Skip to content

Latest commit

 

History

History
139 lines (102 loc) · 4.15 KB

USAGE.md

File metadata and controls

139 lines (102 loc) · 4.15 KB

Usage

This document is by no means complete.

Common options

  • --help will show some help
  • --start_baud set at a default of 115200 (the speed of the nodemcu at boot in later versions of the firmware)
  • --baud are set at a default of 115200. This setting is used for transfers and such.
  • --port is by default /dev/ttyUSB0, /dev/tty.SLAB_USBtoUART if on Mac and COM1 on Windows
  • the environment variable SERIALPORT will override any default port

Since version v0.4.0 of the tool you will need a recent (june/july 2016) version or later of the firmware for nodemcu. The default baudrate was changed in firmware from 9600 to 115200 and this tool was changed as well. Download a recent firmware from http://nodemcu-build.com/ .

Since v0.2.1 the program works with 2 possible speeds. It connects at a default (--start_baud) of 115200 baud which is what the default firmware uses. Earlier versions of the firmware and this tool used 9600 as start baudrate. Immediately after first established communication it changes to a higher (--baud) speed, if neccesary, which defaults to 115200. This allows all communication to happen much faster without having to recompile the firmware or do any manual changes to the speed. When done and before it closes the port it changes the speed back to normal if it was changed.

Since v0.4.0 of nodemcu-uploader it tries to use the auto-baudrate feature build in to the firmware by sending a character repetedly when initiating communication. This requires a firmware from june/july 2016 or later.

Commands

Upload

From computer to esp device.

nodemcu-uploader upload init.lua 

Uploading a number of files, but saving with a different file name. If you want an alternate destination name, just add a colon ":" and the new destination filename.

nodemcu-uploader upload init.lua:new_init.lua README.md:new_README.md

Uploading with wildcard and compiling to .lc when uploaded.

nodemcu-uploader upload lib/*.lua --compile

Uploading and verify successful uploading by downloading the file to RAM and comparing contents.

nodemcu-uploader.py upload init.lua --verify=raw

Uploading and verify successful uploading by calculating the sha1 checksum on the esp and compare it to the checksum of the original file. This requires the crypto module in the firmware but it's more reliable than the raw method.

nodemcu-uploader upload init.lua --verify=sha1

###Download From esp device to computer.

Downloading a number of files. Supports multiple files. If you want an alternate destination name, just add a colon ":" and the new destination filename.

nodemcu-uploader download init.lua README.md nodemcu-uploader.py

Downloading a number of files, but saving with a different file name.

nodemcu-uploader download init.lua:new_init.lua README.md:new_README.md

List files

Listing files, using serial port com1 on Windows

nodemcu-uploader --port com1 file list

Do (execute) a file

nodemcu-uploader file do runme.lua

This file has to exist on the device before, otherwise you will get an error.

Print a file

This will show the contents of an existing file.

nodemcu-uploader file print init.lua

Listing heap memory size

nodemcu-uploader node heap

Restarting the device

nodemcu-uploader node restart

Format filesystem

nodemcu-uploader file format

Note that this can take a long time depending on size of flash on the device. Even if the tool timeout waiting for response from the device it might have worked. The tool was just not waiting long enough.

Remove specific files

nodemcu-uploader file remove foo.lua

Misc

Setting default serial-port

Using the environment variable SERIALPORT you can avoid having to type the --port option every time you use the tool.

On Windows, if your devices was connected to COM3 this could be done like this.

set SERIALPORT=com3
REM on all subsequent commands the default port `com3`would be assumed

nodemcu-uploader file list