 8Kbytes CCMRAM + * 40Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + CCMRAM (xrw) : ORIGIN = 0x10000000, LENGTH = 8K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F3xx/PILL_F303XX/variant_PILL_F303XX.cpp b/variants/STM32F3xx/F303C(B-C)T/variant_BLACKPILL_F303CC.cpp similarity index 59% rename from variants/STM32F3xx/PILL_F303XX/variant_PILL_F303XX.cpp rename to variants/STM32F3xx/F303C(B-C)T/variant_BLACKPILL_F303CC.cpp index 51484169fd..9975be37cf 100644 --- a/variants/STM32F3xx/PILL_F303XX/variant_PILL_F303XX.cpp +++ b/variants/STM32F3xx/F303C(B-C)T/variant_BLACKPILL_F303CC.cpp @@ -1,38 +1,18 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2018-2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_BLACKPILL_F303CC) #include "pins_arduino.h" -#ifdef __cplusplus -extern "C" { -#endif - // Pin number const PinName digitalPin[] = { PB_9, //D0 @@ -48,10 +28,10 @@ const PinName digitalPin[] = { PA_10, //D10 PA_9, //D11 PA_8, //D12 - PB_15, //D13 - PB_14, //D14 - PB_13, //D15 - PB_12, //D16 + PB_15, //D13/A14 + PB_14, //D14/A13 + PB_13, //D15/A12 + PB_12, //D16/A11 PC_13, //D17 - LED PC_14, //D18 PC_15, //D19 @@ -67,9 +47,11 @@ const PinName digitalPin[] = { PB_1, //D29/A9 PB_10, //D30 PB_11, //D31 - PB_2, //D32 - BOOT1 + PB_2, //D32/A10 - BOOT1 PA_13, //D33 - SWDI0 PA_14, //D34 - SWCLK + PF_0, //D35 - OSC IN + PF_1 //D36 - OSC OUT }; // Analog (Ax) pin number array @@ -83,12 +65,14 @@ const uint32_t analogInputPin[] = { 26, // A6 27, // A7 28, // A8 - 29 // A9 + 29, // A9 + 32, // A10 + 16, // A11 + 15, // A12 + 14, // A13 + 13 // A14 }; -#ifdef __cplusplus -} -#endif // ---------------------------------------------------------------------------- @@ -134,3 +118,5 @@ WEAK void SystemClock_Config(void) #ifdef __cplusplus } #endif + +#endif /* ARDUINO_BLACKPILL_F303CC */ diff --git a/variants/STM32F3xx/F303C(B-C)T/variant_BLACKPILL_F303CC.h b/variants/STM32F3xx/F303C(B-C)T/variant_BLACKPILL_F303CC.h new file mode 100644 index 0000000000..49ecd0c77c --- /dev/null +++ b/variants/STM32F3xx/F303C(B-C)T/variant_BLACKPILL_F303CC.h @@ -0,0 +1,186 @@ +/* + ******************************************************************************* + * Copyright (c) 2018-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +// USB connector on the top, MCU side +// Left Side +#define PB9 0 +#define PB8 1 +#define PB7 2 +#define PB6 3 +#define PB5 4 +#define PB4 5 +#define PB3 6 +#define PA15 7 +#define PA12 8 // USB_DP +#define PA11 9 // USB_DM +#define PA10 10 +#define PA9 11 +#define PA8 12 +#define PB15 PIN_A14 +#define PB14 PIN_A13 +#define PB13 PIN_A12 +#define PB12 PIN_A11 +// Right side +#define PC13 17 // LED +#define PC14 18 +#define PC15 19 +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA3 PIN_A3 +#define PA4 PIN_A4 +#define PA5 PIN_A5 +#define PA6 PIN_A6 +#define PA7 PIN_A7 +#define PB0 PIN_A8 +#define PB1 PIN_A9 +#define PB10 30 +#define PB11 31 +// Other +#define PB2 PIN_A10 // BOOT1 +#define PA13 33 // SWDIO +#define PA14 34 // SWCLK +#define PF0 35 // OSC IN +#define PF1 36 // OSC OUT + +// Alternate pins number +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA9_ALT1 (PA9 | ALT1) +#define PA10_ALT1 (PA10 | ALT1) +#define PA11_ALT1 (PA11 | ALT1) +#define PA11_ALT2 (PA11 | ALT2) +#define PA12_ALT1 (PA12 | ALT1) +#define PA12_ALT2 (PA12 | ALT2) +#define PA13_ALT1 (PA13 | ALT1) +#define PA15_ALT1 (PA15 | ALT1) +#define PB0_ALT1 (PB0 | ALT1) +#define PB0_ALT2 (PB0 | ALT2) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB3_ALT1 (PB3 | ALT1) +#define PB4_ALT1 (PB4 | ALT1) +#define PB4_ALT2 (PB4 | ALT2) +#define PB5_ALT1 (PB5 | ALT1) +#define PB5_ALT2 (PB5 | ALT2) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB8_ALT1 (PB8 | ALT1) +#define PB8_ALT2 (PB8 | ALT2) +#define PB9_ALT1 (PB9 | ALT1) +#define PB9_ALT2 (PB9 | ALT2) +#define PB14_ALT1 (PB14 | ALT1) +#define PB15_ALT1 (PB15 | ALT1) +#define PB15_ALT2 (PB15 | ALT2) + +#define NUM_DIGITAL_PINS 37 +#define NUM_ANALOG_INPUTS 15 + +// On-board LED pin number +#define LED_BLUE PC13 +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_BLUE +#endif + +// SPI Definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA5 +#endif + +// I2C Definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM2 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA10 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA9 +#endif + +/* Extra HAL modules */ +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif + #ifndef SERIAL_PORT_USBVIRTUAL + #define SERIAL_PORT_USBVIRTUAL SerialUSB + #endif +#endif diff --git a/variants/STM32F3xx/SPARKY_F303CC/variant_SPARKY_F303CC.cpp b/variants/STM32F3xx/F303C(B-C)T/variant_SPARKY_F303CC.cpp similarity index 58% rename from variants/STM32F3xx/SPARKY_F303CC/variant_SPARKY_F303CC.cpp rename to variants/STM32F3xx/F303C(B-C)T/variant_SPARKY_F303CC.cpp index debb979caa..3813673dba 100644 --- a/variants/STM32F3xx/SPARKY_F303CC/variant_SPARKY_F303CC.cpp +++ b/variants/STM32F3xx/F303C(B-C)T/variant_SPARKY_F303CC.cpp @@ -1,38 +1,18 @@ /* ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics + * Copyright (c) 2018-2021, STMicroelectronics * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ +#if defined(ARDUINO_SPARKY_F303CC) #include "pins_arduino.h" -#ifdef __cplusplus -extern "C" { -#endif - // Pin number const PinName digitalPin[] = { PB_9, //D0 - CAN_TX @@ -48,10 +28,10 @@ const PinName digitalPin[] = { PA_10, //D10 - SDA MPU-9150 PA_9, //D11 - SCL MPU-9150 PA_8, //D12 - PB_15, //D13 - PB_14, //D14 - PB_13, //D15 - PB_12, //D16 + PB_15, //D13/A14 + PB_14, //D14/A13 + PB_13, //D15/A12 + PB_12, //D16/A11 PC_13, //D17 - LED on Bluepill Board PC_14, //D18 PC_15, //D19 @@ -67,9 +47,11 @@ const PinName digitalPin[] = { PB_1, //D29/A9 PB_10, //D30 - UART3_TX PB_11, //D31 - UART3_RX - PB_2, //D32 - BOOT1 + PB_2, //D32/A10 - BOOT1 PA_13, //D33 - SWDI0 PA_14, //D34 - SWCLK + PF_0, //D35 - OSC IN + PF_1 //D36 - OSC OUT }; // Analog (Ax) pin number array @@ -83,13 +65,14 @@ const uint32_t analogInputPin[] = { 26, // A6 27, // A7 28, // A8 - 29 // A9 + 29, // A9 + 32, // A10 + 16, // A11 + 15, // A12 + 14, // A13 + 13 // A14 }; -#ifdef __cplusplus -} -#endif - // ---------------------------------------------------------------------------- #ifdef __cplusplus @@ -99,9 +82,9 @@ extern "C" { WEAK void SystemClock_Config(void) { - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInit; + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; /**Initializes the CPU, AHB and APB busses clocks */ @@ -114,7 +97,7 @@ WEAK void SystemClock_Config(void) RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - _Error_Handler(__FILE__, __LINE__); + Error_Handler(); } /**Initializes the CPU, AHB and APB busses clocks @@ -127,7 +110,7 @@ WEAK void SystemClock_Config(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { - _Error_Handler(__FILE__, __LINE__); + Error_Handler(); } PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART3 @@ -136,10 +119,12 @@ WEAK void SystemClock_Config(void) PeriphClkInit.Usart3ClockSelection = RCC_USART3CLKSOURCE_PCLK1; PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_HSI; if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { - _Error_Handler(__FILE__, __LINE__); + Error_Handler(); } } #ifdef __cplusplus } #endif + +#endif /* ARDUINO_SPARKY_F303CC */ diff --git a/variants/STM32F3xx/F303C(B-C)T/variant_SPARKY_F303CC.h b/variants/STM32F3xx/F303C(B-C)T/variant_SPARKY_F303CC.h new file mode 100644 index 0000000000..ff3a666c7d --- /dev/null +++ b/variants/STM32F3xx/F303C(B-C)T/variant_SPARKY_F303CC.h @@ -0,0 +1,184 @@ +/* + ******************************************************************************* + * Copyright (c) 2018-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +// USB connector on the top, MCU side +// Left Side +#define PB9 0 // CAN_TX +#define PB8 1 // CAN_RX +#define PB7 2 // UART1_RX or I2C1_SDC +#define PB6 3 // UART1_TX or I2C1_SCL +#define PB5 4 // LED_BLUE +#define PB4 5 // LED_RED +#define PB3 6 +#define PA15 7 +#define PA12 8 // USB_DP +#define PA11 9 // USB_DM +#define PA10 10 // SDA MPU-9150 +#define PA9 11 // SCL MPU-9150 +#define PA8 12 +#define PB15 PIN_A14 +#define PB14 PIN_A13 +#define PB13 PIN_A12 +#define PB12 PIN_A11 +// Right side +#define PC13 17 // LED on Bluepill Board +#define PC14 18 +#define PC15 19 +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA2 PIN_A2 +#define PA3 PIN_A3 // RCX +#define PA4 PIN_A4 +#define PA5 PIN_A5 +#define PA6 PIN_A6 +#define PA7 PIN_A7 +#define PB0 PIN_A8 +#define PB1 PIN_A9 +#define PB10 30 // UART3_TX +#define PB11 31 // UART3_RX +// Other +#define PB2 PIN_A10 // BOOT1 +#define PA13 33 // SWDI0 +#define PA14 34 // SWCLK +#define PF0 35 // OSC IN +#define PF1 36 // OSC OUT + +// Alternate pins number +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA9_ALT1 (PA9 | ALT1) +#define PA10_ALT1 (PA10 | ALT1) +#define PA11_ALT1 (PA11 | ALT1) +#define PA11_ALT2 (PA11 | ALT2) +#define PA12_ALT1 (PA12 | ALT1) +#define PA12_ALT2 (PA12 | ALT2) +#define PA13_ALT1 (PA13 | ALT1) +#define PA15_ALT1 (PA15 | ALT1) +#define PB0_ALT1 (PB0 | ALT1) +#define PB0_ALT2 (PB0 | ALT2) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB3_ALT1 (PB3 | ALT1) +#define PB4_ALT1 (PB4 | ALT1) +#define PB4_ALT2 (PB4 | ALT2) +#define PB5_ALT1 (PB5 | ALT1) +#define PB5_ALT2 (PB5 | ALT2) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB8_ALT1 (PB8 | ALT1) +#define PB8_ALT2 (PB8 | ALT2) +#define PB9_ALT1 (PB9 | ALT1) +#define PB9_ALT2 (PB9 | ALT2) +#define PB14_ALT1 (PB14 | ALT1) +#define PB15_ALT1 (PB15 | ALT1) +#define PB15_ALT2 (PB15 | ALT2) + +#define NUM_DIGITAL_PINS 37 +#define NUM_ANALOG_INPUTS 15 + +// On-board LED pin number +#define LED_RED PB4 +#define LED_BLUE PB5 +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_BLUE +#endif + +// SPI Definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA4 +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA7 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA6 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA5 +#endif + +// I2C Definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA10 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA9 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 3 +#endif + +// Default pin used for 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PB11 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PB10 +#endif + +/* Extra HAL modules */ +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial3 + #endif +#endif diff --git a/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/generic_clock.c b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/generic_clock.c index 18bba7ccff..0d0a86e784 100644 --- a/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/generic_clock.c +++ b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/generic_clock.c @@ -21,9 +21,72 @@ * @retval None */ WEAK void SystemClock_Config(void) +#if defined(USBCON) { - /* SystemClock_Config can be generated by STM32CubeMX */ -#warning "SystemClock_Config() is empty. Default clock at reset is used." + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } +} +#else +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + Error_Handler(); + } } +#endif /* USBCON */ #endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/ldscript.ld b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/ldscript.ld new file mode 100644 index 0000000000..cee35270a6 --- /dev/null +++ b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/ldscript.ld @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F303K8Tx Device from STM32F3 series + * 64Kbytes FLASH + * 4Kbytes CCMRAM + * 12Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 4K + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F3xx/NUCLEO_F303K8/variant_NUCLEO_F303K8.cpp b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/variant_NUCLEO_F303K8.cpp similarity index 70% rename from variants/STM32F3xx/NUCLEO_F303K8/variant_NUCLEO_F303K8.cpp rename to variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/variant_NUCLEO_F303K8.cpp index a7dd3613f5..f88f70516f 100644 --- a/variants/STM32F3xx/NUCLEO_F303K8/variant_NUCLEO_F303K8.cpp +++ b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/variant_NUCLEO_F303K8.cpp @@ -1,27 +1,18 @@ /* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - + ******************************************************************************* + * Copyright (c) 2017-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F303K8) #include "pins_arduino.h" -#ifdef __cplusplus -extern "C" { -#endif - // Pin number const PinName digitalPin[] = { PA_10, //D0 @@ -46,7 +37,9 @@ const PinName digitalPin[] = { PA_6, //D19/A5 PA_7, //D20/A6 PA_2, //D21/A7 - STLink Tx - PA_15 //D22 - STLink Rx + PA_15, //D22 - STLink Rx + PA_13, //D23 - SWDIO + PA_14 //D24 - SWCLK }; // Analog (Ax) pin number array @@ -63,10 +56,6 @@ const uint32_t analogInputPin[] = { 6 //A9 }; -#ifdef __cplusplus -} -#endif - // ---------------------------------------------------------------------------- #ifdef __cplusplus @@ -92,7 +81,7 @@ WEAK void SystemClock_Config(void) RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { - while (1); + Error_Handler(); } /* Initializes the CPU, AHB and APB busses clocks */ @@ -104,17 +93,19 @@ WEAK void SystemClock_Config(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { - while (1); + Error_Handler(); } PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12; PeriphClkInit.Adc12ClockSelection = RCC_ADC12PLLCLK_DIV1; PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_SYSCLK; if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { - while (1); + Error_Handler(); } } #ifdef __cplusplus } #endif + +#endif /* ARDUINO_NUCLEO_F303K8 */ diff --git a/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/variant_NUCLEO_F303K8.h b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/variant_NUCLEO_F303K8.h new file mode 100644 index 0000000000..0e6e64de1c --- /dev/null +++ b/variants/STM32F3xx/F303K(6-8)T_F334K(4-6-8)T/variant_NUCLEO_F303K8.h @@ -0,0 +1,136 @@ +/* + ******************************************************************************* + * Copyright (c) 2017-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA10 0 +#define PA9 1 +#define PA12 2 +#define PB0 PIN_A8 +#define PB7 4 +#define PB6 5 +#define PB1 PIN_A9 +#define PF0 7 +#define PF1 8 +#define PA8 9 +#define PA11 10 +#define PB5 11 +#define PB4 12 +#define PB3 13 // LED +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA3 PIN_A2 +#define PA4 PIN_A3 +#define PA5 PIN_A4 // if SB18 ON (default) connected to PB7 +#define PA6 PIN_A5 // if SB16 ON (default) connected to PB6 +#define PA7 PIN_A6 +#define PA2 PIN_A7 // SB2 ON STLink Tx +#define PA15 22 // STLink Rx +#define PA13 23 // SWDIO +#define PA14 24 // SWCLK + +// Alternate pins number +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA9_ALT1 (PA9 | ALT1) +#define PA10_ALT1 (PA10 | ALT1) +#define PA11_ALT1 (PA11 | ALT1) +#define PA12_ALT1 (PA12 | ALT1) +#define PB0_ALT1 (PB0 | ALT1) +#define PB1_ALT1 (PB1 | ALT1) +#define PB4_ALT1 (PB4 | ALT1) +#define PB5_ALT1 (PB5 | ALT1) +#define PB7_ALT1 (PB7 | ALT1) + +#define NUM_DIGITAL_PINS 25 +#define NUM_ANALOG_INPUTS 10 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_GREEN +#endif +#define LED_GREEN PB3 + +// On-board user button +#ifndef USER_BTN + #define USER_BTN ND +#endif + +// I2C Definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PB7 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PB6 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 2 //Connected to ST-Link +#endif + +// Serial Pin Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA15 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA2 +#endif + +/* Extra HAL modules */ +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32F3xx/F303R(D-E)T/generic_clock.c b/variants/STM32F3xx/F303R(D-E)T/generic_clock.c index 57e940fada..dc6db9a62b 100644 --- a/variants/STM32F3xx/F303R(D-E)T/generic_clock.c +++ b/variants/STM32F3xx/F303R(D-E)T/generic_clock.c @@ -20,8 +20,41 @@ */ WEAK void SystemClock_Config(void) { - /* SystemClock_Config can be generated by STM32CubeMX */ -#warning "SystemClock_Config() is empty. Default clock at reset is used." + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } } + #endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32F3xx/F303R(D-E)T/ldscript.ld b/variants/STM32F3xx/F303R(D-E)T/ldscript.ld new file mode 100644 index 0000000000..a4382dbaef --- /dev/null +++ b/variants/STM32F3xx/F303R(D-E)T/ldscript.ld @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F303RETx Device from STM32F3 series + * 512Kbytes FLASH + * 16Kbytes CCMRAM + * 64Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + CCMRAM (xrw) : ORIGIN = 0x10000000, LENGTH = 16K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.cpp b/variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.cpp new file mode 100644 index 0000000000..42766564bf --- /dev/null +++ b/variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.cpp @@ -0,0 +1,156 @@ +/* + ******************************************************************************* + * Copyright (c) 2017-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_F303RE) +#include "pins_arduino.h" + +// Pin number +const PinName digitalPin[] = { + PA_3, //D0/A14 + PA_2, //D1/A15 + PA_10, //D2 + PB_3, //D3 + PB_5, //D4 + PB_4, //D5 + PB_10, //D6 + PA_8, //D7 + PA_9, //D8 + PC_7, //D9 + PB_6, //D10 + PA_7, //D11/A6 + PA_6, //D12/A7 + PA_5, //D13/A16 + PB_9, //D14 + PB_8, //D15 + // ST Morpho + // CN7 Left Side + PC_10, //D16 + PC_12, //D17 + NC, //D18 - BOOT0 + PA_13, //D19 - SWD + PA_14, //D20 - SWD + PA_15, //D21 + PB_7, //D22 + PC_13, //D23 + PC_14, //D24 + PC_15, //D25 + PF_0, //D26 + PF_1, //D27 + PC_2, //D28/A8 + PC_3, //D29/A9 + // CN7 Right Side + PC_11, //D30 + PD_2, //D31 + // CN10 Left Side + PC_9, //D32 + // CN10 Right side + PC_8, //D33 + PC_6, //D34 + PC_5, //D35/A10 + PA_12, //D36 + PA_11, //D37 + PB_12, //D38/A22 + PB_11, //D39/A11 + PB_2, //D40/A12 + PB_1, //D41/A19 + PB_15, //D42/A17 + PB_14, //D43/A18 + PB_13, //D44/A20 + PC_4, //D45/A13 + PA_0, //D46/A0 + PA_1, //D47/A1 + PA_4, //D48/A2 + PB_0, //D49/A3 + PC_1, //D50/A4 + PC_0 //D51/A5 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 46, //A0 + 47, //A1 + 48, //A2 + 49, //A3 + 50, //A4 + 51, //A5 + 11, //A6 + 12, //A7 + 28, //A8 + 29, //A9 + 35, //A10 + 39, //A11 + 40, //A12 + 45, //A13 + 0, //A14 + 1, //A15 + 13, //A16 + 42, //A17 + 43, //A18 + 41, //A19 + 44, //A20 + 38 //A21 +}; + +// ---------------------------------------------------------------------------- + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; + RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { + Error_Handler(); + } + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif + +#endif /* ARDUINO_NUCLEO_F303RE */ diff --git a/variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.h b/variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.h new file mode 100644 index 0000000000..1382f358fd --- /dev/null +++ b/variants/STM32F3xx/F303R(D-E)T/variant_NUCLEO_F303RE.h @@ -0,0 +1,193 @@ +/* + ******************************************************************************* + * Copyright (c) 2017-2021, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA3 PIN_A14 +#define PA2 PIN_A15 +#define PA10 2 +#define PB3 3 +#define PB5 4 +#define PB4 5 +#define PB10 6 +#define PA8 7 +#define PA9 8 +#define PC7 9 +#define PB6 10 +#define PA7 PIN_A6 +#define PA6 PIN_A7 +#define PA5 PIN_A16 +#define PB9 14 +#define PB8 15 +// ST Morpho +// CN7 Left Side +#define PC10 16 +#define PC12 17 +//#define PF11 18 // BOOT0 +#define PA13 19 // SWD +#define PA14 20 // SWD +#define PA15 21 +#define PB7 22 +#define PC13 23 +#define PC14 24 +#define PC15 25 +#define PF0 26 +#define PF1 27 +#define PC2 PIN_A8 +#define PC3 PIN_A9 +// CN7 Right Side +#define PC11 30 +#define PD2 31 +// CN10 Left Side +#define PC9 32 +// CN10 Right side +#define PC8 33 +#define PC6 34 +#define PC5 PIN_A10 +#define PA12 36 +#define PA11 37 +#define PB12 PIN_A21 +#define PB11 PIN_A11 +#define PB2 PIN_A12 +#define PB1 PIN_A19 +#define PB15 PIN_A17 +#define PB14 PIN_A18 +#define PB13 PIN_A20 +#define PC4 PIN_A13 +#define PA0 PIN_A0 +#define PA1 PIN_A1 +#define PA4 PIN_A2 +#define PB0 PIN_A3 +#define PC1 PIN_A4 +#define PC0 PIN_A5 + +// Alternate pins number +#define PA1_ALT1 (PA1 | ALT1) +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) +#define PA4_ALT1 (PA4 | ALT1) +#define PA6_ALT1 (PA6 | ALT1) +#define PA7_ALT1 (PA7 | ALT1) +#define PA7_ALT2 (PA7 | ALT2) +#define PA7_ALT3 (PA7 | ALT3) +#define PA9_ALT1 (PA9 | ALT1) +#define PA10_ALT1 (PA10 | ALT1) +#define PA11_ALT1 (PA11 | ALT1) +#define PA11_ALT2 (PA11 | ALT2) +#define PA12_ALT1 (PA12 | ALT1) +#define PA12_ALT2 (PA12 | ALT2) +#define PA13_ALT1 (PA13 | ALT1) +#define PA15_ALT1 (PA15 | ALT1) +#define PB0_ALT1 (PB0 | ALT1) +#define PB0_ALT2 (PB0 | ALT2) +#define PB1_ALT1 (PB1 | ALT1) +#define PB1_ALT2 (PB1 | ALT2) +#define PB3_ALT1 (PB3 | ALT1) +#define PB4_ALT1 (PB4 | ALT1) +#define PB4_ALT2 (PB4 | ALT2) +#define PB5_ALT1 (PB5 | ALT1) +#define PB5_ALT2 (PB5 | ALT2) +#define PB6_ALT1 (PB6 | ALT1) +#define PB6_ALT2 (PB6 | ALT2) +#define PB7_ALT1 (PB7 | ALT1) +#define PB7_ALT2 (PB7 | ALT2) +#define PB8_ALT1 (PB8 | ALT1) +#define PB8_ALT2 (PB8 | ALT2) +#define PB9_ALT1 (PB9 | ALT1) +#define PB9_ALT2 (PB9 | ALT2) +#define PB11_ALT1 (PB11 | ALT1) +#define PB14_ALT1 (PB14 | ALT1) +#define PB15_ALT1 (PB15 | ALT1) +#define PB15_ALT2 (PB15 | ALT2) +#define PC0_ALT1 (PC0 | ALT1) +#define PC1_ALT1 (PC1 | ALT1) +#define PC2_ALT1 (PC2 | ALT1) +#define PC3_ALT1 (PC3 | ALT1) +#define PC6_ALT1 (PC6 | ALT1) +#define PC7_ALT1 (PC7 | ALT1) +#define PC8_ALT1 (PC8 | ALT1) +#define PC9_ALT1 (PC9 | ALT1) +#define PC10_ALT1 (PC10 | ALT1) +#define PC11_ALT1 (PC11 | ALT1) + +#define NUM_DIGITAL_PINS 52 +#define NUM_ANALOG_INPUTS 22 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_GREEN +#endif +#define LED_GREEN PA5 + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PC13 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM7 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 2 //Connected to ST-Link +#endif + +// Default pin used for 'Serial' instance (ex: ST-Link) +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA3 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA2 +#endif + +/* Extra HAL modules */ +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32F3xx/NUCLEO_F302R8/PeripheralPins.c b/variants/STM32F3xx/NUCLEO_F302R8/PeripheralPins.c deleted file mode 100644 index c348f2bdcf..0000000000 --- a/variants/STM32F3xx/NUCLEO_F302R8/PeripheralPins.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F302R(6-8)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - A0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - A1 - // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - STLink Tx - // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - STLink Rx - {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 - A2 - {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 - {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 - A3 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 - {PB_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 - // {PB_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 - User LED - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - A5 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 - A4 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PA_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_5, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C3)}, - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)}, - {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)}, - {PA_9, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - // {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N - // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - STLink Tx - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 - STLink Tx - // {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - STLink Rx - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 - STLink Rx - // {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2 - // {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3 - // {PA_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4 - // {PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PA_12, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PA_13, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PB_4, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PB_5, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - // {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - // {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - // {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PC_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PC_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PC_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PC_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N - {PF_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_5, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // User LED - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PF_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PF_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_TIM1)}, - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_TIM1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_TIM1)}, - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_TIM1)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** diff --git a/variants/STM32F3xx/NUCLEO_F302R8/PinNamesVar.h b/variants/STM32F3xx/NUCLEO_F302R8/PinNamesVar.h deleted file mode 100644 index 99d2aa0832..0000000000 --- a/variants/STM32F3xx/NUCLEO_F302R8/PinNamesVar.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = NC, -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = NC, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = NC, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = NC, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = NC, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = NC, -#endif -/* USB */ -#ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, -#endif diff --git a/variants/STM32F3xx/NUCLEO_F302R8/ldscript.ld b/variants/STM32F3xx/NUCLEO_F302R8/ldscript.ld deleted file mode 100644 index 95b26f7f8e..0000000000 --- a/variants/STM32F3xx/NUCLEO_F302R8/ldscript.ld +++ /dev/null @@ -1,188 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F302R8Tx Device with -** 64KByte FLASH, 16KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20004000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/variants/STM32F3xx/NUCLEO_F302R8/variant_NUCLEO_F302R8.h b/variants/STM32F3xx/NUCLEO_F302R8/variant_NUCLEO_F302R8.h deleted file mode 100644 index 51b188cbc9..0000000000 --- a/variants/STM32F3xx/NUCLEO_F302R8/variant_NUCLEO_F302R8.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA3 0 -#define PA2 1 -#define PA10 2 -#define PB3 3 -#define PB5 4 -#define PB4 5 -#define PB10 6 -#define PA8 7 -#define PA9 8 -#define PC7 9 -#define PB6 10 -#define PB15 11 -#define PB14 12 -#define PB13 13 -#define PB9 14 -#define PB8 15 -// ST Morpho -// CN7 Left Side -#define PC10 16 -#define PC12 17 -#define PF11 18 // BOOT0 -#define PA13 19 // SWD -#define PA14 20 // SWD -#define PA15 21 -#define PB7 22 -#define PC13 23 -#define PC14 24 -#define PC15 25 -#define PF0 26 -#define PF1 27 -#define PC2 A6 -#define PC3 A7 -// CN7 Right Side -#define PC11 30 -#define PD2 31 -// CN10 Left Side -#define PC9 32 -// CN10 Right side -#define PC8 33 -#define PC6 34 -#define PC5 35 -#define PA12 36 -#define PA11 37 -#define PB12 38 -#define PB11 A8 -#define PB2 40 -#define PB1 A9 -#define PA7 A10 -#define PA6 A11 -#define PA5 44 -#define PC4 45 -#define PA0 46 // A0 -#define PA1 47 // A1 -#define PA4 48 // A2 -#define PB0 49 // A3 -#define PC1 50 // A4 -#define PC0 51 // A5 - -// This must be a literal -#define NUM_DIGITAL_PINS 52 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 12 - -// On-board LED pin number -#define LED_BUILTIN 13 -#define LED_GREEN LED_BUILTIN - -// On-board user button -#define USER_BTN PC13 - -// Timer Definitions -// Use TIM6 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM2 -#define TIMER_SERVO TIM6 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link - -// Default pin used for 'Serial' instance (ex: ST-Link) -// Mandatory for Firmata -#define PIN_SERIAL_RX 0 -#define PIN_SERIAL_TX 1 - -/* Extra HAL modules */ -#define HAL_DAC_MODULE_ENABLED - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F3xx/NUCLEO_F303K8/PeripheralPins.c b/variants/STM32F3xx/NUCLEO_F303K8/PeripheralPins.c deleted file mode 100644 index 3fa68a7a7a..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303K8/PeripheralPins.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F303K(6-8)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - VCP_Tx - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 - {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 - {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 - {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 - {PA_6, DAC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC2_OUT1 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - // {PA_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // SWCLK - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // VCP_RX - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 - VCP_Tx - // {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - // {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2 - // {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3 - // {PA_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4 - // {PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PA_12, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_13, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N // SWDIO - {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - // {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PB_4, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PB_5, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - // {PB_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4 - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N - {PF_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - // {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // SWCLK - {PB_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // VCP_RX - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** No USB *** diff --git a/variants/STM32F3xx/NUCLEO_F303K8/PinNamesVar.h b/variants/STM32F3xx/NUCLEO_F303K8/PinNamesVar.h deleted file mode 100644 index 4a88bd7e71..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303K8/PinNamesVar.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, /* manually updated */ -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = NC, -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = NC, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = NC, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = NC, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = NC, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = NC, -#endif diff --git a/variants/STM32F3xx/NUCLEO_F303K8/ldscript.ld b/variants/STM32F3xx/NUCLEO_F303K8/ldscript.ld deleted file mode 100644 index 99e095dfb8..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303K8/ldscript.ld +++ /dev/null @@ -1,208 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F303K8Tx Device with -** 64KByte FLASH, 12KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20003000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 12K -CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 4K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/variants/STM32F3xx/NUCLEO_F303K8/variant_NUCLEO_F303K8.h b/variants/STM32F3xx/NUCLEO_F303K8/variant_NUCLEO_F303K8.h deleted file mode 100644 index 51a2fe6474..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303K8/variant_NUCLEO_F303K8.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA10 0 -#define PA9 1 -#define PA12 2 -#define PB0 A8 -#define PB7 4 -#define PB6 5 -#define PB1 A9 -#define PF0 7 -#define PF1 8 -#define PA8 9 -#define PA11 10 -#define PB5 11 -#define PB4 12 -#define PB3 13 // LED -#define PA0 A0 -#define PA1 A1 -#define PA3 A2 -#define PA4 A3 -#define PA5 A4 // if SB18 ON (default) connected to PB7 -#define PA6 A5 // if SB16 ON (default) connected to PB6 -#define PA7 A6 -#define PA2 A7 // SB2 ON STLink Tx -#define PA15 22 // STLink Rx - -// This must be a literal -#define NUM_DIGITAL_PINS 23 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 10 - -// On-board LED pin number -#define LED_BUILTIN 13 -#define LED_GREEN LED_BUILTIN - -// On-board user button -//#define USER_BTN NC - -// I2C Definitions -#define PIN_WIRE_SDA 4 -#define PIN_WIRE_SCL 5 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM7 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link - -// Serial Pin Firmata -#define PIN_SERIAL_RX PA15 // 22 -#define PIN_SERIAL_TX PA2 // 21 - -/* Extra HAL modules */ -#define HAL_DAC_MODULE_ENABLED - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F3xx/NUCLEO_F303RE/PeripheralPins.c b/variants/STM32F3xx/NUCLEO_F303RE/PeripheralPins.c deleted file mode 100644 index c24cd8059e..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303RE/PeripheralPins.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F303R(D-E)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - A0 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - A1 - // {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - STLink Tx - // {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - STLink Rx - {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - A2 - // {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 - LED1 - {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 - {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - {PB_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 - // {PB_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 - {PB_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 - {PB_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 - // {PB_11, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14 - // {PB_12, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC4_IN3 - // {PB_13, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - // {PB_14, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC4_IN4 - // {PB_15, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC4_IN5 - {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 - A5 - // {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6 - A5 - {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 - A4 - // {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 - A4 - {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 - // {PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8 - {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 - // {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9 - {PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5 - {PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2 - LED1 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PA_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_5, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF8_I2C3)}, - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)}, - {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF3_I2C3)}, - {PA_9, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - // {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N - // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - STLink Tx - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 - STLink Tx - // {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - STLink Rx - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 - STLink Rx - {PA_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2 - // {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3 - // {PA_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4 - // {PA_11, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1 - // {PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - // {PA_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 2, 0)}, // TIM4_CH2 - {PA_12, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 3, 0)}, // TIM4_CH3 - {PA_13, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - {PA_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2 - // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1 - {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - // {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N - // {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - {PB_3, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - // {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - // {PB_4, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - {PB_4, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PB_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - {PB_5, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 - // {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - // {PB_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 1, 0)}, // TIM8_CH1 - {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - // {PB_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N - // {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - // {PB_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 2, 0)}, // TIM8_CH2 - {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - // {PB_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 3, 0)}, // TIM8_CH3 - {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - // {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1 - {PC_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 2, 0)}, // TIM1_CH2 - {PC_2, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3 - {PC_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4 - {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - // {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 0)}, // TIM8_CH1 - {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 0)}, // TIM8_CH2 - {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - // {PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 0)}, // TIM8_CH3 - {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - // {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 4, 0)}, // TIM8_CH4 - {PC_10, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - {PC_11, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - {PC_12, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N - {PC_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N - {PF_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)}, - // {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PC_5, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART4)}, - // {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_UART5)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - // {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - // {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // LED1 - // {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PF_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - // {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - // {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {PF_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_DP - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** diff --git a/variants/STM32F3xx/NUCLEO_F303RE/PinNamesVar.h b/variants/STM32F3xx/NUCLEO_F303RE/PinNamesVar.h deleted file mode 100644 index 81b582ba4c..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303RE/PinNamesVar.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = PE_6, /* manually updated */ -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = NC, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = NC, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = NC, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = NC, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = NC, -#endif -/* USB */ -#ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, -#endif diff --git a/variants/STM32F3xx/NUCLEO_F303RE/ldscript.ld b/variants/STM32F3xx/NUCLEO_F303RE/ldscript.ld deleted file mode 100644 index c1c8e7d494..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303RE/ldscript.ld +++ /dev/null @@ -1,180 +0,0 @@ -/** - ****************************************************************************** - * @file STM32F303RE_FLASH.h - * @author WI6LABS - * @version V1.0.0 - * @date 27-July-2016 - * @brief Linker script for STM32F303RE Device with - * 512KByte FLASH, 80KByte RAM - * - * Set heap size, stack size and stack location according - * to application requirements. - * - * Set memory bank area and size if external memory is used. - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20010000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200;; /* required amount of heap */ -_Min_Stack_Size = 0x400;; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata ALIGN(4): - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(4); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.cpp b/variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.cpp deleted file mode 100644 index 07de4ea464..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.cpp +++ /dev/null @@ -1,144 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "pins_arduino.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// Pin number -const PinName digitalPin[] = { - PA_3, //D0 - PA_2, //D1 - PA_10, //D2 - PB_3, //D3 - PB_5, //D4 - PB_4, //D5 - PB_10, //D6 - PA_8, //D7 - PA_9, //D8 - PC_7, //D9 - PB_6, //D10 - PA_7, //D11 - PA_6, //D12 - PA_5, //D13 - PB_9, //D14 - PB_8, //D15 - // ST Morpho - // CN7 Left Side - PC_10, //D16 - PC_12, //D17 - PF_11, //D18 - BOOT0 - PA_13, //D19 - SWD - PA_14, //D20 - SWD - PA_15, //D21 - PB_7, //D22 - PC_13, //D23 - PC_14, //D24 - PC_15, //D25 - PF_0, //D26 - PF_1, //D27 - PC_2, //D28 - PC_3, //D29 - // CN7 Right Side - PC_11, //D30 - PD_2, //D31 - // CN10 Left Side - PC_9, //D32 - // CN10 Right side - PC_8, //D33 - PC_6, //D34 - PC_5, //D35 - PA_12, //D36 - PA_11, //D37 - PB_12, //D38 - PB_11, //D39 - PB_2, //D40 - PB_1, //D41 - PB_15, //D42 - PB_14, //D43 - PB_13, //D44 - PC_4, //D45 - PA_0, //D46/A0 - PA_1, //D47/A1 - PA_4, //D48/A2 - PB_0, //D49/A3 - PC_1, //D50/A4 - PC_0 //D51/A5 -}; - -// Analog (Ax) pin number array -const uint32_t analogInputPin[] = { - 46, //A0 - 47, //A1 - 48, //A2 - 49, //A3 - 50, //A4 - 51, //A5 - 11, //A6 - 12, //A7 - 28, //A8 - 29, //A9 - 35, //A10 - 39, //A11 - 40, //A12 - 45 //A13 -}; - -#ifdef __cplusplus -} -#endif - -// ---------------------------------------------------------------------------- - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @brief System Clock Configuration - * @param None - * @retval None - */ -WEAK void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_ClkInitTypeDef RCC_ClkInitStruct; - - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = 16; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; - RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK - | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); -} - -#ifdef __cplusplus -} -#endif diff --git a/variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.h b/variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.h deleted file mode 100644 index 8c5fb039ae..0000000000 --- a/variants/STM32F3xx/NUCLEO_F303RE/variant_NUCLEO_F303RE.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - Copyright (c) 2011 Arduino. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -#define PA3 0 -#define PA2 1 -#define PA10 2 -#define PB3 3 -#define PB5 4 -#define PB4 5 -#define PB10 6 -#define PA8 7 -#define PA9 8 -#define PC7 9 -#define PB6 10 -#define PA7 A6 -#define PA6 A7 -#define PA5 13 -#define PB9 14 -#define PB8 15 -// ST Morpho -// CN7 Left Side -#define PC10 16 -#define PC12 17 -#define PF11 18 // BOOT0 -#define PA13 19 // SWD -#define PA14 20 // SWD -#define PA15 21 -#define PB7 22 -#define PC13 23 -#define PC14 24 -#define PC15 25 -#define PF0 26 -#define PF1 27 -#define PC2 A8 -#define PC3 A9 -// CN7 Right Side -#define PC11 30 -#define PD2 31 -// CN10 Left Side -#define PC9 32 -// CN10 Right side -#define PC8 33 -#define PC6 34 -#define PC5 A10 -#define PA12 36 -#define PA11 37 -#define PB12 38 -#define PB11 A11 -#define PB2 A12 -#define PB1 41 -#define PB15 42 -#define PB14 43 -#define PB13 44 -#define PC4 A13 -#define PA0 A0 -#define PA1 A1 -#define PA4 A2 -#define PB0 A3 -#define PC1 A4 -#define PC0 A5 - -// This must be a literal -#define NUM_DIGITAL_PINS 52 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 14 - -// On-board LED pin number -#define LED_BUILTIN 13 -#define LED_GREEN LED_BUILTIN - -// On-board user button -#define USER_BTN PC13 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM7 - -// UART Definitions -#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link - -// Default pin used for 'Serial' instance (ex: ST-Link) -// Mandatory for Firmata -#define PIN_SERIAL_RX 0 -#define PIN_SERIAL_TX 1 - -/* Extra HAL modules */ -#define HAL_DAC_MODULE_ENABLED - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F3xx/PILL_F303XX/PeripheralPins.c b/variants/STM32F3xx/PILL_F303XX/PeripheralPins.c deleted file mode 100644 index 19f625afe8..0000000000 --- a/variants/STM32F3xx/PILL_F303XX/PeripheralPins.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F303C(B-C)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 - {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 - {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - {PB_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 - {PB_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 - // {PB_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 - // {PB_12, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC4_IN3 - // {PB_13, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - // {PB_14, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC4_IN4 - // {PB_15, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC4_IN5 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PA_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_9, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - // {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1 - {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2 - // {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3 - {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3 - // {PA_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - USB_DM - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4 - // {PA_11, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1 - // {PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - USB_DP - // {PA_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 2, 0)}, // TIM4_CH2 - // {PA_12, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PA_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 3, 0)}, // TIM4_CH3 - // {PA_13, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - {PA_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2 - // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - // {PB_3, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - // {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - // {PB_4, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - {PB_4, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PB_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - {PB_5, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 - // {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - {PB_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 1, 0)}, // TIM8_CH1 - // {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - // {PB_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4 - {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - // {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N - {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - // {PB_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 2, 0)}, // TIM8_CH2 - // {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - // {PB_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 3, 0)}, // TIM8_CH3 - // {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N - {PF_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - // {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB_DP - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - // {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB_DM - {PA_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - // {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - // {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, // USB_DM - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - // {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, // USB_DP - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_USB)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF14_USB)}, // USB_DP - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** diff --git a/variants/STM32F3xx/PILL_F303XX/PinNamesVar.h b/variants/STM32F3xx/PILL_F303XX/PinNamesVar.h deleted file mode 100644 index 26f45e806e..0000000000 --- a/variants/STM32F3xx/PILL_F303XX/PinNamesVar.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = NC, -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = NC, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = NC, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = NC, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = NC, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = NC, -#endif -/* USB */ -#ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, -#endif \ No newline at end of file diff --git a/variants/STM32F3xx/PILL_F303XX/ldscript.ld b/variants/STM32F3xx/PILL_F303XX/ldscript.ld deleted file mode 100644 index 22cb8c3b6c..0000000000 --- a/variants/STM32F3xx/PILL_F303XX/ldscript.ld +++ /dev/null @@ -1,208 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F303CC Device with -** 256KByte FLASH, 40KByte RAM, 8KByte CCMRAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x2000A000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K -CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/variants/STM32F3xx/PILL_F303XX/variant_PILL_F303XX.h b/variants/STM32F3xx/PILL_F303XX/variant_PILL_F303XX.h deleted file mode 100644 index 34fe729dec..0000000000 --- a/variants/STM32F3xx/PILL_F303XX/variant_PILL_F303XX.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -// USB connector on the top, MCU side -// Left Side -#define PB9 0 -#define PB8 1 -#define PB7 2 -#define PB6 3 -#define PB5 4 -#define PB4 5 -#define PB3 6 -#define PA15 7 -#define PA12 8 // USB_DP -#define PA11 9 // USB_DM -#define PA10 10 -#define PA9 11 -#define PA8 12 -#define PB15 13 -#define PB14 14 -#define PB13 15 -#define PB12 16 -// Right side -#define PC13 17 // LED -#define PC14 18 -#define PC15 19 -#define PA0 A0 -#define PA1 A1 -#define PA2 A2 -#define PA3 A3 -#define PA4 A4 -#define PA5 A5 -#define PA6 A6 -#define PA7 A7 -#define PB0 A8 -#define PB1 A9 -#define PB10 30 -#define PB11 31 -// Other -#define PB2 32 // BOOT1 -#define PA13 33 // SWDI0 -#define PA14 34 // SWCLK - -// This must be a literal -#define NUM_DIGITAL_PINS 35 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 10 - -// On-board LED pin number -#define LED_BLUE PC13 -#define LED_BUILTIN LED_BLUE - -// SPI Definitions -#define PIN_SPI_SS PA4 -#define PIN_SPI_MOSI PA7 -#define PIN_SPI_MISO PA6 -#define PIN_SPI_SCK PA5 - -// I2C Definitions -#define PIN_WIRE_SDA PB7 -#define PIN_WIRE_SCL PB6 - -// Timer Definitions -// Use TIM6 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 -#define TIMER_SERVO TIM2 - -// UART Definitions -#define SERIAL_UART_INSTANCE 1 -// Default pin used for 'Serial' instance -// Mandatory for Firmata -#define PIN_SERIAL_RX PA10 -#define PIN_SERIAL_TX PA9 - -/* Extra HAL modules */ -#define HAL_DAC_MODULE_ENABLED - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial1 - #define SERIAL_PORT_USBVIRTUAL SerialUSB -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */ diff --git a/variants/STM32F3xx/SPARKY_F303CC/PeripheralPins.c b/variants/STM32F3xx/SPARKY_F303CC/PeripheralPins.c deleted file mode 100644 index bb6ae26499..0000000000 --- a/variants/STM32F3xx/SPARKY_F303CC/PeripheralPins.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2019, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - * Automatically generated from STM32F303C(B-C)Tx.xml - */ -#include "Arduino.h" -#include "PeripheralPins.h" - -/* ===== - * Note: Commented lines are alternative possibilities which are not used per default. - * If you change them, you will have to know what you do - * ===== - */ - -//*** ADC *** - -#ifdef HAL_ADC_MODULE_ENABLED -WEAK const PinMap PinMap_ADC[] = { - {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 - {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 - {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 - {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 - {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 - {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2 - {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3 - {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4 - {PB_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12 - {PB_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 - // {PB_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12 - // {PB_12, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC4_IN3 - // {PB_13, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - // {PB_14, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC4_IN4 - // {PB_15, ADC4, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC4_IN5 - {NC, NP, 0} -}; -#endif - -//*** DAC *** - -#ifdef HAL_DAC_MODULE_ENABLED -WEAK const PinMap PinMap_DAC[] = { - {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - {NC, NP, 0} -}; -#endif - -//*** I2C *** - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SDA[] = { - {PA_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_14, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - // {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // CAN_RX - {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_I2C_MODULE_ENABLED -WEAK const PinMap PinMap_I2C_SCL[] = { - {PA_9, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {PA_15, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, - // {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // CAN_TX - {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, - {NC, NP, 0} -}; -#endif - -//*** PWM *** - -#ifdef HAL_TIM_MODULE_ENABLED -WEAK const PinMap PinMap_PWM[] = { - {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - // {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 1)}, // TIM15_CH1N - {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 1, 0)}, // TIM15_CH1 - {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM15, 2, 0)}, // TIM15_CH2 - {PA_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - {PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - // {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - {PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 0)}, // TIM1_CH1 - // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 0)}, // TIM1_CH2 - SCL MPU-9150 - // {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 3, 0)}, // TIM2_CH3 - // {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 0)}, // TIM1_CH3 - SDA MPU-9150 - // {PA_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM2, 4, 0)}, // TIM2_CH4 - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - USB_DM - // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_TIM1, 4, 0)}, // TIM1_CH4 - // {PA_11, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 1, 0)}, // TIM4_CH1 - // {PA_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - USB_DP - // {PA_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 2, 0)}, // TIM4_CH2 - // {PA_12, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - {PA_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM4, 3, 0)}, // TIM4_CH3 - // {PA_13, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - {PA_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 2, 0)}, // TIM8_CH2 - // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - {PA_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM8, 1, 0)}, // TIM8_CH1 - // {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - // {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - // {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 3, 1)}, // TIM8_CH3N - {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - // {PB_3, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 1, 1)}, // TIM8_CH1N - // {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - // {PB_4, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM8, 2, 1)}, // TIM8_CH2N - LED_BLUE - // {PB_4, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - LED_RED - // {PB_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - // {PB_5, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM17, 1, 0)}, // TIM17_CH1 - // {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - {PB_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM8, 1, 0)}, // TIM8_CH1 - // {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N - // {PB_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM3, 4, 0)}, // TIM3_CH4 - {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - // {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N - // {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - CAN_RX - // {PB_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 2, 0)}, // TIM8_CH2 - // {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1 - // {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - CAN_TX - // {PB_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_TIM8, 3, 0)}, // TIM8_CH3 - // {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1 - {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 1, 1)}, // TIM1_CH1N - // {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 2, 1)}, // TIM1_CH2N - {PB_14, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 1, 0)}, // TIM15_CH1 - // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 3, 1)}, // TIM1_CH3N - // {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM15, 1, 1)}, // TIM15_CH1N - {PB_15, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM15, 2, 0)}, // TIM15_CH2 - {PC_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM1, 1, 1)}, // TIM1_CH1N - {PF_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM1, 3, 1)}, // TIM1_CH3N - {NC, NP, 0} -}; -#endif - -//*** SERIAL *** - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_TX[] = { - {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - // {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // SCL MPU-9150 - {PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RX[] = { - {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - // {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // SDA MPU-9150 - {PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - // {PB_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // LED_BLUE - {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, - {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_RTS[] = { - {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - // {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB_DP - {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_UART_MODULE_ENABLED -WEAK const PinMap PinMap_UART_CTS[] = { - {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, - // {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB_DM - {PA_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, - {NC, NP, 0} -}; -#endif - -//*** SPI *** - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MOSI[] = { - {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_MISO[] = { - {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SCLK[] = { - {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_SPI_MODULE_ENABLED -WEAK const PinMap PinMap_SPI_SSEL[] = { - {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - // {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - // {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, - {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, - {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, - {NC, NP, 0} -}; -#endif - -//*** CAN *** - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_RD[] = { - // {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, // USB_DM - {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -#ifdef HAL_CAN_MODULE_ENABLED -WEAK const PinMap PinMap_CAN_TD[] = { - // {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, // USB_DP - {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN)}, - {NC, NP, 0} -}; -#endif - -//*** No ETHERNET *** - -//*** No QUADSPI *** - -//*** USB *** - -#ifdef HAL_PCD_MODULE_ENABLED -WEAK const PinMap PinMap_USB[] = { - {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF14_USB)}, // USB_DM - {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF14_USB)}, // USB_DP - {NC, NP, 0} -}; -#endif - -//*** No USB_OTG_FS *** - -//*** No USB_OTG_HS *** \ No newline at end of file diff --git a/variants/STM32F3xx/SPARKY_F303CC/PinNamesVar.h b/variants/STM32F3xx/SPARKY_F303CC/PinNamesVar.h deleted file mode 100644 index 26f45e806e..0000000000 --- a/variants/STM32F3xx/SPARKY_F303CC/PinNamesVar.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SYS_WKUP */ -#ifdef PWR_WAKEUP_PIN1 - SYS_WKUP1 = PA_0, -#endif -#ifdef PWR_WAKEUP_PIN2 - SYS_WKUP2 = PC_13, -#endif -#ifdef PWR_WAKEUP_PIN3 - SYS_WKUP3 = NC, -#endif -#ifdef PWR_WAKEUP_PIN4 - SYS_WKUP4 = NC, -#endif -#ifdef PWR_WAKEUP_PIN5 - SYS_WKUP5 = NC, -#endif -#ifdef PWR_WAKEUP_PIN6 - SYS_WKUP6 = NC, -#endif -#ifdef PWR_WAKEUP_PIN7 - SYS_WKUP7 = NC, -#endif -#ifdef PWR_WAKEUP_PIN8 - SYS_WKUP8 = NC, -#endif -/* USB */ -#ifdef USBCON - USB_DM = PA_11, - USB_DP = PA_12, -#endif \ No newline at end of file diff --git a/variants/STM32F3xx/SPARKY_F303CC/ldscript.ld b/variants/STM32F3xx/SPARKY_F303CC/ldscript.ld deleted file mode 100644 index 22cb8c3b6c..0000000000 --- a/variants/STM32F3xx/SPARKY_F303CC/ldscript.ld +++ /dev/null @@ -1,208 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32F303CC Device with -** 256KByte FLASH, 40KByte RAM, 8KByte CCMRAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -***************************************************************************** -** @attention -** -**

© COPYRIGHT(c) 2014 Ac6

-** -** Redistribution and use in source and binary forms, with or without modification, -** are permitted provided that the following conditions are met: -** 1. Redistributions of source code must retain the above copyright notice, -** this list of conditions and the following disclaimer. -** 2. Redistributions in binary form must reproduce the above copyright notice, -** this list of conditions and the following disclaimer in the documentation -** and/or other materials provided with the distribution. -** 3. Neither the name of Ac6 nor the names of its contributors -** may be used to endorse or promote products derived from this software -** without specific prior written permission. -** -** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x2000A000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 40K -CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 8K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 256K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text ALIGN(4): - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - _siccmram = LOADADDR(.ccmram); - - /* CCM-RAM section - * - * IMPORTANT NOTE! - * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. - */ - .ccmram : - { - . = ALIGN(4); - _sccmram = .; /* create a global symbol at ccmram start */ - *(.ccmram) - *(.ccmram*) - - . = ALIGN(4); - _eccmram = .; /* create a global symbol at ccmram end */ - } >CCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/variants/STM32F3xx/SPARKY_F303CC/variant_SPARKY_F303CC.h b/variants/STM32F3xx/SPARKY_F303CC/variant_SPARKY_F303CC.h deleted file mode 100644 index 6e9575dab8..0000000000 --- a/variants/STM32F3xx/SPARKY_F303CC/variant_SPARKY_F303CC.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - ******************************************************************************* - * Copyright (c) 2018, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef _VARIANT_ARDUINO_STM32_ -#define _VARIANT_ARDUINO_STM32_ - -#ifdef __cplusplus -extern "C" { -#endif // __cplusplus - -/*---------------------------------------------------------------------------- - * Pins - *----------------------------------------------------------------------------*/ - -// USB connector on the top, MCU side -// Left Side -#define PB9 0 // CAN_TX -#define PB8 1 // CAN_RX -#define PB7 2 // UART1_RX or I2C1_SDC -#define PB6 3 // UART1_TX or I2C1_SCL -#define PB5 4 // LED_BLUE -#define PB4 5 // LED_RED -#define PB3 6 -#define PA15 7 -#define PA12 8 // USB_DP -#define PA11 9 // USB_DM -#define PA10 10 // SDA MPU-9150 -#define PA9 11 // SCL MPU-9150 -#define PA8 12 -#define PB15 13 -#define PB14 14 -#define PB13 15 -#define PB12 16 -// Right side -#define PC13 17 // LED on Bluepill Board -#define PC14 18 -#define PC15 19 -#define PA0 A0 -#define PA1 A1 -#define PA2 A2 -#define PA3 A3 // RCX -#define PA4 A4 -#define PA5 A5 -#define PA6 A6 -#define PA7 A7 -#define PB0 A8 -#define PB1 A9 -#define PB10 30 // UART3_TX -#define PB11 31 // UART3_RX -// Other -#define PB2 32 // BOOT1 -#define PA13 33 // SWDI0 -#define PA14 34 // SWCLK - -// This must be a literal -#define NUM_DIGITAL_PINS 35 -// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 10 - -// On-board LED pin number -#define LED_RED PB4 -#define LED_BLUE PB5 -#define LED_BUILTIN LED_BLUE - -// SPI Definitions -#define PIN_SPI_SS PA4 -#define PIN_SPI_MOSI PA7 -#define PIN_SPI_MISO PA6 -#define PIN_SPI_SCK PA5 - -// I2C Definitions -#define PIN_WIRE_SDA PA10 -#define PIN_WIRE_SCL PA9 - -// Timer Definitions -// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM6 - -#define TIMER_SERVO TIM7 - -// UART Definitions -#define SERIAL_UART_INSTANCE 3 -// Default pin used for 'Serial' instance -// Mandatory for Firmata -#define PIN_SERIAL_RX PB11 -#define PIN_SERIAL_TX PB10 - -/* Extra HAL modules */ -#define HAL_DAC_MODULE_ENABLED - -#ifdef __cplusplus -} // extern "C" -#endif -/*---------------------------------------------------------------------------- - * Arduino objects - C++ only - *----------------------------------------------------------------------------*/ - -#ifdef __cplusplus - // These serial port names are intended to allow libraries and architecture-neutral - // sketches to automatically default to the correct port name for a particular type - // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, - // the first hardware serial port whose RX/TX pins are not dedicated to another use. - // - // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor - // - // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial - // - // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library - // - // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. - // - // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX - // pins are NOT connected to anything by default. - #define SERIAL_PORT_MONITOR Serial - #define SERIAL_PORT_HARDWARE Serial3 -#endif - -#endif /* _VARIANT_ARDUINO_STM32_ */