You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The USB -> 13.2V DC-DC booster power is available at the RJ45 socket. The booster will supply the entire panel supply via USB. There is a booster over current protection but not more! Thus there shall be a proper isolation between the USB and RJ45 supplies.
The text was updated successfully, but these errors were encountered:
Do not connect a USB cable and a 12V Power Supply via RJ45 at the same time. Workaround could be to remove the 3 USB supply diodes and supply the hardware only via the RJ45 connector.
The input voltage MOSFET reverse voltage protection shall be replaced with a simple diode in order to allow connecting both supplies, USB and RJ45 simultaneously.
The USB -> 13.2V DC-DC booster power is available at the RJ45 socket. The booster will supply the entire panel supply via USB. There is a booster over current protection but not more! Thus there shall be a proper isolation between the USB and RJ45 supplies.
The text was updated successfully, but these errors were encountered: