Skip to content
This repository has been archived by the owner on Feb 4, 2023. It is now read-only.

Latest commit

 

History

History
259 lines (176 loc) · 8.21 KB

changelog.md

File metadata and controls

259 lines (176 loc) · 8.21 KB
Raw

WiFi101_Generic Changelog

arduino-library-badge GitHub release GitHub contributions welcome GitHub issues

Table of Contents

Changelog

Releases v1.0.0

  • 2022.11.17
  1. Fix severe limitation to permit sending much larger data than total 4K
  2. Use allman astyle and add utils
  3. Add Packages' Patches

Releases v0.16.1

  • 2021.05.21

Releases v0.16.0

  • 2019.04.04
  • Added WiFi.setTimeout(timeout) API to set timeout of WiFi.begin(...)
  • Changed check firmware version comparison from == to >=
  • Updated latest firmware version for model B to 19.6.1

Releases v0.15.3

  • 2018.11.21
  • Fixed unreachable destination issue in UDP packet transmission
  • Changed where required, in library's examples, the server's URL arduino.cc\80 to example.org\80, because http://arduino.cc will be no longer available
  • Changed the MAC address print in the library's example now are showed correctly all the MAC address chars
  • Fixed WiFiUDP::endPacket() return value in accord with sending returns. Thanks to @mjlitke @jrowberg
  • Changed WiFiSocketClass::create(...) return condition. Thanks to @jrowberg
  • Changed server and URL to avoid 301 response from Server
  • Fixed initialization Server issue by adding socket initialization in WiFiServer::WiFiServer constructor

Releases v0.15.2

  • 2018.02.20
  • Fixed issue with WiFiServer::begin() stopping first listening server

Releases v0.15.1

  • 2018.02.14
  • Fixed compatibility with Arduino Due
  • Fixed return code of WiFiUdp::endPacket(). Thanks @mlitke
  • Fixed WiFiServer::available() hanging after WiFi.end() is called

Releases v0.15.0

  • 2018.01.02
  • Fixed WiFi.status() hanging if no shield was present
  • Reworked socket buffer layer to prevent (SAMD) and reduce lockups (AVR)
  • Make reset pin optional. Thanks @awatterott
  • Added ability to retrieve remote IP and port of WiFiClient

Releases v0.14.3

  • 2017.06.01
  • Fixed issues with WiFiMDNSResponder and large request packets
  • Fixed issues with WiFiClient and sending data after the socket is closed

Releases v0.14.2

  • 2017.05.08
  • Fixed issues with WiFiServer::write not working

Releases v0.14.1

  • 2017.04.20
  • Fixed issues with WiFiMDNSResponder and Windows using Bonjour
  • Correct cast of buffer size when processing received data

Releases v0.14.0

  • 2017.03.22
  • Added support for firmware 19.5.2
  • Add ability to create Access Point with WPA security (f/w 19.5.2 or higher)
  • Add WiFi.hostname(name) method to set custom host name for DHCP (f/w 19.5.2 or higher)
  • Enables support for AES-256 Ciphers (f/w 19.5.2 or higher)
  • Make provisioning mode backwards compatible with f/w 19.4.4 and older

Releases v0.13.0

  • 2017.03.01
  • Added WiFi.channel() and WiFi.BSSID()

Releases v0.12.1

  • 2017.01.19
  • Fixed tomorrow day issue in WiFi.getTime()

Releases v0.12.0

  • 2017.01.05
  • Made provisioning mode easier and added example sketch
  • Fixed WiFi.getTime() not returning 0, if time has not been synced via NTP
  • Fixed crashing when connecting after scanning
  • Fixed WiFiServer::available() returning valid client on outbound client connection
  • Added WiFiUdp::beginMulticast(port) function for compatibility with EthernetUdp, as beginMulti was inconsistent

Releases v0.11.2

  • 2016.12.15
  • Fixed value of WiFi.getTime() being off by one day
  • Fixed calling WiFi.RSSI() causing lockups

Releases v0.11.1

  • 2016.11.29
  • Fixed regression for non-AVR boards that resulted in corrupt with data over than 1400 bytes was received

Releases v0.11.0

  • 2016.11.14
  • Changed WiFi.ping(...) to return round trip time on success, negative value on error. Thanks @PKGeorgiev
  • WiFi.end() now powers down the WiFi module
  • WiFi.config(ip) can now be used to set a static IP for WiFi.begin(...)
  • Fixed WiFi.BSSID(bssid) returning reversed MAC address
  • Added WiFi.APClientMacAddress() API to get MAC address of AP client in AP mode
  • Added WiFi.getTime() API to get epoch from NTP

Releases v0.10.0

  • 2016.09.08
  • Added WiFi.end() to disconnect from the AP or end AP mode
  • Added new WiFi.ping(...) functionality. Thanks @PKGeorgiev
  • Added WiFi.setPins(...) to customize the CS, INTN, RESET and CHIPEN pins
  • Add new WL_AP_LISTENING, WL_AP_CONNECTED, and WL_AP_FAILED status types for AP mode
  • Fixed return value of WiFiUDP::beginPacket(host, port) when host is successfully resolved
  • Added power management methods: WiFi.lowPowerMode(), WiFi.maxLowPowerMode(), WiFi.noLowPowerMode()
  • Close TCP sockets when physical link is disconnected
  • Fixed WiFi.RSSI() returning 0 when there was pending socket data

Releases v0.9.1

  • 2016.04.19
  • Increased compatibility with 3rd party boards and architectures.
  • Rename WiFiMdnsResponder.h/cpp to WiFiMDNSResponder.h/cpp
  • Fixed buffering of UDP packet

Releases v0.9.0

  • 2016.03.21
  • Fixed WiFi.status() hanging when shield is not present
  • Fixed MAC address returning 00:00:00:00:00:00 with firmware version 19.3.0
  • Fixed SSL write functionality with firmware version 19.3.0
  • Fixed previous version of the library not working on the Uno and other boards that used PCINT's
  • Added beginAP(...) API's to create access point with WEP passwords
  • Fixed beginAP(...) channel off by one error
  • Fixed WiFi.status() always returning WL_CONNECTED once connected, even if access point is disconnected later
  • Added beginMulti API for Multicast UDP support
  • Added WiFiMDNSResponder class and MDNS Web server example

Releases v0.8.0

  • 2016.02.15
  • Added example for Access Point web server (thanks @ladyada)
  • Fixed MAC Address printed in reverse order
  • Allow another library to override PCINT ISR (fix issues when using the WiFi101 library with other libraries like SoftwareSerial)

Releases v0.7.0

  • 2015.01.11
  • Added support for WiFi Firmware 19.4.4
  • WiFi.hostByName(...) will not try to resolve the domain name if it's already a numeric IP
  • Fixed manual IP configuration (no DHCP)
  • Fixed WiFiServer.available(), now follows API specification
  • Fixed WEP key connection
  • Fixed WiFiClient copy constructor and assignment operator. This improves stability when Client objects are assigned or returned from functions.
  • Control pins are now configurable through defines from variant.

Releases v0.6.0

  • 2015.11.27
  • Fixed bug with AVR boards when Web Server is used
  • Fixed UDP read bug on AVR Boards
  • Added missing include for SSL Client
  • Fixed peek() function
  • Fixed some examples

Releases v0.5.1

  • 2015.10.06
  • Improved support for AVR Boards (Uno, Mega, Leonardo, etc.) and ARM based boards (Due and Zero).

Releases v0.5.0

  • 2015.10.01
  • Initial release