Skip to content

Latest commit

 

History

History
129 lines (90 loc) · 6.71 KB

buildAndProgram.md

File metadata and controls

129 lines (90 loc) · 6.71 KB
Raw

Build

Dependencies

To build this project, you'll need:

  • A cross-compiler : ARM-GCC (10.3-2021.10)
  • The NRF52 SDK 15.3.0 : nRF-SDK v15.3.0
  • The Python 3 modules cbor, intelhex, click and cryptography modules for the mcuboot tool (see requirements.txt)
    • To keep the system clean, you can install python modules into a python virtual environment (venv) 
      python -m venv .venv
source .venv/bin/activate
python -m pip install wheel
python -m pip install -r tools/mcuboot/requirements.txt
  • A reasonably recent version of CMake (I use 3.16.5)
  • lv_font_conv, to generate the font .c files
    • see lv_font_conv
    • install npm (commonly done via the package manager, ensure node's version is at least 12)
    • install lv_font_conv: npm install lv_font_conv

Build steps

Clone the repo

git clone https://github.com/InfiniTimeOrg/InfiniTime.git
cd InfiniTime
git submodule update --init
mkdir build
cd build

Project generation using CMake

CMake configures the project according to variables you specify the command line. The variables are:

Variable Description Example
ARM_NONE_EABI_TOOLCHAIN_PATH path to the toolchain directory -DARM_NONE_EABI_TOOLCHAIN_PATH=/home/jf/nrf52/gcc-arm-none-eabi-10.3-2021.10/
NRF5_SDK_PATH path to the NRF52 SDK -DNRF5_SDK_PATH=/home/jf/nrf52/Pinetime/sdk
CMAKE_BUILD_TYPE (*) Build type (Release or Debug). Release is applied by default if this variable is not specified. -DCMAKE_BUILD_TYPE=Debug
BUILD_DFU (**) Build DFU files while building (needs adafruit-nrfutil). -DBUILD_DFU=1
BUILD_RESOURCES (**) Generate external resource while building (needs lv_font_conv and lv_img_conv. -DBUILD_RESOURCES=1
TARGET_DEVICE Target device, used for hardware configuration. Allowed: PINETIME, MOY-TFK5, MOY-TIN5, MOY-TON5, MOY-UNK -DTARGET_DEVICE=PINETIME (Default)

(*) Note about CMAKE_BUILD_TYPE

By default, this variable is set to Release. It compiles the code with size and speed optimizations. We use this value for all the binaries we publish when we release new versions of InfiniTime.

The Debug mode disables all optimizations, which makes the code easier to debug. However, the binary size will likely be too big to fit in the internal flash memory. If you want to build and debug a Debug binary, you'll need to disable some parts of the code. For example, the icons for the Navigation app use a lot of memory space. You can comment the content of m_iconMap in the Navigation application to free some memory.

(**) Note about BUILD_DFU

DFU files are the files you'll need to install your build of InfiniTime using OTA (over-the-air) mechanism. To generate the DFU file, the Python tool adafruit-nrfutil is needed on your system. Check that this tool is properly installed before enabling this option.

CMake command

cmake -DARM_NONE_EABI_TOOLCHAIN_PATH=... -DNRF5_SDK_PATH=...

Build the project

During the project generation, CMake created the following targets:

  • pinetime-app : build the standalone (without bootloader support) version of the firmware.
  • pinetime-recovery : build the standalone recovery version of infinitime (light firmware that only supports OTA and basic UI)
  • pinetime-recovery-loader : build the standalone tool that flashes the recovery firmware into the external SPI flash
  • pinetime-mcuboot-app : build the firmware with the support of the bootloader (based on MCUBoot).
  • pinetime-mcuboot-recovery : build pinetime-recovery with bootloader support
  • pinetime-mcuboot-recovery-loader : build pinetime-recovery-loader with bootloader support

If you just want to build the project and run it on the Pinetime, using pinetime-app is recommended. See this page for more info about bootloader support.

Build:

make -j pinetime-app

List of files generated: Binary files are generated into the folder src:

  • pinetime-app.bin, .hex and .out : standalone firmware in bin, hex and out formats.
  • pinetime-app.map : map file
  • pinetime-mcuboot-app.bin, .hex and .out : firmware with bootloader support in bin, hex and out formats.
  • pinetime-mcuboot-app.map : map file
  • pinetime-mcuboot-app-image : MCUBoot image of the firmware
  • pinetime-mcuboot-ap-dfu : DFU file of the firmware

The same files are generated for pinetime-recovery and pinetime-recoveryloader

How to generate files needed by the factory

These files are needed by the Pine64 factory to flash InfiniTime as the default firmware on the PineTimes.

Two files are needed: an HEX (.hex) file that contains the content of the internal flash memory (bootloader + InfiniTime) and a binary (.bin) file that contains the content of the external flash memory (recovery firmware).

merged-internal.hex

First, convert the bootloader to hex:

<ARM TOOLCHAIN>/bin/arm-none-eabi-objcopy -I binary -O ihex ./bootloader.bin ./bootloader.hex

where bootloader.bin is the last stable version of the bootloader.

Then, convert the MCUBoot image of InfiniTime:

<ARM TOOLCHAIN>/bin/arm-none-eabi-objcopy -I binary -O ihex --change-addresses 0x8000 ./pinetime-mcuboot-app-image-1.6.0.bin ./pinetime-mcuboot-app-image-1.6.0.hex

where pinetime-mcuboot-app-image-1.6.0.bin is the bin of the last MCUBoot image of InfiniTime.

Pay attention to the parameter --change-addresses 0x8000. It's needed to ensure the image will be flashed at the offset expected by the bootloader (0x8000).

Finally, merge them together with mergehex:

/opt/mergehex/mergehex -m ./bootloader.hex ./pinetime-mcuboot-app-image-1.6.0.hex  -o merged-internal.hex

This file must be flashed at offset 0x00 of the internal memory of the NRF52832.

spinor.bin

This file is the MCUBoot image of the last stable version of the recovery firmware. It must be flashed at offset 0x00 of the external SPINOR flash memory.