Replies: 5 comments 6 replies
-
Sure, can you try with another keyboard first to test the board is operating properly? Are you running the latest firmware? If yes on both, another thing you can try is the DIP switch under the keyboard, switch 2 to ON (NKRO off). Any luck? |
Beta Was this translation helpful? Give feedback.
-
Thank you for the quick reply. I have tried 2 another keyboards , a Corsair Vengeance K90 (didnt work) and a Anne Pro 2 (it works perfectly). I used the 0.62 version on both pcbs.Regardning the Ducky 3 ONE It doesnt seem to be any diffrence with the dip switch nr 2 in off or on, nor any of the other switches. The strange part is that the pcb LED behave exactly the same when all 3 keyboards are connected.z |
Beta Was this translation helpful? Give feedback.
-
Hmmm, that sucks. Could you dump the hid descriptor (with your keyboard plugged directly into the computer), "usbhid-dump -e descriptor" and paste the output please? |
Beta Was this translation helpful? Give feedback.
-
Try this perhaps: https://github.com/todbot/win-hid-dump - releases section maybe has a pre-built binary... |
Beta Was this translation helpful? Give feedback.
-
@edmuff would you be so kind to check/test solution suggested in #142 (comment) and provide feedback? |
Beta Was this translation helpful? Give feedback.
-
Hi, i love the deskhop and really want to use it. but my Ducky 3 keaboard doesnt work at all. It lights up and the board on the deskhop flashes, but no inputs work. Any ideas on making work?
BR Niklas
Beta Was this translation helpful? Give feedback.
All reactions