Air unit O3, speedeybee F405 WING, INAV 7.1.2: Crosshair and horizon sidebar in OSD not in middle of google2 screen

[samsab1]

hello
MSP displayport on UART5, BF43COMP on OSD; impossible to get the cross air and horizon in the middle of the screen.
is there something to do?
best regards

[mmosca]

If your goggles are setup for hd, you should BFHDCOMP instead of BF43COMP.

[samsab1]

i tried that too. same result, not centered on google2

[samsab1]

The others paramesters are diplayed where it should be, except cross hair and horizon sidebar........

[samsab1]

why do you close this thread?; it 's not solved from my point of view.

[mmosca]

Issues are for bugs. This is a configuration issue.

BF43COMP requires DJI goggles to be setup for non-hd osd.
If the goggles are setup for HD osd, you need to use the HD option instead.

[samsab1]

thanks mmosca.
on my config: O3 + googles2, i have only one option canvas: HD
so HD is applied on my google, if i understand well what you are talking about.
by the way, i have to say that on my quad with an other 03 (speedybee f405 v4, INAV 7.1.2), there is absolutly no pb with osd....that's why i am really confused

[mmosca]

The option in both INAV and your DJI goggles need to agree. They both need to be set to HD.

[samsab1]

so can you confirm the config above?

inav 7.1.2
uart5: MSP DISPLAY
OSD: BFHD

Google2 canvas: HD

is that coherent?

[samsab1]

don't ask why, but now it works as it should.....
thanks again for your help
i was struggeling since 48 hours, but now, it works, so strange.