diff --git a/ingress-gateway/ig-bridge-demo.nomad b/ingress-gateway/ig-bridge-demo.nomad
new file mode 100644
index 0000000..785ef1f
--- /dev/null
+++ b/ingress-gateway/ig-bridge-demo.nomad
@@ -0,0 +1,97 @@
+job "ig-bridge-demo" {
+
+  datacenters = ["dc1"]
+
+  # This group will have a task providing the ingress gateway automatically
+  # created by Nomad. The ingress gateway is based on the Envoy proxy being
+  # managed by the docker driver.
+  group "ingress-group" {
+
+    network {
+      mode = "bridge"
+
+      # This example will enable plain HTTP traffic to access the uuid-api connect
+      # native example service on port 8080.
+      port "inbound" {
+        static = 8080
+        to     = 8080
+      }
+    }
+
+    service {
+      name = "my-ingress-service"
+      port = "8080"
+
+      connect {
+        gateway {
+
+          # Consul gateway [envoy] proxy options.
+          proxy {
+            # The following options are automatically set by Nomad if not
+            # explicitly configured when using bridge networking.
+            #
+            # envoy_gateway_no_default_bind = true
+            # envoy_gateway_bind_addresses "uuid-api" {
+            #   address = "0.0.0.0"
+            #   port    = <associated listener.port>
+            # }
+            #
+            # Additional options are documented at
+            # https://www.nomadproject.io/docs/job-specification/gateway#proxy-parameters
+          }
+
+          # Consul Ingress Gateway Configuration Entry.
+          ingress {
+            # Nomad will automatically manage the Configuration Entry in Consul
+            # given the parameters in the ingress block.
+            #
+            # Additional options are documented at
+            # https://www.nomadproject.io/docs/job-specification/gateway#ingress-parameters
+            listener {
+              port     = 8080
+              protocol = "tcp"
+              service {
+                name = "uuid-api"
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+
+  # The UUID generator from the connect-native demo is used as an example service.
+  # The ingress gateway above makes access to the service possible over normal HTTP.
+  # For example,
+  #
+  # $ curl $(dig +short @127.0.0.1 -p 8600 uuid-api.ingress.dc1.consul. ANY):8080
+  group "generator" {
+    network {
+      mode = "host"
+      port "api" {}
+    }
+
+    service {
+      name = "uuid-api"
+      port = "${NOMAD_PORT_api}"
+
+      connect {
+        native = true
+      }
+    }
+
+    task "generate" {
+      driver = "docker"
+
+      config {
+        image        = "hashicorpnomad/uuid-api:v3"
+        network_mode = "host"
+      }
+
+      env {
+        BIND = "0.0.0.0"
+        PORT = "${NOMAD_PORT_api}"
+      }
+    }
+  }
+}
diff --git a/ingress-gateway/ig-demo.nomad b/ingress-gateway/ig-demo.nomad
new file mode 100644
index 0000000..1549549
--- /dev/null
+++ b/ingress-gateway/ig-demo.nomad
@@ -0,0 +1,100 @@
+job "ig-demo" {
+
+  datacenters = ["dc1"]
+
+  # This group will have a task providing the ingress gateway automatically
+  # created by Nomad. The ingress gateway is based on the Envoy proxy being
+  # managed by the docker driver.
+  group "ingress-group" {
+
+    network {
+      mode = "host"
+
+      # This example will enable plain HTTP traffic to access the uuid-api connect
+      # native example service on port 8080.
+      port "inbound" {
+        static = 8080
+      }
+
+      # When running an ingress gateway in host networking mode, the underlying
+      # Envoy proxy creates an admin interface listener bound to localhost that
+      # requires the allocation of a port.
+      port "envoy" {
+        static = 19001
+      }
+    }
+
+    service {
+      name = "my-ingress-service"
+
+      # The Envoy proxy admin interface listener will use the service port to
+      # determine its localhost bind address.
+      port = "envoy"
+
+      connect {
+        gateway {
+
+          # Consul gateway [envoy] proxy options.
+          proxy {
+            # Envoy proxy options are documented at
+            # https://www.nomadproject.io/docs/job-specification/gateway#proxy-parameters
+            connect_timeout = "500ms"
+          }
+
+          # Consul Ingress Gateway Configuration Entry.
+          ingress {
+            # Nomad will automatically manage the Configuration Entry in Consul
+            # given the parameters in the ingress block.
+            #
+            # Additional options are documented at
+            # https://www.nomadproject.io/docs/job-specification/gateway#ingress-parameters
+            listener {
+              port     = 8080
+              protocol = "tcp"
+              service {
+                name = "uuid-api"
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+
+  # The UUID generator from the connect-native demo is used as an example service.
+  # The ingress gateway above makes access to the service possible over normal HTTP.
+  # For example,
+  #
+  # $ curl $(dig +short @127.0.0.1 -p 8600 uuid-api.ingress.dc1.consul. ANY):8080
+  group "generator" {
+    network {
+      mode = "host"
+      port "api" {
+        to = -1
+      }
+    }
+
+    service {
+      name = "uuid-api"
+      port = "${NOMAD_PORT_api}"
+
+      connect {
+        native = true
+      }
+    }
+
+    task "generate" {
+      driver = "docker"
+
+      config {
+        image        = "hashicorpnomad/uuid-api:v3"
+        network_mode = "host"
+      }
+
+      env {
+        BIND = "0.0.0.0"
+        PORT = "${NOMAD_PORT_api}"
+      }
+    }
+  }
+}