Below are instructions on how to initially flash your device to run RattlesnakeOS. This is a one time process and future updates will happen through the built in OTA updater. Please note most of this guide is directly copied from CopperheadOS documentation.
You should have at least 4GB of memory on your OS to avoid problems.
You can obtain the adb and fastboot tools from the Android SDK. Either install Android Studio or use the standalone SDK. Do not use distribution packages for adb and fastboot. Distribution packages are out-of-date and not compatible with the latest version of Android. An obsolete fastboot will result in corrupted installations and potentially bricked devices. Do not make the common mistake of assuming that everything will be fine and ignoring these instructions. Double check that the first fastboot in your PATH is indeed from an up-to-date SDK installation:
which fastboot
To set up a minimal SDK installation without Android Studio on Linux:
mkdir ~/sdk
cd ~/sdk
wget https://dl.google.com/android/repository/sdk-tools-linux-3859397.zip
unzip sdk-tools-linux-3859397.zip
Run an initial update, which will also install platform-tools and patcher;v4:
tools/bin/sdkmanager --update
To make your life easier, add the directories to your PATH in your shell profile configuration:
export PATH="$HOME/sdk/tools:$HOME/sdk/tools/bin:$HOME/sdk/platform-tools:$HOME/sdk/build-tools/25.0.3:$PATH"
export ANDROID_HOME="$HOME/sdk"
You should update the sdk before use from this point onwards:
sdkmanager --update
OEM unlocking needs to be enabled from within the operating system.
Enable the developer settings menu by going to Settings -> About device and pressing on the build number menu entry until developer mode is enabled.
Next, go to Settings -> Developer settings and toggle on the Enable OEM unlocking setting.
It’s important to have the latest bootloader firmware before installing RattlesnakeOS.
If you’re only behind one release, updating within the stock OS makes sense to get an incremental update. If you’re behind multiple releases, updating within the OS will usually require installing multiple updates to catch up to the current state of things. The quickest way to deal with that if you have plenty of bandwidth is sideloading the latest full over-the-air update from Google.
The initial install should be performed by flashing the factory images. This will replace the existing OS installation and wipe all the existing data. First, boot into the bootloader interface. You can do this by turning off the device and then turning it on by holding both the Volume Down and Power buttons. Alternatively, you can use adb reboot bootloader from Android.
The bootloader now needs to be unlocked to allow flashing new images:
fastboot flashing unlock
On the Pixel 2 XL (not the Pixel 2 or other devices), it’s currently necessary to unlock the critical partitions, but a future update will make the bootloader consistent with other devices:
fastboot flashing unlock_critical
The command needs to be confirmed on the device.
Next, extract the factory images and run the script to flash them.
tar xvf taimen-factory-latest.tar.xz
cd taimen-opm1.171019.018
mkdir tmp
TMPDIR=$PWD/tmp ./flash-all.sh
On the Pixel 2 and Pixel 2 XL, the public key needs to be set for Android Verified Boot 2.0 before locking the bootloader again:
fastboot flash avb_custom_key taimen-avb_pkmd.bin
To confirm that the key is set, verify that avb_user_settable_key_set is yes:
fastboot getvar avb_user_settable_key_set
Locking the bootloader is important as it enables full verified boot. It also prevents using fastboot to flash, format or erase partitions. Verified boot will detect modifications to any of the OS partitions (boot, recovery, system, vendor) and it will prevent reading any modified / corrupted data. If changes are detected, error correction data is used to attempt to obtain the original data at which point it’s verified again which makes verified boot robust to non-malicious corruption.
On the Pixel 2 XL (not the Pixel 2 or other devices), lock the critical partitions again if this was unlocked:
fastboot flashing lock_critical
Reboot into the bootloader menu and set it to locked:
fastboot flashing lock
The command needs to be confirmed on the device since it needs to perform a factory reset.
Unlocking the bootloader again will perform a factory reset.
OEM unlocking needs to be disabled now from within the operating system.
Enable the developer settings menu by going to Settings -> About device and pressing on the build number menu entry until developer mode is enabled.
Next, go to Settings -> Developer settings and toggle off the Enable OEM unlocking setting.