Spooky Maze is simple game where ghost is located in the maze. The goal is to collect 100 coins. The ghost can find artifact "Walker" which allows him to pass throght the wall for limited period of time. The ghost can use dynamite to clear wall in the vicinity. The ghost can use also Teleport spell to move to random place in the maze. The Teleport spell requires some time to recharge. There are some not friendly spirits running around the maze, when collision occurs the ghost is teleported and loses five coins which are then send randomly back to the maze.
Binaries are available in GitHub Releases.
Binaries can be flashed by:
- GUI esp-helm
- CLI espflash
espflash write-bin 0x0 spooky-maze-esp-wrover-kit.bin
- Web browser (experimental) ESP-Launchpad.
Recommendation: Open only sub-directory with specific target with specific toolchain in CLion, because only one toolchain is supported for resolving code dependencies. Opening whole workspace works, just some code dependencies might not be resolved. This is also limitation of cargo, which supports only one toolchain per build.
Install espflash
which is required to flash and monitor the app on Embedded Device:
cargo install espflash
cargo install cargo-espflash
Enter the directory with project and build it:
cd esp-wrover-kit
cargo build --release
The script builds all possible targets: support/ci/build-esp32-firmware.sh
Open subdirectory with target in VS Code with installed Wokwi Extension. Select Wokwi: Start Simulator
.
cd wasm
npm install
npm run serve
Open in web browser: https://localhost:8443.
Note: https is required for access to accelerometer data - https://w3c.github.io/deviceorientation/#security-and-privacy . It's possible to run the app without accelerometer on http.
Each directory contains implementation specific for the HW.
Overview:
Name | Chip | Display | Controls | PMU | GPIO Expander |
---|---|---|---|---|---|
esp-wrover-kit | esp32 | ili9341 | 6 push-button controls, separate PINs | ||
esp32-c3-devkit-rust | esp32-c3 | st7789 | icm42670 accelerometer | ||
esp32-c3-lcdkit | esp32-c3 | gc9a01 | rotary encoder | ||
esp32-c6-devkit | esp32-c6 | ili9341 | resistor ladder with push buttons | ||
esp32-s2-kaluga | esp32-s2 | ili9341 | resistor ladder with push buttons | ||
esp32-s3-box | esp32-s3 | ili9342c | icm42670 accelerometer | ||
esp32-s3-box-lite | esp32-s3 | st7789 | no controls | ||
esp32-s3-usb-otg | esp32-s3 | st7789 | 5 push-buttons on the board | ||
m5stack-core2 | esp32 | ili9341 | mpu6886 accelerometer | axp192 | |
m5stack-cores32 | esp32-s3 | ili9342c | bmi279 accelerometer | axp2101 | aw9523 |
m5stack-fire | esp32 | ili9342c | mpu9250 accelerometer |
Control: IMU
- tilt the board to move the character
- move quickly up to teleport
- move quickly down to place dynamite and destroy walls around
cd esp32-s3-box
cargo run --release --monitor
Control: IMU
- tilt board to move character
cd esp32-c3-devkit-rust
cargo run --release --monitor
- Embedded Graphics
- Framebuffer
- Random maze generator
- IMU Accelerometer control
Control: keyboard
-
press arrows or W,A,S,D to move the character
-
press Enter to teleport
-
macOS prerequisites:
brew install SDL2
export LIBRARY_PATH="$LIBRARY_PATH:$(brew --prefix)/lib"
- OpenSUSE Linux prerequisites:
sudo zypper install SDL2-devel
- run:
cd desktop
cargo run
Control: buttons
- press button to move the character
- press up & down to teleport
- press ok & menu to place dynamite
cd esp32-s3-usb-otg
cargo run --release --monitor
HW: https://docs.makerfactory.io/m5stack/core/fire/
Control: MPU-9250, buttons
- tilt the board to move the character
- move quickly up or press button C to teleport
- move quickly down or press button B to place dynamite and destroy walls around
cd m5stack-fire
cargo run --release --monitor
- Open in GitPod.io
cd m5stack-fire
./run-wokwi.sh
- Wokwi project: https://wokwi.com/projects/350825213595746900
- Navigate to GitHub repository
- Click Open, select Codespaces tab, click Create Codespace
cd m5stack-fire
./run-wokwi.sh
Preview: install VS Code Wokwi plugin (private beta available on request)
cd m5stack-fire
cargo build --release --no-default-features --features "wokwi"
Press F1, select Wokwi: Start simulation
HW: https://shop.m5stack.com/products/m5stack-core2-esp32-iot-development-kit?variant=35960244109476
Control: MPU6886
- tilt the board to move the character
- move quickly up or press button C to teleport
- move quickly down or press button B to place dynamite and destroy walls around
cd m5stack-core2
cargo run --release --monitor
Control: buttons (partialy implemented based on of https://github.com/espressif/esp-bsp/blob/master/esp32_s2_kaluga_kit/esp32_s2_kaluga_kit.c#L59)
- more details https://github.com/espressif/esp-bsp/blob/master/esp32_s2_kaluga_kit/include/bsp/esp32_s2_kaluga_kit.h#L299
- K3-K6 to move the character
- (not supported) press K5 button to teleport
- (not supported) press K6 button to place dynamite
cd esp32-s2-kaluga
cargo run --release --monitor
Note for older version 1.2 - GPIO6 is used to control backlight.
Important: Requires espflash 2.x
- install with cargo install espflash --git https://github.com/esp-rs/espflash.git
Controls: not implemented
cd esp32-c6-devkit
cargo espflash flash --release --monitor
Control: 6 push buttons
- it's not possible to move the character
- press button Boot to teleport
cd esp-wrover-kit
cargo run --release --monitor
Following steps are useful for IDE integration, so that IDE can recognize which is your current target and fature set.
Check target
configurad in the file .cargo/config.toml
.
It should be one of following values:
target = "xtensa-esp32-none-elf"
target = "xtensa-esp32s2-none-elf"
target = "xtensa-esp32s3-none-elf"
target = "riscv32imac-unknown-none-elf"
If no value is selected, make sure to specify target on command line.
Check default features
in Cargo.toml
. Make sure that default set contains your board and display combinations.
If no value is selected, make sure to specify features on command line.