-
Notifications
You must be signed in to change notification settings - Fork 28
/
satamv.c
197 lines (171 loc) · 6.14 KB
/
satamv.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2010,2011 Carl-Daniel Hailfinger
* Written by Carl-Daniel Hailfinger for Angelbird Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Datasheets are not public (yet?) */
#if defined(__i386__) || defined(__x86_64__)
#include <stdlib.h>
#include "flash.h"
#include "programmer.h"
#include "hwaccess.h"
uint8_t *mv_bar;
uint16_t mv_iobar;
const struct dev_entry satas_mv[] = {
/* 88SX6041 and 88SX6042 are the same according to the datasheet. */
{0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"},
{0},
};
#define NVRAM_PARAM 0x1045c
#define FLASH_PARAM 0x1046c
#define EXPANSION_ROM_BAR_CONTROL 0x00d2c
#define PCI_BAR2_CONTROL 0x00c08
#define GPIO_PORT_CONTROL 0x104f0
static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val,
chipaddr addr);
static uint8_t satamv_chip_readb(const struct flashctx *flash,
const chipaddr addr);
static const struct par_master par_master_satamv = {
.chip_readb = satamv_chip_readb,
.chip_readw = fallback_chip_readw,
.chip_readl = fallback_chip_readl,
.chip_readn = fallback_chip_readn,
.chip_writeb = satamv_chip_writeb,
.chip_writew = fallback_chip_writew,
.chip_writel = fallback_chip_writel,
.chip_writen = fallback_chip_writen,
};
/*
* Random notes:
* FCE# Flash Chip Enable
* FWE# Flash Write Enable
* FOE# Flash Output Enable
* FALE[1:0] Flash Address Latch Enable
* FAD[7:0] Flash Multiplexed Address/Data Bus
* FA[2:0] Flash Address Low
*
* GPIO[15,2] GPIO Port Mode
* GPIO[4:3] Flash Size
*
* 0xd2c Expansion ROM BAR Control
* 0xc08 PCI BAR2 (Flash/NVRAM) Control
* 0x1046c Flash Parameters
*/
int satamv_init(void)
{
struct pci_dev *dev = NULL;
uintptr_t addr;
uint32_t tmp;
if (rget_io_perms())
return 1;
/* BAR0 has all internal registers memory mapped. */
dev = pcidev_init(satas_mv, PCI_BASE_ADDRESS_0);
if (!dev)
return 1;
addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0);
if (!addr)
return 1;
mv_bar = rphysmap("Marvell 88SX7042 registers", addr, 0x20000);
if (mv_bar == ERROR_PTR)
return 1;
tmp = pci_mmio_readl(mv_bar + FLASH_PARAM);
msg_pspew("Flash Parameters:\n");
msg_pspew("TurnOff=0x%01x\n", (tmp >> 0) & 0x7);
msg_pspew("Acc2First=0x%01x\n", (tmp >> 3) & 0xf);
msg_pspew("Acc2Next=0x%01x\n", (tmp >> 7) & 0xf);
msg_pspew("ALE2Wr=0x%01x\n", (tmp >> 11) & 0x7);
msg_pspew("WrLow=0x%01x\n", (tmp >> 14) & 0x7);
msg_pspew("WrHigh=0x%01x\n", (tmp >> 17) & 0x7);
msg_pspew("Reserved[21:20]=0x%01x\n", (tmp >> 20) & 0x3);
msg_pspew("TurnOffExt=0x%01x\n", (tmp >> 22) & 0x1);
msg_pspew("Acc2FirstExt=0x%01x\n", (tmp >> 23) & 0x1);
msg_pspew("Acc2NextExt=0x%01x\n", (tmp >> 24) & 0x1);
msg_pspew("ALE2WrExt=0x%01x\n", (tmp >> 25) & 0x1);
msg_pspew("WrLowExt=0x%01x\n", (tmp >> 26) & 0x1);
msg_pspew("WrHighExt=0x%01x\n", (tmp >> 27) & 0x1);
msg_pspew("Reserved[31:28]=0x%01x\n", (tmp >> 28) & 0xf);
tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_BAR_CONTROL);
msg_pspew("Expansion ROM BAR Control:\n");
msg_pspew("ExpROMSz=0x%01x\n", (tmp >> 19) & 0x7);
/* Enable BAR2 mapping to flash */
tmp = pci_mmio_readl(mv_bar + PCI_BAR2_CONTROL);
msg_pspew("PCI BAR2 (Flash/NVRAM) Control:\n");
msg_pspew("Bar2En=0x%01x\n", (tmp >> 0) & 0x1);
msg_pspew("BAR2TransAttr=0x%01x\n", (tmp >> 1) & 0x1f);
msg_pspew("BAR2Sz=0x%01x\n", (tmp >> 19) & 0x7);
tmp &= 0xffffffc0;
tmp |= 0x0000001f;
pci_rmmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL);
/* Enable flash: GPIO Port Control Register 0x104f0 */
tmp = pci_mmio_readl(mv_bar + GPIO_PORT_CONTROL);
msg_pspew("GPIOPortMode=0x%01x\n", (tmp >> 0) & 0x3);
if (((tmp >> 0) & 0x3) != 0x2)
msg_pinfo("Warning! Either the straps are incorrect or you "
"have no flash or someone overwrote the strap "
"values!\n");
tmp &= 0xfffffffc;
tmp |= 0x2;
pci_rmmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL);
/* Get I/O BAR location. */
addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_2);
if (!addr)
return 1;
/* Truncate to reachable range.
* FIXME: Check if the I/O BAR is actually reachable.
* This is an arch specific check.
*/
mv_iobar = addr & 0xffff;
msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar);
/* 512 kByte with two 8-bit latches, and
* 4 MByte with additional 3-bit latch. */
max_rom_decode.parallel = 4 * 1024 * 1024;
register_par_master(&par_master_satamv, BUS_PARALLEL);
return 0;
}
/* BAR2 (MEM) can map NVRAM and flash. We set it to flash in the init function.
* If BAR2 is disabled, it still can be accessed indirectly via BAR1 (I/O).
* This code only supports indirect accesses for now.
*/
/* Indirect access to via the I/O BAR1. */
static void satamv_indirect_chip_writeb(uint8_t val, chipaddr addr)
{
/* 0x80000000 selects BAR2 for remapping. */
OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar);
OUTB(val, mv_iobar + 0x80 + (addr & 0x3));
}
/* Indirect access to via the I/O BAR1. */
static uint8_t satamv_indirect_chip_readb(const chipaddr addr)
{
/* 0x80000000 selects BAR2 for remapping. */
OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar);
return INB(mv_iobar + 0x80 + (addr & 0x3));
}
/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */
static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val,
chipaddr addr)
{
satamv_indirect_chip_writeb(val, addr);
}
/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */
static uint8_t satamv_chip_readb(const struct flashctx *flash,
const chipaddr addr)
{
return satamv_indirect_chip_readb(addr);
}
#else
#error PCI port I/O access is not supported on this architecture yet.
#endif