diff --git a/platformio.ini b/platformio.ini
index 3d7dce5..70e016c 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -19,6 +19,7 @@
 ; src_dir = examples/PCF8563_TimeSynchronization
 ; src_dir = examples/PCF85063_SimpleTime
 ; src_dir = examples/PCF85063_AlarmByUnits
+; src_dir = examples/PCF85063_ClockOutput
 ; src_dir = examples/QMC6310_CalibrateExample
 ; src_dir = examples/QMC6310_CompassExample
 ; src_dir = examples/QMC6310_GetDataExample
@@ -59,11 +60,9 @@ src_dir = examples/BHI260AP_aux_BMM150_quaternion
 ; src_dir = examples/TouchDrv_CSTxxx_GetPoint
 ; src_dir = examples/TouchDrv_CST9217_GetPoint
 
-; default_envs = esp32-s3n4r2
-; default_envs=esp32s3-opi
-; default_envs=esp32s3-qspi
-; default_envs=esp32c3
-; default_envs=esp32dev
+; default_envs = esp32dev
+; default_envs = esp32s3
+; default_envs = esp32c3
 ; default_envs = rp2040
 default_envs = nrf52840
 
@@ -76,9 +75,6 @@ lib_extra_dirs = .
 monitor_speed = 115200
 
 build_flags =
-    -DARDUINO_USB_MODE=1
-    ; -UARDUINO_USB_CDC_ON_BOOT
-    -DARDUINO_USB_CDC_ON_BOOT=1
     ; -DLOG_PORT=Serial
     ; -DSENSOR_SDA=21
     ; -DSENSOR_SCL=22
@@ -127,10 +123,15 @@ build_flags =
     ; -DSENSOR_RST=17
 
     ; T-EPD47 S3 GT911 2 Point touch✅
-    -DSENSOR_SDA=6
-    -DSENSOR_SCL=5
-    -DSENSOR_IRQ=15
-    -DSENSOR_RST=41
+    ; -DSENSOR_SDA=6
+    ; -DSENSOR_SCL=5
+    ; -DSENSOR_IRQ=15
+    ; -DSENSOR_RST=41
+
+    -DSENSOR_SDA=33
+    -DSENSOR_SCL=35
+    -DSENSOR_IRQ=34
+    -DSENSOR_RST=-1
 
     -DCORE_DEBUG_LEVEL=0
     -Wnarrowing
@@ -143,27 +144,25 @@ build_flags =
     
 [env:esp32dev]
 extends = env
-platform = espressif32
+platform = espressif32@6.7.0
 framework = arduino
 board = esp32dev
 
-[env:esp32s3-opi]
-extends = env
-platform = espressif32
-framework = arduino
-board = ESP32-S3-R8-OPI
-
 [env:esp32c3]
 extends = env
-platform = espressif32
+platform = espressif32@6.7.0
 framework = arduino
 board = esp32-c3-devkitm-1
 
-[env:esp32-s3n4r2]
+[env:esp32s3]
 extends = env
-platform = espressif32
+platform = espressif32@6.7.0
 framework = arduino
-board = ESP32-S3-N4R2-QSPI
+board = esp32-s3-devkitm-1
+build_flags = 
+    ${env.build_flags}
+    -DARDUINO_USB_CDC_ON_BOOT=1
+    ; -UARDUINO_USB_CDC_ON_BOOT
 
 [env:rp2040]
 extends = env