Bungee families: Articles with images added #8666

vv-monsalve · 2024-11-28T02:02:57Z

@emmamarichal This PR introduces Articles for all Bungee families to unify them, adapting them to the new format for the About section established in Bungee Tint.

No changes are made to the font binaries.

github-actions · 2024-11-28T02:05:37Z

FontBakery report

fontbakery version: 0.13.0a5

Check results

[20] Bungee-Regular.ttf

🔥 FAIL Check accent of Lcaron, dcaron, lcaron, tcaron

🔥 FAIL
dcaron uses component caroncmb.

[code: wrong-mark]
🔥 FAIL
tcaron uses component caroncmb.

[code: wrong-mark]
⚠️ WARN
Lcaron is decomposed and therefore could not be checked. Please check manually.

[code: decomposed-outline]
⚠️ WARN
lcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]

⚠️

WARN Check mark characters are in GDEF mark glyph class.

⚠️ WARN
The following mark characters could be in the GDEF mark glyph class:
horncmb (U+031B)

[code: mark-chars]

⚠️

WARN Check glyphs in mark glyph class are non-spacing.

⚠️ WARN
The following glyphs seem to be spacing (because they have width > 0 on the hmtx table) so they may be in the GDEF mark glyph class by mistake, or they should have zero width instead:
commaaccent (U+0326) and commaaccent (U+F6C3)

[code: spacing-mark-glyphs]

⚠️

WARN Check if each glyph has the recommended amount of contours.

⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: b	Contours detected: 3	Expected: 2


Glyph name: e	Contours detected: 1	Expected: 2


Glyph name: g	Contours detected: 1	Expected: 2 or 3


Glyph name: i	Contours detected: 1	Expected: 2


Glyph name: j	Contours detected: 1	Expected: 2


Glyph name: r	Contours detected: 2	Expected: 1


Glyph name: aring	Contours detected: 3	Expected: 4


Glyph name: ae	Contours detected: 2	Expected: 3


Glyph name: egrave	Contours detected: 2	Expected: 3


Glyph name: eacute	Contours detected: 2	Expected: 3


65 more.

Use -F or --full-lists to disable shortening of long lists.

[code: contour-count]

⚠️

WARN Are there caret positions declared for every ligature?

⚠️ WARN
This font lacks caret position values for ligature glyphs on its GDEF table.

[code: lacks-caret-pos]

⚠️

WARN Is there kerning info for non-ligated sequences?

⚠️ WARN
GPOS table lacks kerning info for the following non-ligated sequences:

- I.salt_v + I.salt_v

[code: lacks-kern-info]

⚠️

WARN Check math signs have the same width.

⚠️ WARN
The most common width is 734 among a set of 9 math glyphs.
The following math glyphs have a different width, though:

Width = 714: greater, greaterequal, less, lessequal

[code: width-outliers]

⚠️

WARN Check font contains no unreachable glyphs

⚠️ WARN
The following glyphs could not be reached by codepoint or substitution rules:

- Tcedilla

- breveacute

- brevegrave

- brevehookabove

- brevetilde

- circumflexacute

- circumflextilde

- commaaccentcmb

- periodcentered.v

- tcedilla

[code: unreachable-glyphs]

⚠️

WARN Check for codepoints not covered by METADATA subsets.

⚠️ WARN
The following codepoints supported by the font are not covered by
any subsets defined in the font's metadata file, and will never
be served. You can solve this by either manually adding additional
subset declarations to METADATA.pb, or by editing the glyphset
definitions.

U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: math, coptic, cherokee, tifinagh
U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh
U+0307 COMBINING DOT ABOVE: try adding one of: old-permic, coptic, malayalam, duployan, math, tifinagh, todhri, hebrew, canadian-aboriginal, tai-le, syriac
U+030A COMBINING RING ABOVE: try adding one of: syriac, duployan
U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee
U+030C COMBINING CARON: try adding one of: cherokee, tai-le
U+0312 COMBINING TURNED COMMA ABOVE: try adding math 527 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, vietnamese

[code: unreachable-subsetting]

⚠️

WARN Shapes languages in all GF glyphsets.

⚠️ WARN
GF_Phonetics_SinoExt glyphset:

WARN messages	Languages
Some auxiliary glyphs were missing: ſ	de_Latn (German) and fr_Latn (French)
Some auxiliary glyphs were missing: Ʒ, Ǥ, ǥ, Ǯ, ǯ, ʒ	fi_Latn (Finnish)

[code: warning-language-shaping]

⚠️

WARN Ensure dotted circle glyph is present and can attach marks.

⚠️ WARN
No dotted circle glyph present

[code: missing-dotted-circle]

⚠️

WARN Do outlines contain any jaggy segments?

⚠️ WARN
The following glyphs have jaggy segments:

* indexdownleft.outline (U+E142): L<<538.0,163.0>--<475.0,110.0>>/L<<475.0,110.0>--<477.0,111.0>> = 13.50783887527299

* indexdownright.outline (U+E143): L<<523.0,111.0>--<525.0,110.0>>/L<<525.0,110.0>--<462.0,163.0>> = 13.50783887527299

* indexupleft.outline (U+E144): L<<303.0,322.0>--<250.0,385.0>>/L<<250.0,385.0>--<251.0,383.0>> = 13.50783887527299

* indexupright.outline (U+E145): L<<749.0,383.0>--<750.0,385.0>>/L<<750.0,385.0>--<697.0,322.0>> = 13.50783887527299

* uni261E (U+261E): L<<611.0,262.0>--<611.0,262.0>>/L<<611.0,262.0>--<532.0,256.0>> = 4.3432399516893305

[code: found-jaggy-segments]

⚠️

WARN Do outlines contain any semi-vertical or semi-horizontal lines?

⚠️ WARN
The following glyphs have semi-vertical/semi-horizontal lines:

* M.v (U+FF4D): L<<179.0,36.0>--<183.0,684.0>>

* M.v (U+FF4D): L<<819.0,684.0>--<823.0,36.0>>

* asciicircum (U+005E): L<<202.0,171.0>--<70.0,172.0>>

* asciicircum (U+005E): L<<609.0,172.0>--<477.0,171.0>>

* ascript (U+0251): L<<675.0,530.0>--<677.0,36.0>>

[code: found-semi-vertical]

⚠️

WARN Ensure fonts have ScriptLangTags declared on the 'meta' table.

⚠️ WARN
This font file does not have a 'meta' table.

[code: lacks-meta-table]

ℹ️ INFO List all superfamily filepaths

ℹ️ INFO
ofl/bungee

[code: family-path]

ℹ️ INFO EPAR table present in font?

ℹ️ INFO
EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818

[code: lacks-EPAR]

ℹ️ INFO Show hinting filesize impact.

ℹ️ INFO
Hinting filesize impact:

	ofl/bungee/Bungee-Regular.ttf
Dehinted Size	116.2kb
Hinted Size	116.2kb
Increase	24 bytes
Change	0.0 %

[code: size-impact]

ℹ️ INFO Font contains all required tables?

ℹ️ INFO
This font contains the following optional tables:

- loca

- prep

- GPOS

- GSUB

- gasp

- vhea

- vmtx

[code: optional-tables]

ℹ️ INFO Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering?

ℹ️ INFO
These are the ppm ranges declared on the gasp table:

PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®

[code: ranges]

ℹ️ INFO Font has old ttfautohint applied?

ℹ️ INFO
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.000']

[code: version-not-detected]

[1] Family checks

ℹ️ INFO Check axis ordering on the STAT table.

ℹ️ INFO
All of the fonts lack a STAT table.

[code: summary]

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS	🔎 DEBUG
0	0	1	13	71	7	160	0
0%	0%	0%	5%	28%	3%	63%	0%

Note: The following loglevels were omitted in this report:

SKIP
PASS
DEBUG

github-actions · 2024-11-28T02:07:58Z

FontBakery report

fontbakery version: 0.13.0a5

Check results

[20] Bungee-Regular.ttf

🔥 FAIL Check accent of Lcaron, dcaron, lcaron, tcaron

🔥 FAIL
dcaron uses component caroncmb.

[code: wrong-mark]
🔥 FAIL
tcaron uses component caroncmb.

[code: wrong-mark]
⚠️ WARN
Lcaron is decomposed and therefore could not be checked. Please check manually.

[code: decomposed-outline]
⚠️ WARN
lcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]

⚠️

WARN Check mark characters are in GDEF mark glyph class.

⚠️ WARN
The following mark characters could be in the GDEF mark glyph class:
horncmb (U+031B)

[code: mark-chars]

⚠️

WARN Check glyphs in mark glyph class are non-spacing.

⚠️ WARN
The following glyphs seem to be spacing (because they have width > 0 on the hmtx table) so they may be in the GDEF mark glyph class by mistake, or they should have zero width instead:
commaaccent (U+0326) and commaaccent (U+F6C3)

[code: spacing-mark-glyphs]

⚠️

WARN Check if each glyph has the recommended amount of contours.

⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: b	Contours detected: 3	Expected: 2


Glyph name: e	Contours detected: 1	Expected: 2


Glyph name: g	Contours detected: 1	Expected: 2 or 3


Glyph name: i	Contours detected: 1	Expected: 2


Glyph name: j	Contours detected: 1	Expected: 2


Glyph name: r	Contours detected: 2	Expected: 1


Glyph name: aring	Contours detected: 3	Expected: 4


Glyph name: ae	Contours detected: 2	Expected: 3


Glyph name: egrave	Contours detected: 2	Expected: 3


Glyph name: eacute	Contours detected: 2	Expected: 3


65 more.

Use -F or --full-lists to disable shortening of long lists.

[code: contour-count]

⚠️

WARN Are there caret positions declared for every ligature?

⚠️ WARN
This font lacks caret position values for ligature glyphs on its GDEF table.

[code: lacks-caret-pos]

⚠️

WARN Is there kerning info for non-ligated sequences?

⚠️ WARN
GPOS table lacks kerning info for the following non-ligated sequences:

- I.salt_v + I.salt_v

[code: lacks-kern-info]

⚠️

WARN Check math signs have the same width.

⚠️ WARN
The most common width is 734 among a set of 9 math glyphs.
The following math glyphs have a different width, though:

Width = 714: greater, greaterequal, lessequal, less

[code: width-outliers]

⚠️

WARN Check font contains no unreachable glyphs

⚠️ WARN
The following glyphs could not be reached by codepoint or substitution rules:

- Tcedilla

- breveacute

- brevegrave

- brevehookabove

- brevetilde

- circumflexacute

- circumflextilde

- commaaccentcmb

- periodcentered.v

- tcedilla

[code: unreachable-glyphs]

⚠️

WARN Check for codepoints not covered by METADATA subsets.

⚠️ WARN
The following codepoints supported by the font are not covered by
any subsets defined in the font's metadata file, and will never
be served. You can solve this by either manually adding additional
subset declarations to METADATA.pb, or by editing the glyphset
definitions.

U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: coptic, cherokee, tifinagh, math
U+0306 COMBINING BREVE: try adding one of: tifinagh, old-permic
U+0307 COMBINING DOT ABOVE: try adding one of: duployan, tifinagh, old-permic, tai-le, math, syriac, hebrew, todhri, coptic, malayalam, canadian-aboriginal
U+030A COMBINING RING ABOVE: try adding one of: duployan, syriac
U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: cherokee, osage
U+030C COMBINING CARON: try adding one of: cherokee, tai-le
U+0312 COMBINING TURNED COMMA ABOVE: try adding math 527 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, vietnamese

[code: unreachable-subsetting]

⚠️

WARN Shapes languages in all GF glyphsets.

⚠️ WARN
GF_Phonetics_SinoExt glyphset:

WARN messages	Languages
Some auxiliary glyphs were missing: ſ	de_Latn (German) and fr_Latn (French)
Some auxiliary glyphs were missing: Ʒ, Ǥ, ǥ, Ǯ, ǯ, ʒ	fi_Latn (Finnish)

[code: warning-language-shaping]

⚠️

WARN Ensure dotted circle glyph is present and can attach marks.

⚠️ WARN
No dotted circle glyph present

[code: missing-dotted-circle]

⚠️

WARN Do outlines contain any jaggy segments?

⚠️ WARN
The following glyphs have jaggy segments:

* indexdownleft.outline (U+E142): L<<538.0,163.0>--<475.0,110.0>>/L<<475.0,110.0>--<477.0,111.0>> = 13.50783887527299

* indexdownright.outline (U+E143): L<<523.0,111.0>--<525.0,110.0>>/L<<525.0,110.0>--<462.0,163.0>> = 13.50783887527299

* indexupleft.outline (U+E144): L<<303.0,322.0>--<250.0,385.0>>/L<<250.0,385.0>--<251.0,383.0>> = 13.50783887527299

* indexupright.outline (U+E145): L<<749.0,383.0>--<750.0,385.0>>/L<<750.0,385.0>--<697.0,322.0>> = 13.50783887527299

* uni261E (U+261E): L<<611.0,262.0>--<611.0,262.0>>/L<<611.0,262.0>--<532.0,256.0>> = 4.3432399516893305

[code: found-jaggy-segments]

⚠️

WARN Do outlines contain any semi-vertical or semi-horizontal lines?

⚠️ WARN
The following glyphs have semi-vertical/semi-horizontal lines:

* M.v (U+FF4D): L<<179.0,36.0>--<183.0,684.0>>

* M.v (U+FF4D): L<<819.0,684.0>--<823.0,36.0>>

* asciicircum (U+005E): L<<202.0,171.0>--<70.0,172.0>>

* asciicircum (U+005E): L<<609.0,172.0>--<477.0,171.0>>

* ascript (U+0251): L<<675.0,530.0>--<677.0,36.0>>

[code: found-semi-vertical]

⚠️

WARN Ensure fonts have ScriptLangTags declared on the 'meta' table.

⚠️ WARN
This font file does not have a 'meta' table.

[code: lacks-meta-table]

ℹ️ INFO List all superfamily filepaths

ℹ️ INFO
ofl/bungee

[code: family-path]

ℹ️ INFO EPAR table present in font?

ℹ️ INFO
EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818

[code: lacks-EPAR]

ℹ️ INFO Show hinting filesize impact.

ℹ️ INFO
Hinting filesize impact:

	ofl/bungee/Bungee-Regular.ttf
Dehinted Size	116.2kb
Hinted Size	116.2kb
Increase	24 bytes
Change	0.0 %

[code: size-impact]

ℹ️ INFO Font contains all required tables?

ℹ️ INFO
This font contains the following optional tables:

- loca

- prep

- GPOS

- GSUB

- gasp

- vhea

- vmtx

[code: optional-tables]

ℹ️ INFO Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering?

ℹ️ INFO
These are the ppm ranges declared on the gasp table:

PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®

[code: ranges]

ℹ️ INFO Font has old ttfautohint applied?

ℹ️ INFO
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.000']

[code: version-not-detected]

[1] Family checks

ℹ️ INFO Check axis ordering on the STAT table.

ℹ️ INFO
All of the fonts lack a STAT table.

[code: summary]

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS	🔎 DEBUG
0	0	1	13	71	7	160	0
0%	0%	0%	5%	28%	3%	63%	0%

Note: The following loglevels were omitted in this report:

SKIP
PASS
DEBUG

github-actions · 2024-11-28T02:08:18Z

FontBakery report

fontbakery version: 0.13.0a5

Check results

[22] BungeeHairline-Regular.ttf

🔥 FAIL Check accent of Lcaron, dcaron, lcaron, tcaron

🔥 FAIL
dcaron uses component caroncmb.

[code: wrong-mark]
🔥 FAIL
tcaron uses component caroncmb.

[code: wrong-mark]
⚠️ WARN
Lcaron is decomposed and therefore could not be checked. Please check manually.

[code: decomposed-outline]
⚠️ WARN
lcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]

🔥 FAIL Check if each glyph has the recommended amount of contours.

🔥 FAIL
The following glyphs have no contours even though they were expected to have some:

- Glyph name: whiteuppointingtriangle	Expected: 2

- Glyph name: whiterightpointingtriangle	Expected: 2

- Glyph name: whitedownpointingtriangle	Expected: 2

- Glyph name: whiteleftpointingtriangle	Expected: 2

[code: no-contour]

⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: b	Contours detected: 3	Expected: 2


Glyph name: e	Contours detected: 1	Expected: 2


Glyph name: g	Contours detected: 1	Expected: 2 or 3


Glyph name: i	Contours detected: 1	Expected: 2


Glyph name: j	Contours detected: 1	Expected: 2


Glyph name: r	Contours detected: 2	Expected: 1


Glyph name: ae	Contours detected: 2	Expected: 3


Glyph name: egrave	Contours detected: 2	Expected: 3


Glyph name: eacute	Contours detected: 2	Expected: 3


Glyph name: ecircumflex	Contours detected: 2	Expected: 3


87 more.

Use -F or --full-lists to disable shortening of long lists.

[code: contour-count]

⚠️

WARN Check mark characters are in GDEF mark glyph class.

⚠️ WARN
The following mark characters could be in the GDEF mark glyph class:
horncmb (U+031B)

[code: mark-chars]

⚠️

WARN Check glyphs in mark glyph class are non-spacing.

⚠️ WARN
The following glyphs seem to be spacing (because they have width > 0 on the hmtx table) so they may be in the GDEF mark glyph class by mistake, or they should have zero width instead:
commaaccent (U+0326) and commaaccent (U+F6C3)

[code: spacing-mark-glyphs]

⚠️

WARN Are there caret positions declared for every ligature?

⚠️ WARN
This font lacks caret position values for ligature glyphs on its GDEF table.

[code: lacks-caret-pos]

⚠️

WARN Is there kerning info for non-ligated sequences?

⚠️ WARN
GPOS table lacks kerning info for the following non-ligated sequences:

- I.salt_v + I.salt_v

[code: lacks-kern-info]

⚠️

WARN Check math signs have the same width.

⚠️ WARN
The most common width is 734 among a set of 9 math glyphs.
The following math glyphs have a different width, though:

Width = 714: less, greaterequal, lessequal, greater

[code: width-outliers]

⚠️

WARN Check font contains no unreachable glyphs

⚠️ WARN
The following glyphs could not be reached by codepoint or substitution rules:

- Tcedilla

- breveacute

- brevegrave

- brevehookabove

- brevetilde

- circumflexacute

- circumflextilde

- commaaccentcmb

- periodcentered.v

- tcedilla

[code: unreachable-glyphs]

⚠️

WARN Check for codepoints not covered by METADATA subsets.

⚠️ WARN
The following codepoints supported by the font are not covered by
any subsets defined in the font's metadata file, and will never
be served. You can solve this by either manually adding additional
subset declarations to METADATA.pb, or by editing the glyphset
definitions.

U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: tifinagh, coptic, math, cherokee
U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh
U+0307 COMBINING DOT ABOVE: try adding one of: tai-le, malayalam, old-permic, tifinagh, coptic, syriac, math, todhri, duployan, canadian-aboriginal, hebrew
U+030A COMBINING RING ABOVE: try adding one of: duployan, syriac
U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee
U+030C COMBINING CARON: try adding one of: tai-le, cherokee
U+0312 COMBINING TURNED COMMA ABOVE: try adding math 527 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, vietnamese

[code: unreachable-subsetting]

⚠️

WARN Shapes languages in all GF glyphsets.

⚠️ WARN
GF_Phonetics_SinoExt glyphset:

WARN messages	Languages
Some auxiliary glyphs were missing: ſ	de_Latn (German) and fr_Latn (French)
Some auxiliary glyphs were missing: Ʒ, Ǥ, ǥ, Ǯ, ǯ, ʒ	fi_Latn (Finnish)

[code: warning-language-shaping]

⚠️

WARN Ensure dotted circle glyph is present and can attach marks.

⚠️ WARN
No dotted circle glyph present

[code: missing-dotted-circle]

⚠️

WARN Are there any misaligned on-curve points?

⚠️ WARN
The following glyphs have on-curve points which have potentially incorrect y coordinates:

* Eng (U+014A): X=445.0,Y=1.0 (should be at baseline 0?)

* summation (U+2211): X=514.0,Y=1.0 (should be at baseline 0?)

* summation (U+2211): X=180.0,Y=1.0 (should be at baseline 0?)

* integral (U+222B): X=105.0,Y=2.0 (should be at baseline 0?)

* integral (U+222B): X=359.0,Y=718.0 (should be at cap-height 720?)

* Aogonek.v (U+E192): X=636.0,Y=-1.0 (should be at baseline 0?)

* Eogonek.v (U+E1A0): X=625.0,Y=-1.0 (should be at baseline 0?)

* Iogonek.v (U+E1AE): X=626.0,Y=-1.0 (should be at baseline 0?)

* Eng.v (U+E1E9): X=563.0,Y=1.0 (should be at baseline 0?)

* Eogonek.salt_v (U+E1FF): X=625.0,Y=-1.0 (should be at baseline 0?)

* 5 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-misalignments]

⚠️

WARN Do any segments have colinear vectors?

⚠️ WARN
The following glyphs have colinear vectors:

* Abrevetilde (U+1EB4): L<<336.0,1115.0>--<364.0,1111.0>> -> L<<364.0,1111.0>--<380.0,1109.0>>

* Abrevetilde (U+1EB4): L<<378.0,1099.0>--<362.0,1101.0>> -> L<<362.0,1101.0>--<334.0,1105.0>>

* Acircumflextilde (U+1EAA): L<<336.0,1105.0>--<364.0,1101.0>> -> L<<364.0,1101.0>--<380.0,1099.0>>

* Acircumflextilde (U+1EAA): L<<378.0,1089.0>--<362.0,1091.0>> -> L<<362.0,1091.0>--<334.0,1095.0>>

* Atilde (U+00C3): L<<336.0,855.0>--<364.0,851.0>> -> L<<364.0,851.0>--<380.0,849.0>>

* Atilde (U+00C3): L<<378.0,839.0>--<362.0,841.0>> -> L<<362.0,841.0>--<334.0,845.0>>

* Atilde.salt (U+E104): L<<339.0,855.0>--<367.0,851.0>> -> L<<367.0,851.0>--<383.0,849.0>>

* Atilde.salt (U+E104): L<<381.0,839.0>--<365.0,841.0>> -> L<<365.0,841.0>--<337.0,845.0>>

* Atilde.salt_v (U+E1F1): L<<471.0,815.0>--<499.0,811.0>> -> L<<499.0,811.0>--<515.0,809.0>>

* Atilde.salt_v (U+E1F1): L<<513.0,799.0>--<497.0,801.0>> -> L<<497.0,801.0>--<469.0,805.0>>

* 86 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-colinear-vectors]

⚠️

WARN Do outlines contain any jaggy segments?

⚠️ WARN
The following glyphs have jaggy segments:

* indianrupee (U+20B9): B<<366.5,320.5>-<354.0,291.0>-<316.0,280.0>>/L<<316.0,280.0>--<340.0,281.0>> = 13.758394749894615

* indianrupee (U+20B9): L<<129.0,272.0>--<176.0,274.0>>/L<<176.0,274.0>--<129.0,274.0>> = 2.436648246810141

* indianrupee (U+20B9): L<<340.0,272.0>--<129.0,272.0>>/L<<129.0,272.0>--<176.0,274.0>> = 2.436648246810141

* onethird (U+2153): B<<997.5,291.0>-<990.0,271.0>-<957.0,264.0>>/L<<957.0,264.0>--<968.0,264.0>> = 11.976132444203333

* three (U+0033): B<<402.0,388.5>-<388.0,374.0>-<358.0,367.0>>/L<<358.0,367.0>--<374.0,367.0>> = 13.134022306396327

* three.sinf (U+2083): B<<312.5,291.0>-<305.0,271.0>-<272.0,264.0>>/L<<272.0,264.0>--<283.0,264.0>> = 11.976132444203333

* three.sups: B<<312.5,493.0>-<305.0,473.0>-<272.0,466.0>>/L<<272.0,466.0>--<283.0,466.0>> = 11.976132444203333

* three.v (U+FF13): B<<608.0,388.5>-<594.0,374.0>-<564.0,367.0>>/L<<564.0,367.0>--<580.0,367.0>> = 13.134022306396327

* threeeighths (U+215C): B<<312.5,493.0>-<305.0,473.0>-<272.0,466.0>>/L<<272.0,466.0>--<283.0,466.0>> = 11.976132444203333

* threequarters (U+00BE): B<<312.5,493.0>-<305.0,473.0>-<272.0,466.0>>/L<<272.0,466.0>--<283.0,466.0>> = 11.976132444203333

* threesuperior (U+00B3): B<<312.5,493.0>-<305.0,473.0>-<272.0,466.0>>/L<<272.0,466.0>--<283.0,466.0>> = 11.976132444203333

* twothirds (U+2154): B<<997.5,291.0>-<990.0,271.0>-<957.0,264.0>>/L<<957.0,264.0>--<968.0,264.0>> = 11.976132444203333

[code: found-jaggy-segments]

⚠️

WARN Do outlines contain any semi-vertical or semi-horizontal lines?

⚠️ WARN
The following glyphs have semi-vertical/semi-horizontal lines:

* M.v (U+FF4D): L<<277.0,90.0>--<279.0,599.0>>

* M.v (U+FF4D): L<<289.0,599.0>--<287.0,90.0>>

* M.v (U+FF4D): L<<705.0,90.0>--<703.0,599.0>>

* M.v (U+FF4D): L<<713.0,599.0>--<715.0,90.0>>

[code: found-semi-vertical]

⚠️

WARN Ensure fonts have ScriptLangTags declared on the 'meta' table.

⚠️ WARN
This font file does not have a 'meta' table.

[code: lacks-meta-table]

ℹ️ INFO List all superfamily filepaths

ℹ️ INFO
ofl/bungeehairline

[code: family-path]

ℹ️ INFO EPAR table present in font?

ℹ️ INFO
EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818

[code: lacks-EPAR]

ℹ️ INFO Show hinting filesize impact.

ℹ️ INFO
Hinting filesize impact:

	ofl/bungeehairline/BungeeHairline-Regular.ttf
Dehinted Size	102.2kb
Hinted Size	102.2kb
Increase	24 bytes
Change	0.0 %

[code: size-impact]

ℹ️ INFO Font contains all required tables?

ℹ️ INFO
This font contains the following optional tables:

- loca

- prep

- GPOS

- GSUB

- gasp

- vhea

- vmtx

[code: optional-tables]

ℹ️ INFO Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering?

ℹ️ INFO
These are the ppm ranges declared on the gasp table:

PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®

[code: ranges]

ℹ️ INFO Font has old ttfautohint applied?

ℹ️ INFO
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.000']

[code: version-not-detected]

[1] Family checks

ℹ️ INFO Check axis ordering on the STAT table.

ℹ️ INFO
All of the fonts lack a STAT table.

[code: summary]

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS	🔎 DEBUG
0	0	2	14	71	7	158	0
0%	0%	1%	6%	28%	3%	63%	0%

Note: The following loglevels were omitted in this report:

SKIP
PASS
DEBUG

github-actions · 2024-11-28T02:08:40Z

FontBakery report

fontbakery version: 0.13.0a5

Check results

[21] BungeeInline-Regular.ttf

🔥 FAIL Check accent of Lcaron, dcaron, lcaron, tcaron

🔥 FAIL
dcaron uses component caroncmb.

[code: wrong-mark]
🔥 FAIL
tcaron uses component caroncmb.

[code: wrong-mark]
⚠️ WARN
Lcaron is decomposed and therefore could not be checked. Please check manually.

[code: decomposed-outline]
⚠️ WARN
lcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]

⚠️

WARN Check mark characters are in GDEF mark glyph class.

⚠️ WARN
The following mark characters could be in the GDEF mark glyph class:
horncmb (U+031B)

[code: mark-chars]

⚠️

WARN Check glyphs in mark glyph class are non-spacing.

⚠️ WARN
The following glyphs seem to be spacing (because they have width > 0 on the hmtx table) so they may be in the GDEF mark glyph class by mistake, or they should have zero width instead:
commaaccent (U+0326) and commaaccent (U+F6C3)

[code: spacing-mark-glyphs]

⚠️

WARN Check if each glyph has the recommended amount of contours.

⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: exclam	Contours detected: 4	Expected: 2


Glyph name: quotedbl	Contours detected: 4	Expected: 2


Glyph name: numbersign	Contours detected: 4	Expected: 2


Glyph name: dollar	Contours detected: 2	Expected: 1, 3 or 5


Glyph name: percent	Contours detected: 10	Expected: 4 or 5


Glyph name: quotesingle	Contours detected: 2	Expected: 1


Glyph name: parenleft	Contours detected: 2	Expected: 1


Glyph name: parenright	Contours detected: 2	Expected: 1


Glyph name: asterisk	Contours detected: 2	Expected: 1 or 4


Glyph name: plus	Contours detected: 2	Expected: 1


937 more.

Use -F or --full-lists to disable shortening of long lists.

[code: contour-count]

⚠️

WARN Are there caret positions declared for every ligature?

⚠️ WARN
This font lacks caret position values for ligature glyphs on its GDEF table.

[code: lacks-caret-pos]

⚠️

WARN Is there kerning info for non-ligated sequences?

⚠️ WARN
GPOS table lacks kerning info for the following non-ligated sequences:

- I.salt_v + I.salt_v

[code: lacks-kern-info]

⚠️

WARN Check math signs have the same width.

⚠️ WARN
The most common width is 734 among a set of 9 math glyphs.
The following math glyphs have a different width, though:

Width = 714: greaterequal, greater, less, lessequal

[code: width-outliers]

⚠️

WARN Check there are no overlapping path segments

⚠️ WARN
The following glyphs have overlapping path segments:

* uni2B1B.semichevron_n (U+E187): L<<-20.0,15.0>--<-10.0,15.0>> has the same coordinates as a previous segment.

* uni2B1B.semichevron_n (U+E187): L<<1010.0,15.0>--<1020.0,15.0>> has the same coordinates as a previous segment.

* uni2B1B.semichevron_s (U+E188): L<<1020.0,705.0>--<1010.0,705.0>> has the same coordinates as a previous segment.

* uni2B1B.semichevron_s (U+E188): L<<-10.0,705.0>--<-20.0,705.0>> has the same coordinates as a previous segment.

[code: overlapping-path-segments]

⚠️

WARN Check font contains no unreachable glyphs

⚠️ WARN
The following glyphs could not be reached by codepoint or substitution rules:

- Tcedilla

- breveacute

- brevegrave

- brevehookabove

- brevetilde

- circumflexacute

- circumflextilde

- commaaccentcmb

- periodcentered.v

- tcedilla

[code: unreachable-glyphs]

⚠️

WARN Check for codepoints not covered by METADATA subsets.

⚠️ WARN
The following codepoints supported by the font are not covered by
any subsets defined in the font's metadata file, and will never
be served. You can solve this by either manually adding additional
subset declarations to METADATA.pb, or by editing the glyphset
definitions.

U+02D8 BREVE: try adding one of: canadian-aboriginal, yi
U+02D9 DOT ABOVE: try adding one of: canadian-aboriginal, yi
U+02DB OGONEK: try adding one of: canadian-aboriginal, yi
U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: tifinagh, cherokee, math, coptic
U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh
U+0307 COMBINING DOT ABOVE: try adding one of: syriac, duployan, todhri, canadian-aboriginal, malayalam, tai-le, coptic, hebrew, tifinagh, old-permic, math
U+030A COMBINING RING ABOVE: try adding one of: syriac, duployan
U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee
U+030C COMBINING CARON: try adding one of: cherokee, tai-le
U+0312 COMBINING TURNED COMMA ABOVE: try adding math 527 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, vietnamese

[code: unreachable-subsetting]

⚠️

WARN Shapes languages in all GF glyphsets.

⚠️ WARN
GF_Phonetics_SinoExt glyphset:

WARN messages	Languages
Some auxiliary glyphs were missing: ſ	de_Latn (German) and fr_Latn (French)
Some auxiliary glyphs were missing: Ʒ, Ǥ, ǥ, Ǯ, ǯ, ʒ	fi_Latn (Finnish)

[code: warning-language-shaping]

⚠️

WARN Ensure dotted circle glyph is present and can attach marks.

⚠️ WARN
No dotted circle glyph present

[code: missing-dotted-circle]

⚠️

WARN Do outlines contain any jaggy segments?

⚠️ WARN
The following glyphs have jaggy segments:

* indexdownleft.outline (U+E142): L<<538.0,163.0>--<475.0,110.0>>/L<<475.0,110.0>--<477.0,111.0>> = 13.50783887527299

* indexdownright.outline (U+E143): L<<523.0,111.0>--<525.0,110.0>>/L<<525.0,110.0>--<462.0,163.0>> = 13.50783887527299

* indexupleft.outline (U+E144): L<<303.0,322.0>--<250.0,385.0>>/L<<250.0,385.0>--<251.0,383.0>> = 13.50783887527299

* indexupright.outline (U+E145): L<<749.0,383.0>--<750.0,385.0>>/L<<750.0,385.0>--<697.0,322.0>> = 13.50783887527299

* indianrupee (U+20B9): L<<129.0,274.0>--<176.0,274.0>>/L<<176.0,274.0>--<129.0,272.0>> = 2.436648246810141

* indianrupee (U+20B9): L<<176.0,274.0>--<129.0,272.0>>/L<<129.0,272.0>--<340.0,272.0>> = 2.436648246810141

* indianrupee (U+20B9): L<<340.0,281.0>--<316.0,280.0>>/B<<316.0,280.0>-<354.0,291.0>-<366.5,320.5>> = 13.758394749894615

* onethird (U+2153): L<<968.0,264.0>--<957.0,264.0>>/B<<957.0,264.0>-<990.0,271.0>-<997.5,291.0>> = 11.976132444203333

* three (U+0033): L<<374.0,367.0>--<358.0,367.0>>/B<<358.0,367.0>-<388.0,374.0>-<402.0,388.5>> = 13.134022306396327

* three.sinf (U+2083): L<<283.0,264.0>--<272.0,264.0>>/B<<272.0,264.0>-<305.0,271.0>-<312.5,291.0>> = 11.976132444203333

* 7 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-jaggy-segments]

⚠️

WARN Do outlines contain any semi-vertical or semi-horizontal lines?

⚠️ WARN
The following glyphs have semi-vertical/semi-horizontal lines:

* M.v (U+FF4D): L<<179.0,36.0>--<183.0,684.0>>

* M.v (U+FF4D): L<<279.0,599.0>--<277.0,90.0>>

* M.v (U+FF4D): L<<287.0,90.0>--<289.0,599.0>>

* M.v (U+FF4D): L<<703.0,599.0>--<705.0,90.0>>

* M.v (U+FF4D): L<<715.0,90.0>--<713.0,599.0>>

* M.v (U+FF4D): L<<819.0,684.0>--<823.0,36.0>>

* asciicircum (U+005E): L<<202.0,171.0>--<70.0,172.0>>

* asciicircum (U+005E): L<<609.0,172.0>--<477.0,171.0>>

* ascript (U+0251): L<<675.0,530.0>--<677.0,36.0>>

[code: found-semi-vertical]

⚠️

WARN Ensure fonts have ScriptLangTags declared on the 'meta' table.

⚠️ WARN
This font file does not have a 'meta' table.

[code: lacks-meta-table]

ℹ️ INFO List all superfamily filepaths

ℹ️ INFO
ofl/bungeeinline

[code: family-path]

ℹ️ INFO EPAR table present in font?

ℹ️ INFO
EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818

[code: lacks-EPAR]

ℹ️ INFO Show hinting filesize impact.

ℹ️ INFO
Hinting filesize impact:

	ofl/bungeeinline/BungeeInline-Regular.ttf
Dehinted Size	148.8kb
Hinted Size	148.8kb
Increase	24 bytes
Change	0.0 %

[code: size-impact]

ℹ️ INFO Font contains all required tables?

ℹ️ INFO
This font contains the following optional tables:

- loca

- prep

- GPOS

- GSUB

- gasp

- vhea

- vmtx

[code: optional-tables]

ℹ️ INFO Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering?

ℹ️ INFO
These are the ppm ranges declared on the gasp table:

PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®

[code: ranges]

ℹ️ INFO Font has old ttfautohint applied?

ℹ️ INFO
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.000']

[code: version-not-detected]

[1] Family checks

ℹ️ INFO Check axis ordering on the STAT table.

ℹ️ INFO
All of the fonts lack a STAT table.

[code: summary]

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS	🔎 DEBUG
0	0	1	14	71	7	159	0
0%	0%	0%	6%	28%	3%	63%	0%

Note: The following loglevels were omitted in this report:

SKIP
PASS
DEBUG

github-actions · 2024-11-28T02:09:05Z

FontBakery report

fontbakery version: 0.13.0a5

Check results

[20] BungeeOutline-Regular.ttf

🔥 FAIL Check accent of Lcaron, dcaron, lcaron, tcaron

🔥 FAIL
dcaron uses component caroncmb.

[code: wrong-mark]
🔥 FAIL
tcaron uses component caroncmb.

[code: wrong-mark]
⚠️ WARN
Lcaron is decomposed and therefore could not be checked. Please check manually.

[code: decomposed-outline]
⚠️ WARN
lcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]

⚠️

WARN Check mark characters are in GDEF mark glyph class.

⚠️ WARN
The following mark characters could be in the GDEF mark glyph class:
horncmb (U+031B)

[code: mark-chars]

⚠️

WARN Check glyphs in mark glyph class are non-spacing.

⚠️ WARN
The following glyphs seem to be spacing (because they have width > 0 on the hmtx table) so they may be in the GDEF mark glyph class by mistake, or they should have zero width instead:
commaaccent (U+0326) and commaaccent (U+F6C3)

[code: spacing-mark-glyphs]

⚠️

WARN Check if each glyph has the recommended amount of contours.

⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: exclam	Contours detected: 6	Expected: 2


Glyph name: quotedbl	Contours detected: 6	Expected: 2


Glyph name: numbersign	Contours detected: 6	Expected: 2


Glyph name: percent	Contours detected: 15	Expected: 4 or 5


Glyph name: quotesingle	Contours detected: 3	Expected: 1


Glyph name: parenleft	Contours detected: 3	Expected: 1


Glyph name: parenright	Contours detected: 3	Expected: 1


Glyph name: asterisk	Contours detected: 3	Expected: 1 or 4


Glyph name: plus	Contours detected: 3	Expected: 1


Glyph name: comma	Contours detected: 3	Expected: 1


994 more.

Use -F or --full-lists to disable shortening of long lists.

[code: contour-count]

⚠️

WARN Are there caret positions declared for every ligature?

⚠️ WARN
This font lacks caret position values for ligature glyphs on its GDEF table.

[code: lacks-caret-pos]

⚠️

WARN Is there kerning info for non-ligated sequences?

⚠️ WARN
GPOS table lacks kerning info for the following non-ligated sequences:

- I.salt_v + I.salt_v

[code: lacks-kern-info]

⚠️

WARN Check math signs have the same width.

⚠️ WARN
The most common width is 734 among a set of 9 math glyphs.
The following math glyphs have a different width, though:

Width = 714: greaterequal, lessequal, less, greater

[code: width-outliers]

⚠️

WARN Check font contains no unreachable glyphs

⚠️ WARN
The following glyphs could not be reached by codepoint or substitution rules:

- Tcedilla

- breveacute

- brevegrave

- brevehookabove

- brevetilde

- circumflexacute

- circumflextilde

- commaaccentcmb

- periodcentered.v

- tcedilla

[code: unreachable-glyphs]

⚠️

WARN Check for codepoints not covered by METADATA subsets.

⚠️ WARN
The following codepoints supported by the font are not covered by
any subsets defined in the font's metadata file, and will never
be served. You can solve this by either manually adding additional
subset declarations to METADATA.pb, or by editing the glyphset
definitions.

U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: coptic, math, tifinagh, cherokee
U+0306 COMBINING BREVE: try adding one of: tifinagh, old-permic
U+0307 COMBINING DOT ABOVE: try adding one of: tifinagh, hebrew, math, coptic, syriac, tai-le, old-permic, canadian-aboriginal, todhri, duployan, malayalam
U+030A COMBINING RING ABOVE: try adding one of: duployan, syriac
U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: cherokee, osage
U+030C COMBINING CARON: try adding one of: tai-le, cherokee
U+0312 COMBINING TURNED COMMA ABOVE: try adding math 527 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, vietnamese

[code: unreachable-subsetting]

⚠️

WARN Shapes languages in all GF glyphsets.

⚠️ WARN
GF_Phonetics_SinoExt glyphset:

WARN messages	Languages
Some auxiliary glyphs were missing: ſ	de_Latn (German) and fr_Latn (French)
Some auxiliary glyphs were missing: Ʒ, Ǥ, ǥ, Ǯ, ǯ, ʒ	fi_Latn (Finnish)

[code: warning-language-shaping]

⚠️

WARN Ensure dotted circle glyph is present and can attach marks.

⚠️ WARN
No dotted circle glyph present

[code: missing-dotted-circle]

⚠️

WARN Do outlines contain any jaggy segments?

⚠️ WARN
The following glyphs have jaggy segments:

* Abrevetilde (U+1EB4): L<<347.0,1192.0>--<347.0,1192.0>>/B<<347.0,1192.0>-<307.0,1198.0>-<284.5,1200.0>> = 8.530765609948139

* Abrevetilde (U+1EB4): L<<364.0,1190.0>--<347.0,1192.0>>/L<<347.0,1192.0>--<347.0,1192.0>> = 6.709836807756896

* Acircumflextilde (U+1EAA): L<<347.0,1182.0>--<347.0,1182.0>>/B<<347.0,1182.0>-<307.0,1188.0>-<284.5,1190.0>> = 8.530765609948139

* Acircumflextilde (U+1EAA): L<<364.0,1180.0>--<347.0,1182.0>>/L<<347.0,1182.0>--<347.0,1182.0>> = 6.709836807756896

* Atilde (U+00C3): L<<347.0,932.0>--<347.0,932.0>>/B<<347.0,932.0>-<307.0,938.0>-<284.5,940.0>> = 8.530765609948139

* Atilde (U+00C3): L<<364.0,930.0>--<347.0,932.0>>/L<<347.0,932.0>--<347.0,932.0>> = 6.709836807756896

* Atilde.salt (U+E104): L<<350.0,932.0>--<350.0,932.0>>/B<<350.0,932.0>-<310.0,938.0>-<287.5,940.0>> = 8.530765609948139

* Atilde.salt (U+E104): L<<367.0,930.0>--<350.0,932.0>>/L<<350.0,932.0>--<350.0,932.0>> = 6.709836807756896

* Atilde.salt_v (U+E1F1): L<<482.0,892.0>--<482.0,892.0>>/B<<482.0,892.0>-<442.0,898.0>-<419.5,900.0>> = 8.530765609948139

* Atilde.salt_v (U+E1F1): L<<499.0,890.0>--<482.0,892.0>>/L<<482.0,892.0>--<482.0,892.0>> = 6.709836807756896

* 120 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-jaggy-segments]

⚠️

WARN Do outlines contain any semi-vertical or semi-horizontal lines?

⚠️ WARN
The following glyphs have semi-vertical/semi-horizontal lines:

* M.v (U+FF4D): L<<169.0,36.0>--<173.0,684.0>>

* M.v (U+FF4D): L<<183.0,684.0>--<179.0,36.0>>

* M.v (U+FF4D): L<<277.0,90.0>--<279.0,599.0>>

* M.v (U+FF4D): L<<289.0,599.0>--<287.0,90.0>>

* M.v (U+FF4D): L<<705.0,90.0>--<703.0,599.0>>

* M.v (U+FF4D): L<<713.0,599.0>--<715.0,90.0>>

* M.v (U+FF4D): L<<823.0,36.0>--<819.0,684.0>>

* M.v (U+FF4D): L<<829.0,684.0>--<833.0,36.0>>

* asciicircum (U+005E): L<<202.0,161.0>--<70.0,162.0>>

* asciicircum (U+005E): L<<477.0,171.0>--<609.0,172.0>>

* 4 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-semi-vertical]

⚠️

WARN Ensure fonts have ScriptLangTags declared on the 'meta' table.

⚠️ WARN
This font file does not have a 'meta' table.

[code: lacks-meta-table]

ℹ️ INFO List all superfamily filepaths

ℹ️ INFO
ofl/bungeeoutline

[code: family-path]

ℹ️ INFO EPAR table present in font?

ℹ️ INFO
EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818

[code: lacks-EPAR]

ℹ️ INFO Show hinting filesize impact.

ℹ️ INFO
Hinting filesize impact:

	ofl/bungeeoutline/BungeeOutline-Regular.ttf
Dehinted Size	197.4kb
Hinted Size	197.4kb
Increase	24 bytes
Change	0.0 %

[code: size-impact]

ℹ️ INFO Font contains all required tables?

ℹ️ INFO
This font contains the following optional tables:

- loca

- prep

- GPOS

- GSUB

- gasp

- vhea

- vmtx

[code: optional-tables]

ℹ️ INFO Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering?

ℹ️ INFO
These are the ppm ranges declared on the gasp table:

PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®

[code: ranges]

ℹ️ INFO Font has old ttfautohint applied?

ℹ️ INFO
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.000']

[code: version-not-detected]

[1] Family checks

ℹ️ INFO Check axis ordering on the STAT table.

ℹ️ INFO
All of the fonts lack a STAT table.

[code: summary]

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS	🔎 DEBUG
0	0	1	13	71	7	160	0
0%	0%	0%	5%	28%	3%	63%	0%

Note: The following loglevels were omitted in this report:

SKIP
PASS
DEBUG

github-actions · 2024-11-28T02:09:30Z

FontBakery report

fontbakery version: 0.13.0a5

Check results

[18] BungeeShade-Regular.ttf

🔥 FAIL Shapes languages in all GF glyphsets.

🔥 FAIL
GF_Phonetics_SinoExt glyphset:

FAIL messages	Languages
Shaper didn't attach acutecmb to j	nl_Latn (Dutch)
Shaper didn't attach acutecmb to J	nl_Latn (Dutch)

[code: failed-language-shaping]

⚠️ WARN
GF_Phonetics_SinoExt glyphset:

WARN messages	Languages
Some auxiliary glyphs were missing: ſ	de_Latn (German) and fr_Latn (French)
Some auxiliary glyphs were missing: Ʒ, Ǥ, ǥ, Ǯ, ǯ, ʒ	fi_Latn (Finnish)

[code: warning-language-shaping]

⚠️

WARN Check accent of Lcaron, dcaron, lcaron, tcaron

⚠️ WARN
Lcaron is decomposed and therefore could not be checked. Please check manually.

[code: decomposed-outline]
⚠️ WARN
dcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]
⚠️ WARN
lcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]
⚠️ WARN
tcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]

⚠️

WARN Check if each glyph has the recommended amount of contours.

⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: exclam	Contours detected: 5	Expected: 2


Glyph name: quotedbl	Contours detected: 5	Expected: 2


Glyph name: numbersign	Contours detected: 5	Expected: 2


Glyph name: percent	Contours detected: 11	Expected: 4 or 5


Glyph name: ampersand	Contours detected: 4	Expected: 1, 2 or 3


Glyph name: quotesingle	Contours detected: 3	Expected: 1


Glyph name: parenleft	Contours detected: 3	Expected: 1


Glyph name: parenright	Contours detected: 3	Expected: 1


Glyph name: asterisk	Contours detected: 3	Expected: 1 or 4


Glyph name: plus	Contours detected: 3	Expected: 1


993 more.

Use -F or --full-lists to disable shortening of long lists.

[code: contour-count]

⚠️

WARN Are there caret positions declared for every ligature?

⚠️ WARN
GDEF table is missing, but it is mandatory to declare it on fonts that provide ligature glyphs because the caret (text cursor) positioning for each ligature must be provided in this table.

[code: GDEF-missing]

⚠️

WARN Is there kerning info for non-ligated sequences?

⚠️ WARN
GPOS table lacks kerning info for the following non-ligated sequences:

- I.salt_v + I.salt_v

[code: lacks-kern-info]

⚠️

WARN Check math signs have the same width.

⚠️ WARN
The most common width is 834 among a set of 9 math glyphs.
The following math glyphs have a different width, though:

Width = 814: greaterequal, less, greater, lessequal

[code: width-outliers]

⚠️

WARN Check there are no overlapping path segments

⚠️ WARN
The following glyphs have overlapping path segments:

* uni261B.salt (U+E147): B<<529.0,10.0>-<528.0,7.0>-<524.0,7.0>> has the same coordinates as a previous segment.

* indexup.salt (U+E14B): L<<742.0,207.0>--<743.0,208.0>> has the same coordinates as a previous segment.

* uni2B1B.semichevron_n (U+E187): L<<1010.0,15.0>--<1020.0,15.0>> has the same coordinates as a previous segment.

* uni2B1B.semichevron_n (U+E187): L<<-20.0,15.0>--<-10.0,15.0>> has the same coordinates as a previous segment.

* uni2B1B.semichevron_s (U+E188): L<<-20.0,705.0>--<-10.0,705.0>> has the same coordinates as a previous segment.

* uni2B1B.semichevron_s (U+E188): L<<1020.0,705.0>--<1010.0,705.0>> has the same coordinates as a previous segment.

[code: overlapping-path-segments]

⚠️

WARN Check font contains no unreachable glyphs

⚠️ WARN
The following glyphs could not be reached by codepoint or substitution rules:

- Tcedilla

- acute.vert

- breveacute

- brevegrave

- brevehookabove

- brevetilde

- circumflexacute

- circumflexgrave

- circumflexhookabove

- circumflextilde

- 4 more.

Use -F or --full-lists to disable shortening of long lists.

[code: unreachable-glyphs]

⚠️

WARN Check for codepoints not covered by METADATA subsets.

⚠️ WARN
The following codepoints supported by the font are not covered by
any subsets defined in the font's metadata file, and will never
be served. You can solve this by either manually adding additional
subset declarations to METADATA.pb, or by editing the glyphset
definitions.

U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: coptic, tifinagh, math, cherokee
U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh
U+0307 COMBINING DOT ABOVE: try adding one of: hebrew, duployan, math, malayalam, coptic, canadian-aboriginal, todhri, tifinagh, tai-le, syriac, old-permic
U+030A COMBINING RING ABOVE: try adding one of: duployan, syriac
U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee
U+030C COMBINING CARON: try adding one of: tai-le, cherokee
U+0312 COMBINING TURNED COMMA ABOVE: try adding math 527 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, vietnamese

[code: unreachable-subsetting]

⚠️

WARN Do outlines contain any jaggy segments?

⚠️ WARN
The following glyphs have jaggy segments:

* Abreve (U+0102): L<<452.0,905.0>--<542.0,980.0>>/L<<542.0,980.0>--<541.0,979.0>> = 5.19442890773487

* Abreve.salt (U+E108): L<<455.0,905.0>--<545.0,980.0>>/L<<545.0,980.0>--<544.0,979.0>> = 5.19442890773487

* Abreve.salt_v (U+E1F5): L<<537.0,865.0>--<627.0,940.0>>/L<<627.0,940.0>--<626.0,939.0>> = 5.19442890773487

* Abreve.v (U+E191): L<<538.0,865.0>--<628.0,940.0>>/L<<628.0,940.0>--<627.0,939.0>> = 5.19442890773487

* Abrevedotbelow (U+1EB6): L<<452.0,905.0>--<542.0,980.0>>/L<<542.0,980.0>--<541.0,979.0>> = 5.19442890773487

* Abrevegrave (U+1EB0): L<<452.0,905.0>--<542.0,980.0>>/L<<542.0,980.0>--<541.0,979.0>> = 5.19442890773487

* Abrevetilde (U+1EB4): L<<462.0,1192.0>--<462.0,1192.0>>/B<<462.0,1192.0>-<422.0,1198.0>-<399.5,1200.0>> = 8.530765609948139

* Abrevetilde (U+1EB4): L<<479.0,1190.0>--<462.0,1192.0>>/L<<462.0,1192.0>--<462.0,1192.0>> = 6.709836807756896

* Acircumflex (U+00C2): L<<145.0,806.0>--<276.0,915.0>>/L<<276.0,915.0>--<275.0,914.0>> = 5.2374760668124445

* Acircumflex.salt (U+E103): L<<148.0,806.0>--<279.0,915.0>>/L<<279.0,915.0>--<278.0,914.0>> = 5.2374760668124445

* 262 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-jaggy-segments]

⚠️

WARN Do outlines contain any semi-vertical or semi-horizontal lines?

⚠️ WARN
The following glyphs have semi-vertical/semi-horizontal lines:

* M.v (U+FF4D): L<<105.0,-73.0>--<109.0,575.0>>

* M.v (U+FF4D): L<<248.0,684.0>--<244.0,36.0>>

* M.v (U+FF4D): L<<342.0,90.0>--<344.0,599.0>>

* M.v (U+FF4D): L<<354.0,599.0>--<352.0,90.0>>

* M.v (U+FF4D): L<<770.0,90.0>--<768.0,599.0>>

* M.v (U+FF4D): L<<778.0,599.0>--<780.0,90.0>>

* M.v (U+FF4D): L<<888.0,36.0>--<884.0,684.0>>

* M.v (U+FF4D): L<<894.0,684.0>--<898.0,36.0>>

* asciicircum (U+005E): L<<185.0,172.0>--<317.0,171.0>>

* asciicircum (U+005E): L<<188.0,52.0>--<56.0,53.0>>

* 4 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-semi-vertical]

⚠️

WARN Ensure fonts have ScriptLangTags declared on the 'meta' table.

⚠️ WARN
This font file does not have a 'meta' table.

[code: lacks-meta-table]

ℹ️ INFO List all superfamily filepaths

ℹ️ INFO
ofl/bungeeshade

[code: family-path]

ℹ️ INFO EPAR table present in font?

ℹ️ INFO
EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818

[code: lacks-EPAR]

ℹ️ INFO Show hinting filesize impact.

ℹ️ INFO
Hinting filesize impact:

	ofl/bungeeshade/BungeeShade-Regular.ttf
Dehinted Size	297.8kb
Hinted Size	297.8kb
Increase	24 bytes
Change	0.0 %

[code: size-impact]

ℹ️ INFO Font contains all required tables?

ℹ️ INFO
This font contains the following optional tables:

- loca

- prep

- GPOS

- GSUB

- gasp

- vhea

- vmtx

[code: optional-tables]

ℹ️ INFO Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering?

ℹ️ INFO
These are the ppm ranges declared on the gasp table:

PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®

[code: ranges]

ℹ️ INFO Font has old ttfautohint applied?

ℹ️ INFO
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.000']

[code: version-not-detected]

[1] Family checks

ℹ️ INFO Check axis ordering on the STAT table.

ℹ️ INFO
All of the fonts lack a STAT table.

[code: summary]

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS	🔎 DEBUG
0	0	1	11	75	7	158	0
0%	0%	0%	4%	30%	3%	63%	0%

Note: The following loglevels were omitted in this report:

SKIP
PASS
DEBUG

github-actions · 2024-11-28T02:09:56Z

FontBakery report

fontbakery version: 0.13.0a5

Check results

[21] BungeeSpice-Regular.ttf

🔥 FAIL Check accent of Lcaron, dcaron, lcaron, tcaron

🔥 FAIL
dcaron uses component caroncmb.

[code: wrong-mark]
🔥 FAIL
tcaron uses component caroncmb.

[code: wrong-mark]
⚠️ WARN
Lcaron is decomposed and therefore could not be checked. Please check manually.

[code: decomposed-outline]
⚠️ WARN
lcaron is composed of a single component and therefore could not be checked. Please check manually.

[code: single-component]

⚠️

WARN Check mark characters are in GDEF mark glyph class.

⚠️ WARN
The following mark characters could be in the GDEF mark glyph class:
horncmb (U+031B)

[code: mark-chars]

⚠️

WARN Check glyphs in mark glyph class are non-spacing.

⚠️ WARN
The following glyphs seem to be spacing (because they have width > 0 on the hmtx table) so they may be in the GDEF mark glyph class by mistake, or they should have zero width instead:
commaaccent (U+0326), commaaccent (U+F6C3) and commaaccent.inline (unencoded)

[code: spacing-mark-glyphs]

⚠️

WARN Check if each glyph has the recommended amount of contours.

⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: b	Contours detected: 3	Expected: 2


Glyph name: e	Contours detected: 1	Expected: 2


Glyph name: g	Contours detected: 1	Expected: 2 or 3


Glyph name: i	Contours detected: 1	Expected: 2


Glyph name: j	Contours detected: 1	Expected: 2


Glyph name: r	Contours detected: 2	Expected: 1


Glyph name: aring	Contours detected: 3	Expected: 4


Glyph name: ae	Contours detected: 2	Expected: 3


Glyph name: egrave	Contours detected: 2	Expected: 3


Glyph name: eacute	Contours detected: 2	Expected: 3


65 more.

Use -F or --full-lists to disable shortening of long lists.

[code: contour-count]

⚠️

WARN Ensure files are not too large.

⚠️ WARN
Font file is 1.4Mb; ideally it should be less than 1.0Mb

[code: large-font]

⚠️

WARN Are there caret positions declared for every ligature?

⚠️ WARN
This font lacks caret position values for ligature glyphs on its GDEF table.

[code: lacks-caret-pos]

⚠️

WARN Is there kerning info for non-ligated sequences?

⚠️ WARN
GPOS table lacks kerning info for the following non-ligated sequences:

- I.salt_v + I.salt_v

[code: lacks-kern-info]

⚠️

WARN Check math signs have the same width.

⚠️ WARN
The most common width is 734 among a set of 9 math glyphs.
The following math glyphs have a different width, though:

Width = 714: lessequal, less, greaterequal, greater

[code: width-outliers]

⚠️

WARN Glyph names are all valid?

⚠️ WARN
The following glyph names may be too long for some legacy systems which may expect a maximum 31-characters length limit:
blackdownpointingtriangle.inline, blackleftpointingtriangle.inline, blackrightpointingtriangle.inline, indexdownleft.salt_outline.inline, indexdownright.salt_outline.inline, indexupright.salt_outline.inline, whitedownpointingtriangle.inline, whiteleftpointingtriangle.inline and whiterightpointingtriangle.inline

[code: legacy-long-names]

⚠️

WARN Check for codepoints not covered by METADATA subsets.

⚠️ WARN
The following codepoints supported by the font are not covered by
any subsets defined in the font's metadata file, and will never
be served. You can solve this by either manually adding additional
subset declarations to METADATA.pb, or by editing the glyphset
definitions.

U+02D8 BREVE: try adding one of: canadian-aboriginal, yi
U+02D9 DOT ABOVE: try adding one of: canadian-aboriginal, yi
U+02DB OGONEK: try adding one of: canadian-aboriginal, yi
U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: tifinagh, cherokee, math, coptic
U+0306 COMBINING BREVE: try adding one of: tifinagh, old-permic
U+0307 COMBINING DOT ABOVE: try adding one of: tifinagh, hebrew, math, malayalam, old-permic, syriac, coptic, todhri, duployan, canadian-aboriginal, tai-le
U+030A COMBINING RING ABOVE: try adding one of: syriac, duployan
U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee
U+030C COMBINING CARON: try adding one of: cherokee, tai-le
U+0312 COMBINING TURNED COMMA ABOVE: try adding math 527 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, vietnamese

[code: unreachable-subsetting]

⚠️

WARN Shapes languages in all GF glyphsets.

⚠️ WARN
GF_Phonetics_SinoExt glyphset:

WARN messages	Languages
Some auxiliary glyphs were missing: ſ	de_Latn (German) and fr_Latn (French)
Some auxiliary glyphs were missing: Ʒ, Ǥ, ǥ, Ǯ, ǯ, ʒ	fi_Latn (Finnish)

[code: warning-language-shaping]

⚠️

WARN Ensure dotted circle glyph is present and can attach marks.

⚠️ WARN
No dotted circle glyph present

[code: missing-dotted-circle]

⚠️

WARN Do outlines contain any jaggy segments?

⚠️ WARN
The following glyphs have jaggy segments:

* indexdownleft.outline (U+E142): L<<538.0,163.0>--<475.0,110.0>>/L<<475.0,110.0>--<477.0,111.0>> = 13.50783887527299

* indexdownright.outline (U+E143): L<<523.0,111.0>--<525.0,110.0>>/L<<525.0,110.0>--<462.0,163.0>> = 13.50783887527299

* indexupleft.outline (U+E144): L<<303.0,322.0>--<250.0,385.0>>/L<<250.0,385.0>--<251.0,383.0>> = 13.50783887527299

* indexupright.outline (U+E145): L<<749.0,383.0>--<750.0,385.0>>/L<<750.0,385.0>--<697.0,322.0>> = 13.50783887527299

* indianrupee.inline: B<<366.5,320.5>-<354.0,291.0>-<316.0,280.0>>/L<<316.0,280.0>--<340.0,281.0>> = 13.758394749894615

* indianrupee.inline: L<<129.0,272.0>--<176.0,274.0>>/L<<176.0,274.0>--<129.0,274.0>> = 2.436648246810141

* indianrupee.inline: L<<340.0,272.0>--<129.0,272.0>>/L<<129.0,272.0>--<176.0,274.0>> = 2.436648246810141

* onethird.inline: B<<997.5,291.0>-<990.0,271.0>-<957.0,264.0>>/L<<957.0,264.0>--<968.0,264.0>> = 11.976132444203333

* three.inline: B<<402.0,388.5>-<388.0,374.0>-<358.0,367.0>>/L<<358.0,367.0>--<374.0,367.0>> = 13.134022306396327

* three.sinf.inline: B<<312.5,291.0>-<305.0,271.0>-<272.0,264.0>>/L<<272.0,264.0>--<283.0,264.0>> = 11.976132444203333

* 7 more.

Use -F or --full-lists to disable shortening of long lists.

[code: found-jaggy-segments]

⚠️

WARN Do outlines contain any semi-vertical or semi-horizontal lines?

⚠️ WARN
The following glyphs have semi-vertical/semi-horizontal lines:

* M.v (U+FF4D): L<<179.0,36.0>--<183.0,684.0>>

* M.v (U+FF4D): L<<819.0,684.0>--<823.0,36.0>>

* M.v.inline: L<<277.0,90.0>--<279.0,599.0>>

* M.v.inline: L<<289.0,599.0>--<287.0,90.0>>

* M.v.inline: L<<705.0,90.0>--<703.0,599.0>>

* M.v.inline: L<<713.0,599.0>--<715.0,90.0>>

* asciicircum (U+005E): L<<202.0,171.0>--<70.0,172.0>>

* asciicircum (U+005E): L<<609.0,172.0>--<477.0,171.0>>

* ascript (U+0251): L<<675.0,530.0>--<677.0,36.0>>

[code: found-semi-vertical]

⚠️

WARN Ensure fonts have ScriptLangTags declared on the 'meta' table.

⚠️ WARN
This font file does not have a 'meta' table.

[code: lacks-meta-table]

ℹ️ INFO List all superfamily filepaths

ℹ️ INFO
ofl/bungeespice

[code: family-path]

ℹ️ INFO EPAR table present in font?

ℹ️ INFO
EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818

[code: lacks-EPAR]

ℹ️ INFO Show hinting filesize impact.

ℹ️ INFO
Hinting filesize impact:

	ofl/bungeespice/BungeeSpice-Regular.ttf
Dehinted Size	1.4Mb
Hinted Size	1.4Mb
Increase	24 bytes
Change	0.0 %

[code: size-impact]

ℹ️ INFO Font contains all required tables?

ℹ️ INFO
This font contains the following optional tables:

- loca

- prep

- GPOS

- GSUB

- gasp

- vhea

- vmtx

[code: optional-tables]

ℹ️ INFO Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering?

ℹ️ INFO
These are the ppm ranges declared on the gasp table:

PPM <= 65535: flag = 0x0F - Use grid-fitting - Use grayscale rendering - Use gridfitting with ClearType symmetric smoothing - Use smoothing along multiple axes with ClearType®

[code: ranges]

ℹ️ INFO Font has old ttfautohint applied?

ℹ️ INFO
Could not detect which version of ttfautohint was used in this font. It is typically specified as a comment in the font version entries of the 'name' table. Such font version strings are currently: ['Version 2.000']

[code: version-not-detected]

[1] Family checks

ℹ️ INFO Check axis ordering on the STAT table.

ℹ️ INFO
All of the fonts lack a STAT table.

[code: summary]

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS	🔎 DEBUG
0	0	1	14	73	7	157	0
0%	0%	0%	6%	29%	3%	62%	0%

Note: The following loglevels were omitted in this report:

SKIP
PASS
DEBUG

vv-monsalve added 6 commits November 27, 2024 20:44

Bungee article with images added

e920b5c

Bungee Hairline article with images added

a38c790

Bungee Inline article with images added

4e8b90f

Bungee Outline article with images added

decf00f

Bungee Shade article with images added

5f528c2

Bungee Spice article with images added

703a225

vv-monsalve added the I Article/Description label Nov 28, 2024

vv-monsalve requested a review from emmamarichal November 28, 2024 02:02

Bungee article formatting small fix

436b416

emmamarichal approved these changes Nov 28, 2024

View reviewed changes

emmamarichal merged commit d07310c into main Nov 28, 2024
8 checks passed

emmamarichal deleted the bungee-articles-fix branch November 28, 2024 08:05

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Bungee families: Articles with images added #8666

Bungee families: Articles with images added #8666

vv-monsalve commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

Bungee families: Articles with images added #8666

Bungee families: Articles with images added #8666

Conversation

vv-monsalve commented Nov 28, 2024

github-actions bot commented Nov 28, 2024

FontBakery report

Check results

Summary

github-actions bot commented Nov 28, 2024

FontBakery report

Check results

Summary

github-actions bot commented Nov 28, 2024

FontBakery report

Check results

Summary

github-actions bot commented Nov 28, 2024

FontBakery report

Check results

Summary

github-actions bot commented Nov 28, 2024

FontBakery report

Check results

Summary

github-actions bot commented Nov 28, 2024

FontBakery report

Check results

Summary

github-actions bot commented Nov 28, 2024

FontBakery report

Check results

Summary