FTPClient_ListFiles.ino

/******************************************************************************
  FTPClient_DownloadFile.ino

  FTP Client for Generic boards using SD, FS, etc.

  Based on and modified from

  1) esp32_ftpclient Library         https://github.com/ldab/ESP32_FTPClient

  Built by Khoi Hoang https://github.com/khoih-prog/FTPClient_Generic
******************************************************************************/

#include "Arduino.h"

#include "defines.h"

#include <FTPClient_Generic.h>

// To use `true` with the following PASV mode asnswer from server, such as `VSFTP`
// 227 Entering Passive Mode (192,168,2,112,157,218)
// Using `false` with old style PASV answer, such as `FTP_Server_Teensy41` library
// 227 Entering Passive Mode (4043483328, port 55600)
#define USING_VSFTP_SERVER      true

#if USING_VSFTP_SERVER

  // Change according to your FTP server
  char ftp_server[] = "192.168.2.112";

  char ftp_user[]   = "ftp_test";
  char ftp_pass[]   = "ftp_test";

  char dirName[]    = "/home/ftp_test";
  char newDirName[] = "/home/ftp_test/NewDir";

#else

  // Change according to your FTP server
  char ftp_server[] = "192.168.2.241";

  char ftp_user[]   = "teensy4x";
  char ftp_pass[]   = "ftp_test";

  char dirName[]    = "/";
  char newDirName[] = "/NewDir";

#endif

// FTPClient_Generic(char* _serverAdress, char* _userName, char* _passWord, uint16_t _timeout = 10000);
FTPClient_Generic ftp (ftp_server, ftp_user, ftp_pass, 60000);

void initEthernet()
{
#if USE_ETHERNET_PORTENTA_H7
  ET_LOGWARN(F("======== USE_PORTENTA_H7_ETHERNET ========"));
#elif USE_NATIVE_ETHERNET
  ET_LOGWARN(F("======== USE_NATIVE_ETHERNET ========"));
#elif USE_ETHERNET_GENERIC
  ET_LOGWARN(F("=========== USE_ETHERNET_GENERIC ==========="));
#elif USE_ETHERNET_ESP8266
  ET_LOGWARN(F("=========== USE_ETHERNET_ESP8266 ==========="));
#elif USE_ETHERNET_ENC
  ET_LOGWARN(F("=========== USE_ETHERNET_ENC ==========="));
#else
  ET_LOGWARN(F("========================="));
#endif

#if !(USE_NATIVE_ETHERNET || USE_ETHERNET_PORTENTA_H7)

#if (USING_SPI2)
#if defined(CUR_PIN_MISO)
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  CUR_PIN_SCK);
  ET_LOGWARN1(F("SS:"),   CUR_PIN_SS);
  ET_LOGWARN(F("========================="));
#endif
#else
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), MOSI);
  ET_LOGWARN1(F("MISO:"), MISO);
  ET_LOGWARN1(F("SCK:"),  SCK);
  ET_LOGWARN1(F("SS:"),   SS);
  ET_LOGWARN(F("========================="));
#endif

#if defined(ESP8266)
  // For ESP8266, change for other boards if necessary
#ifndef USE_THIS_SS_PIN
#define USE_THIS_SS_PIN   D2    // For ESP8266
#endif

  ET_LOGWARN1(F("ESP8266 setCsPin:"), USE_THIS_SS_PIN);

#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  // For ESP8266
  // Pin                D0(GPIO16)    D1(GPIO5)    D2(GPIO4)    D3(GPIO0)    D4(GPIO2)    D8
  // EthernetGeneric    X                 X            X            X            X        0
  // Ethernet_ESP8266   0                 0            0            0            0        0
  // D2 is safe to used for Ethernet, Ethernet2, Ethernet3, EthernetLarge libs
  // Must use library patch for Ethernet, EthernetLarge libraries
  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET

  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  Ethernet.init(USE_THIS_SS_PIN);

#endif  //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#elif defined(ESP32)

  // You can use Ethernet.init(pin) to configure the CS pin
  //Ethernet.init(10);  // Most Arduino shields
  //Ethernet.init(5);   // MKR ETH shield
  //Ethernet.init(0);   // Teensy 2.0
  //Ethernet.init(20);  // Teensy++ 2.0
  //Ethernet.init(15);  // ESP8266 with Adafruit Featherwing Ethernet
  //Ethernet.init(33);  // ESP32 with Adafruit Featherwing Ethernet

#ifndef USE_THIS_SS_PIN
#define USE_THIS_SS_PIN   5   //22    // For ESP32
#endif

  ET_LOGWARN1(F("ESP32 setCsPin:"), USE_THIS_SS_PIN);

  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  // Must use library patch for Ethernet, EthernetLarge libraries
  // ESP32 => GPIO2,4,5,13,15,21,22 OK with Ethernet, Ethernet2, EthernetLarge
  // ESP32 => GPIO2,4,5,15,21,22 OK with Ethernet3

  //Ethernet.setCsPin (USE_THIS_SS_PIN);
  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET

  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  Ethernet.init(USE_THIS_SS_PIN);

#endif  //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#elif ETHERNET_USE_RPIPICO

  pinMode(USE_THIS_SS_PIN, OUTPUT);
  digitalWrite(USE_THIS_SS_PIN, HIGH);

  // ETHERNET_USE_RPIPICO, use default SS = 5 or 17
#ifndef USE_THIS_SS_PIN
#if defined(ARDUINO_ARCH_MBED)
#define USE_THIS_SS_PIN   5     // For Arduino Mbed core
#else
#define USE_THIS_SS_PIN   17    // For E.Philhower core
#endif
#endif

  ET_LOGWARN1(F("RPIPICO setCsPin:"), USE_THIS_SS_PIN);

  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  // Must use library patch for Ethernet, EthernetLarge libraries
  // For RPI Pico using Arduino Mbed RP2040 core
  // SCK: GPIO2,  MOSI: GPIO3, MISO: GPIO4, SS/CS: GPIO5
  // For RPI Pico using E. Philhower RP2040 core
  // SCK: GPIO18,  MOSI: GPIO19, MISO: GPIO16, SS/CS: GPIO17
  // Default pin 5/17 to SS/CS

  //Ethernet.setCsPin (USE_THIS_SS_PIN);
  Ethernet.init (USE_THIS_SS_PIN);

#endif    //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#else   //defined(ESP8266)
  // unknown board, do nothing, use default SS = 10
#ifndef USE_THIS_SS_PIN
#define USE_THIS_SS_PIN   10    // For other boards
#endif

#if defined(BOARD_NAME)
  ET_LOGWARN3(F("Board :"), BOARD_NAME, F(", setCsPin:"), USE_THIS_SS_PIN);
#else
  ET_LOGWARN1(F("Unknown board setCsPin:"), USE_THIS_SS_PIN);
#endif

  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC || USE_NATIVE_ETHERNET )
  // Must use library patch for Ethernet, Ethernet2, EthernetLarge libraries

  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET

  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  Ethernet.init(USE_THIS_SS_PIN);

#endif  //( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )

#endif    // defined(ESP8266)

#endif    // #if !(USE_NATIVE_ETHERNET)

  // start the ethernet connection and the server:
  // Use DHCP dynamic IP and random mac
  uint16_t index = millis() % NUMBER_OF_MAC;
  // Use Static IP
  //Ethernet.begin(mac[0], ip);
  Ethernet.begin(mac[index]);

#if !(USE_NATIVE_ETHERNET || USE_ETHERNET_PORTENTA_H7)
  ET_LOGWARN(F("========================="));

#if defined( ESP32 )
  // Just info to know how to connect correctly
  // To change for other SPI
  ET_LOGWARN(F("Currently Used SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  PIN_SCK);
  ET_LOGWARN1(F("SS:"),   PIN_SS);
#else
#if defined(CUR_PIN_MISO)
  ET_LOGWARN(F("Currently Used SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  CUR_PIN_SCK);
  ET_LOGWARN1(F("SS:"),   CUR_PIN_SS);
#else
  ET_LOGWARN(F("Currently Used SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), MOSI);
  ET_LOGWARN1(F("MISO:"), MISO);
  ET_LOGWARN1(F("SCK:"),  SCK);
  ET_LOGWARN1(F("SS:"),   SS);
#endif
#endif

  ET_LOGWARN(F("========================="));

#elif (USE_ETHERNET_PORTENTA_H7)

  if (Ethernet.hardwareStatus() == EthernetNoHardware)
  {
    Serial.println("No Ethernet found. Stay here forever");

    while (true)
    {
      delay(1); // do nothing, no point running without Ethernet hardware
    }
  }

  if (Ethernet.linkStatus() == LinkOFF)
  {
    Serial.println("Not connected Ethernet cable");
  }

#endif

  Serial.print(F("Using mac index = "));
  Serial.println(index);

  Serial.print(F("Connected! IP address: "));
  Serial.println(Ethernet.localIP());
}

void setup()
{
  Serial.begin( 115200 );

  while (!Serial && millis() < 5000);

  delay(500);

  Serial.print(F("\nStarting FTPClient_ListFiles on "));
  Serial.print(BOARD_NAME);
  Serial.print(F(" with "));
  Serial.println(SHIELD_TYPE);
  Serial.println(FTPCLIENT_GENERIC_VERSION);

  initEthernet();

  ftp.OpenConnection();

  //Change directory
  ftp.ChangeWorkDir(dirName);

  // Get the file size
  String       list[128];

  // Get the directory content in order to allocate buffer
  // my server response => type=file;modify=20190101000010;size=18; helloworld.txt

  ftp.InitFile(COMMAND_XFER_TYPE_ASCII);

  ftp.ContentListWithListCommand("", list);

  for (uint16_t i = 0; i < sizeof(list); i++)
  {
    if (list[i].length() > 0)
      Serial.println(list[i]);
    else
      break;
  }

  //Create a new Directory
  ftp.InitFile(COMMAND_XFER_TYPE_BINARY);
  ftp.RemoveDir(newDirName);
  ftp.MakeDir(newDirName);

  //Enter the directory
  ftp.ChangeWorkDir(newDirName);

  Serial.println("CloseConnection");

  ftp.CloseConnection();
}

void loop()
{
}