- Abstract for class and method, Abstract class can't initaited.
- Abstract class can have final method but final class can't have abstract method
Any equals implementation should satisfy these properties:
- Reflexive. For any reference value x, x.equals(x) returns true.
- Symmetric. For any reference values x and y, x.equals(y) should return true if and only if y.equals(x) returns true.
- Transitive. For any reference values x, y, and z, if x.equals(y) returns true and y.equals(z) returns true, then x.equals(z) must return true.
- Consistent. For any reference values x and y, multiple invocations of x.equals(y) consistently return true or consistently return false, if no information used in equals is modified.
- For any non-null reference value x, x.equals(null) should return false. Java
Our earlier implementation of equals method will not satisfy condition 5. It would throw an exception if an object of different class (other than Client) is used for comparison. Let's now provide an implementation of equals which satisfy these properties:
//Client class
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (getClass() != obj.getClass())
return false;
Client other = (Client) obj;
if (id != other.id)
return false;
return true;
}A good hashCode method should have the following properties • If obj1.equals(obj2) is true, then obj1.hashCode() should be equal to obj2.hashCode() • obj.hashCode() should return the same value when run multiple times, if values of obj used in equals() have not changed. • If obj1.equals(obj2) is false, it is NOT required that obj1.hashCode() is not equal to obj2.hashCode(). Two unequal objects MIGHT have the same hashCode. A sample hashcode implementation of Client class which meets above constraints is given below:
//Client class
@Override
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result + id;
return result;
}Will this code compile?
class Animal {
String name;
public Animal() {
this.name = "Default Name";
}
// This is called a one argument constructor.
public Animal(String name) {
this.name = name;
}
public static void main(String[] args) {
Animal animal = new Animal();
}
}Answer is no. Since we provided a constructor, compiler does not provide a default constructor
Coupling is a measure of how much a class is dependent on other classes. There should minimal dependencies between classes. So, we should always aim for low coupling between classes.
Cohesion is a measure of how related the responsibilities of a class are. A class must be highly cohesive i.e. its responsibilities (methods) should be highly related to one another
Consider the example below. When the try block ends the resources are automatically released. We do not need to create a separate finally block.
try (BufferedReader br = new BufferedReader(new FileReader("FILE_PATH")))
{
String line;
while ((line = br.readLine()) != null) {
System.out.println(line);
}
} catch (IOException e) {
e.printStackTrace();
}How does try with resources work? try-with-resources is available to any class that implements the AutoCloseable interface. In the above example BufferedReader implements AutoCloseable interface.
public interface AutoCloseable {
void close() throws Exception;
}Post Java 5, collections using new approaches to synchronization are available in Java. These are called concurrent collections. Examples of new approaches are : • Copy on Write • Compare and Swap • Locks
Important points about Copy on Write approach • All values in collection are stored in an internal immutable (not-changeable) array. A new array is created if there is any modification to the collection. • Read operations are not synchronized. Only write operations are synchronized. Copy on Write approach is used in scenarios where reads greatly out number write’s on a collection. CopyOnWriteArrayList & CopyOnWriteArraySet are implementations of this approach. Copy on Write collections are typically used in Subject – Observer scenarios, where the observers very rarely change. Most frequent operations would be iterating around the observers and notifying them.
Compare and Swap is one of the new approaches (Java 5) introduced in java to handle synchronization. In traditional approach, a method which modifies a member variable used by multiple threads is completely synchronized – to prevent other threads accessing stale value. In compare and swap approach, instead of synchronizing entire method, the value of the member variable before calculation is cached. After the calculation, the cached value is compared with the Java Interview Questions and Answers – www.in28Minutes.com 89 current value of member variable. If the value is not modified, the calculated result is stored into the member variable. If another thread has modified the value, then the calculation can be performed again. Or skipped – as the need might be. ConcurrentLinkedQueue uses this approach.
CopyOnWriteArrayList : final ReentrantLock lock = this.lock; When 10 methods are declared as synchronized, only one of them is executed by any of the threads at any point in time. This has severe performance impact. Another new approach introduced in Java 5 is to use lock and unlock methods. Lock and unlock methods are used to divide methods into different blocks and help enhance concurrency. The 10 methods can be divided into different blocks, which can be synchronized based on different variables.
Fail Fast Iterators throw a ConcurrentModificationException if there is a modification to the underlying collection is modified. This was the default behavior of the synchronized collections of pre Java 5 age.
import java.util.HashMap;
import java.util.Iterator;
import java.util.Map;
public class FailFast {
public static void main(String[] args) {
Map<String, String> map = new HashMap<String, String>();
map.put("key1", "value1");
map.put("key2", "value2");
map.put("key3", "value3");
Iterator<String> iterator = map.keySet().iterator();
while (iterator.hasNext()) {
System.out.println(map.get(iterator.next()));
map.put("key4", "value4");
}
}
}Fail Safe Iterators do not throw exceptions even when there are changes in the collection. This is the default behavior of the concurrent collections, introduced since Java 5. Fail Safe Iterator makes copy of the internal data structure (object array) and iterates over the copied data structure. Fail Safe is efficient when traversal operations vastly outnumber mutations
package com.in28minutes.java.collections;
import java.util.Iterator;
import java.util.concurrent.ConcurrentHashMap;
public class FailSafe {
public static void main(String[] args) {
ConcurrentHashMap<String, String> map = new ConcurrentHashMap<String, String>();
map.put("key1", "value1");
map.put("key2", "value2");
map.put("key3", "value3");
Java Interview Questions and Answers – www.in28Minutes.com 91
Iterator<String> iterator = map.keySet().iterator();
while (iterator.hasNext()) {
System.out.println(map.get(iterator.next()));
map.put("key4", "value4");
}
}
}Atomic Access Java Tutorial states “In programming, an atomic action is one that effectively happens all at once. An atomic action cannot stop in the middle: it either happens completely, or it doesn't happen at all. No side effects of an atomic action are visible until the action is complete”. Let’s assume we are writing a multi threaded program. Let’s create an int variable i. Even a small operation, like i++ (increment), is not thread safe. i++ operation involves three steps.
- Read the value which is currently stored in i
- Add one to it (atomic operation).
- Store it in i In a multi-threaded environment, there can be unexpected results. For example, if thread1 is reading the value (step 1) and immediately after thread2 stores the value (step 3). To prevent these, Java provides atomic operations. Atomic operations are performed as a single unit without interference from other threads ensuring data consistency. A good example is AtomicInteger. To increment a value of AtomicInteger, we use the incrementAndGet() method. Java ensures this operation is Atomic.
The java.util.concurrent.ExecutorService interface is a new way of executing tasks asynchronously in the background. An ExecutorService is very similar to a thread pool. Can you give an example for ExecutorService? Below example shows how to create an Executor Service and use it to run a task implementing the Runnable interface.
ExecutorService executorService = Executors.newSingleThreadExecutor();
executorService.execute(new Runnable() {
public void run() {
System.out .println("From ExecutorService");
}
});
System.out .println("End of Main");
executorService.shutdown();There are three ways of creating executor services. Below example shows the three different ways.
executorService1 can execute one task at a time. executorService2 can execute 10 tasks at a time.
executorService3 can execute tasks after certain delay or periodically.
// Creates an Executor that uses a single worker thread operating off an
// unbounded queue.
ExecutorService executorService1 = Executors.newSingleThreadExecutor();
// Creates a thread pool that reuses a fixed number of threads
// operating off a shared unbounded queue. At any point, the parameter
// specifies the most threads that will be active processing tasks.
ExecutorService executorService2 = Executors.newFixedThreadPool(10);
// Creates a thread pool that can schedule commands to run after a
// given delay, or to execute periodically.
ExecutorService executorService3 = Executors.newScheduledThreadPool(10);We can use a Future to check the return value. Below example shows how it can be done. Future get method would return null if the task finished successfully. Future future = executorService1.submit(new Runnable() { public void run() { System.out .println("From executorService1"); } }); future.get(); // returns null if the task has finished correctly.
Runnable interface's run method has a return type void. So, it cannot return any result from executing a task. However, a Callable interface's call method has a return type. If you have multiple return values possible from a task, we can use the Callable interface. Example shows how to create a Callable interface and execute it using an executor service. The return value is printed to the output.
Future futureFromCallable = executorService1.submit(new Callable() {
public String call() throws Exception {
return "RESULT";
}
});
System.out .println("futureFromCallable.get() = "
+ futureFromCallable.get());Look at the example code below: thread3.start(); thread2.start(); thread3.join();//wait for thread 3 to complete System.out.println("Thread3 is completed."); thread4.start(); thread3.join() method call force the execution of main method to stop until thread3 completes execution. After that, thread4.start() method is invoked, putting thread4 into a Runnable State.
Join method also has an overloaded method accepting time in milliseconds as a parameter. thread4.join(2000); In above example, main method thread would wait for 2000 ms or the end of execution of thread4, whichever is minimum.
Yield is a static method in the Thread class. It is like a thread saying " I have enough time in the limelight. Can some other thread run next?". 102 Java Interview Questions and Answers – www.in28Minutes.com A call to yield method changes the state of thread from RUNNING to RUNNABLE. However, the scheduler might pick up the same thread to run again, especially if it is the thread with highest priority. Summary is yield method is a request from a thread to go to Runnable state. However, the scheduler can immediately put the thread back to RUNNING state.
sleep is a static method in Thread class. sleep method can throw a InterruptedException. sleep method causes the thread in execution to go to sleep for specified number of milliseconds.
| Type | Pattern Name | Example |
|---|---|---|
| Creational Design Pattern | Singleton Pattern | SingletonEagar,SingletonSynchronized |
| Creational Design Pattern | Factory Pattern | java class VehicleFactory { public static Vehicle getInstance(String type, int wheel) { if(type == "car") { return new Car(wheel); } else if(type == "bike") { return new Bike(wheel); } |
| Creational Design Pattern | Prototype Pattern | java Vehicle b = (Vehicle) a.clone(); |
| Creational Design Pattern | Builder Pattern | java Vehicle car = new Vehicle.VehicleBuilder("1500cc", 4).setAirbags(4).build(); Vehicle bike = new Vehicle.VehicleBuilder("250cc", 2).build(); |
| -------------------------- | ----------------- | ----------------- |
| Structural Design Pattern | Adapter Pattern | java ChromeDriver a = new ChromeDriver(); a.getElement(); a.selectElement(); IEDriver e = new IEDriver(); e.findElement(); e.clickElement(); WebDriver wID = new WebDriverAdapter(e); wID.getElement(); wID.selectElement(); |
| Structural Design Pattern | Bridge Pattern | Row 2 Column 2 |
| Structural Design Pattern | Composite Pattern | java CompositeAccount component = new CompositeAccount(); component.addAccount(new DepositeAccount("DA001", 100)); component.addAccount(new DepositeAccount("DA002", 150)); component.addAccount(new SavingAccount("SA001", 200)); |
| Structural Design Pattern | Facade Pattern | java WebExplorerHelperFacade.generateReports("firefox", "html", test); WebExplorerHelperFacade.generateReports("firefox", "junit", test); |
| Structural Design Pattern | Proxy Pattern | java DatabaseExecuter nonAdminExecuter = new DatabaseExecuterProxy("NonAdmin", "Admin@123"); |
| -------------------------- | ----------------- | ----------------- |
| Behavioral Design Pattern | Observer Pattern | java TV sonyOldRemote = new Sony(new OldRemote()); TV sonyNewRemote = new Sony(new NewRemote()); |
sonar-example
What is sonar how to get start with it | Example
Plugins:
org.sonarsource.scanner.maven sonar-maven-plugin 3.4.0.905 org.jacoco jacoco-maven-plugin 0.8.1
jacoco cmd:
clean org.jacoco:jacoco-maven-plugin:prepare-agent install
sonar cmd:
mvn sonar:sonar
-
Install the SonarQube plugin for Eclipse.
-
Configure your SonarQube server.
-
Link your workspace project to the copy on SonarQube.
-
Add the SonarQube views to your current perspective.
@Test public void test() { boolean condn = true; assertEquals(true, condn); assertTrue(condn); // assertFalse(condn); } package com.in28minutes.business;
import static org.junit.Assert.assertEquals;
import static org.mockito.Mockito.mock;
import static org.mockito.Mockito.when;
import java.util.Arrays;
import java.util.List;
import org.junit.Test;
import com.in28minutes.data.api.TodoService;
public class TodoBusinessImplMockitoTest {
@Test
public void usingMockito() {
TodoService todoService = mock(TodoService.class);
List<String> allTodos = Arrays.asList("Learn Spring MVC",
"Learn Spring", "Learn to Dance");
when(todoService.retrieveTodos("Ranga")).thenReturn(allTodos);
TodoBusinessImpl todoBusinessImpl = new TodoBusinessImpl(todoService);
List<String> todos = todoBusinessImpl
.retrieveTodosRelatedToSpring("Ranga");
assertEquals(2, todos.size());
}
}@RunWith(SpringRunner.class)/@RunWith(SpringJUnit4ClassRunner.class)
public class SpringIn5StepsBasicApplicationTests
{ @Test public void contextLoads() { } }
@RunWith(SpringRunner.class) @ContextConfiguration(classes = SpringIn5StepsBasicApplication.class)
public class BinarySearchTest { // Get this bean from the context @Autowired BinarySearchImpl binarySearch;import static org.junit.Assert.assertEquals;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.mockito.InjectMocks;
import org.mockito.Mock;
import org.mockito.Mockito;
import org.mockito.junit.MockitoJUnitRunner;
@RunWith(MockitoJUnitRunner.class)
public class SomeCdiBusinessTest {
// Inject Mock
@InjectMocks
SomeCdiBusiness business;
// Create Mock
@Mock
SomeCdiDao daoMock;
@Test
public void testBasicScenario() {
Mockito.when(daoMock.getData()).thenReturn(new int[] { 2, 4 });
assertEquals(4, business.findGreatest());
}
@Test
public void testBasicScenario_NoElements() {
Mockito.when(daoMock.getData()).thenReturn(new int[] { });
assertEquals(Integer.MIN_VALUE, business.findGreatest());
}
@Test
public void testBasicScenario_EqualElements() {
Mockito.when(daoMock.getData()).thenReturn(new int[] { 2,2});
assertEquals(2, business.findGreatest());
}
}package com.in28minutes.mockito.mockitodemo;
import static org.junit.Assert.assertEquals;
import static org.mockito.Mockito.when;
import org.junit.Test;
import org.junit.runner.RunWith;
import org.mockito.InjectMocks;
import org.mockito.Mock;
import org.mockito.junit.MockitoJUnitRunner;
@RunWith(MockitoJUnitRunner.class)
public class SomeBusinessMockAnnotationsTest {
@Mock
DataService dataServiceMock;
@InjectMocks
SomeBusinessImpl businessImpl;
@Test
public void testFindTheGreatestFromAllData() {
when(dataServiceMock.retrieveAllData()).thenReturn(new int[] { 24, 15, 3 });
assertEquals(24, businessImpl.findTheGreatestFromAllData());
}
@Test
public void testFindTheGreatestFromAllData_ForOneValue() {
when(dataServiceMock.retrieveAllData()).thenReturn(new int[] { 15 });
assertEquals(15, businessImpl.findTheGreatestFromAllData());
}
@Test
public void testFindTheGreatestFromAllData_NoValues() {
when(dataServiceMock.retrieveAllData()).thenReturn(new int[] {});
assertEquals(Integer.MIN_VALUE, businessImpl.findTheGreatestFromAllData());
}
}
