You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have a tricopter LR with a kakuteF7 and tekko32 ESC, the servo is a digital ES3054 from Emax.
I flashed the FC with iNAV and the tricopter setup, I did the calibration but the heading is drifting one degree at a time every 15 seconds or so, still in the same direction.
I also have the tail motor going 100 percent when moving the throttle up a little while other motors behave normaly (dshot 600). When at 100 it is stuck and the only way to stop it is by disarming the drone. Something with the pitch maybe ?
I will try multishot.
This discussion was converted from issue #6521 on February 02, 2021 07:54.
Heading
Bold
Italic
Quote
Code
Link
Numbered list
Unordered list
Task list
Attach files
Mention
Reference
Menu
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hello,
I have a tricopter LR with a kakuteF7 and tekko32 ESC, the servo is a digital ES3054 from Emax.
I flashed the FC with iNAV and the tricopter setup, I did the calibration but the heading is drifting one degree at a time every 15 seconds or so, still in the same direction.
I also have the tail motor going 100 percent when moving the throttle up a little while other motors behave normaly (dshot 600). When at 100 it is stuck and the only way to stop it is by disarming the drone. Something with the pitch maybe ?
I will try multishot.
If someone can point me in the right direction...
Regards,
Beta Was this translation helpful? Give feedback.
All reactions