Add support for Roomba i3

[bungee71]

• Roomba Model: i3
• Roomba Software Version: 1.2.9

Hi,

do you plan to support the roomba i3 if yes when do you think it's done ?

br bungee

[mcm1957]

Please check with newest version of adapter (1.2.1).
If issue still occure, please report your configuration (Adapter version, js-controller version, node, npm, OS).

If no response received within 30 days this issue might be closed.

[bungee71]

• Installation was ok.
• Connection with Roomba worked
• States do not connect in IObroker objects
• The call of the roomba webpage from the iobroker instance use the IP of roomba instead of IObroker. Page try to load the states without success (states are not connected in iobroker objects)
• which Objects must be available in IObroker Objects ? Info/connection; States/_connected or more ?

[mcm1957]

@TheRealArthurDent
As you know the adapter a little bit better than I can you eventually answer the question?

In general - is support for specific models a matter of this adapter or must be implemented at dorita980?

[TheRealArthurDent]

The adapter doesn't have a lot of device specific logic (if any). So pretty sure when it comes to supporting new models (or rather firmware versions), that goes down to the dorita980 lib.

Anyway, @bungee71 are you sure 1.2.9 is in fact the firmware version of your robot?
If so, try updating to a newer version. Preferably 2.4.16-126 and you should be good. (see https://github.com/koalazak/dorita980#features, https://github.com/iobroker-community-adapters/ioBroker.roomba#supported-firmware-versions)