Solenoid That suit your mount STL

[plains203]

Wondering if you can share what solenoids your mount was made for? I am not sure where to start looking for a suitable solenoid.

[geezacoleman]

We used the Goyen 3QH/3662 solenoid, though the standard aluminium base had been changed to have a Teejet nozzle body attachment on the base, for easy attachment of nozzles. We found them at Sprayerbarn (in Australia). Alternatively you can go down the path of Teejet nozzle bodies with diaphragms, clamps and replacing the diaphragm with a ChemSaver Check Valve. The low cost option is a $10-$20 12V solenoid from Ebay, but that would need its own mount designed.

Each has its own pros/cons and there are a whole range of ways of doing it (these are just some I've thought of), it just depends on what you're after.

[DaleKirby]

OWL spray parts SprayerBarn.pdf
Here's the parts list we used from sprayerbarn @plains203 @geezacoleman

[plains203]

Thanks. I had come across the Chemsaver Check Valve and Teejet body combo but the pictures of the setup you had, things looked more compact and neater.