Virtual DSM

Virtual DSM in a Docker container.

Features ✨

• Multiple disks
• KVM acceleration
• Upgrades supported

Usage 🐳

Via Docker Compose:

services:
  dsm:
    container_name: dsm
    image: vdsm/virtual-dsm
    environment:
      DISK_SIZE: "16G"
    devices:
      - /dev/kvm
      - /dev/net/tun
    cap_add:
      - NET_ADMIN
    ports:
      - 5000:5000
    volumes:
      - /var/dsm:/storage
    stop_grace_period: 2m

Via Docker CLI:

docker run -it --rm -p 5000:5000 --device=/dev/kvm --device=/dev/net/tun --cap-add NET_ADMIN --stop-timeout 120 vdsm/virtual-dsm

Via Kubernetes:

kubectl apply -f https://raw.githubusercontent.com/vdsm/virtual-dsm/refs/heads/master/kubernetes.yml

Compatibility ⚙️

Product	Platform
Docker Engine	Linux	✅
Docker Desktop	Linux	❌
Docker Desktop	macOS	❌
Docker Desktop	Windows 11	✅
Docker Desktop	Windows 10	❌

FAQ 💬

How do I use it?

Very simple! These are the steps:

• Start the container and connect to port 5000 using your web browser.

• Wait until DSM is ready, choose an username and password, and you will be taken to the desktop.

Enjoy your brand new NAS, and don't forget to star this repo!

How do I change the storage location?

To change the storage location, include the following bind mount in your compose file:

volumes:
  - /var/dsm:/storage

Replace the example path /var/dsm with the desired storage folder.

How do I change the size of the disk?

To expand the default size of 16 GB, locate the DISK_SIZE setting in your compose file and modify it to your preferred capacity:

environment:
  DISK_SIZE: "128G"

Tip

This can also be used to resize the existing disk to a larger capacity without any data loss.

How do I create a growable disk?

By default, the entire capacity of the disk is reserved in advance.

To create a growable disk that only allocates space that is actually used, add the following environment variable:

environment:
  DISK_FMT: "qcow2"

Note

This may reduce the write performance of the disk.

How do I add multiple disks?

To create additional disks, modify your compose file like this:

environment:
  DISK2_SIZE: "32G"
  DISK3_SIZE: "64G"
volumes:
  - /home/example:/storage2
  - /mnt/data/example:/storage3

How do I pass-through a disk?

It is possible to pass-through a disk device directly, by adding it to your compose file in this way:

devices:
  - /dev/disk/by-uuid/12345-12345-12345-12345-12345:/disk2

Make sure to bind the disk via its UUID (obtainable via lsblk -o name,uuid) instead of its name (/dev/sdc), to prevent ever binding the wrong disk when the drive letters happen to change.

Important

The device needs to be totally empty (without any partition table) otherwise DSM does not always format it into a volume.

Caution

Do NOT use this feature with the goal of sharing files from the host, they will all be lost without warning when DSM creates the volume.

How do I change the amount of CPU or RAM?

By default, the container will be allowed to use a maximum of 1 CPU core and 1 GB of RAM.

If you want to adjust this, you can specify the desired amount using the following environment variables:

environment:
  RAM_SIZE: "4G"
  CPU_CORES: "4"

How do I verify if my system supports KVM?

Only Linux and Windows 11 support KVM virtualization, macOS and Windows 10 do not unfortunately.

You can run the following commands in Linux to check your system:

sudo apt install cpu-checker
sudo kvm-ok

If you receive an error from kvm-ok indicating that KVM cannot be used, please check whether:

• the virtualization extensions (Intel VT-x or AMD SVM) are enabled in your BIOS.

• you enabled "nested virtualization" if you are running the container inside a virtual machine.

• you are not using a cloud provider, as most of them do not allow nested virtualization for their VPS's.

If you do not receive any error from kvm-ok but the container still complains about KVM, please check whether:

• you are not using "Docker Desktop for Linux" as it does not support KVM, instead make use of Docker Engine directly.

• it could help to add privileged: true to your compose file (or sudo to your docker run command), to rule out any permission issue.

How do I assign an individual IP address to the container?

By default, the container uses bridge networking, which shares the IP address with the host.

If you want to assign an individual IP address to the container, you can create a macvlan network as follows:

docker network create -d macvlan \
    --subnet=192.168.0.0/24 \
    --gateway=192.168.0.1 \
    --ip-range=192.168.0.100/28 \
    -o parent=eth0 vdsm

Be sure to modify these values to match your local subnet.

Once you have created the network, change your compose file to look as follows:

services:
  dsm:
    container_name: dsm
    ..<snip>..
    networks:
      vdsm:
        ipv4_address: 192.168.0.100

networks:
  vdsm:
    external: true

An added benefit of this approach is that you won't have to perform any port mapping anymore, since all ports will be exposed by default.

Important

This IP address won't be accessible from the Docker host due to the design of macvlan, which doesn't permit communication between the two. If this is a concern, you need to create a second macvlan as a workaround.

How can DSM acquire an IP address from my router?

After configuring the container for macvlan, it is possible for DSM to become part of your home network by requesting an IP from your router, just like your other devices.

To enable this mode, add the following lines to your compose file:

environment:
  DHCP: "Y"
devices:
  - /dev/vhost-net
device_cgroup_rules:
  - 'c *:* rwm'

Note

In this mode, the container and DSM will each have their own separate IPs.

How do I pass-through the GPU?

To pass-through your Intel GPU, add the following lines to your compose file:

environment:
  GPU: "Y"
devices:
  - /dev/dri

Tip

This can be used to enable the facial recognition function in Synology Photos for example.

How do I install a specific version of vDSM?

By default, version 7.2 will be installed, but if you prefer an older version, you can add its download URL to your compose file as follows:

environment:
  URL: "https://global.synologydownload.com/download/DSM/release/7.0.1/42218/DSM_VirtualDSM_42218.pat"

With this method, it is even possible to switch between different versions while keeping all your file data intact.

If you don't have internet access, it's also possible to skip the download by setting URL to:

environment:
  URL: "DSM_VirtualDSM_42218.pat"

after placing a file called DSM_VirtualDSM_42218.pat in your /storage folder.

What are the differences compared to the standard DSM?

There are only two minor differences: the Virtual Machine Manager package is not available, and Surveillance Station will not include any free licenses.

Is this project legal?

Yes, this project contains only open-source code and does not distribute any copyrighted material. Neither does it try to circumvent any copyright protection measures. So under all applicable laws, this project will be considered legal.

However, by installing Synology's Virtual DSM, you must accept their end-user license agreement, which does not permit installation on non-Synology hardware. So only run this container on an official Synology NAS, as any other use will be a violation of their terms and conditions.

Stars 🌟

Disclaimer ⚖️

Only run this container on Synology hardware, any other use is not permitted by their EULA. The product names, logos, brands, and other trademarks referred to within this project are the property of their respective trademark holders. This project is not affiliated, sponsored, or endorsed by Synology, Inc.