Climber7.ini

# generated by PrusaSlicer 2.3.0-beta1+linux-x64-GTK3 on 2020-11-28 at 15:26:16 UTC

[print:C7 0.15]
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 0
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*PRINTER_CLIMBER7.*/
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
draft_shield = 0
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = stars
first_layer_acceleration = 0
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 20
gcode_comments = 1
gcode_label_objects = 1
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 80
inherits = 
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.15
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = C7_[input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 60
perimeters = 3
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 6
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
small_perimeter_speed = 15
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 20
spiral_vase = 0
standby_temperature_delta = -15
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
thin_walls = 1
threads = 4
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 15
top_solid_layers = 3
top_solid_min_thickness = 0
travel_speed = 120
wipe_tower = 0
wipe_tower_bridging = 6
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 18
wipe_tower_x = 88.3188
wipe_tower_y = 133.609
xy_size_compensation = 0

[print:C7 0.20]
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 0
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*PRINTER_CLIMBER7.*/
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
draft_shield = 0
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = stars
first_layer_acceleration = 0
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 20
gcode_comments = 1
gcode_label_objects = 1
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 80
inherits = 
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = C7_[input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 60
perimeters = 3
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 6
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
small_perimeter_speed = 15
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 20
spiral_vase = 0
standby_temperature_delta = -15
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
thin_walls = 1
threads = 4
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 15
top_solid_layers = 3
top_solid_min_thickness = 0
travel_speed = 120
wipe_tower = 0
wipe_tower_bridging = 6
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 18
wipe_tower_x = 177.982
wipe_tower_y = 184.994
xy_size_compensation = 0

[filament:C7 PETG]
bed_temperature = 80
bridge_fan_speed = 100
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*PRINTER_CLIMBER7.*/
compatible_prints = 
compatible_prints_condition = 
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 640
filament_density = 1.27
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 8
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 3
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PETG
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Generic
filament_wipe = nil
first_layer_bed_temperature = 85
first_layer_temperature = 230
inherits = 
max_fan_speed = 75
min_fan_speed = 35
min_print_speed = 15
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K0 ; Filament gcode LA 1.5\n"
temperature = 220

[filament:C7 PLA]
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers = 
compatible_printers_condition = printer_notes=~/.*PRINTER_CLIMBER7.*/
compatible_prints = 
compatible_prints_condition = 
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 640
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 60
first_layer_temperature = 200
inherits = 
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "M900 K1.1 ; Filament gcode LA 1.5"
temperature = 200

[printer:Climber7]
bed_custom_model = /home/kano/3D Printers/Climber 7/bedShape.stl
bed_custom_texture = 
bed_shape = 0x0,205x0,205x220,0x220
before_layer_gcode = 
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile = 
deretract_speed = 0,0
end_gcode = G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nG28 X0 Y0\nT0\nM605 S1\nM84
extra_loading_move = -2
extruder_colour = #D8AE25;#5971C1
extruder_offset = 0x0,0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = 
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 300,300
machine_max_acceleration_retracting = 500,500
machine_max_acceleration_x = 500,500
machine_max_acceleration_y = 500,500
machine_max_acceleration_z = 100,100
machine_max_feedrate_e = 50,50
machine_max_feedrate_x = 300,200
machine_max_feedrate_y = 300,200
machine_max_feedrate_z = 10,10
machine_max_jerk_e = 5,5
machine_max_jerk_x = 15,15
machine_max_jerk_y = 15,15
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.3,0.3
max_print_height = 235
min_layer_height = 0.1,0.1
nozzle_diameter = 0.4,0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = 
printer_notes = PRINTER_CLIMBER7
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2,2
retract_before_wipe = 0%,0%
retract_layer_change = 0,0
retract_length = 0.5,0.5
retract_length_toolchange = 0,0
retract_lift = 0,0
retract_lift_above = 0,0
retract_lift_below = 0,0
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retract_speed = 40,40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M605 S0\nG21\nG90\nM82\nM107\nG28\n;G29 ; do we need autolevel on such small table?\n\nT0\nG0 F2880 X-51 \nT1\nG0 F2880 X257\n\nM104 S{first_layer_temperature[0] - 25} T0\nM104 S{first_layer_temperature[1] - 25} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0] - 25} T0 ; wait for extruder temp E0\nM109 S{first_layer_temperature[1] - 25} T1 ; wait for extruder temp E1\n\n\n
template_custom_gcode = 
thumbnails = 
toolchange_gcode = ; start toolchange\n\n{if layer_num > -1}G1 E-5 F2000 ; 5 mm extra retract{endif}\nM104 S{temperature[current_extruder] - 25} T[current_extruder] ; lower temperature for inactive extruder\n\n;move both extruders outside printing area\nT0\nG0 F2880 X-51\nT1\nG0 F2880 X257\n\nT[next_extruder] ; change to next extruder\n{if layer_num < 1}\nM104 S{first_layer_temperature[next_extruder]} T[next_extruder] ; set working temperature\nM109 S{first_layer_temperature[next_extruder]} T[next_extruder] ; and wait for it\n{else}\nM104 S{temperature[next_extruder]} T[next_extruder] ; set working temperature\nM109 S{temperature[next_extruder]} T[next_extruder] ; and wait for it\n{endif}\n\n\nG1 E10 F1000 ; 10 mm deretract\nG4 S4 ; wait 4 seconds before go outside purge bucket\n\n; slow moution outside purge bucket to drop ooze\n{if next_extruder == 0 }G0 F1000 X-5{endif}\n{if next_extruder == 1 }G0 F1000 X225{endif}\n
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0,0
z_offset = 0

[printer:Climber7 (duplication)]
bed_custom_model = /home/kano/3D Printers/Climber 7/bedShape.stl
bed_custom_texture = 
bed_shape = 0x0,100x0,100x220,0x220
before_layer_gcode = 
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile = 
deretract_speed = 0
end_gcode = G91\nG1 Z+0.5 E-16 Y+10 F9000\nM605 S1\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nG28 X0 Y0\nM84\n
extra_loading_move = -2
extruder_colour = #D8AE25
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = 
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 300,300
machine_max_acceleration_retracting = 500,500
machine_max_acceleration_x = 500,500
machine_max_acceleration_y = 500,500
machine_max_acceleration_z = 100,100
machine_max_feedrate_e = 50,50
machine_max_feedrate_x = 300,200
machine_max_feedrate_y = 300,200
machine_max_feedrate_z = 10,10
machine_max_jerk_e = 5,5
machine_max_jerk_x = 15,15
machine_max_jerk_y = 15,15
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.3
max_print_height = 235
min_layer_height = 0.1
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = 
printer_notes = PRINTER_CLIMBER7
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 0.5
retract_length_toolchange = 16
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M605 S0\n\nG21\nG90\n\nM82\nM107\nG28\nG29\n\n; because of bltouch \nG0 F2880 X-51 \n\n; set real duplication mode\nM605 S2 R0 X100\nM605 S2\nG28 X\n\nM104 S{first_layer_temperature[0]}\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} ; wait for extruder temp\n\nG92 E0\nG1 E16 F210\nG92 E0\n\n
template_custom_gcode = 
thumbnails = 
toolchange_gcode = ; start toolchange\nM104 S{temperature[current_extruder] - 25} T[current_extruder] ; lower temperature for inactive extruder\n{if current_extruder == 0 }G0 F2880 X-51 Y[wipe_tower_y]{else}G0 F2880 X257 Y[wipe_tower_y]{endif} ; move old extruder outside printing area\nT[next_extruder] ; change to next extruder\nG0 F2880 X[wipe_tower_x] Y[wipe_tower_y] ; move new extruder to wipe tower\nM104 S{temperature[next_extruder]} T[next_extruder] ; set working temperature\nM109 S{temperature[next_extruder]} T[next_extruder] ; and wait for it\n
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0

[printer:Climber7 (left)]
bed_custom_model = /home/kano/3D Printers/Climber 7/bedShape.stl
bed_custom_texture = 
bed_shape = 0x0,205x0,205x220,0x220
before_layer_gcode = 
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile = 
deretract_speed = 0
end_gcode = G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nG28 X0 Y0\nT0\nM605 S1\nM84
extra_loading_move = -2
extruder_colour = #D8AE25
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = 
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 300,300
machine_max_acceleration_retracting = 500,500
machine_max_acceleration_x = 500,500
machine_max_acceleration_y = 500,500
machine_max_acceleration_z = 100,100
machine_max_feedrate_e = 50,50
machine_max_feedrate_x = 300,200
machine_max_feedrate_y = 300,200
machine_max_feedrate_z = 10,10
machine_max_jerk_e = 5,5
machine_max_jerk_x = 15,15
machine_max_jerk_y = 15,15
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.3
max_print_height = 235
min_layer_height = 0.1
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = 
printer_notes = PRINTER_CLIMBER7
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 0.5
retract_length_toolchange = 16
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M605 S0\nG21\nG90\nM82\nM107\nG28\n;G29\n\nT0\nG0 F2880 X-51 \nT1\nG0 F2880 X257\n\n\nT0\nG0 F2880 X-51 \n\nM104 S{first_layer_temperature[0]} T0\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0 ; wait for extruder temp E0\n\nG92 E0\nG1 E16 F210\nG92 E0\n
template_custom_gcode = 
thumbnails = 
toolchange_gcode = ; start toolchange\nM104 S{temperature[current_extruder] - 25} T[current_extruder] ; lower temperature for inactive extruder\n{if current_extruder == 0 }G0 F2880 X-51 Y[wipe_tower_y]{else}G0 F2880 X257 Y[wipe_tower_y]{endif} ; move old extruder outside printing area\nT[next_extruder] ; change to next extruder\nG0 F2880 X[wipe_tower_x] Y[wipe_tower_y] ; move new extruder to wipe tower\nM104 S{temperature[next_extruder]} T[next_extruder] ; set working temperature\nM109 S{temperature[next_extruder]} T[next_extruder] ; and wait for it\n
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0

[printer:Climber7 (mirror)]
bed_custom_model = /home/kano/3D Printers/Climber 7/bedShape.stl
bed_custom_texture = 
bed_shape = 0x0,100x0,100x220,0x220
before_layer_gcode = 
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile = 
deretract_speed = 0
end_gcode = G91\nG1 Z+0.5 E-16 Y+10 F9000\nM605 S1\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nG28 X0 Y0\nM84\n
extra_loading_move = -2
extruder_colour = #D8AE25
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = 
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 300,300
machine_max_acceleration_retracting = 500,500
machine_max_acceleration_x = 500,500
machine_max_acceleration_y = 500,500
machine_max_acceleration_z = 100,100
machine_max_feedrate_e = 50,50
machine_max_feedrate_x = 300,200
machine_max_feedrate_y = 300,200
machine_max_feedrate_z = 10,10
machine_max_jerk_e = 5,5
machine_max_jerk_x = 15,15
machine_max_jerk_y = 15,15
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.3
max_print_height = 235
min_layer_height = 0.1
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = 
printer_notes = PRINTER_CLIMBER7
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 0.5
retract_length_toolchange = 16
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M605 S0\n\nG21\nG90\n\nM82\nM107\nG28\nG29\n\n; because of bltouch \nG0 F2880 X-51 \n\n; set real duplication mode\nM605 S2 R0 X220\n; TODO: check why 2 we have 2 similar operations\nM605 S3\nG28 X\n\nM104 S{first_layer_temperature[0]}\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} ; wait for extruder temp\n\nG92 E0\nG1 E16 F210\nG92 E0\n\n
template_custom_gcode = 
thumbnails = 
toolchange_gcode = ; start toolchange\nM104 S{temperature[current_extruder] - 25} T[current_extruder] ; lower temperature for inactive extruder\n{if current_extruder == 0 }G0 F2880 X-51 Y[wipe_tower_y]{else}G0 F2880 X257 Y[wipe_tower_y]{endif} ; move old extruder outside printing area\nT[next_extruder] ; change to next extruder\nG0 F2880 X[wipe_tower_x] Y[wipe_tower_y] ; move new extruder to wipe tower\nM104 S{temperature[next_extruder]} T[next_extruder] ; set working temperature\nM109 S{temperature[next_extruder]} T[next_extruder] ; and wait for it\n
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0

[printer:Climber7 (right)]
bed_custom_model = /home/kano/3D Printers/Climber 7/bedShape.stl
bed_custom_texture = 
bed_shape = 0x0,205x0,205x220,0x220
before_layer_gcode = 
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = ""
default_print_profile = 
deretract_speed = 0
end_gcode = G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nG28 X0 Y0\nT0\nM605 S1\nM84
extra_loading_move = -2
extruder_colour = #D8AE25
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits = 
layer_gcode = 
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 300,300
machine_max_acceleration_retracting = 500,500
machine_max_acceleration_x = 500,500
machine_max_acceleration_y = 500,500
machine_max_acceleration_z = 100,100
machine_max_feedrate_e = 50,50
machine_max_feedrate_x = 300,200
machine_max_feedrate_y = 300,200
machine_max_feedrate_z = 10,10
machine_max_jerk_e = 5,5
machine_max_jerk_x = 15,15
machine_max_jerk_y = 15,15
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.3
max_print_height = 235
min_layer_height = 0.1
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = 
printer_notes = PRINTER_CLIMBER7
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 0.5
retract_length_toolchange = 16
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M605 S0\nG21\nG90\nM82\nM107\nG28\n;G29\n\nT0\nG0 F2880 X-51 \nT1\nG0 F2880 X257\n\nT1\nG0 F2880 X257\n\nM104 S{first_layer_temperature[0]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T1 ; wait for extruder temp E1\n\nG92 E0\nG1 E16 F210\nG92 E0\n
template_custom_gcode = 
thumbnails = 
toolchange_gcode = ; start toolchange\nM104 S{temperature[current_extruder] - 25} T[current_extruder] ; lower temperature for inactive extruder\n{if current_extruder == 0 }G0 F2880 X-51 Y[wipe_tower_y]{else}G0 F2880 X257 Y[wipe_tower_y]{endif} ; move old extruder outside printing area\nT[next_extruder] ; change to next extruder\nG0 F2880 X[wipe_tower_x] Y[wipe_tower_y] ; move new extruder to wipe tower\nM104 S{temperature[next_extruder]} T[next_extruder] ; set working temperature\nM109 S{temperature[next_extruder]} T[next_extruder] ; and wait for it\n
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0

[presets]
print = C7 0.20
sla_print = 
sla_material = 
printer = Climber7
filament = C7 PLA
filament_1 = C7 PLA