Makefile.f7

#
# PX4 bootloader build rules for STM32F7 targets.
# Since the STM32F7 is not supported fully in libopencm3 at this time,
# this build is a bit of a hack to use the similar IP blocks of the F469
# for RCC and USB by telling libopencm3 it is an STM32F4

OPENOCD		?= openocd

JTAGCONFIG ?= interface/olimex-jtag-tiny.cfg
#JTAGCONFIG ?= interface/jtagkey-tiny.cfg

# 5 seconds / 5000 ms default delay
PX4_BOOTLOADER_DELAY	?= 5000

SRCS		 = $(COMMON_SRCS) main_f7.c

FLAGS		+= -g -mthumb -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-sp-d16 \
       -DTARGET_HW_$(TARGET_HW) \
       -DSTM32F4 \
       -T$(LINKER_FILE) \
		   -L$(LIBOPENCM3)/lib \
		   -lopencm3_stm32f4 \
        $(EXTRAFLAGS)

#
# General rules for making dependency and object files
# This is where the compiler is called
#
include rules.mk

#upload: all flash flash-bootloader
upload: all flash-bootloader

flash-bootloader:
	$(OPENOCD) --search ../px4_bootloader -f $(JTAGCONFIG) -f stm32f4x.cfg -c init -c "reset halt" -c "flash write_image erase $(BINARY) 0x08000000" -c "reset run" -c shutdown