| layout | title | date | categories | tags | excerpt |
|---|---|---|---|---|---|
post |
Equal Cost Multipath(ECMP) practice base on Quagga |
2015-10-29 11:16:30 -0700 |
Linux |
network ecmp quagga |
Equal Cost Multipath(ECMP) practice base on Quagga |
** client: **
- yy1(172.17.42.2/16, gateway 172.17.42.1/16)
- yy3(172.18.42.2/16, gateway 172.18.42.1/16)
** router: **
- router-17(172.17.42.1/16, 192.168.0.2/24, 192.168.1.2/24)
- router-18(172.18.42.1/16, 192.168.0.3/24, 192.168.1.3/24)
整个网络结构大致如下：
# cat /etc/quagga/zebra.conf
hostname router-17
password zebra
enable password zebra
#service quagga start
[root@router-17 ~]# vtysh
Hello, this is Quagga (version 0.99.22.4).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
router-18# configure terminal
router-18(config)# log file /var/log/quagga/quagga.log
router-18(config)# exit
router-18# write
Building Configuration...
Configuration saved to /etc/quagga/zebra.conf
[OK]# cat /etc/quagga/ospfd.conf
! -*- ospf -*-
!
! OSPFd sample configuration file
!
!
hostname router-17
password zebra
enable password zebra
!
!router ospf
! network 192.168.1.0/24 area 0
!
log stdout
#启动ospfd
# service ospfd start** 配置网络 **
配置router-17的网络
router-17# configure terminal
router-17(config)# router ospf
router-17(config-router)# router-id 192.168.1.2
router-17(config-router)# network 192.168.0.0/24 area 0
router-17(config-router)# network 192.168.1.0/24 area 0
router-17(config-router)# network 172.17.0.0/16 area 0
router-17(config-router)# do write配置router-18的网络
router-18# configure terminal
router-18(config)# router ospf
router-18(config-router)# router-id 192.168.1.3
router-18(config-router)# network 192.168.0.0/24 area 0
router-18(config-router)# network 192.168.1.0/24 area 0
router-18(config-router)# network 172.18.0.0/16 area 0
router-18(config-router)# do write** 查看路由 **
router-17# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, A - Babel,
> - selected route, * - FIB route
C>* 127.0.0.0/8 is directly connected, lo
O 172.17.0.0/16 [110/10] is directly connected, eth0, 00:04:55
C>* 172.17.0.0/16 is directly connected, eth0
O>* 172.18.0.0/16 [110/20] via 192.168.0.3, eth1, 00:00:48
* via 192.168.1.3, eth2, 00:00:48
O 192.168.0.0/24 [110/10] is directly connected, eth1, 00:05:08
C>* 192.168.0.0/24 is directly connected, eth1
O 192.168.1.0/24 [110/10] is directly connected, eth2, 00:05:01
C>* 192.168.1.0/24 is directly connected, eth2
router-18# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, A - Babel,
> - selected route, * - FIB route
C>* 127.0.0.0/8 is directly connected, lo
O>* 172.17.0.0/16 [110/20] via 192.168.0.2, eth1, 00:00:19
* via 192.168.1.2, eth2, 00:00:19
O 172.18.0.0/16 [110/10] is directly connected, eth0, 00:00:17
C>* 172.18.0.0/16 is directly connected, eth0
O 192.168.0.0/24 [110/10] is directly connected, eth1, 00:00:27
C>* 192.168.0.0/24 is directly connected, eth1
O 192.168.1.0/24 [110/10] is directly connected, eth2, 00:00:22
C>* 192.168.1.0/24 is directly connected, eth2
[root@router-17 ~]# ip route show
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.42.1
172.18.0.0/16 proto zebra metric 20
nexthop via 192.168.0.3 dev eth1 weight 1
nexthop via 192.168.1.3 dev eth2 weight 1
192.168.0.0/24 dev eth1 proto kernel scope link src 192.168.0.2
192.168.1.0/24 dev eth2 proto kernel scope link src 192.168.1.2
[root@router-18 ~]# ip route show
172.17.0.0/16 proto zebra metric 20
nexthop via 192.168.0.2 dev eth1 weight 1
nexthop via 192.168.1.2 dev eth2 weight 1
172.18.0.0/16 dev eth0 proto kernel scope link src 172.18.42.1
192.168.0.0/24 dev eth1 proto kernel scope link src 192.168.0.3
192.168.1.0/24 dev eth2 proto kernel scope link src 192.168.1.3[root@yy3 ~]# ping 172.17.42.2
PING 172.17.42.2 (172.17.42.2) 56(84) bytes of data.
64 bytes from 172.17.42.2: icmp_seq=1 ttl=62 time=0.354 ms
64 bytes from 172.17.42.2: icmp_seq=2 ttl=62 time=0.323 ms
[root@yy3 ~]# traceroute 172.17.42.2
traceroute to 172.17.42.2 (172.17.42.2), 30 hops max, 60 byte packets
1 172.18.42.1 (172.18.42.1) 0.452 ms 0.382 ms 0.332 ms
2 192.168.0.2 (192.168.0.2) 0.285 ms 0.339 ms 0.284 ms
3 172.17.42.2 (172.17.42.2) 0.430 ms 0.374 ms 0.324 ms
[root@yy1 ~]# traceroute 172.18.42.2
traceroute to 172.18.42.2 (172.18.42.2), 30 hops max, 60 byte packets
1 172.17.42.1 (172.17.42.1) 0.137 ms 0.081 ms 0.070 ms
2 192.168.1.3 (192.168.1.3) 0.190 ms 0.153 ms 0.173 ms
3 172.18.42.2 (172.18.42.2) 0.371 ms 0.309 ms 0.274 ms可以看到，yy3->yy1与yy1->yy3两边走的路径并不一样。
关掉router-18的eth1接口
router-18# configure terminal
router-18(config)# interface eth1
router-18(config-if)# shutdown
router-18(config-if)# exit
router-18(config)# exit
router-18# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, A - Babel,
> - selected route, * - FIB route
C>* 127.0.0.0/8 is directly connected, lo
O>* 172.17.0.0/16 [110/20] via 192.168.1.2, eth2, 00:00:19
O 172.18.0.0/16 [110/10] is directly connected, eth0, 01:18:13
C>* 172.18.0.0/16 is directly connected, eth0
O>* 192.168.0.0/24 [110/20] via 192.168.1.2, eth2, 00:00:19
O 192.168.1.0/24 [110/10] is directly connected, eth2, 01:18:18
C>* 192.168.1.0/24 is directly connected, eth2查看路由
[root@router-18 ~]# ip route list
172.17.0.0/16 via 192.168.1.2 dev eth2 proto zebra metric 20
172.18.0.0/16 dev eth0 proto kernel scope link src 172.18.42.1
192.168.0.0/24 via 192.168.1.2 dev eth2 proto zebra metric 20
192.168.1.0/24 dev eth2 proto kernel scope link src 192.168.1.3
[root@yy3 ~]# traceroute 172.17.42.2
traceroute to 172.17.42.2 (172.17.42.2), 30 hops max, 60 byte packets
1 172.18.42.1 (172.18.42.1) 0.439 ms 0.373 ms 0.323 ms
2 192.168.1.2 (192.168.1.2) 0.246 ms 0.196 ms 0.149 ms
3 172.17.42.2 (172.17.42.2) 0.369 ms 0.326 ms 0.281 ms可以看到yy3->yy1的路径发生了变化。
Router必须开启ip转发：
# cat /proc/sys/net/ipv4/ip_forward
1Router作为网关的接口必须开启arp proxy：
# cat /proc/sys/net/ipv4/conf/eth0/proxy_arp
1清除所有接口arp缓存
# ip neigh flush dev eth0