Nulleinspeisung heftige Überschwinger bei Lastwechsel #1592

dk7td · 2025-01-29T15:01:29Z

dk7td
Jan 29, 2025

Hallo zusammen,

bei meiner Nulleinspeisung aus einem Zendure PV-Hub1200 in einen Hoymiles HM-800 habe ich in letzter Zeit bei Lastwechseln (z.B. Wasserkocher, Fußbodenheizung elektrisch) ein paar heftige Überschwinger beobachtet. Kennt jemand sowas?

Meine Powerlimiter-Einstellungen sehen so aus:

Was könnte die Ursache dafür sein?

Danke und Grüße,
Didi

schlimmchen · 2025-01-30T08:06:52Z

schlimmchen
Jan 30, 2025
Maintainer

Also dass du Strom exportierst für einen kurzen Moment wenn du viel Leistung durch die WR produzieren lässt und dann plötzlich starke Stromverbraucher abschaltest, das musst du akzeptieren.

Was ist jetzt schlechter als vorher? Was war vorher (für eine Firmwareversion). Was sind deine Einstellungen? Was steht im ausführlichen Log vom DPL, während das Problem besteht?

7 replies

dk7td Jan 30, 2025
Author

Normal ist das definitiv nicht ...

Sorbat Jan 30, 2025

Ich hatte das usb log ausgeben lassen und gleichzeitig die live Ansicht geöffnet, das ganze mit osb aufgenommen, sodass ich das hinterher halbwegs zuordnen konnte. Vielleicht wäre das ja für dich auch eine Option

dk7td Jan 30, 2025
Author

Danke für den Hinweis. Muß ich mir man anschauen, wie ich das hinbekomme.

dk7td Jan 30, 2025
Author

So, jetzt hab ich zumindest mal eine kurze, heftige Schwankung einfangen können:

Und der Logauszug dazu:

18:04:19.835 > [DPL inverter 114190550241]:
18:04:19.946 > solar-powered, producing 236 W
18:04:20.250 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:20.349 > sending commands enabled, reachable, eligible
18:04:20.597 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:20.610 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:20.617 > MPPTs AC power: a: 119 W b: 118 W
18:04:20.625 > RX Period End
18:04:20.756 > All missing
18:04:20.827 > Nothing received, resend whole request
18:04:20.880 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 F0 00 00 00 00 00 00 00 00 6E 14 4F
18:04:20.929 > [DPL] targeting 0 W, base load is 100 W, power meter reads -0.2 W (valid)
18:04:20.987 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:21.046 > [DPL] requesting 236 W from 1 solar-powered inverter currently producing 236 W (diff 0 W, hysteresis 10 W)
18:04:21.094 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:21.151 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:21.269 > [DPL inverter 114190550241]:
18:04:21.321 > solar-powered, producing 236 W
18:04:21.379 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:21.429 > sending commands enabled, reachable, eligible
18:04:21.479 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:21.529 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:21.812 > MPPTs AC power: a: 119 W b: 118 W
18:04:21.824 > [PowerMeterHttpJson] New total: 6.17
18:04:21.831 > RX Period End
18:04:21.882 > All missing
18:04:21.939 > Nothing received, resend whole request
18:04:22.091 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 F0 00 00 00 00 00 00 00 00 6E 14 4F
18:04:22.195 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.2 W (valid)
18:04:22.295 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:22.396 > [DPL] requesting 242 W from 1 solar-powered inverter currently producing 236 W (diff 6 W, hysteresis 10 W)
18:04:22.497 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 6 W AC
18:04:22.599 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:22.702 > [DPL inverter 114190550241]:
18:04:22.753 > solar-powered, producing 236 W
18:04:23.083 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:23.098 > sending commands enabled, reachable, eligible
18:04:23.105 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:23.114 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:23.120 > MPPTs AC power: a: 119 W b: 118 W
18:04:23.184 > RX Period End
18:04:23.241 > All missing
18:04:23.347 > Nothing received, resend whole request
18:04:23.397 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 F0 00 00 00 00 00 00 00 00 6E 14 4F
18:04:23.448 > RX Period End
18:04:23.494 > All missing
18:04:23.556 > Nothing received, resend whole request
18:04:23.725 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 F0 00 00 00 00 00 00 00 00 6E 14 4F
18:04:23.785 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.2 W (valid)
18:04:23.849 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:23.930 > [DPL] requesting 242 W from 1 solar-powered inverter currently producing 236 W (diff 6 W, hysteresis 10 W)
18:04:23.979 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 6 W AC
18:04:24.043 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:24.338 > [DPL inverter 114190550241]:
18:04:24.351 > solar-powered, producing 236 W
18:04:24.358 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:24.400 > sending commands enabled, reachable, eligible
18:04:24.449 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:24.547 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:24.751 > MPPTs AC power: a: 119 W b: 118 W
18:04:24.802 > RX Period End
18:04:24.851 > All missing
18:04:24.904 > Nothing received, resend count exeeded
18:04:24.951 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 F0 00 00 00 00 00 00 00 00 7A 00 5B
18:04:25.083 > RX Period End
18:04:25.141 > All missing
18:04:25.191 > Nothing received, resend whole request
18:04:25.237 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 F0 00 00 00 00 00 00 00 00 7A 00 5B
18:04:25.288 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.2 W (valid)
18:04:25.348 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:25.580 > [DPL] requesting 242 W from 1 solar-powered inverter currently producing 236 W (diff 6 W, hysteresis 10 W)
18:04:25.593 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 6 W AC
18:04:25.599 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:25.608 > [DPL inverter 114190550241]:
18:04:25.670 > solar-powered, producing 236 W
18:04:25.794 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:25.875 > sending commands enabled, reachable, eligible
18:04:25.921 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:25.972 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:26.081 > MPPTs AC power: a: 119 W b: 118 W
18:04:26.184 > RX Period End
18:04:26.239 > All missing
18:04:26.288 > Nothing received, resend whole request
18:04:26.347 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 F0 00 00 00 00 00 00 00 00 7A 00 5B
18:04:26.396 > RX Period End
18:04:26.475 > All missing
18:04:26.540 > Nothing received, resend whole request
18:04:26.817 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 F0 00 00 00 00 00 00 00 00 7A 00 5B
18:04:26.837 > RX Period End
18:04:26.843 > All missing
18:04:26.899 > Nothing received, resend whole request
18:04:27.005 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 F0 00 00 00 00 00 00 00 00 7A 00 5B
18:04:27.105 > RX Period End
18:04:27.157 > All missing
18:04:27.207 > Nothing received, resend count exeeded
18:04:27.260 > Fetch inverter: 114190550241
18:04:27.306 > TX RealTimeRunData Channel: 61 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B0 F8 00 00 00 00 00 00 00 00 74 68 99
18:04:27.414 > Interrupt received
18:04:27.460 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BE 01 19 04 E2 01 BE 01 16 04 D4 00 07 AB | -80 dBm
18:04:27.617 > Interrupt received
18:04:27.665 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 68 03 E8 01 07 00 07 82 AC BA | -80 dBm
18:04:28.040 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.2 W (valid)
18:04:28.052 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:28.059 > [DPL] requesting 242 W from 1 solar-powered inverter currently producing 236 W (diff 6 W, hysteresis 10 W)
18:04:28.066 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 6 W AC
18:04:28.129 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:28.232 > [DPL inverter 114190550241]:
18:04:28.305 > solar-powered, producing 236 W
18:04:28.366 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:28.428 > sending commands enabled, reachable, eligible
18:04:28.473 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:28.522 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:28.573 > MPPTs AC power: a: 119 W b: 118 W
18:04:28.622 > RX Period End
18:04:28.666 > Middle missing
18:04:28.744 > Request retransmit: 2
18:04:28.792 > TX RequestFrame Channel: 75 --> 15 90 55 02 41 80 18 83 32 82 38
18:04:28.839 > Interrupt received
18:04:28.889 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 02 80 A3 00 07 37 07 05 3D 05 2B 08 DA 13 87 09 3F E5 | -80 dBm
18:04:28.940 > RX Period End
18:04:29.051 > Success
18:04:29.336 > [PowerMeterHttpJson] New total: 8.31
18:04:29.349 > [DPL] the system is stable, the last power limit is still valid
18:04:29.355 > [DPL] targeting 0 W, base load is 100 W, power meter reads 8.3 W (valid)
18:04:29.362 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:29.369 > [DPL] requesting 244 W from 1 solar-powered inverter currently producing 236 W (diff 8 W, hysteresis 10 W)
18:04:29.460 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 8 W AC
18:04:29.512 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:29.559 > [DPL inverter 114190550241]:
18:04:29.606 > solar-powered, producing 236 W
18:04:29.768 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:29.825 > sending commands enabled, reachable, eligible
18:04:29.876 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:29.983 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:30.290 > MPPTs AC power: a: 119 W b: 118 W
18:04:30.607 > [DPL] targeting 0 W, base load is 100 W, power meter reads 8.3 W (valid)
18:04:30.619 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:30.625 > [DPL] requesting 244 W from 1 solar-powered inverter currently producing 236 W (diff 8 W, hysteresis 10 W)
18:04:30.632 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 8 W AC
18:04:30.651 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:30.791 > [DPL inverter 114190550241]:
18:04:30.851 > solar-powered, producing 236 W
18:04:30.903 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:30.996 > sending commands enabled, reachable, eligible
18:04:31.048 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:31.095 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:31.147 > MPPTs AC power: a: 119 W b: 118 W
18:04:31.205 > [DPL] targeting 0 W, base load is 100 W, power meter reads 8.3 W (valid)
18:04:31.304 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:31.406 > [DPL] requesting 244 W from 1 solar-powered inverter currently producing 236 W (diff 8 W, hysteresis 10 W)
18:04:31.610 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 8 W AC
18:04:31.837 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:31.849 > [DPL inverter 114190550241]:
18:04:31.857 > solar-powered, producing 236 W
18:04:31.864 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:31.918 > sending commands enabled, reachable, eligible
18:04:31.967 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:32.017 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:32.069 > MPPTs AC power: a: 119 W b: 118 W
18:04:32.114 > [DPL] targeting 0 W, base load is 100 W, power meter reads 8.3 W (valid)
18:04:32.158 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:32.206 > [DPL] requesting 244 W from 1 solar-powered inverter currently producing 236 W (diff 8 W, hysteresis 10 W)
18:04:32.250 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 8 W AC
18:04:32.300 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:32.356 > [DPL inverter 114190550241]:
18:04:32.430 > solar-powered, producing 236 W
18:04:32.484 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:32.543 > sending commands enabled, reachable, eligible
18:04:32.635 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:32.738 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:32.840 > MPPTs AC power: a: 119 W b: 118 W
18:04:33.096 > Fetch inverter: 114184847551
18:04:33.110 > Request SystemConfigPara
18:04:33.118 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B0 FD 00 00 00 00 00 00 00 00 24 57 51
18:04:33.127 > RX Period End
18:04:33.251 > All missing
18:04:33.305 > Nothing received, resend whole request
18:04:33.373 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B0 FD 00 00 00 00 00 00 00 00 24 57 51
18:04:33.443 > [DPL] targeting 0 W, base load is 100 W, power meter reads 8.3 W (valid)
18:04:33.508 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:33.555 > [DPL] requesting 244 W from 1 solar-powered inverter currently producing 236 W (diff 8 W, hysteresis 10 W)
18:04:33.608 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 8 W AC
18:04:33.656 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:33.761 > [DPL inverter 114190550241]:
18:04:33.806 > solar-powered, producing 236 W
18:04:33.870 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:33.924 > sending commands enabled, reachable, eligible
18:04:34.069 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:34.387 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:34.399 > MPPTs AC power: a: 119 W b: 118 W
18:04:34.412 > [PowerMeterHttpJson] New total: -4.53
18:04:34.419 > RX Period End
18:04:34.425 > All missing
18:04:34.432 > Nothing received, resend whole request
18:04:34.478 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B0 FD 00 00 00 00 00 00 00 00 24 57 51
18:04:34.526 > RX Period End
18:04:34.573 > All missing
18:04:34.622 > Nothing received, resend whole request
18:04:34.666 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B0 FD 00 00 00 00 00 00 00 00 24 57 51
18:04:34.714 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.5 W (valid)
18:04:34.785 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:34.841 > [DPL] requesting 231 W from 1 solar-powered inverter currently producing 236 W (diff -5 W, hysteresis 10 W)
18:04:34.891 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:34.943 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:35.092 > [DPL inverter 114190550241]:
18:04:35.140 > solar-powered, producing 236 W
18:04:35.194 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:35.247 > sending commands enabled, reachable, eligible
18:04:35.617 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:35.630 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:35.637 > MPPTs AC power: a: 119 W b: 118 W
18:04:35.707 > RX Period End
18:04:35.758 > All missing
18:04:35.810 > Nothing received, resend whole request
18:04:35.861 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B0 FD 00 00 00 00 00 00 00 00 24 57 51
18:04:36.014 > RX Period End
18:04:36.062 > All missing
18:04:36.109 > Nothing received, resend count exeeded
18:04:36.159 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.5 W (valid)
18:04:36.209 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:36.260 > [DPL] requesting 231 W from 1 solar-powered inverter currently producing 236 W (diff -5 W, hysteresis 10 W)
18:04:36.424 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:36.477 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:36.526 > [DPL inverter 114190550241]:
18:04:36.629 > solar-powered, producing 236 W
18:04:36.898 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:36.910 > sending commands enabled, reachable, eligible
18:04:36.919 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:36.928 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:36.936 > MPPTs AC power: a: 119 W b: 118 W
18:04:37.037 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 FD 00 00 00 00 00 00 00 00 FE 4C 8A
18:04:37.140 > RX Period End
18:04:37.196 > All missing
18:04:37.249 > Nothing received, resend whole request
18:04:37.299 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 FD 00 00 00 00 00 00 00 00 FE 4C 8A
18:04:37.366 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.5 W (valid)
18:04:37.414 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:37.461 > [DPL] requesting 231 W from 1 solar-powered inverter currently producing 236 W (diff -5 W, hysteresis 10 W)
18:04:37.549 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:37.655 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:37.756 > [DPL inverter 114190550241]:
18:04:37.858 > solar-powered, producing 236 W
18:04:38.128 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:38.140 > sending commands enabled, reachable, eligible
18:04:38.147 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:38.162 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:38.269 > MPPTs AC power: a: 119 W b: 118 W
18:04:38.319 > RX Period End
18:04:38.377 > All missing
18:04:38.424 > Nothing received, resend whole request
18:04:38.475 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 FD 00 00 00 00 00 00 00 00 FE 4C 8A
18:04:38.524 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.5 W (valid)
18:04:38.580 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:38.678 > [DPL] requesting 231 W from 1 solar-powered inverter currently producing 236 W (diff -5 W, hysteresis 10 W)
18:04:38.779 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:38.834 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:38.888 > [DPL inverter 114190550241]:
18:04:38.983 > solar-powered, producing 236 W
18:04:39.086 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:39.472 > sending commands enabled, reachable, eligible
18:04:39.484 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:39.496 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:39.502 > MPPTs AC power: a: 119 W b: 118 W
18:04:39.597 > RX Period End
18:04:39.646 > All missing
18:04:39.697 > Nothing received, resend whole request
18:04:39.747 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 FD 00 00 00 00 00 00 00 00 FE 4C 8A
18:04:39.796 > [PowerMeterHttpJson] New total: -4.63
18:04:39.847 > [DPL] the system is stable, the last power limit is still valid
18:04:40.014 > RX Period End
18:04:40.322 > All missing
18:04:40.379 > Nothing received, resend whole request
18:04:40.717 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B0 FD 00 00 00 00 00 00 00 00 FE 4C 8A
18:04:40.737 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.6 W (valid)
18:04:40.744 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:40.848 > [DPL] requesting 231 W from 1 solar-powered inverter currently producing 236 W (diff -5 W, hysteresis 10 W)
18:04:40.929 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:40.983 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:41.134 > [DPL inverter 114190550241]:
18:04:41.212 > solar-powered, producing 236 W
18:04:41.263 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:41.312 > sending commands enabled, reachable, eligible
18:04:41.549 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:41.598 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:41.646 > MPPTs AC power: a: 119 W b: 118 W
18:04:41.699 > RX Period End
18:04:41.986 > All missing
18:04:41.998 > Nothing received, resend count exeeded
18:04:42.004 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 FD 00 00 00 00 00 00 00 00 EA 58 9E
18:04:42.011 > RX Period End
18:04:42.055 > All missing
18:04:42.157 > Nothing received, resend whole request
18:04:42.297 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 FD 00 00 00 00 00 00 00 00 EA 58 9E
18:04:42.360 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.6 W (valid)
18:04:42.419 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:42.568 > [DPL] requesting 231 W from 1 solar-powered inverter currently producing 236 W (diff -5 W, hysteresis 10 W)
18:04:42.616 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:42.669 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:42.722 > [DPL inverter 114190550241]:
18:04:42.877 > solar-powered, producing 236 W
18:04:42.975 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:43.079 > sending commands enabled, reachable, eligible
18:04:43.281 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:43.293 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:43.317 > MPPTs AC power: a: 119 W b: 118 W
18:04:43.365 > RX Period End
18:04:43.424 > All missing
18:04:43.485 > Nothing received, resend whole request
18:04:43.534 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 FD 00 00 00 00 00 00 00 00 EA 58 9E
18:04:43.590 > RX Period End
18:04:43.694 > All missing
18:04:43.751 > Nothing received, resend whole request
18:04:43.804 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 FD 00 00 00 00 00 00 00 00 EA 58 9E
18:04:43.867 > RX Period End
18:04:43.922 > All missing
18:04:43.968 > Nothing received, resend whole request
18:04:44.026 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B0 FD 00 00 00 00 00 00 00 00 EA 58 9E
18:04:44.125 > RX Period End
18:04:44.207 > All missing
18:04:44.259 > Nothing received, resend count exeeded
18:04:44.527 > Fetch inverter: 114190550241
18:04:44.626 > TX RealTimeRunData Channel: 3 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 05 00 00 00 00 00 00 00 00 25 65 39
18:04:44.718 > Interrupt received
18:04:44.764 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BE 01 14 04 C9 01 BE 01 12 04 C2 00 07 9F | -80 dBm
18:04:44.845 > Interrupt received
18:04:44.926 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 02 80 A4 00 07 37 08 05 3E 05 2C 08 CF 13 86 09 16 D4 | -80 dBm
18:04:45.024 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.6 W (valid)
18:04:45.128 > [DPL] inverter 114190550241 is behind power meter producing 236 W
18:04:45.202 > [DPL] requesting 231 W from 1 solar-powered inverter currently producing 236 W (diff -5 W, hysteresis 10 W)
18:04:45.256 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:45.304 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:45.364 > [DPL inverter 114190550241]:
18:04:45.435 > solar-powered, producing 236 W
18:04:45.754 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:45.767 > sending commands enabled, reachable, eligible
18:04:45.773 > max reduction production/standby: 186/186 W, max increase: 564 W
18:04:45.795 > target limit/output/state: -1 W (unchanged)/236 W/unchanged, 0 update timeouts
18:04:45.842 > MPPTs AC power: a: 119 W b: 118 W
18:04:45.889 > RX Period End
18:04:45.939 > Last missing
18:04:46.049 > Request retransmit: 3
18:04:46.152 > TX RequestFrame Channel: 23 --> 15 90 55 02 41 80 18 83 32 83 39
18:04:46.208 > Interrupt received
18:04:46.356 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 83 00 02 00 67 03 E8 01 05 00 07 5A E1 20 | -80 dBm
18:04:46.410 > RX Period End
18:04:46.561 > Success
18:04:46.664 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.6 W (valid)
18:04:46.712 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:47.071 > [DPL] requesting 227 W from 1 solar-powered inverter currently producing 232 W (diff -5 W, hysteresis 10 W)
18:04:47.085 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:47.093 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:47.101 > [DPL inverter 114190550241]:
18:04:47.129 > solar-powered, producing 232 W
18:04:47.180 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:47.278 > sending commands enabled, reachable, eligible
18:04:47.335 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:47.483 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:47.527 > MPPTs AC power: a: 117 W b: 116 W
18:04:47.574 > [DPL] targeting 0 W, base load is 100 W, power meter reads -4.6 W (valid)
18:04:47.688 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:47.791 > [DPL] requesting 227 W from 1 solar-powered inverter currently producing 232 W (diff -5 W, hysteresis 10 W)
18:04:47.893 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:47.940 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:48.299 > [DPL inverter 114190550241]:
18:04:48.311 > solar-powered, producing 232 W
18:04:48.318 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:48.324 > sending commands enabled, reachable, eligible
18:04:48.375 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:48.430 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:48.492 > MPPTs AC power: a: 117 W b: 116 W
18:04:48.542 > [PowerMeterHttpJson] New total: -2.88
18:04:48.602 > [DPL] targeting 0 W, base load is 100 W, power meter reads -2.9 W (valid)
18:04:48.653 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:48.814 > [DPL] requesting 229 W from 1 solar-powered inverter currently producing 232 W (diff -3 W, hysteresis 10 W)
18:04:48.917 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:48.969 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:49.121 > [DPL inverter 114190550241]:
18:04:49.225 > solar-powered, producing 232 W
18:04:49.540 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:49.559 > sending commands enabled, reachable, eligible
18:04:49.567 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:49.603 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:49.690 > MPPTs AC power: a: 117 W b: 116 W
18:04:49.743 > [DPL] targeting 0 W, base load is 100 W, power meter reads -2.9 W (valid)
18:04:49.793 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:49.842 > [DPL] requesting 229 W from 1 solar-powered inverter currently producing 232 W (diff -3 W, hysteresis 10 W)
18:04:49.964 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:50.270 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:50.326 > [DPL inverter 114190550241]:
18:04:50.454 > solar-powered, producing 232 W
18:04:50.509 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:50.784 > sending commands enabled, reachable, eligible
18:04:50.798 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:50.803 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:50.811 > MPPTs AC power: a: 117 W b: 116 W
18:04:50.818 > Fetch inverter: 114184847551
18:04:50.825 > Request SystemConfigPara
18:04:50.847 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 0A 00 00 00 00 00 00 00 00 D5 24 25
18:04:50.965 > RX Period End
18:04:51.016 > All missing
18:04:51.069 > Nothing received, resend whole request
18:04:51.118 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 0A 00 00 00 00 00 00 00 00 D5 24 25
18:04:51.271 > [DPL] targeting 0 W, base load is 100 W, power meter reads -2.9 W (valid)
18:04:51.374 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:51.479 > [DPL] requesting 229 W from 1 solar-powered inverter currently producing 232 W (diff -3 W, hysteresis 10 W)
18:04:51.583 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:51.681 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:51.784 > [DPL inverter 114190550241]:
18:04:52.025 > solar-powered, producing 232 W
18:04:52.041 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:52.049 > sending commands enabled, reachable, eligible
18:04:52.193 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:52.241 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:52.292 > MPPTs AC power: a: 117 W b: 116 W
18:04:52.344 > RX Period End
18:04:52.501 > All missing
18:04:52.603 > Nothing received, resend whole request
18:04:52.706 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 0A 00 00 00 00 00 00 00 00 D5 24 25
18:04:52.750 > RX Period End
18:04:52.910 > All missing
18:04:52.962 > Nothing received, resend whole request
18:04:53.270 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 0A 00 00 00 00 00 00 00 00 D5 24 25
18:04:53.283 > [DPL] targeting 0 W, base load is 100 W, power meter reads -2.9 W (valid)
18:04:53.290 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:53.296 > [DPL] requesting 229 W from 1 solar-powered inverter currently producing 232 W (diff -3 W, hysteresis 10 W)
18:04:53.383 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:04:53.430 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:53.478 > [DPL inverter 114190550241]:
18:04:53.530 > solar-powered, producing 232 W
18:04:53.580 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:53.627 > sending commands enabled, reachable, eligible
18:04:53.672 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:53.717 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:53.763 > MPPTs AC power: a: 117 W b: 116 W
18:04:53.813 > RX Period End
18:04:53.863 > All missing
18:04:53.930 > Nothing received, resend whole request
18:04:53.972 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 0A 00 00 00 00 00 00 00 00 D5 24 25
18:04:54.020 > RX Period End
18:04:54.068 > All missing
18:04:54.116 > Nothing received, resend count exeeded
18:04:54.164 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 0A 00 00 00 00 00 00 00 00 0F 3F FE
18:04:54.212 > [PowerMeterHttpJson] New total: 6.93
18:04:54.263 > [DPL] the system is stable, the last power limit is still valid
18:04:54.549 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.9 W (valid)
18:04:54.562 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:54.569 > [DPL] requesting 239 W from 1 solar-powered inverter currently producing 232 W (diff 7 W, hysteresis 10 W)
18:04:54.576 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 7 W AC
18:04:54.596 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:54.754 > [DPL inverter 114190550241]:
18:04:54.805 > solar-powered, producing 232 W
18:04:54.851 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:54.897 > sending commands enabled, reachable, eligible
18:04:55.061 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:55.162 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:55.265 > MPPTs AC power: a: 117 W b: 116 W
18:04:55.368 > RX Period End
18:04:55.470 > All missing
18:04:55.752 > Nothing received, resend whole request
18:04:55.777 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 0A 00 00 00 00 00 00 00 00 0F 3F FE
18:04:55.845 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.9 W (valid)
18:04:55.901 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:55.957 > [DPL] requesting 239 W from 1 solar-powered inverter currently producing 232 W (diff 7 W, hysteresis 10 W)
18:04:56.085 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 7 W AC
18:04:56.136 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:56.291 > [DPL inverter 114190550241]:
18:04:56.337 > solar-powered, producing 232 W
18:04:56.393 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:56.495 > sending commands enabled, reachable, eligible
18:04:56.597 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:56.652 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:56.973 > MPPTs AC power: a: 117 W b: 116 W
18:04:56.987 > RX Period End
18:04:57.006 > All missing
18:04:57.054 > Nothing received, resend whole request
18:04:57.104 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 0A 00 00 00 00 00 00 00 00 0F 3F FE
18:04:57.160 > RX Period End
18:04:57.229 > All missing
18:04:57.279 > Nothing received, resend whole request
18:04:57.417 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 0A 00 00 00 00 00 00 00 00 0F 3F FE
18:04:57.471 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.9 W (valid)
18:04:57.620 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:57.672 > [DPL] requesting 239 W from 1 solar-powered inverter currently producing 232 W (diff 7 W, hysteresis 10 W)
18:04:57.718 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 7 W AC
18:04:57.771 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:57.846 > [DPL inverter 114190550241]:
18:04:57.898 > solar-powered, producing 232 W
18:04:57.952 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:58.199 > sending commands enabled, reachable, eligible
18:04:58.212 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:58.219 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:58.245 > MPPTs AC power: a: 117 W b: 116 W
18:04:58.330 > RX Period End
18:04:58.405 > All missing
18:04:58.470 > Nothing received, resend whole request
18:04:58.525 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 0A 00 00 00 00 00 00 00 00 0F 3F FE
18:04:58.647 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.9 W (valid)
18:04:58.702 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:04:58.749 > [DPL] requesting 239 W from 1 solar-powered inverter currently producing 232 W (diff 7 W, hysteresis 10 W)
18:04:58.849 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 7 W AC
18:04:58.954 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:04:58.999 > [DPL inverter 114190550241]:
18:04:59.075 > solar-powered, producing 232 W
18:04:59.128 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:04:59.187 > sending commands enabled, reachable, eligible
18:04:59.577 > max reduction production/standby: 182/182 W, max increase: 568 W
18:04:59.593 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:04:59.603 > MPPTs AC power: a: 117 W b: 116 W
18:04:59.611 > RX Period End
18:04:59.617 > All missing
18:04:59.668 > Nothing received, resend count exeeded
18:04:59.770 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 0A 00 00 00 00 00 00 00 00 1B 2B EA
18:04:59.819 > RX Period End
18:04:59.878 > All missing
18:04:59.929 > Nothing received, resend whole request
18:05:00.250 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 0A 00 00 00 00 00 00 00 00 1B 2B EA
18:05:00.296 > RX Period End
18:05:00.344 > All missing
18:05:00.488 > Nothing received, resend whole request
18:05:00.590 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 0A 00 00 00 00 00 00 00 00 1B 2B EA
18:05:00.828 > [DPL] targeting 0 W, base load is 100 W, power meter reads 6.9 W (valid)
18:05:00.844 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:05:00.857 > [DPL] requesting 239 W from 1 solar-powered inverter currently producing 232 W (diff 7 W, hysteresis 10 W)
18:05:00.910 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 7 W AC
18:05:01.021 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:01.071 > [DPL inverter 114190550241]:
18:05:01.124 > solar-powered, producing 232 W
18:05:01.184 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:05:01.306 > sending commands enabled, reachable, eligible
18:05:01.376 > max reduction production/standby: 182/182 W, max increase: 568 W
18:05:01.512 > target limit/output/state: -1 W (unchanged)/232 W/unchanged, 0 update timeouts
18:05:01.616 > MPPTs AC power: a: 117 W b: 116 W
18:05:01.666 > RX Period End
18:05:01.716 > All missing
18:05:01.766 > Nothing received, resend whole request
18:05:01.818 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 0A 00 00 00 00 00 00 00 00 1B 2B EA
18:05:02.079 > [PowerMeterHttpJson] New total: 39.31
18:05:02.091 > RX Period End
18:05:02.098 > All missing
18:05:02.106 > Nothing received, resend whole request
18:05:02.122 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 0A 00 00 00 00 00 00 00 00 1B 2B EA
18:05:02.228 > RX Period End
18:05:02.330 > All missing
18:05:02.383 > Nothing received, resend count exeeded
18:05:02.434 > Fetch inverter: 114190550241
18:05:02.481 > TX RealTimeRunData Channel: 40 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 12 00 00 00 00 00 00 00 00 D5 8E 35
18:05:02.525 > Interrupt received
18:05:02.579 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BE 01 0F 04 B5 01 BE 01 0E 04 B3 00 07 95 | -80 dBm
18:05:02.741 > Interrupt received
18:05:02.844 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 02 80 A4 00 07 37 08 05 3E 05 2C 08 D8 13 86 08 F5 21 | -80 dBm
18:05:02.945 > Interrupt received
18:05:03.002 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 65 03 E8 01 06 00 07 16 20 AE | -80 dBm
18:05:03.049 > [DPL] targeting 0 W, base load is 100 W, power meter reads 39.3 W (valid)
18:05:03.313 > [DPL] inverter 114190550241 is behind power meter producing 232 W
18:05:03.327 > [DPL] requesting 271 W from 1 solar-powered inverter currently producing 232 W (diff 39 W, hysteresis 10 W)
18:05:03.335 > [DPL] will cover 271 W using 1 solar-powered inverter
18:05:03.343 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:05:03.352 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:03.396 > [DPL inverter 114190550241]:
18:05:03.451 > solar-powered, producing 232 W
18:05:03.561 > lower/current/upper limit: 50/228/800 W, output capability: 800 W
18:05:03.664 > sending commands enabled, reachable, eligible
18:05:03.718 > max reduction production/standby: 182/182 W, max increase: 568 W
18:05:03.786 > target limit/output/state: 271 W (update)/271 W/production, 0 update timeouts
18:05:03.829 > MPPTs AC power: a: 117 W b: 116 W
18:05:03.903 > [DPL inverter 114190550241]: sending limit of 33.9 % (271 W respectively), max output is 800 W
18:05:04.071 > RX Period End
18:05:04.175 > Success
18:05:04.277 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:04.528 > TX ActivePowerControl Channel: 61 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 52 00 01 8D 60 CB
18:05:04.540 > Interrupt received
18:05:04.548 > RX Channel: 40 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
18:05:04.554 > RX Period End
18:05:04.694 > Success
18:05:04.735 > [DPL inverter 114190550241]: actual limit is 33.8 % (270 W respectively), effective 2034 ms after update started, requested were 33.9 %
18:05:04.891 > [DPL] waiting for sufficiently recent inverter data
18:05:04.943 > [PowerMeterHttpJson] New total: -35.68
18:05:04.999 > Fetch inverter: 114184847551
18:05:05.066 > Request SystemConfigPara
18:05:05.198 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 17 00 00 00 00 00 00 00 00 85 B1 FD
18:05:05.246 > RX Period End
18:05:05.300 > All missing
18:05:05.386 > Nothing received, resend whole request
18:05:05.505 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 17 00 00 00 00 00 00 00 00 85 B1 FD
18:05:05.850 > RX Period End
18:05:05.875 > All missing
18:05:05.886 > Nothing received, resend whole request
18:05:05.914 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 17 00 00 00 00 00 00 00 00 85 B1 FD
18:05:06.017 > RX Period End
18:05:06.120 > All missing
18:05:06.172 > Nothing received, resend whole request
18:05:06.222 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 17 00 00 00 00 00 00 00 00 85 B1 FD
18:05:06.272 > RX Period End
18:05:06.320 > All missing
18:05:06.384 > Nothing received, resend whole request
18:05:06.431 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 17 00 00 00 00 00 00 00 00 85 B1 FD
18:05:06.530 > RX Period End
18:05:06.632 > All missing
18:05:06.685 > Nothing received, resend count exeeded
18:05:06.765 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 17 00 00 00 00 00 00 00 00 5F AA 26
18:05:07.126 > RX Period End
18:05:07.140 > All missing
18:05:07.146 > Nothing received, resend whole request
18:05:07.193 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 17 00 00 00 00 00 00 00 00 5F AA 26
18:05:07.248 > RX Period End
18:05:07.380 > All missing
18:05:07.432 > Nothing received, resend whole request
18:05:07.563 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 17 00 00 00 00 00 00 00 00 5F AA 26
18:05:07.659 > [PowerMeterHttpJson] New total: -35.81
18:05:07.778 > RX Period End
18:05:07.825 > All missing
18:05:07.874 > Nothing received, resend whole request
18:05:07.924 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 17 00 00 00 00 00 00 00 00 5F AA 26
18:05:08.069 > RX Period End
18:05:08.384 > All missing
18:05:08.396 > Nothing received, resend whole request
18:05:08.409 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 17 00 00 00 00 00 00 00 00 5F AA 26
18:05:08.472 > RX Period End
18:05:08.525 > All missing
18:05:08.581 > Nothing received, resend count exeeded
18:05:08.680 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 17 00 00 00 00 00 00 00 00 4B BE 32
18:05:08.738 > RX Period End
18:05:08.885 > All missing
18:05:08.995 > Nothing received, resend whole request
18:05:09.089 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 17 00 00 00 00 00 00 00 00 4B BE 32
18:05:09.191 > RX Period End
18:05:09.294 > All missing
18:05:09.349 > Nothing received, resend whole request
18:05:09.627 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 17 00 00 00 00 00 00 00 00 4B BE 32
18:05:09.639 > [DPL] waiting for sufficiently recent inverter data
18:05:09.703 > RX Period End
18:05:09.751 > All missing
18:05:09.811 > Nothing received, resend whole request
18:05:09.861 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 17 00 00 00 00 00 00 00 00 4B BE 32
18:05:10.017 > RX Period End
18:05:10.327 > All missing
18:05:10.387 > Nothing received, resend whole request
18:05:10.524 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 17 00 00 00 00 00 00 00 00 4B BE 32
18:05:10.626 > RX Period End
18:05:10.877 > All missing
18:05:10.892 > Nothing received, resend count exeeded
18:05:10.899 > Fetch inverter: 114190550241
18:05:10.906 > TX RealTimeRunData Channel: 75 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 20 00 00 00 00 00 00 00 00 B4 C3 2B
18:05:10.955 > Interrupt received
18:05:11.011 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BD 01 44 05 9D 01 BD 01 43 05 9B 00 07 93 | -80 dBm
18:05:11.078 > Interrupt received
18:05:11.133 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 02 80 A4 00 07 37 09 05 3E 05 2D 08 D8 13 86 0A AE 78 | -80 dBm
18:05:11.239 > Interrupt received
18:05:11.342 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 83 00 02 00 79 03 E8 01 06 00 07 CA 36 7A | -80 dBm
18:05:11.466 > RX Period End
18:05:11.547 > Success
18:05:11.648 > [DPL] waiting for sufficiently recent power meter reading
18:05:11.711 > [PowerMeterHttpJson] New total: -36.81
18:05:11.780 > Fetch inverter: 114184847551
18:05:11.826 > Request SystemConfigPara
18:05:12.111 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 25 00 00 00 00 00 00 00 00 E4 FC E3
18:05:12.124 > RX Period End
18:05:12.131 > All missing
18:05:12.138 > Nothing received, resend whole request
18:05:12.144 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 25 00 00 00 00 00 00 00 00 E4 FC E3
18:05:12.151 > RX Period End
18:05:12.269 > All missing
18:05:12.390 > Nothing received, resend whole request
18:05:12.490 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 25 00 00 00 00 00 00 00 00 E4 FC E3
18:05:12.538 > [PowerMeterHttpJson] New total: -36.37
18:05:12.601 > [DPL] targeting 0 W, base load is 100 W, power meter reads -36.4 W (valid)
18:05:12.654 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:05:12.775 > [DPL] requesting 237 W from 1 solar-powered inverter currently producing 273 W (diff -36 W, hysteresis 10 W)
18:05:12.824 > [DPL] will cover 237 W using 1 solar-powered inverter
18:05:12.980 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:05:13.034 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:13.082 > [DPL inverter 114190550241]:
18:05:13.131 > solar-powered, producing 273 W
18:05:13.409 > lower/current/upper limit: 50/270/800 W, output capability: 800 W
18:05:13.421 > sending commands enabled, reachable, eligible
18:05:13.428 > max reduction production/standby: 223/223 W, max increase: 527 W
18:05:13.464 > target limit/output/state: 237 W (update)/237 W/production, 0 update timeouts
18:05:13.546 > MPPTs AC power: a: 137 W b: 137 W
18:05:13.698 > [DPL inverter 114190550241]: sending limit of 29.6 % (237 W respectively), max output is 800 W
18:05:13.800 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:13.857 > RX Period End
18:05:14.008 > All missing
18:05:14.107 > Nothing received, resend whole request
18:05:14.210 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 25 00 00 00 00 00 00 00 00 E4 FC E3
18:05:14.264 > RX Period End
18:05:14.345 > All missing
18:05:14.401 > Nothing received, resend whole request
18:05:14.653 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 25 00 00 00 00 00 00 00 00 E4 FC E3
18:05:14.667 > RX Period End
18:05:14.674 > All missing
18:05:14.721 > Nothing received, resend count exeeded
18:05:14.770 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 25 00 00 00 00 00 00 00 00 3E E7 38
18:05:14.832 > RX Period End
18:05:14.892 > All missing
18:05:14.949 > Nothing received, resend whole request
18:05:15.010 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 25 00 00 00 00 00 00 00 00 3E E7 38
18:05:15.072 > RX Period End
18:05:15.142 > All missing
18:05:15.206 > Nothing received, resend whole request
18:05:15.273 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 25 00 00 00 00 00 00 00 00 3E E7 38
18:05:15.408 > RX Period End
18:05:15.466 > All missing
18:05:15.539 > Nothing received, resend whole request
18:05:15.589 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 25 00 00 00 00 00 00 00 00 3E E7 38
18:05:15.636 > RX Period End
18:05:15.928 > All missing
18:05:15.943 > Nothing received, resend whole request
18:05:15.949 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 25 00 00 00 00 00 00 00 00 3E E7 38
18:05:15.956 > [PowerMeterHttpJson] New total: -41.72
18:05:15.975 > RX Period End
18:05:16.021 > All missing
18:05:16.155 > Nothing received, resend count exeeded
18:05:16.207 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 25 00 00 00 00 00 00 00 00 2A F3 2C
18:05:16.256 > RX Period End
18:05:16.305 > All missing
18:05:16.356 > Nothing received, resend whole request
18:05:16.403 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 25 00 00 00 00 00 00 00 00 2A F3 2C
18:05:16.463 > RX Period End
18:05:16.565 > All missing
18:05:16.623 > Nothing received, resend whole request
18:05:16.770 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 25 00 00 00 00 00 00 00 00 2A F3 2C
18:05:16.873 > RX Period End
18:05:16.926 > All missing
18:05:17.178 > Nothing received, resend whole request
18:05:17.193 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 25 00 00 00 00 00 00 00 00 2A F3 2C
18:05:17.203 > RX Period End
18:05:17.214 > All missing
18:05:17.281 > Nothing received, resend whole request
18:05:17.383 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 25 00 00 00 00 00 00 00 00 2A F3 2C
18:05:17.435 > RX Period End
18:05:17.497 > All missing
18:05:17.559 > Nothing received, resend count exeeded
18:05:17.619 > TX ActivePowerControl Channel: 3 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 28 00 01 54 41 49
18:05:17.668 > Interrupt received
18:05:17.722 > RX Channel: 40 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
18:05:17.794 > RX Period End
18:05:17.862 > Success
18:05:17.999 > Fetch inverter: 114190550241
18:05:18.101 > [DPL inverter 114190550241]: actual limit is 29.6 % (237 W respectively), effective 8776 ms after update started, requested were 29.6 %
18:05:18.148 > [DPL] waiting for sufficiently recent inverter data
18:05:18.438 > TX RealTimeRunData Channel: 23 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 2F 00 00 00 00 00 00 00 00 44 82 95
18:05:18.450 > Interrupt received
18:05:18.457 > RX Channel: 61 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BD 01 30 05 45 01 BD 01 2F 05 41 00 07 89 | -80 dBm
18:05:18.464 > Interrupt received
18:05:18.471 > RX Channel: 61 --> 95 90 55 02 41 90 55 02 41 02 80 A5 00 07 37 09 05 3F 05 2D 08 BD 13 86 0A 05 B6 | -80 dBm
18:05:18.478 > Interrupt received
18:05:18.514 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 73 03 E8 01 06 00 07 08 35 B3 | -80 dBm
18:05:18.565 > RX Period End
18:05:18.818 > Success
18:05:18.864 > [DPL] waiting for sufficiently recent power meter reading
18:05:19.027 > [PowerMeterHttpJson] New total: -11.64
18:05:19.125 > Fetch inverter: 114184847551
18:05:19.248 > Request SystemConfigPara
18:05:19.330 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 34 00 00 00 00 00 00 00 00 B4 3C 62
18:05:19.403 > RX Period End
18:05:19.671 > All missing
18:05:19.684 > Nothing received, resend whole request
18:05:19.690 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 34 00 00 00 00 00 00 00 00 B4 3C 62
18:05:19.697 > RX Period End
18:05:19.739 > All missing
18:05:19.791 > Nothing received, resend whole request
18:05:19.864 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 34 00 00 00 00 00 00 00 00 B4 3C 62
18:05:19.916 > [PowerMeterHttpJson] New total: -9.61
18:05:20.253 > [DPL] targeting 0 W, base load is 100 W, power meter reads -9.6 W (valid)
18:05:20.352 > [DPL] inverter 114190550241 is behind power meter producing 256 W
18:05:20.456 > [DPL] requesting 246 W from 1 solar-powered inverter currently producing 256 W (diff -10 W, hysteresis 10 W)
18:05:20.503 > [DPL] will cover 246 W using 1 solar-powered inverter
18:05:20.681 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:05:20.948 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:20.961 > [DPL inverter 114190550241]:
18:05:20.968 > solar-powered, producing 256 W
18:05:20.978 > lower/current/upper limit: 50/236/800 W, output capability: 800 W
18:05:20.986 > sending commands enabled, reachable, eligible
18:05:21.073 > max reduction production/standby: 206/206 W, max increase: 544 W
18:05:21.124 > target limit/output/state: 246 W (update)/246 W/production, 0 update timeouts
18:05:21.276 > MPPTs AC power: a: 128 W b: 128 W
18:05:21.328 > [DPL inverter 114190550241]: sending limit of 30.8 % (246 W respectively), max output is 800 W
18:05:21.398 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:21.453 > RX Period End
18:05:21.502 > All missing
18:05:21.685 > Nothing received, resend whole request
18:05:21.788 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 34 00 00 00 00 00 00 00 00 B4 3C 62
18:05:21.890 > RX Period End
18:05:21.946 > All missing
18:05:22.178 > Nothing received, resend whole request
18:05:22.197 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 34 00 00 00 00 00 00 00 00 B4 3C 62
18:05:22.228 > RX Period End
18:05:22.282 > All missing
18:05:22.329 > Nothing received, resend count exeeded
18:05:22.391 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 34 00 00 00 00 00 00 00 00 6E 27 B9
18:05:22.446 > RX Period End
18:05:22.606 > All missing
18:05:22.708 > Nothing received, resend whole request
18:05:22.762 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 34 00 00 00 00 00 00 00 00 6E 27 B9
18:05:22.818 > RX Period End
18:05:22.868 > All missing
18:05:23.016 > Nothing received, resend whole request
18:05:23.063 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 34 00 00 00 00 00 00 00 00 6E 27 B9
18:05:23.451 > RX Period End
18:05:23.466 > All missing
18:05:23.472 > Nothing received, resend whole request
18:05:23.482 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 34 00 00 00 00 00 00 00 00 6E 27 B9
18:05:23.489 > RX Period End
18:05:23.512 > All missing
18:05:23.577 > Nothing received, resend whole request
18:05:23.631 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 34 00 00 00 00 00 00 00 00 6E 27 B9
18:05:23.733 > [PowerMeterHttpJson] New total: 2167.51
18:05:23.790 > RX Period End
18:05:23.847 > All missing
18:05:23.897 > Nothing received, resend count exeeded
18:05:23.948 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 34 00 00 00 00 00 00 00 00 7A 33 AD
18:05:23.992 > RX Period End
18:05:24.043 > All missing
18:05:24.092 > Nothing received, resend whole request
18:05:24.147 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 34 00 00 00 00 00 00 00 00 7A 33 AD
18:05:24.199 > RX Period End
18:05:24.248 > All missing
18:05:24.298 > Nothing received, resend whole request
18:05:24.349 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 34 00 00 00 00 00 00 00 00 7A 33 AD
18:05:24.453 > RX Period End
18:05:24.700 > All missing
18:05:24.712 > Nothing received, resend whole request
18:05:24.719 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 34 00 00 00 00 00 00 00 00 7A 33 AD
18:05:24.728 > RX Period End
18:05:24.735 > All missing
18:05:24.884 > Nothing received, resend whole request
18:05:24.933 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 34 00 00 00 00 00 00 00 00 7A 33 AD
18:05:25.065 > RX Period End
18:05:25.116 > All missing
18:05:25.168 > Nothing received, resend count exeeded
18:05:25.218 > TX ActivePowerControl Channel: 40 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 33 00 01 53 31 25
18:05:25.268 > Interrupt received
18:05:25.312 > RX Channel: 61 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
18:05:25.363 > RX Period End
18:05:25.422 > Success
18:05:25.575 > Fetch inverter: 114190550241
18:05:25.678 > [DPL inverter 114190550241]: actual limit is 30.7 % (246 W respectively), effective 9237 ms after update started, requested were 30.8 %
18:05:25.939 > [DPL] waiting for sufficiently recent inverter data
18:05:25.952 > TX RealTimeRunData Channel: 61 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 3E 00 00 00 00 00 00 00 00 14 42 14
18:05:25.959 > Interrupt received
18:05:25.966 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BE 01 26 05 1B 01 BE 01 26 05 19 00 07 90 | -80 dBm
18:05:26.087 > Interrupt received
18:05:26.190 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 02 80 A6 00 07 37 0A 05 40 05 2E 08 D9 13 86 09 B7 1F | -80 dBm
18:05:26.297 > Interrupt received
18:05:26.348 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 83 00 02 00 6E 03 E8 01 06 00 07 11 D5 55 | -80 dBm
18:05:26.497 > RX Period End
18:05:26.599 > Success
18:05:26.651 > [DPL] waiting for sufficiently recent power meter reading
18:05:26.805 > [PowerMeterHttpJson] New total: 2112.77
18:05:26.874 > Fetch inverter: 114184847551
18:05:27.187 > Request SystemConfigPara
18:05:27.201 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 43 00 00 00 00 00 00 00 00 46 7F A4
18:05:27.208 > RX Period End
18:05:27.215 > All missing
18:05:27.266 > Nothing received, resend whole request
18:05:27.324 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 43 00 00 00 00 00 00 00 00 46 7F A4
18:05:27.408 > [PowerMeterHttpJson] New total: 2067.89
18:05:27.466 > [DPL] targeting 0 W, base load is 100 W, power meter reads 2067.9 W (valid)
18:05:27.520 > [DPL] inverter 114190550241 is behind power meter producing 248 W
18:05:27.565 > [DPL] requesting 800 W from 1 solar-powered inverter currently producing 248 W (diff 552 W, hysteresis 10 W)
18:05:27.727 > [DPL] will cover 800 W using 1 solar-powered inverter
18:05:27.829 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:05:27.882 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:27.930 > [DPL inverter 114190550241]:
18:05:28.033 > solar-powered, producing 248 W
18:05:28.083 > lower/current/upper limit: 50/245/800 W, output capability: 800 W
18:05:28.417 > sending commands enabled, reachable, eligible
18:05:28.431 > max reduction production/standby: 198/198 W, max increase: 552 W
18:05:28.437 > target limit/output/state: 800 W (update)/800 W/production, 0 update timeouts
18:05:28.445 > MPPTs AC power: a: 124 W b: 124 W
18:05:28.453 > [DPL inverter 114190550241]: sending limit of 100.0 % (800 W respectively), max output is 800 W
18:05:28.498 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:28.549 > RX Period End
18:05:28.594 > All missing
18:05:28.751 > Nothing received, resend whole request
18:05:28.802 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 43 00 00 00 00 00 00 00 00 46 7F A4
18:05:28.849 > RX Period End
18:05:28.896 > All missing
18:05:28.952 > Nothing received, resend whole request
18:05:29.011 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 43 00 00 00 00 00 00 00 00 46 7F A4
18:05:29.165 > RX Period End
18:05:29.303 > All missing
18:05:29.350 > Nothing received, resend whole request
18:05:29.764 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 43 00 00 00 00 00 00 00 00 46 7F A4
18:05:29.783 > RX Period End
18:05:29.793 > All missing
18:05:29.805 > Nothing received, resend count exeeded
18:05:29.815 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 43 00 00 00 00 00 00 00 00 9C 64 7F
18:05:29.827 > RX Period End
18:05:29.871 > All missing
18:05:29.987 > Nothing received, resend whole request
18:05:30.291 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 43 00 00 00 00 00 00 00 00 9C 64 7F
18:05:30.361 > RX Period End
18:05:30.421 > All missing
18:05:30.473 > Nothing received, resend whole request
18:05:30.532 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 43 00 00 00 00 00 00 00 00 9C 64 7F
18:05:30.591 > RX Period End
18:05:30.696 > All missing
18:05:31.020 > Nothing received, resend whole request
18:05:31.034 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 43 00 00 00 00 00 00 00 00 9C 64 7F
18:05:31.041 > [PowerMeterHttpJson] New total: 2081.63
18:05:31.057 > RX Period End
18:05:31.106 > All missing
18:05:31.208 > Nothing received, resend whole request
18:05:31.259 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 43 00 00 00 00 00 00 00 00 9C 64 7F
18:05:31.311 > RX Period End
18:05:31.359 > All missing
18:05:31.409 > Nothing received, resend count exeeded
18:05:31.518 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 43 00 00 00 00 00 00 00 00 88 70 6B
18:05:31.564 > RX Period End
18:05:31.610 > All missing
18:05:31.659 > Nothing received, resend whole request
18:05:31.713 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 43 00 00 00 00 00 00 00 00 88 70 6B
18:05:31.788 > RX Period End
18:05:31.838 > All missing
18:05:31.925 > Nothing received, resend whole request
18:05:31.976 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 43 00 00 00 00 00 00 00 00 88 70 6B
18:05:32.267 > RX Period End
18:05:32.280 > All missing
18:05:32.287 > Nothing received, resend whole request
18:05:32.333 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 43 00 00 00 00 00 00 00 00 88 70 6B
18:05:32.434 > RX Period End
18:05:32.538 > All missing
18:05:32.592 > Nothing received, resend whole request
18:05:32.644 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 43 00 00 00 00 00 00 00 00 88 70 6B
18:05:32.693 > RX Period End
18:05:32.744 > All missing
18:05:32.816 > Nothing received, resend count exeeded
18:05:32.877 > TX ActivePowerControl Channel: 75 --> 51 90 55 02 41 80 18 83 32 81 0B 00 03 E8 00 01 D0 40 0E
18:05:32.927 > Interrupt received
18:05:32.976 > RX Channel: 3 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
18:05:33.051 > RX Period End
18:05:33.107 > Success
18:05:33.256 > Fetch inverter: 114190550241
18:05:33.470 > [DPL inverter 114190550241]: actual limit is 100.0 % (800 W respectively), effective 9782 ms after update started, requested were 100.0 %
18:05:33.482 > [DPL] waiting for sufficiently recent inverter data
18:05:33.489 > TX RealTimeRunData Channel: 3 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 4E 00 00 00 00 00 00 00 00 D6 27 C3
18:05:33.563 > [PowerMeterHttpJson] New total: 1544.62
18:05:33.615 > Interrupt received
18:05:33.662 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 02 80 A6 00 07 37 0A 05 40 05 2E 08 DB 13 86 0A 4C E5 | -80 dBm
18:05:33.709 > RX Period End
18:05:33.754 > Last missing
18:05:33.801 > Request retransmit: 3
18:05:33.875 > TX RequestFrame Channel: 23 --> 15 90 55 02 41 80 18 83 32 83 39
18:05:33.928 > Interrupt received
18:05:33.979 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 74 03 E8 01 06 00 07 DB 7A 28 | -80 dBm
18:05:34.075 > RX Period End
18:05:34.179 > Middle missing
18:05:34.229 > Request retransmit: 1
18:05:34.279 > TX RequestFrame Channel: 40 --> 15 90 55 02 41 80 18 83 32 81 3B
18:05:34.350 > RX Period End
18:05:34.409 > Middle missing
18:05:34.485 > Request retransmit: 1
18:05:34.758 > TX RequestFrame Channel: 61 --> 15 90 55 02 41 80 18 83 32 81 3B
18:05:34.773 > Interrupt received
18:05:34.780 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BD 01 38 05 6A 01 BD 01 38 05 67 00 07 9F | -80 dBm
18:05:34.791 > RX Period End
18:05:34.847 > Success
18:05:34.897 > [DPL] waiting for sufficiently recent power meter reading
18:05:34.948 > Fetch inverter: 114184847551
18:05:35.110 > Request SystemConfigPara
18:05:35.165 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 53 00 00 00 00 00 00 00 00 86 B2 B9
18:05:35.223 > [PowerMeterHttpJson] New total: -553.18
18:05:35.276 > [DPL] targeting 0 W, base load is 100 W, power meter reads -553.2 W (valid)
18:05:35.341 > [DPL] inverter 114190550241 is behind power meter producing 263 W
18:05:35.402 > [DPL] requesting 0 W from 1 solar-powered inverter currently producing 263 W (diff -263 W, hysteresis 10 W)
18:05:35.449 > [DPL] will cover 50 W using 1 solar-powered inverter
18:05:35.498 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:05:35.548 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:35.713 > [DPL inverter 114190550241]:
18:05:36.014 > solar-powered, producing 263 W
18:05:36.026 > lower/current/upper limit: 50/800/800 W, output capability: 800 W
18:05:36.034 > sending commands enabled, reachable, eligible
18:05:36.040 > max reduction production/standby: 213/213 W, max increase: 24 W
18:05:36.126 > target limit/output/state: 50 W (update)/50 W/production, 0 update timeouts
18:05:36.181 > MPPTs AC power: a: 132 W b: 132 W
18:05:36.327 > [DPL inverter 114190550241]: sending limit of 6.2 % (50 W respectively), max output is 800 W
18:05:36.382 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:36.430 > RX Period End
18:05:36.500 > All missing
18:05:36.546 > Nothing received, resend whole request
18:05:36.635 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 53 00 00 00 00 00 00 00 00 86 B2 B9
18:05:36.737 > RX Period End
18:05:36.786 > All missing
18:05:36.832 > Nothing received, resend whole request
18:05:36.942 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 53 00 00 00 00 00 00 00 00 86 B2 B9
18:05:37.213 > RX Period End
18:05:37.225 > All missing
18:05:37.232 > Nothing received, resend whole request
18:05:37.352 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 53 00 00 00 00 00 00 00 00 86 B2 B9
18:05:37.405 > RX Period End
18:05:37.454 > All missing
18:05:37.499 > Nothing received, resend whole request
18:05:37.546 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 53 00 00 00 00 00 00 00 00 86 B2 B9
18:05:37.659 > RX Period End
18:05:37.732 > All missing
18:05:37.784 > Nothing received, resend count exeeded
18:05:37.899 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 53 00 00 00 00 00 00 00 00 5C A9 62
18:05:38.069 > RX Period End
18:05:38.120 > All missing
18:05:38.447 > Nothing received, resend whole request
18:05:38.460 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 53 00 00 00 00 00 00 00 00 5C A9 62
18:05:38.468 > RX Period End
18:05:38.475 > All missing
18:05:38.486 > Nothing received, resend whole request
18:05:38.581 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 53 00 00 00 00 00 00 00 00 5C A9 62
18:05:38.684 > [PowerMeterHttpJson] New total: -547.32
18:05:38.785 > RX Period End
18:05:38.888 > All missing
18:05:38.941 > Nothing received, resend whole request
18:05:38.999 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 53 00 00 00 00 00 00 00 00 5C A9 62
18:05:39.043 > RX Period End
18:05:39.196 > All missing
18:05:39.262 > Nothing received, resend whole request
18:05:39.309 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 53 00 00 00 00 00 00 00 00 5C A9 62
18:05:39.358 > RX Period End
18:05:39.742 > All missing
18:05:39.757 > Nothing received, resend count exeeded
18:05:39.765 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 53 00 00 00 00 00 00 00 00 48 BD 76
18:05:39.780 > RX Period End
18:05:39.831 > All missing
18:05:39.879 > Nothing received, resend whole request
18:05:40.024 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 53 00 00 00 00 00 00 00 00 48 BD 76
18:05:40.330 > RX Period End
18:05:40.385 > All missing
18:05:40.526 > Nothing received, resend whole request
18:05:40.582 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 53 00 00 00 00 00 00 00 00 48 BD 76
18:05:40.626 > RX Period End
18:05:40.680 > All missing
18:05:40.960 > Nothing received, resend whole request
18:05:40.973 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 53 00 00 00 00 00 00 00 00 48 BD 76
18:05:40.980 > RX Period End
18:05:40.987 > All missing
18:05:41.140 > Nothing received, resend whole request
18:05:41.273 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 53 00 00 00 00 00 00 00 00 48 BD 76
18:05:41.320 > RX Period End
18:05:41.380 > All missing
18:05:41.433 > Nothing received, resend count exeeded
18:05:41.484 > TX ActivePowerControl Channel: 75 --> 51 90 55 02 41 80 18 83 32 81 0B 00 00 3E 00 01 6C A1 86
18:05:41.533 > Interrupt received
18:05:41.581 > RX Channel: 3 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
18:05:41.756 > [PowerMeterHttpJson] New total: -202.68
18:05:41.803 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:41.852 > RX Period End
18:05:41.896 > Success
18:05:42.177 > Fetch inverter: 114190550241
18:05:42.190 > [DPL inverter 114190550241]: actual limit is 6.2 % (50 W respectively), effective 10347 ms after update started, requested were 6.2 %
18:05:42.197 > [DPL] waiting for sufficiently recent inverter data
18:05:42.267 > TX RealTimeRunData Channel: 3 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 5D 00 00 00 00 00 00 00 00 E6 FE 39
18:05:42.322 > Interrupt received
18:05:42.472 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BB 01 C1 07 A6 01 BB 01 B1 07 65 00 07 21 | -80 dBm
18:05:42.573 > Interrupt received
18:05:42.622 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 02 80 A8 00 07 37 0C 05 42 05 30 08 D9 13 86 0E 52 E9 | -80 dBm
18:05:42.671 > Interrupt received
18:05:42.779 > RX Channel: 23 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 A1 03 E8 01 05 00 07 EF 6B DB | -80 dBm
18:05:42.832 > RX Period End
18:05:42.881 > Success
18:05:42.954 > [DPL] waiting for sufficiently recent power meter reading
18:05:43.093 > [PowerMeterHttpJson] New total: 198.57
18:05:43.134 > [DPL] targeting 0 W, base load is 100 W, power meter reads 198.6 W (valid)
18:05:43.385 > [DPL] inverter 114190550241 is behind power meter producing 366 W
18:05:43.398 > [DPL] requesting 565 W from 1 solar-powered inverter currently producing 366 W (diff 199 W, hysteresis 10 W)
18:05:43.406 > [DPL] will cover 565 W using 1 solar-powered inverter
18:05:43.418 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:05:43.469 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:43.526 > [DPL inverter 114190550241]:
18:05:43.701 > solar-powered, producing 366 W
18:05:43.752 > lower/current/upper limit: 50/49/800 W, output capability: 800 W
18:05:43.824 > sending commands enabled, reachable, eligible
18:05:44.009 > max reduction production/standby: 0/0 W, max increase: 434 W
18:05:44.110 > target limit/output/state: 565 W (update)/565 W/production, 0 update timeouts
18:05:44.212 > MPPTs AC power: a: 186 W b: 180 W
18:05:44.264 > [DPL inverter 114190550241]: sending limit of 70.6 % (565 W respectively), max output is 800 W
18:05:44.353 > TX ActivePowerControl Channel: 23 --> 51 90 55 02 41 80 18 83 32 81 0B 00 02 C2 00 01 E4 60 31
18:05:44.649 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:44.662 > RX Period End
18:05:44.669 > All missing
18:05:44.724 > Nothing received, resend whole request
18:05:44.772 > TX ActivePowerControl Channel: 40 --> 51 90 55 02 41 80 18 83 32 81 0B 00 02 C2 00 01 E4 60 31
18:05:44.820 > RX Period End
18:05:44.884 > All missing
18:05:44.930 > Nothing received, resend whole request
18:05:44.978 > TX ActivePowerControl Channel: 61 --> 51 90 55 02 41 80 18 83 32 81 0B 00 02 C2 00 01 E4 60 31
18:05:45.141 > Interrupt received
18:05:45.235 > RX Channel: 3 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
18:05:45.286 > [PowerMeterHttpJson] New total: -333.81
18:05:45.344 > RX Period End
18:05:45.408 > Success
18:05:45.463 > Fetch inverter: 114184847551
18:05:45.645 > Request SystemConfigPara
18:05:45.877 > [DPL inverter 114190550241]: actual limit is 70.6 % (565 W respectively), effective 6090 ms after update started, requested were 70.6 %
18:05:45.891 > [DPL] waiting for sufficiently recent inverter data
18:05:45.899 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 68 00 00 00 00 00 00 00 00 B7 95 94
18:05:45.905 > RX Period End
18:05:46.056 > All missing
18:05:46.109 > Nothing received, resend whole request
18:05:46.261 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 68 00 00 00 00 00 00 00 00 B7 95 94
18:05:46.365 > RX Period End
18:05:46.435 > All missing
18:05:46.568 > Nothing received, resend whole request
18:05:46.694 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 68 00 00 00 00 00 00 00 00 B7 95 94
18:05:46.744 > RX Period End
18:05:47.129 > All missing
18:05:47.142 > Nothing received, resend whole request
18:05:47.149 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 68 00 00 00 00 00 00 00 00 B7 95 94
18:05:47.182 > RX Period End
18:05:47.230 > All missing
18:05:47.281 > Nothing received, resend whole request
18:05:47.329 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 68 00 00 00 00 00 00 00 00 B7 95 94
18:05:47.414 > RX Period End
18:05:47.470 > All missing
18:05:47.529 > Nothing received, resend count exeeded
18:05:47.640 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 68 00 00 00 00 00 00 00 00 6D 8E 4F
18:05:48.453 > RX Period End
18:05:48.503 > All missing
18:05:48.615 > Nothing received, resend whole request
18:05:48.664 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 68 00 00 00 00 00 00 00 00 6D 8E 4F
18:05:48.820 > [PowerMeterHttpJson] New total: -311.74
18:05:49.273 > RX Period End
18:05:49.355 > All missing
18:05:49.733 > Nothing received, resend whole request
18:05:49.750 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 68 00 00 00 00 00 00 00 00 6D 8E 4F
18:05:50.296 > RX Period End
18:05:50.352 > All missing
18:05:50.430 > Nothing received, resend whole request
18:05:50.524 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 68 00 00 00 00 00 00 00 00 6D 8E 4F
18:05:51.100 > RX Period End
18:05:51.206 > All missing
18:05:51.251 > Nothing received, resend whole request
18:05:51.305 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 68 00 00 00 00 00 00 00 00 6D 8E 4F
18:05:51.853 > RX Period End
18:05:51.912 > All missing
18:05:52.173 > Nothing received, resend count exeeded
18:05:52.186 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 68 00 00 00 00 00 00 00 00 79 9A 5B
18:05:52.194 > RX Period End
18:05:52.303 > All missing
18:05:52.426 > Nothing received, resend whole request
18:05:52.477 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 68 00 00 00 00 00 00 00 00 79 9A 5B
18:05:52.533 > RX Period End
18:05:52.586 > All missing
18:05:52.634 > Nothing received, resend whole request
18:05:52.682 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 68 00 00 00 00 00 00 00 00 79 9A 5B
18:05:52.746 > RX Period End
18:05:52.917 > All missing
18:05:52.968 > Nothing received, resend whole request
18:05:53.016 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 68 00 00 00 00 00 00 00 00 79 9A 5B
18:05:53.068 > RX Period End
18:05:53.119 > All missing
18:05:53.427 > Nothing received, resend whole request
18:05:53.440 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 68 00 00 00 00 00 00 00 00 79 9A 5B
18:05:53.447 > RX Period End
18:05:53.454 > All missing
18:05:53.461 > Nothing received, resend count exeeded
18:05:53.487 > Fetch inverter: 114190550241
18:05:53.537 > TX RealTimeRunData Channel: 75 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 71 00 00 00 00 00 00 00 00 27 32 18
18:05:53.633 > Interrupt received
18:05:53.738 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BA 02 B2 0B E3 01 BA 02 A9 0B BA 00 07 D0 | -80 dBm
18:05:53.787 > Interrupt received
18:05:53.864 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 83 00 00 00 FD 03 E8 01 05 00 07 61 A2 C0 | -80 dBm
18:05:53.940 > [PowerMeterHttpJson] New total: -308.83
18:05:54.042 > RX Period End
18:05:54.091 > Middle missing
18:05:54.143 > Request retransmit: 2
18:05:54.248 > TX RequestFrame Channel: 3 --> 15 90 55 02 41 80 18 83 32 82 38
18:05:54.302 > RX Period End
18:05:54.372 > Middle missing
18:05:54.426 > Request retransmit: 2
18:05:54.695 > TX RequestFrame Channel: 23 --> 15 90 55 02 41 80 18 83 32 82 38
18:05:54.709 > Interrupt received
18:05:54.716 > RX Channel: 40 --> 95 90 55 02 41 90 55 02 41 02 80 A9 00 07 37 0D 05 43 05 31 08 E1 13 88 16 7B EE | -80 dBm
18:05:54.723 > RX Period End
18:05:54.760 > Success
18:05:54.833 > [DPL] waiting for sufficiently recent power meter reading
18:05:58.112 > Fetch inverter: 114184847551
18:05:58.165 > Request SystemConfigPara
18:05:58.227 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 76 00 00 00 00 00 00 00 00 17 14 AB
18:05:58.521 > [PowerMeterHttpJson] New total: -309.17
18:05:58.652 > [DPL] targeting 0 W, base load is 100 W, power meter reads -309.2 W (valid)
18:05:58.702 > [DPL] inverter 114190550241 is behind power meter producing 575 W
18:05:58.750 > [DPL] requesting 266 W from 1 solar-powered inverter currently producing 575 W (diff -309 W, hysteresis 10 W)
18:05:58.801 > [DPL] will cover 266 W using 1 solar-powered inverter
18:05:58.849 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:05:58.900 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:05:58.951 > [DPL inverter 114190550241]:
18:05:59.216 > solar-powered, producing 575 W
18:05:59.228 > lower/current/upper limit: 50/564/800 W, output capability: 800 W
18:05:59.236 > sending commands enabled, reachable, eligible
18:05:59.290 > max reduction production/standby: 525/525 W, max increase: 225 W
18:05:59.351 > target limit/output/state: 266 W (update)/266 W/production, 0 update timeouts
18:05:59.431 > MPPTs AC power: a: 290 W b: 286 W
18:05:59.572 > [DPL inverter 114190550241]: sending limit of 33.2 % (266 W respectively), max output is 800 W
18:05:59.624 > [DPL] waiting for a start/stop/restart/limit command to complete
18:05:59.675 > RX Period End
18:05:59.797 > All missing
18:05:59.855 > Nothing received, resend whole request
18:05:59.907 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 76 00 00 00 00 00 00 00 00 17 14 AB
18:06:00.424 > RX Period End
18:06:00.436 > All missing
18:06:00.446 > Nothing received, resend whole request
18:06:00.454 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 76 00 00 00 00 00 00 00 00 17 14 AB
18:06:00.492 > RX Period End
18:06:00.542 > All missing
18:06:00.594 > Nothing received, resend whole request
18:06:00.700 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 76 00 00 00 00 00 00 00 00 17 14 AB
18:06:00.801 > RX Period End
18:06:00.903 > All missing
18:06:00.955 > Nothing received, resend whole request
18:06:01.007 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 76 00 00 00 00 00 00 00 00 17 14 AB
18:06:01.055 > RX Period End
18:06:01.112 > All missing
18:06:01.215 > Nothing received, resend count exeeded
18:06:01.282 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 76 00 00 00 00 00 00 00 00 CD 0F 70
18:06:01.719 > RX Period End
18:06:01.796 > All missing
18:06:01.848 > Nothing received, resend whole request
18:06:01.898 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 76 00 00 00 00 00 00 00 00 CD 0F 70
18:06:02.520 > RX Period End
18:06:02.645 > All missing
18:06:02.908 > Nothing received, resend whole request
18:06:02.926 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 76 00 00 00 00 00 00 00 00 CD 0F 70
18:06:03.329 > RX Period End
18:06:03.385 > All missing
18:06:03.435 > Nothing received, resend whole request
18:06:03.485 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 76 00 00 00 00 00 00 00 00 CD 0F 70
18:06:03.535 > [PowerMeterHttpJson] New total: -307.68
18:06:04.195 > RX Period End
18:06:04.209 > All missing
18:06:04.223 > Nothing received, resend whole request
18:06:04.272 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 76 00 00 00 00 00 00 00 00 CD 0F 70
18:06:04.877 > RX Period End
18:06:04.937 > All missing
18:06:04.980 > Nothing received, resend count exeeded
18:06:05.139 > TX SystemConfigPara Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 76 00 00 00 00 00 00 00 00 D9 1B 64
18:06:05.469 > RX Period End
18:06:05.484 > All missing
18:06:05.496 > Nothing received, resend whole request
18:06:05.543 > TX SystemConfigPara Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 76 00 00 00 00 00 00 00 00 D9 1B 64
18:06:05.646 > RX Period End
18:06:05.695 > All missing
18:06:05.747 > Nothing received, resend whole request
18:06:05.798 > TX SystemConfigPara Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 76 00 00 00 00 00 00 00 00 D9 1B 64
18:06:05.899 > RX Period End
18:06:05.947 > All missing
18:06:05.996 > Nothing received, resend whole request
18:06:06.048 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 76 00 00 00 00 00 00 00 00 D9 1B 64
18:06:06.158 > RX Period End
18:06:06.242 > All missing
18:06:06.331 > Nothing received, resend whole request
18:06:06.385 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 76 00 00 00 00 00 00 00 00 D9 1B 64
18:06:06.431 > RX Period End
18:06:06.803 > All missing
18:06:06.823 > Nothing received, resend count exeeded
18:06:06.833 > TX ActivePowerControl Channel: 40 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 4C 00 01 8B 00 B3
18:06:08.401 > RX Period End
18:06:08.465 > All missing
18:06:08.583 > Nothing received, resend whole request
18:06:08.689 > TX ActivePowerControl Channel: 61 --> 51 90 55 02 41 80 18 83 32 81 0B 00 01 4C 00 01 8B 00 B3
18:06:08.742 > Interrupt received
18:06:08.792 > RX Channel: 3 --> D1 90 55 02 41 90 55 02 41 81 00 00 0B 00 14 07 48 | -80 dBm
18:06:08.842 > [PowerMeterHttpJson] New total: -14.30
18:06:08.910 > [DPL] waiting for a start/stop/restart/limit command to complete
18:06:10.418 > RX Period End
18:06:10.632 > Success
18:06:10.734 > Fetch inverter: 114190550241
18:06:10.838 > [DPL inverter 114190550241]: actual limit is 33.2 % (266 W respectively), effective 11891 ms after update started, requested were 33.2 %
18:06:10.906 > [DPL] waiting for sufficiently recent inverter data
18:06:11.046 > TX RealTimeRunData Channel: 75 --> 15 90 55 02 41 80 18 83 32 80 0B 00 67 9B B1 82 00 00 00 00 00 00 00 00 D3 22 0F
18:06:11.093 > Interrupt received
18:06:11.144 > RX Channel: 3 --> 95 90 55 02 41 90 55 02 41 01 00 01 01 BA 01 47 05 A0 01 BB 01 45 05 98 00 07 A9 | -80 dBm
18:06:11.195 > Interrupt received
18:06:11.244 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 02 80 AA 00 07 37 0E 05 44 05 32 08 C9 13 85 0A AD 05 | -80 dBm
18:06:11.299 > Interrupt received
18:06:11.623 > RX Channel: 75 --> 95 90 55 02 41 90 55 02 41 83 00 02 00 79 03 E8 01 05 00 07 BD 14 2C | -80 dBm
18:06:11.637 > RX Period End
18:06:11.645 > Success
18:06:11.652 > [DPL] waiting for sufficiently recent power meter reading
18:06:13.532 > [PowerMeterHttpJson] New total: -3.40
18:06:13.584 > [DPL] targeting 0 W, base load is 100 W, power meter reads -3.4 W (valid)
18:06:13.635 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:06:13.684 > [DPL] requesting 270 W from 1 solar-powered inverter currently producing 273 W (diff -3 W, hysteresis 10 W)
18:06:13.735 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:06:13.786 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:06:13.836 > [DPL inverter 114190550241]:
18:06:14.051 > solar-powered, producing 273 W
18:06:14.065 > lower/current/upper limit: 50/265/800 W, output capability: 800 W
18:06:14.113 > sending commands enabled, reachable, eligible
18:06:14.170 > max reduction production/standby: 223/223 W, max increase: 527 W
18:06:14.219 > target limit/output/state: -1 W (unchanged)/273 W/unchanged, 0 update timeouts
18:06:14.269 > MPPTs AC power: a: 137 W b: 136 W
18:06:14.318 > [DPL] the system is stable, the last power limit is still valid
18:06:14.370 > [DPL] targeting 0 W, base load is 100 W, power meter reads -3.4 W (valid)
18:06:14.443 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:06:14.514 > [DPL] requesting 270 W from 1 solar-powered inverter currently producing 273 W (diff -3 W, hysteresis 10 W)
18:06:14.627 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:06:14.677 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:06:14.732 > [DPL inverter 114190550241]:
18:06:14.831 > solar-powered, producing 273 W
18:06:14.906 > lower/current/upper limit: 50/265/800 W, output capability: 800 W
18:06:14.960 > sending commands enabled, reachable, eligible
18:06:15.013 > max reduction production/standby: 223/223 W, max increase: 527 W
18:06:15.303 > target limit/output/state: -1 W (unchanged)/273 W/unchanged, 0 update timeouts
18:06:15.318 > MPPTs AC power: a: 137 W b: 136 W
18:06:15.326 > [DPL] targeting 0 W, base load is 100 W, power meter reads -3.4 W (valid)
18:06:15.342 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:06:15.409 > [DPL] requesting 270 W from 1 solar-powered inverter currently producing 273 W (diff -3 W, hysteresis 10 W)
18:06:15.463 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:06:15.513 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:06:15.565 > [DPL inverter 114190550241]:
18:06:15.671 > solar-powered, producing 273 W
18:06:15.742 > lower/current/upper limit: 50/265/800 W, output capability: 800 W
18:06:15.796 > sending commands enabled, reachable, eligible
18:06:15.851 > max reduction production/standby: 223/223 W, max increase: 527 W
18:06:15.911 > target limit/output/state: -1 W (unchanged)/273 W/unchanged, 0 update timeouts
18:06:15.965 > MPPTs AC power: a: 137 W b: 136 W
18:06:16.013 > Fetch inverter: 114184847551
18:06:16.062 > Request SystemConfigPara
18:06:16.111 > TX RealTimeRunData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 87 00 00 00 00 00 00 00 00 83 1D C7
18:06:16.162 > [DPL] targeting 0 W, base load is 100 W, power meter reads -3.4 W (valid)
18:06:16.217 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:06:16.263 > [DPL] requesting 270 W from 1 solar-powered inverter currently producing 273 W (diff -3 W, hysteresis 10 W)
18:06:16.544 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:06:16.559 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:06:16.565 > [DPL inverter 114190550241]:
18:06:16.573 > solar-powered, producing 273 W
18:06:16.580 > lower/current/upper limit: 50/265/800 W, output capability: 800 W
18:06:16.674 > sending commands enabled, reachable, eligible
18:06:16.726 > max reduction production/standby: 223/223 W, max increase: 527 W
18:06:16.780 > target limit/output/state: -1 W (unchanged)/273 W/unchanged, 0 update timeouts
18:06:16.828 > MPPTs AC power: a: 137 W b: 136 W
18:06:16.881 > RX Period End
18:06:16.930 > All missing
18:06:16.986 > Nothing received, resend whole request
18:06:17.082 > TX RealTimeRunData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 87 00 00 00 00 00 00 00 00 83 1D C7
18:06:17.137 > RX Period End
18:06:17.313 > All missing
18:06:17.365 > Nothing received, resend whole request
18:06:17.434 > TX RealTimeRunData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 87 00 00 00 00 00 00 00 00 83 1D C7
18:06:17.482 > [DPL] targeting 0 W, base load is 100 W, power meter reads -3.4 W (valid)
18:06:17.531 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:06:17.810 > [DPL] requesting 270 W from 1 solar-powered inverter currently producing 273 W (diff -3 W, hysteresis 10 W)
18:06:17.824 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:06:17.830 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:06:17.838 > [DPL inverter 114190550241]:
18:06:17.903 > solar-powered, producing 273 W
18:06:17.950 > lower/current/upper limit: 50/265/800 W, output capability: 800 W
18:06:17.998 > sending commands enabled, reachable, eligible
18:06:18.053 > max reduction production/standby: 223/223 W, max increase: 527 W
18:06:18.100 > target limit/output/state: -1 W (unchanged)/273 W/unchanged, 0 update timeouts
18:06:18.149 > MPPTs AC power: a: 137 W b: 136 W
18:06:18.199 > RX Period End
18:06:18.251 > All missing
18:06:18.302 > Nothing received, resend whole request
18:06:18.349 > TX RealTimeRunData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 87 00 00 00 00 00 00 00 00 83 1D C7
18:06:18.400 > RX Period End
18:06:18.454 > All missing
18:06:18.504 > Nothing received, resend whole request
18:06:18.572 > TX RealTimeRunData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 0B 00 67 9B B1 87 00 00 00 00 00 00 00 00 83 1D C7
18:06:18.624 > [DPL] targeting 0 W, base load is 100 W, power meter reads -3.4 W (valid)
18:06:18.722 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:06:18.797 > [DPL] requesting 270 W from 1 solar-powered inverter currently producing 273 W (diff -3 W, hysteresis 10 W)
18:06:19.047 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:06:19.064 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:06:19.071 > [DPL inverter 114190550241]:
18:06:19.130 > solar-powered, producing 273 W
18:06:19.185 > lower/current/upper limit: 50/265/800 W, output capability: 800 W
18:06:19.234 > sending commands enabled, reachable, eligible
18:06:19.304 > max reduction production/standby: 223/223 W, max increase: 527 W
18:06:19.354 > target limit/output/state: -1 W (unchanged)/273 W/unchanged, 0 update timeouts
18:06:19.401 > MPPTs AC power: a: 137 W b: 136 W
18:06:19.457 > RX Period End
18:06:19.530 > All missing
18:06:19.562 > Nothing received, resend count exeeded
18:06:19.608 > TX AlarmData Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 87 00 00 00 00 00 00 00 00 59 06 1C
18:06:19.661 > [PowerMeterHttpJson] New total: -10.77
18:06:19.709 > [DPL] targeting 0 W, base load is 100 W, power meter reads -10.8 W (valid)
18:06:19.776 > [DPL] inverter 114190550241 is behind power meter producing 273 W
18:06:19.825 > [DPL] requesting 262 W from 1 solar-powered inverter currently producing 273 W (diff -11 W, hysteresis 10 W)
18:06:19.877 > [DPL] will cover 262 W using 1 solar-powered inverter
18:06:19.927 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
18:06:20.457 > [DPL] requesting 0 W from 0 battery-powered inverters currently producing 0 W (diff 0 W, hysteresis 10 W)
18:06:20.472 > [DPL inverter 114190550241]:
18:06:20.479 > solar-powered, producing 273 W
18:06:20.487 > lower/current/upper limit: 50/265/800 W, output capability: 800 W
18:06:20.565 > sending commands enabled, reachable, eligible
18:06:20.671 > max reduction production/standby: 223/223 W, max increase: 527 W
18:06:20.720 > target limit/output/state: 262 W (update)/262 W/production, 0 update timeouts
18:06:20.768 > MPPTs AC power: a: 137 W b: 136 W
18:06:20.830 > [DPL inverter 114190550241]: sending limit of 32.8 % (262 W respectively), max output is 800 W
18:06:20.975 > [DPL] waiting for a start/stop/restart/limit command to complete
18:06:21.022 > RX Period End
18:06:21.073 > All missing
18:06:21.121 > Nothing received, resend whole request
18:06:21.172 > TX AlarmData Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 87 00 00 00 00 00 00 00 00 59 06 1C
18:06:21.222 > RX Period End
18:06:21.354 > All missing
18:06:21.405 > Nothing received, resend whole request
18:06:21.455 > TX AlarmData Channel: 40 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 87 00 00 00 00 00 00 00 00 59 06 1C
18:06:21.509 > RX Period End
18:06:21.563 > All missing
18:06:21.812 > Nothing received, resend whole request
18:06:21.826 > TX AlarmData Channel: 61 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 87 00 00 00 00 00 00 00 00 59 06 1C
18:06:21.834 > RX Period End
18:06:21.855 > All missing
18:06:21.914 > Nothing received, resend whole request
18:06:21.960 > TX AlarmData Channel: 75 --> 15 84 84 75 51 80 18 83 32 80 11 00 67 9B B1 87 00 00 00 00 00 00 00 00 59 06 1C
18:06:22.189 > RX Period End
18:06:22.261 > All missing
18:06:22.309 > Nothing received, resend count exeeded
18:06:22.438 > TX SystemConfigPara Channel: 3 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 87 00 00 00 00 00 00 00 00 4D 12 08
18:06:22.674 > RX Period End
18:06:22.724 > All missing
18:06:22.780 > Nothing received, resend whole request
18:06:23.071 > TX SystemConfigPara Channel: 23 --> 15 84 84 75 51 80 18 83 32 80 05 00 67 9B B1 87 00 00 00 00 00 00 00 00 4D 12 08
18:06:23.084 > RX Period End

Sorbat Jan 30, 2025

In deinem log steht:

18:05:31.041 > [PowerMeterHttpJson] New total: 2081.63

Hast du eine Idee, warum das so sein könnte? Das passt ja nicht so richtig zu dem Graphen aus HA

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Nulleinspeisung heftige Überschwinger bei Lastwechsel #1592

{{title}}

Replies: 1 comment 7 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Nulleinspeisung heftige Überschwinger bei Lastwechsel #1592

dk7td Jan 29, 2025

Replies: 1 comment · 7 replies

schlimmchen Jan 30, 2025 Maintainer

dk7td Jan 30, 2025 Author

Sorbat Jan 30, 2025

dk7td Jan 30, 2025 Author

dk7td Jan 30, 2025 Author

Sorbat Jan 30, 2025

dk7td
Jan 29, 2025

Replies: 1 comment 7 replies

schlimmchen
Jan 30, 2025
Maintainer

dk7td Jan 30, 2025
Author

dk7td Jan 30, 2025
Author

dk7td Jan 30, 2025
Author