config.toml

# The global section has parameters that apply globally to the relayer operation.
[global]

# Specify the strategy to be used by the relayer. Default: 'packets'
# Two options are currently supported:
#   - 'all': Relay packets and perform channel and connection handshakes.
#   - 'packets': Relay packets only.
strategy = 'packets'

# Enable or disable the filtering mechanism. Default: 'false'
# Valid options are 'true', 'false'.
# Currently Hermes supports two filters:
# 1. Packet filtering on a per-chain basis; see the chain-specific
#   filter specification below in [chains.packet_filter].
# 2. Filter for all activities based on client state trust threshold; this filter
#   is parametrized with (numerator = 1, denominator = 3), so that clients with
#   thresholds different than this will be ignored.
# If set to 'true', both of the above filters will be enabled.
filter = false

# Specify the verbosity for the relayer logging output. Default: 'info'
# Valid options are 'error', 'warn', 'info', 'debug', 'trace'.
log_level = 'info'

# Parametrize the periodic packet clearing feature.
# Interval (in number of blocks) at which pending packets
# should be eagerly cleared. A value of '0' will disable
# periodic packet clearing. Default: 100
clear_packets_interval = 100

# The telemetry section defines parameters for Hermes' built-in telemetry capabilities.
# https://hermes.informal.systems/telemetry.html
[telemetry]

# Whether or not to enable the telemetry service. Default: false
enabled = true

# Specify the IPv4/6 host over which the built-in HTTP server will serve the metrics
# gathered by the telemetry service. Default: 127.0.0.1
host = '127.0.0.1'

# Specify the port over which the built-in HTTP server will serve the metrics gathered
# by the telemetry service. Default: 3001
port = 3001

# A chains section includes parameters related to a chain and the full node to which
# the relayer can send transactions and queries.
[[chains]]

# Specify the chain ID. Required
id = 'ibc-0'

# Specify the RPC address and port where the chain RPC server listens on. Required
rpc_addr = 'http://127.0.0.1:26657'

# Specify the GRPC address and port where the chain GRPC server listens on. Required
grpc_addr = 'http://127.0.0.1:9090'

# Specify the WebSocket address and port where the chain WebSocket server
# listens on. Required
websocket_addr = 'ws://127.0.0.1:26657/websocket'

# Specify the maximum amount of time (duration) that the RPC requests should
# take before timing out. Default: 10s (10 seconds)
rpc_timeout = '10s'

# Specify the prefix used by the chain. Required
account_prefix = 'cosmos'

# Specify the name of the private key to use for signing transactions. Required
# See the Adding Keys chapter for more information about managing signing keys:
#   https://hermes.informal.systems/commands/keys/index.html#adding-keys
key_name = 'testkey'

# Specify the store prefix used by the on-chain IBC modules. Required
# Recommended value for Cosmos SDK: 'ibc'
store_prefix = 'ibc'

# Specify the maximum amount of gas to be used as the gas limit for a transaction.
# Default: 300000
max_gas = 3000000

# Specify the price per gas used of the fee to submit a transaction and
# the denomination of the fee. Required
gas_price = { price = 0.001, denom = 'stake' }

# Specify by ratio to increase the gas estimate used to compute the fee,
# to account for potential estimation error. Default: 0.1, ie. 10%.
gas_adjustment = 0.1

# Specify how many IBC messages at most to include in a single transaction.
# Default: 30
max_msg_num = 30

# Specify the maximum size, in bytes, of each transaction that Hermes will submit.
# Default: 2097152 (2 MiB)
max_tx_size = 2097152

# Specify the maximum amount of time to tolerate a clock drift.
# The clock drift parameter defines how much new (untrusted) header's time
# can drift into the future. Default: 5s
clock_drift = '5s'

# Specify the amount of time to be used as the light client trusting period.
# It should be significantly less than the unbonding period
# (e.g. unbonding period = 3 weeks, trusting period = 2 weeks).
# Default: 14days (336 hours)
trusting_period = '14days'

# Specify the trust threshold for the light client, ie. the maximum fraction of validators
# which have changed between two blocks.
# Default: { numerator = '1', denominator = '3' }, ie. 1/3.
# Warning: This is an advanced feature! Modify with caution.
trust_threshold = { numerator = '1', denominator = '3' }

# This section specifies the filters for policy based relaying.
# Default: no policy/ filters
# The section is ignored if the global 'filter' option is set to 'false'.
# If the global 'filter' option is set to 'true' and this section is missing then no filtering is performed for this chain.
# Only packet filtering based on channel identifier can be specified.
# A channel filter has two fields:
# 1. `policy` - one of two types are supported:
#       - 'allow': permit relaying _only on_ the port/channel id in the list below,
#       - 'deny': permit relaying on any channel _except for_ the list below.
# 2. `list` - the list of channels specified by the port and channel identifiers.
#
# Example configuration of a channel filter, denying packet relaying on channel with port ID 'transfer' and channel ID 'channel-0':
#
# [chains.packet_filter]
# policy = 'deny'
# list = [
#   ['transfer', 'channel-0'],
# ]


[[chains]]
id = 'ibc-1'
rpc_addr = 'http://127.0.0.1:26557'
grpc_addr = 'http://127.0.0.1:9091'
websocket_addr = 'ws://127.0.0.1:26557/websocket'
rpc_timeout = '10s'
account_prefix = 'cosmos'
key_name = 'testkey'
store_prefix = 'ibc'
max_gas = 3000000
gas_price = { price = 0.001, denom = 'stake' }
gas_adjustment = 0.1
max_msg_num = 30
max_tx_size = 2097152
clock_drift = '5s'
trusting_period = '14days'
trust_threshold = { numerator = '1', denominator = '3' }