Skip to content

Latest commit

 

History

History
329 lines (211 loc) · 8.93 KB

INSTALL.txt

File metadata and controls

329 lines (211 loc) · 8.93 KB
Raw

Installation

This document describes how to install the FunkLoad tool.

.. toctree::

Quick installation guide for Debian and Ubuntu

With Debian Lenny or Ubuntu 8.10, 9.04, 10.04 ..., you can install the latest snapshot this way

sudo aptitude install python-dev python-setuptools \
     python-webunit python-docutils gnuplot
sudo aptitude install tcpwatch-httpproxy --without-recommends
sudo easy_install -f http://funkload.nuxeo.org/snapshots/ -U funkload

To install the latest stable release replace the last line with

sudo easy_install -U funkload

If you want to use the distributed mode (since 1.14.0) you need to install paramiko and virtualenv:

sudo aptitude install python-paramiko, python-virtualenv

That's all.

Note that Debian Squeeze, includes FunkLoad 0.13.0 package that can be installed this way:

sudo aptitude install python-webunit funkload

Quick installation guide for CentOS

As root

yum install python-setuptools python-docutils gnuplot python-devel make
wget http://funkload.nuxeo.org/3dparty/tcpwatch-1.3.tar.gz
tar xzvf tcpwatch-1.3.tar.gz
cd tcpwatch
python setup.py install
easy_install webunit
easy_install -f http://funkload.nuxeo.org/snapshots/ -U funkload

Installing on Mac

See http://pyfunc.blogspot.com/2011/12/installing-funkload-on-mac.html.

Installing on Windows

  • Install Python 2.7

  • Install Gnuplot

  • Install distutils (easy_install)

    easy_install docutils
easy_install webunit
# get http://funkload.nuxeo.org/3dparty/tcpwatch-1.3.zip
# unzip and run
python setup.py install
easy_install -f http://funkload.nuxeo.org/snapshots/ -U funkload

Other OS

Some parts are OS specific:

  • the monitor server works only on Linux
  • the credential server is a unix daemon but can run on windows if launched in debug mode (using startd instead of start)

Under windows there is a trick to install docutils (see below), you may also rename the scripts with a .py extension.

Required packages

  • libexpat1 (should not be required on recent OS)

  • funkload 1.14.0 requires python >= 2.5

  • python 2.4 is required by the test runner only if you want to launch python doctest, other stuff work fine with a python 2.3.5. python >= 2.5 are supported with funkload > 1.6.0

  • python distutils

  • python xml

  • EasyInstall, either use a package or download ez_setup.py, and run it:

    cd /tmp
wget http://peak.telecommunity.com/dist/ez_setup.py
sudo python ez_setup.py

    This will download and install the appropriate setuptools egg for your Python version.

Optional packages

  • To produce charts with FunkLoad >= 1.9.0: gnuplot 4.2, either use a package or visit the http://www.gnuplot.info/ site.

    gnuplot (or wgnuplot for win) must be in the executable path.

  • The recorder use TCPWatch which is not yet available using easy_install:

    cd /tmp
wget http://hathawaymix.org/Software/TCPWatch/tcpwatch-1.3.tar.gz
tar xzvf tcpwatch-1.3.tar.gz
cd tcpwatch
python setup.py build
sudo python setup.py install

Installation

Easy installation

  • Install the latest stable package:

    sudo easy_install -U funkload

    This will install FunkLoad, webunit and docutils eggs.

  • Install the latest snapshot version:

    sudo easy_install -f http://funkload.nuxeo.org/snapshots/ -U funkload

  • Install the development version

    If you want to try the latest unstable sources from git

    git clone git://github.com/nuxeo/FunkLoad.git

    then:

    cd FunkLoad/
python setup.py build
sudo python setup.py install

Installing without sudo power

Get the FunkLoad package from pypi: http://pypi.python.org/pypi/funkload/ or a snapshot from: http://funkload.nuxeo.org/snapshots/

Then use the buildout:

tar zxf funkload-1.14.0.tar.gz
cd funkload-1.14.0
python bootstrap.py
bin/buildout

Then your executable are ready on the bin directory.

Installing without network access

Transfer all the archives from http://funkload.nuxeo.org/3dparty/ in a directory:

mkdir -p /tmp/fl
cd /tmp/fl
wget -r -l1 -nd http://funkload.nuxeo.org/3dparty/

Transfer the latest FunkLoad package

# get setuptools package and untar
python setup.py install

easy_install docutils*
easy_install tcpwatch*
easy_install webunit*
easy_install funkload*

Test it

Install the FunkLoad examples:

fl-install-demo

Go to the demo/xmlrpc folder then:

cd funkload-demo/xmlrpc/
make test

To test benching and report building just:

make bench

See funkload-demo/README for others examples.

Problems ?

  • got a

    error: invalid Python installation: unable to open /usr/lib/python2.4/config/Makefile (No such file or directory)

    Install python2.4-dev package.

  • easy_install complains about conflict:

    ...
/usr/lib/site-python/docutils

Note: you can attempt this installation again with EasyInstall, and use
either the --delete-conflicting (-D) option or the
--ignore-conflicts-at-my-risk option, to either delete the above files
and directories, or to ignore the conflicts, respectively.  Note that if
you ignore the conflicts, the installed package(s) may not work.
-------------------------------------------------------------------------
error: Installation aborted due to conflicts

    If FunkLoad, webunit or docutils were previously installed without using EasyInstall. You need to reinstall the package that raises the conflict with the --delete-conflicting option, see easy_install documentation.

  • If you still have conflict try to remove FunkLoad from your system:

    easy_install -m funkload
rm -rf /usr/lib/python2.3/site-packages/funkload*
rm -rf /usr/local/funkload/
rm /usr/local/bin/fl-*
rm /usr/bin/fl-*

    then reinstall

  • easy_install ends with:

    error: Unexpected HTML page found at
http://prdownloads.sourceforge.net...

    Source Forge has changed their donwload page you need to update your setuptools:

    sudo easy_install -U setuptools

  • Failed to install docutils 0.4 with easy_install 0.6a9 getting a:

    ...
Best match: docutils 0.4
Downloading http://prdownloads.sourceforge.net/docutils/docutils-0.4.tar.gz?download
Requesting redirect to (randomly selected) 'mesh' mirror
error: No META HTTP-EQUIV="refresh" found in Sourceforge page at http://prdownloads.sourceforge.net/docutils/docutils-0.4.tar.gz?use_mirror=mesh

It looks like sourceforge change their download page again :(

  • When testing make test return

    ### credentialctl: Stopping credential server.
python: can't open file '/usr/lib/python2.4/site-packages/funkload-1.2.0-py2.4.egg/funkload/credentialctl.py': [Errno 20] Not a directory

    Starting with FunkLoad 1.2.0 scripts are installed in /usr/bin, previously they were in /usr/local/bin, you need to remove them:

    sudo rm /usr/local/bin/fl-*

  • While runing a test you got

    Traceback (most recent call last):
File "/usr/local/bin/fl-run-test", line 8, in <module>
  load_entry_point('funkload==1.11.0', 'console_scripts', 'fl-run-test')()
File "build/bdist.linux-i686/egg/funkload/TestRunner.py", line 478, in main
File "build/bdist.linux-i686/egg/funkload/TestRunner.py", line 337, in __init__
File "build/bdist.linux-i686/egg/funkload/TestRunner.py", line 347, in loadTests
File "/usr/lib/python2.6/doctest.py", line 2412, in DocFileSuite
  suite.addTest(DocFileTest(path, **kw))
File "/usr/lib/python2.6/doctest.py", line 2331, in DocFileTest
  doc, path = _load_testfile(path, package, module_relative)
File "/usr/lib/python2.6/doctest.py", line 219, in _load_testfile
  return open(filename).read(), filename
IOError: [Errno 2] No such file or directory: 'path/to/your/testcase'

    This means that your test file can not be loaded as a python module, (may be due to import error) FunkLoad then badly report it as an invalid doc test file.

    To view the original error just run the testcase using python instead of fl-run-test (python your_test_case.py).

    This is fixed since 1.14.