You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
When integrating the top_left_microswitch.stl with drive_bmg.stl, there is not enough clearance to install the cable anchor due to the NEMA17 motor's size. The only workaround is to remove the cable anchor. My fusion360 skills are currently awful, but if I manage to come up with a modded design, I'll include it here.
The text was updated successfully, but these errors were encountered:
Came up with an offset version that should fit with the BMG/NEMA17 configuration. It fits around the NEMA17 and I also added a boot heel (draft, or whatever it's technically called) so that the anchor doesn't spin around in place. The mount point for the anchor on the top_left_microswitch.stl is flush with the rest of the top surface, so there was nothing to prevent the original anchor design from spinning in place.
Suppose attaching the STL file would also be useful. Given the limits on filetypes that can be upload, anyone grabbing this will need to change the .txt extension to .stl.
When integrating the top_left_microswitch.stl with drive_bmg.stl, there is not enough clearance to install the cable anchor due to the NEMA17 motor's size. The only workaround is to remove the cable anchor. My fusion360 skills are currently awful, but if I manage to come up with a modded design, I'll include it here.
The text was updated successfully, but these errors were encountered: