config.yml

local_v4:
    interface: wlan1
    address: 192.168.1.123 # '*' can be used to listen on all addresses
    gateway_mac: '48:xx:xx:f7:xx:29'
    port: 6704
local_v6:  
    interface: wlan1
    address: 'fe80::8aa3:426c:fcb0:2612:a56f:507d' # '*' can be used to listen on all addresses
    gateway_mac: '48:xx:xx:f7:xx:29'
    port: 6704

# IP addresses below can be v4 or v6.
# listeners and receivers of different types can be mixed and matched.
# The system will handle things automatically
# Receivers can be either UDP or TCP, but spoofing will only work with UDP.  The option is ignored for TCP.

sources:
    - name: brk01
      source_ip: 0.0.0.0 # 0.0.0.0 can be used to accept from any/all IPv4 sources, or ::/0 can be used to accept from any/all IPv6 sources, and default_catchall_only can be used to only apply this to packets that have not already matched a different source config.
      default_catchall_only: True
      receivers:
        - intake01

    - name: dhammer
      source_ip: 192.168.231.128
      sticky_bytes_start: 13 # sticky_bytes_* options allow you to specify a chunk of bytes from a UDP *payload* to hash for stickiness.  For example, the bytes that hold the transaction ID of a DHCP request. (0-indexed)
      sticky_bytes_length: 4
      receivers:
        - k01
        - k02

receivers:
    - name: intake01
      spoof: True
      proto: udp
      ip: 192.168.145.154
      port: 3307

    - name: k01
      spoof: False
      proto: udp
      ipv_pref: 4 # When passing a hostname instead of an IP, ipv_pref can be used to prefer one IP version.  If the preferred version is not found, the available one will be selected.
      ip: some.example.com # NOTE: "ip" will changed to "host" in a later update.
      port: 6700
      
    - name: k02
      spoof: True
      preserve_udp_port: True # preserve_udp_port can be used to send the outgoing packets with the same source port as the incoming packet that's being replicated.
      proto: udp
      ip: 192.168.189.75
      port: 6700