Introduction

TesTcl is a Tcl library for unit testing iRules which are used when configuring F5 BIG-IP devices.

News

10th November 2018 - Version 1.0.13 released
26th September 2018 - Version 1.0.12 released
24th May 2018 - Version 1.0.11 released
23rd March 2017 - Version 1.0.10 released
29th April 2016 - Version 1.0.9 released
16th December 2015 - Version 1.0.8 released

Getting started

If you're familiar with unit testing and mocking in particular, using TesTcl should't be to hard. Check out the examples below:

Simple example

Let's say you want to test the following simple iRule found in simple_irule.tcl:

rule simple {

  when HTTP_REQUEST {
    if { [HTTP::uri] starts_with "/foo" } {
      pool foo
    } else {
      pool bar
    }
  }

  when HTTP_RESPONSE {
    HTTP::header remove "Vary"
    HTTP::header insert Vary "Accept-Encoding"
  }

}

Now, create a file called test_simple_irule.tcl containing the following lines:

package require -exact testcl 1.0.13
namespace import ::testcl::*

# Comment in to enable logging
#log::lvSuppressLE info 0

it "should handle request using pool bar" {
  event HTTP_REQUEST
  on HTTP::uri return "/bar"
  endstate pool bar
  run simple_irule.tcl simple
}

it "should handle request using pool foo" {
  event HTTP_REQUEST
  on HTTP::uri return "/foo/admin"
  endstate pool foo
  run simple_irule.tcl simple
}

it "should replace existing Vary http response headers with Accept-Encoding value" {
  event HTTP_RESPONSE
  verify "there should be only one Vary header" 1 == {HTTP::header count vary}
  verify "there should be Accept-Encoding value in Vary header" "Accept-Encoding" eq {HTTP::header Vary}
  HTTP::header insert Vary "dummy value"
  HTTP::header insert Vary "another dummy value"
  run irules/simple_irule.tcl simple
}

Installing JTcl including jtcl-irule extensions

Install JTcl

Download JTcl, unzip it and add it to your path.

Add jtcl-irule to your JTcl installation

Add the jtcl-irule extension to JTcl. If you don't have the time to build it yourself, you can download the jar artifact from the downloads section or you can use the direct link. Next, copy the jar file into the directory where you installed JTcl. Add jtcl-irule to the classpath in jtcl or jtcl.bat. IMPORTANT! Make sure you place the jtcl-irule-0.9.jar on the classpath before the standard jtcl-.jar

MacOS X and Linux

On MacOs X and Linux, this can be achieved by putting the following line just above the last line in the jtcl shell script

export CLASSPATH=$dir/jtcl-irule-0.9.jar:$CLASSPATH

Windows

On Windows, modify the following line in jtcl.bat from

set cp="%dir%\jtcl-%jtclver%.jar;%CLASSPATH%"

to

set cp="%dir%\jtcl-irule-0.9.jar;%dir%\jtcl-%jtclver%.jar;%CLASSPATH%"

Verify installation

Create a script file named test_jtcl_irule.tcl containing the following lines

if {"aa" starts_with "a"} {
  puts "The jtcl-irule extension has successfully been installed"
}

and execute it using

jtcl test_jtcl_irule.tcl

You should get a success message. If you get a message saying syntax error in expression ""aa" starts_with "a"": variable references require preceding $, jtcl-irule is not on the classpath before the standard jtcl-.jar. Please review instructions above.

Add the testcl library to your library path

Download latest TesTcl distribution from github containing all the files (including examples) found in the project. Unzip, and add unzipped directory to the TCLLIBPATH environment variable:

export TCLLIBPATH=whereever/TesTcl-1.0.13

In order to run this example, type in the following at the command-line:

>jtcl test_simple_irule.tcl

This should give you the following output:

**************************************************************************
* it should handle request using pool bar
**************************************************************************
-> Test ok

**************************************************************************
* it should handle request using pool foo
**************************************************************************
-> Test ok

**************************************************************************
* it should replace existing Vary http response headers with Accept-Encoding value
**************************************************************************
verification of 'there should be only one Vary header' done.
verification of 'there should be Accept-Encoding value in Vary header' done.
-> Test ok

Explanations

Require the testcl package and import the commands and variables found in the testcl namespace to use it.
Enable or disable logging
Add the specification tests
- Describe every it statement as precisely as possible. It serves as documentation.
- Add an event . This is mandatory.
- Add one or several on statements to setup expectations/mocks. If you don't care about the return value, return "".
- Add an endstate. This could be a pool, HTTP::respond, HTTP::redirect or any other function call (see link).
- Add a verify. The verifications will be run immediately after the iRule execution. Describe every verification as precisely as possible, add as many verifications as needed in your particular test scenario.
- Add an HTTP::header initialization if you are testing modification of HTTP headers (stubs/mocks are provided for all commands in HTTP namespace).
- Add a run statement in order to actually run the Tcl script file containing your iRule. This is mandatory.

A word on the TesTcl commands

it statement takes two arguments, description and code block to execute as test case.
event statement takes a single argument - event type. Supported values are all standard HTTP, TCP and IP events .
on statement has the following syntax: on ... (return|error) result
endstate statement accepts 2 to 5 arguments which are matched with command to stop processing iRule with success in test case evaluation.
verify statement takes four arguments. Syntax: verify "DESCRIPTION" value CONDITION {verification code}
- description is displayed during verification execution
- value is expected result of verification code
- condition is operator used during comparison of value with code result (ex. ==, !=, eq).
- verification_code is code to evaluate after iRule execution
run statement takes two arguments, file name of iRule source and name of iRule to execute

A word on stubs or mockups (you choose what to call 'em)#####

HTTP namespace

Most of the other commands in the HTTP namespace have been implemented. We've done our best, but might have missed some details. Look at the sourcecode if you wonder what is going on in the mocks. In particular, the HTTP::header mockup implementation should work as expected. However insert_modssl_fields subcommand is not supported in current version.

URI namespace

Everything should be supported, with the exception of:

URI::encode
URI::decode

which is only partially supported.

GLOBAL namespace

Support for

getfield
log

Avoiding code duplication using the before command

In order to avoid code duplication, one can use the before command. The argument passed to the before command will be executed before the following it specifications.

NB! Be carefull with using on commands in before. If there will be another definition of the same expectation in it statement, only first one will be in use (this one set in before).

Using the before command, test_simple_irule.tcl can be rewritten as:

package require -exact testcl 1.0.13
namespace import ::testcl::*

# Comment in to enable logging
#log::lvSuppressLE info 0

before {
  event HTTP_REQUEST
}

it "should handle request using pool bar" {
  on HTTP::uri return "/bar"
  endstate pool bar
  run simple_irule.tcl simple
}

it "should handle request using pool foo" {
  on HTTP::uri return "/foo/admin"
  endstate pool foo
  run simple_irule.tcl simple
}

it "should replace existing Vary http response headers with Accept-Encoding value" {
  # NB! override event type set in before
  event HTTP_RESPONSE

  verify "there should be only one Vary header" 1 == {HTTP::header count vary}
  verify "there should be Accept-Encoding value in Vary header" "Accept-Encoding" eq {HTTP::header Vary}
  HTTP::header insert Vary "dummy value"
  HTTP::header insert Vary "another dummy value"
  run irules/simple_irule.tcl simple
}

On a side note, it's worth mentioning that there is no after command, since we're always dealing with mocks.

Advanced example

Let's have a look at a more advanced iRule (advanced_irule.tcl):

rule advanced {

  when HTTP_REQUEST {

    HTTP::header insert X-Forwarded-SSL true

    if { [HTTP::uri] eq "/admin" } {
      if { ([HTTP::username] eq "admin") && ([HTTP::password] eq "password") } {
        set newuri [string map {/admin/ /} [HTTP::uri]]
        HTTP::uri $newuri
        pool pool_admin_application
      } else {
        HTTP::respond 401 WWW-Authenticate "Basic realm=\"Restricted Area\""
      }
    } elseif { [HTTP::uri] eq "/blocked" } {
      HTTP::respond 403
    } elseif { [HTTP::uri] starts_with "/app"} {
      if { [active_members pool_application] == 0 } {
        if { [HTTP::header User-Agent] eq "Apache HTTP Client" } {
          HTTP::respond 503
        } else {
          HTTP::redirect "http://fallback.com"
        }
      } else {
        set newuri [string map {/app/ /} [HTTP::uri]]
        HTTP::uri $newuri
        pool pool_application
      }
    } else {
      HTTP::respond 404
    }

  }

}

The specs for this iRule would look like this:

package require -exact testcl 1.0.13
namespace import ::testcl::*

# Comment out to suppress logging
#log::lvSuppressLE info 0

before {
  event HTTP_REQUEST
}

it "should handle admin request using pool admin when credentials are valid" {
  HTTP::uri "/admin"
  on HTTP::username return "admin"
  on HTTP::password return "password"
  endstate pool pool_admin_application
  run irules/advanced_irule.tcl advanced
}

it "should ask for credentials when admin request with incorrect credentials" {
  HTTP::uri "/admin"
  HTTP::header insert Authorization "Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ=="
  verify "user Aladdin" "Aladdin" eq {HTTP::username}
  verify "password 'open sesame'" "open sesame" eq {HTTP::password}
  verify "WWW-Authenticate header is 'Basic realm=\"Restricted Area\"'" "Basic realm=\"Restricted Area\"" eq {HTTP::header "WWW-Authenticate"}
  verify "response status code is 401" 401 eq {HTTP::status}
  run irules/advanced_irule.tcl advanced
}

it "should ask for credentials when admin request without credentials" {
  HTTP::uri "/admin"
  verify "WWW-Authenticate header is 'Basic realm=\"Restricted Area\"'" "Basic realm=\"Restricted Area\"" eq {HTTP::header "WWW-Authenticate"}
  verify "response status code is 401" 401 eq {HTTP::status}
  run irules/advanced_irule.tcl advanced
}

it "should block access to uri /blocked" {
  HTTP::uri "/blocked"
  endstate HTTP::respond 403
  run irules/advanced_irule.tcl advanced
}

it "should give apache http client a correct error code when app pool is down" {
  HTTP::uri "/app"
  on active_members pool_application return 0
  HTTP::header insert User-Agent "Apache HTTP Client"
  endstate HTTP::respond 503
  run irules/advanced_irule.tcl advanced
}

it "should give other clients then apache http client redirect to fallback when app pool is down" {
  HTTP::uri "/app"
  on active_members pool_application return 0
  HTTP::header insert User-Agent "Firefox 13.0.1"
  verify "response status code is 302" 302 eq {HTTP::status}
  verify "Location header is 'http://fallback.com'" "http://fallback.com" eq {HTTP::header Location}
  run irules/advanced_irule.tcl advanced
}

it "should give handle app request using app pool when app pool is up" {
  HTTP::uri "/app/form?test=query"
  on active_members pool_application return 2
  endstate pool pool_application
  verify "result uri is /form?test=query" "/form?test=query" eq {HTTP::uri}
  verify "result path is /form" "/form" eq {HTTP::path}
  verify "result query is test=query" "test=query" eq {HTTP::query}
  run irules/advanced_irule.tcl advanced
}

it "should give 404 when request cannot be handled" {
  HTTP::uri "/cannot_be_handled"
  endstate HTTP::respond 404
  run irules/advanced_irule.tcl advanced
}

stats

Modification of HTTP headers example

Let's have a look at another iRule (headers_irule.tcl):

rule headers {

  #notify backend about SSL using X-Forwarded-SSL http header
  #if there is client certificate put common name into X-Common-Name-SSL http header
  #if not make sure X-Common-Name-SSL header is not set
  when HTTP_REQUEST {
    HTTP::header insert X-Forwarded-SSL true
    HTTP::header remove X-Common-Name-SSL
    
    if { [SSL::cert count] > 0 } {
      set ssl_cert [SSL::cert 0]
      set subject [X509::subject $ssl_cert]
      set cn ""
      foreach { label value } [split $subject ",="] {
        set label [string toupper [string trim $label]]
        set value [string trim $value]
        
        if { $label == "CN" } {
          set cn "$value"
          break
        }
      }
    
      HTTP::header insert X-Common-Name-SSL "$cn"
    }
  }

}

The example specs for this iRule would look like this:

package require -exact testcl 1.0.13
namespace import ::testcl::*

# Comment out to suppress logging
#log::lvSuppressLE info 0

before {
  event HTTP_REQUEST
  verify "There should be always set HTTP header X-Forwarded-SSL to true" true eq {HTTP::header X-Forwarded-SSL}
}

it "should remove X-Common-Name-SSL header from request if there was no client SSL certificate" {
  HTTP::header insert X-Common-Name-SSL "testCommonName"
  on SSL::cert count return 0
  verify "There should be no X-Common-Name-SSL" 0 == {HTTP::header exists X-Common-Name-SSL}
  run irules/headers_irule.tcl headers
}

it "should add X-Common-Name-SSL with Common Name from client SSL certificate if it was available" {
  on SSL::cert count return 1
  on SSL::cert 0 return {}
  on X509::subject [SSL::cert 0] return "CN=testCommonName,DN=abc.de.fg"
  verify "X-Common-Name-SSL HTTP header value is the same as CN" "testCommonName" eq {HTTP::header X-Common-Name-SSL}
  run irules/headers_irule.tcl headers
}

Classes Example

TesTcl has partial support for the class command. For example, we could test the following rule:

rule classes {
  when HTTP_REQUEST {
    if { [class match [IP::remote_addr] eq blacklist] } {
      drop
    } else {
      pool main-pool
    }
  }
}

with code that looks like this

package require -exact testcl 1.0.13
namespace import testcl::*

before {
  event HTTP_REQUEST
  class configure blacklist {
    "192.168.6.66" "blacklisted"
  }
}

it "should drop blacklisted addresses" {
  on IP::remote_addr return "192.168.6.66"
  endstate drop
  run irules/classes.tcl classes
}

it "should not drop addresses that are not blacklisted" {
  on IP::remote_addr return "192.168.0.1"
  endstate pool main-pool
  run irules/classes.tcl classes
}

How stable is this code?

This work is quite stable, but you can expect minor breaking changes.

Why I created this project

Configuring BIG-IP devices is no trivial task, and typically falls in under a DevOps kind of role. In order to make your system perform the best it can, you need:

In-depth knowledge about the BIG-IP system (typically requiring at least a $2,000 3-day course)
In-depth knowledge about the web application being load balanced
The Tcl language and the iRule extensions
And finally: A way to test your iRules

Most shops test iRules manually, the procedure typically being a variation of the following:

Create/edit iRule
Add log statements that show execution path
Push iRule to staging/QA environment
Bring backend servers up and down manually as required to test fallback scenarios
Generate HTTP-traffic using a browser and verify manually everything works as expected
Verify log entries manually
Remove or disable log statements
Push iRule to production environment
Verify manually everything works as expected

There are lots of issues with this manual approach:

Using log statements for testing and debugging messes up your code, and you still have to look through the logs manually
Potentially using different iRules in QA and production make automated deployment procedures harder
Bringing servers up and down to test fallback scenarios can be quite tedious
Manual verification steps are prone to error
Manual testing takes a lot of time
Development roundtrip-time is forever, since deployment to BIG-IP sometimes can take several minutes

Clearly, manual testing is not the way forward!

Test matrix and compatibility

	Mac Os X	Windows	Cygwin
JTcl 2.4.0	yes	yes	yes
JTcl 2.5.0	yes	yes	yes
JTcl 2.6.0	yes	yes	yes
JTcl 2.7.0	yes	yes	yes
JTcl 2.8.0	yes	yes	yes
Tclsh 8.6	yes*	yes*	?

The * indicates support only for standard Tcl commands

If you use TesTcl on a different platform, please let us know

Getting help

Post questions to the group at TesTcl user group
File bugs over at github

Contributing code

See CONTRIBUTING.md

Who uses it?

Well, I can't really tell you, but according to Google Analytics, this site gets around 10 hits per day.

License

Just like JTcl, TesTcl is licensed under a BSD-style license.

Please please please

Drop me a line if you use this library and find it useful: stefan.landro you know what gmail.com

You can also check out my LinkedIn profile or my Google+ profile, or even my twitter account - follow it for TesTcl releases

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Introduction

News

Getting started

Simple example

Installing JTcl including jtcl-irule extensions

Install JTcl

Add jtcl-irule to your JTcl installation

MacOS X and Linux

Windows

Verify installation

Add the testcl library to your library path

Explanations

A word on the TesTcl commands

A word on stubs or mockups (you choose what to call 'em)#####

HTTP namespace

URI namespace

GLOBAL namespace

Avoiding code duplication using the before command

Advanced example

Modification of HTTP headers example

Classes Example

How stable is this code?

Why I created this project

Test matrix and compatibility

Getting help

Contributing code

Who uses it?

License

Please please please

Files

README.md

Latest commit

History

README.md

File metadata and controls

Introduction

News

Getting started

Simple example

Installing JTcl including jtcl-irule extensions

Install JTcl

Add jtcl-irule to your JTcl installation

MacOS X and Linux

Windows

Verify installation

Add the testcl library to your library path

Explanations

A word on the TesTcl commands

A word on stubs or mockups (you choose what to call 'em)#####

HTTP namespace

URI namespace

GLOBAL namespace

Avoiding code duplication using the before command

Advanced example

Modification of HTTP headers example

Classes Example

How stable is this code?

Why I created this project

Test matrix and compatibility

Getting help

Contributing code

Who uses it?

License

Please please please