Releases: just-containers/s6-overlay
v3.1.3.0
This release is now safe to use.
(A previous version of the artefacts had been built with a buggy toolchain, yielding huge binaries. The toolchains are now fixed and the published artefacts are normal-sized.)
This release just updates to the latest versions of the skarnet.org packages, that include a lot of bugfixes. The only thing users have to pay attention to is: if they're using the s6-test program in their scripts, they should change it to eltest. A warning message is printed with each invocation of s6-test. Apart from that, nothing is expected to change in an externally noticeable way.
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 46f7dddce75227f2e40ab94d66ceb9f19ee6b1b0 |
| skalibs | v2.13.0.0 |
| execline | v2.9.1.0 |
| s6 | v2.11.2.0 |
| s6-rc | v0.5.3.3 |
| s6-linux-init | v1.0.8.1 |
| s6-portable-utils | v2.2.5.1 |
| s6-linux-utils | v2.6.0.1 |
| s6-dns | v2.3.5.5 |
| s6-networking | v2.5.1.2 |
| s6-overlay-helpers | v0.1.0.1 |
v3.1.2.1
This release fixes a regression in 3.1.2.0 with interactive CMDs.
Note that S6_CMD_RECEIVE_SIGNALS should not be used with interactive CMDs, else the same problem will occur, i.e. the CMD will exit immediately and the container will stop right away.
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.12.0.1 |
| execline | v2.9.0.1 |
| s6 | v2.11.1.2 |
| s6-rc | v0.5.3.2 |
| s6-linux-init | v1.0.8.0 |
| s6-portable-utils | v2.2.5.0 |
| s6-linux-utils | v2.6.0.0 |
| s6-dns | v2.3.5.4 |
| s6-networking | v2.5.1.1 |
| s6-overlay-helpers | v0.1.0.0 |
v3.1.2.0
This release fixes a few bugs. It also adds the S6_SERVICES_READYTIME and S6_CMD_RECEIVE_SIGNALS variables.
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.12.0.1 |
| execline | v2.9.0.1 |
| s6 | v2.11.1.2 |
| s6-rc | v0.5.3.2 |
| s6-linux-init | v1.0.8.0 |
| s6-portable-utils | v2.2.5.0 |
| s6-linux-utils | v2.6.0.0 |
| s6-dns | v2.3.5.4 |
| s6-networking | v2.5.1.1 |
| s6-overlay-helpers | v0.1.0.0 |
v3.1.1.2
This release upgrades to the latest versions of execline and s6, which fix a couple bugs.
You don't need to upgrade if you haven't noticed anything wrong with the wait execline command.
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.12.0.1 |
| execline | v2.9.0.1 |
| s6 | v2.11.1.2 |
| s6-rc | v0.5.3.2 |
| s6-linux-init | v1.0.8.0 |
| s6-portable-utils | v2.2.5.0 |
| s6-linux-utils | v2.6.0.0 |
| s6-dns | v2.3.5.4 |
| s6-networking | v2.5.1.1 |
| s6-overlay-helpers | v0.1.0.0 |
v3.1.1.1
This release fixes a bug in 3.1.1.0 where a s6-ftrigrd process would busyloop at container start on older kernels.
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.12.0.1 |
| execline | v2.9.0.0 |
| s6 | v2.11.1.1 |
| s6-rc | v0.5.3.2 |
| s6-linux-init | v1.0.8.0 |
| s6-portable-utils | v2.2.5.0 |
| s6-linux-utils | v2.6.0.0 |
| s6-dns | v2.3.5.4 |
| s6-networking | v2.5.1.1 |
| s6-overlay-helpers | v0.1.0.0 |
v3.1.1.0
This release updates the overlay to the latest versions of the skarnet.org packages. They include a few bugfixes, but nothing critical. You should get it if you want to keep your binaries up-to-date, but don't do it at the expense of your workflow.
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.12.0.0 |
| execline | v2.9.0.0 |
| s6 | v2.11.1.1 |
| s6-rc | v0.5.3.2 |
| s6-linux-init | v1.0.8.0 |
| s6-portable-utils | v2.2.5.0 |
| s6-linux-utils | v2.6.0.0 |
| s6-dns | v2.3.5.4 |
| s6-networking | v2.5.1.1 |
| s6-overlay-helpers | v0.1.0.0 |
v3.1.0.1
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.11.2.0 |
| execline | v2.8.3.0 |
| s6 | v2.11.1.0 |
| s6-rc | v0.5.3.0 |
| s6-linux-init | v1.0.7.3 |
| s6-portable-utils | v2.2.4.0 |
| s6-linux-utils | v2.5.1.7 |
| s6-dns | v2.3.5.3 |
| s6-networking | v2.5.1.0 |
| s6-overlay-helpers | v0.1.0.0 |
v3.1.0.0
Binary releases include the following packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.11.2.0 |
| execline | v2.8.3.0 |
| s6 | v2.11.1.0 |
| s6-rc | v0.5.3.0 |
| s6-linux-init | v1.0.7.3 |
| s6-portable-utils | v2.2.4.0 |
| s6-linux-utils | v2.5.1.7 |
| s6-dns | v2.3.5.3 |
| s6-networking | v2.5.1.0 |
| s6-overlay-helpers | v0.0.1.0 |
v3.0.0.2-2
Binary releases include the following skaware packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.11.1.0 |
| execline | v2.8.2.0 |
| s6 | v2.11.0.1 |
| s6-rc | v0.5.3.0 |
| s6-linux-init | v1.0.7.1 |
| s6-portable-utils | v2.2.3.4 |
| s6-linux-utils | v2.5.1.7 |
| s6-dns | v2.3.5.3 |
| s6-networking | v2.5.1.0 |
| s6-overlay-helpers | v0.0.1.0 |
v3.0.0.2
3.0.0.1 had a parallel build bug. This version fixes it.
Binary releases include the following skaware packages:
| Software | Version |
|---|---|
| BearSSL | 79b1a9996c094ff593ae50bc4edc1f349f39dd6d |
| skalibs | v2.11.1.0 |
| execline | v2.8.2.0 |
| s6 | v2.11.0.1 |
| s6-rc | v0.5.3.0 |
| s6-linux-init | v1.0.7.1 |
| s6-portable-utils | v2.2.3.4 |
| s6-linux-utils | v2.5.1.7 |
| s6-dns | v2.3.5.3 |
| s6-networking | v2.5.1.0 |
| s6-overlay-helpers | v0.0.1.0 |