- fix NTP lookup if internet connection is not there
- added fallback for NTP to gateway IP
- fixed crash #1743
- merge PR: add read_temp_c to system + mqtt #1739
- improved sending limits of multiple inverters in very short timeframe #1726
- don't show '0 dBm' once no inverter is available, changed to '-- dBm'
- switch AsyncWebserver to https://github.com/mathieucarbou/ESPAsyncWebServer
- fix missing translations to German #1717
- increased maximum number of alarms to 50 for ESP32 #1470
- fix German translation #1688
- fix display of delete and edit buttons in
/setup#1372 - fix display IP in ePaper display (ETH or WiFi, static or DHCP) #1439
- fix reload after save for WiFi configurations (5s -> 20s)
- fix ePaper not functional #1722
- fix storage of timezone and region #1723
- fix save settings for ESP32 devices #1720
- translated
/system#1717 - added default pin seetings for opendtufusion board
- fixed ethernet static IP
- fixed ethernet MAC address read back
- combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed
- improved statistic data in
/system - redesigned
/system
- Ethernet variants now support WiFi as fall back / configuration
- fix boot loop once no ePaper is connected #1713, #1714
- improved refresh routine of ePeper
- added default pin seetings for opendtufusion board
- improved refresh routine of ePaper, full refresh each 12h #1107 #1706
- fix message
ERR_DUPLICATE_INVERTER#1705, #1700 - merge PR: Power limit command accelerated #1704
- merge PR: reduce update cycle of ePaper from 5 to 10 seconds #1706
- merge PR: small fixes in different files #1711
- add timestamp to JSON output #1707
- restart Ahoy using MqTT #1667
- sort alarms ascending #1471
- fix alarm counter for first alarm
- prevent add inverter multiple times #1700
- add environments for 16MB flash size ESP32-S3 aka opendtufusion
- prevent duplicate alarms, update end time once it is received #1471
- add grid file #1677
- merge PR: Bugfix Inv delete not working with password protection #1678
- merge PR: Update pubMqtt.h - Bugfix #1673 #1674
- fix ESP8266 compilation
- merge PR: active_PowerLimit #1663
- improved MqTT
OnMessage(threadsafe) - support of HERF inverters, serial number is converted in Javascript #1425
- revert buffer size in
RestAPIfor ESP8266 #1650
- fix ESP8266, ESP32 static IP #1643 #1608
- update MqTT library which enhances stability #1646
- merge PR: MqTT JSON Payload pro Kanal und total, auswählbar #1541
- add option to publish MqTT as json
- publish rssi not on ch0 any more, published on
topic/rssi - add total power to index page (if multiple inverters are configured)
- show device name in html title #1639
- update AsyncWebserver library to
3.2.2 - add environment name to filename of coredump
- add button for donwloading coredump (ESP32 variants only)
- fix ESP32 factory image generation
- fix plot of history graph #1635
- fix crash if invalid serial number was set -> inverter will be disabled automatically
- improved and fixed factory image generation
- fix HMT-1800-4T number of inputs #1628
- fix reset values at midnight if WiFi isn't available #1620
- fix typo in English versions
- add yield day to history graph #1614
- added script and instructions how to generate factory firmware which includes predefined settings
- merge PR: Fix MI overnight behaviour #1626
- possible fix reset max values #1609
- slightly improved WiFi reconnect
- update AsyncWebserver to
3.2.0
- fix reboot issue #1607 #1606
- fix max temperature tooltip if only one inverter is configured #1605
- calculation of max AC power
- fix counter overflow communication queue
- added max inverter temperature
- fix inverter communication with manual time sync #1603
- improved queue, only add new object once they not exist in queue
- added option to reset values on communication start (sunrise)
- fixed calculation of max AC power (API, MqTT)
- fix ESP8266 compile
- fix history graph
- fix close button color of modal windows in dark mode #1598
- fix only one total field in
/live#1579
- code cleanup
- fix ESP32-C3 compile
- improved wizard
- converted ePaper and Ethernet to hal-SPI
- improved network connection
- fix MqTT discovery field
ALARM_MES_ID#1591 - fix Wifi reconnect for ESP32 #1589 #1575
- open link from
index.htmlin new tab #1588 #1587 - merge PR: Disable upload and import buttons when no file is selected #1586 #1519
- revert CMT2300A changes #1553
- merged PR: fix closing tag #1584
- add disable retain flag #1582
- fix German translation #1569
- improved
Wizard
- fix hal patch
- point to git SHA for
NRF24library
- fix boot loop on
reboot on midnightfeature #1542, #1599, #1566, #1571 - fix German translation #1569
- improved
Wizard
- fix bootloop with CMT and NRF on ESP32 #1566 #1562
- possible fix of #1553
- change MqTT return value of power limit acknowledge from
booleantofloat. The value returned is the same as it was set to confirm reception (not the read back value)
- cleanup of
defines.h - fix compile of esp32-minimal
- fix reboot on inverter save (ESP32) #1559
- fix NRF and Ethernet #1506
- merge PR: fix: get refresh property from object #1552
- merge PR: fix typos and spelling in Github Issue template #1550
- merge PR: shorten last cmt waiting time #1549
- fix cppcheck warnings
- changed MqTT retained flags of some topics
- fix NTP for
opendtufusion#1542 - fix scan WiFi in AP mode
- fix MDNS #1538
- improved Wizard
- improved MqTT on devcontrol e.g. set power limit
- updated converter scripts to include all enabled features again (redundant scan of build flags) #1534
- fix captions in `/history #1532
- fix get NTP time #1529 #1530
- fix translation #1516
- fix compilation of all environments
- new network routines
- add support for newest generation of inverters with A-F in their serial number
- fix NTP and sunrise / sunset
- set default coordinates to the mid of Germany #1516
- fix precision of power limit in
/live#1517 - fix translation of
Werte ausgebeninsettings#1507 - add grid profile #1518
- fix NTP issues #1440 #1497 #1499
- switched AsyncWebServer library
- Ethernet version now uses same AsyncWebServer library as Wifi version
- fix translation of
/history - fix RSSI on
/history#1463
- improved history graph in WebUI #1491
- merge PR: 1491
- fix read back of limit value, now with one decimal place
- added grid profile for Mexico #1493
- added language to display on compile time #1484, #1255, #1479
- added new environment
esp8266-allwhich replace the originalesp8266. The original now only haveMqTTsupport butDisplayandHistoryplugins are not included any more #1451
- fix javascript issues #1480
- added preprocessor defines to HTML (from platform.ini) to reduce the HTML in size if modules aren't enabled
- auto build minimal English versions of ESP8266 and ESP32
- merge PR: Collection of small fixes #1465
- fix: show esp type on
/history#1463 - improved HMS-400-1T support (serial number 1125...) #1460
- fix MqTT statistic data overflow #1458
- add HMS-400-1T support (serial number 1125...) #1460
- removed
yield efficiencybecause the inverter already calculates correct #1243 - merge PR: Remove hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1431
- fix translations #1455 #1442
- RestAPI check for parent element to be JsonObject #1449
- fix translation #1448 #1442
- fix reset values when inverter status is 'not available' #1035 #1437
- possible fix of MqTT fix "total values are sent to often" #1421
- fix translation #1442
- availability check only related to live data #1035 #1437
- fix homeassistant autodiscovery #1432
- merge PR: more gracefull handling of complete retransmits #1433
- fixed crash once firmware version was read and sent via MqTT #1428
- possible fix: reset yield offset on midnight #1429
- fixed authentication with empty token #1415
- added new setting for future function to send log via MqTT
- combined firmware and hardware version to JSON topics (MqTT) #1212
- optimize API authentication, Error-Codes #1415
- breaking change: authentication API command changed #1415
- breaking change: limit has to be send als
float,0.0 .. 100.0#1415 - updated documentation #1415
- fix don't send control command twice #1426
- fix
opendtufusionbuild (started only once USB-console was connected) - code quality improvments
- finalized API token access #1415
- possible fix of MqTT fix "total values are sent to often" #1421
- removed
switchCyclefromhmsRadio.h#1412 - merge PR: Add hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1418
- merge PR: simplify rxOffset logic #1417
- code quality improvments
- merge PR: BugFix: ACK #1414
- fix suspicious if condition #1416
- prepared API token for access, not functional #1415
- revert changes from yesterday regarding snprintf and its size #1410, #1411
- reduced cppcheck linter warnings significantly
- try to improve ePaper (ghosting) #1107
- fix active power control value #1406, #1409
- update Mqtt lib to version
1.6.0 - take care of null terminator of chars #1410, #1411
- reduced cppcheck linter warnings significantly
- fix nullpointer during communication #1401
- added
max_powerto MqTT total values #1375
- fixed translation #1403
- fixed sending commands to inverters which are soft turned off #1397
- reduce switchChannel command for HMS (only each 5th cycle it will be send now)
- fix heuristics reset
- fix CMT missing frames problem
- removed inverter gap setting
- removed add to total (MqTT) inverter setting
- fixed sending commands to inverters which are soft turned off
- save settings before they are exported #1395
- fix autologin bug if no password is set
- translated
/serial - removed "yield day" history
- prevent sending commands to inverter which isn't active #1387
- protect commands from popup in
/liveif password is set #1199
- merge PR: Dynamic retries, pendular first rx chan #1394
- fix HMS / HMT startup
- added
flush_rxto NRF on TX - start with heuristics set to
0 - added warning for WiFi channel 12-14 (ESP8266 only) #1381
- fix HMS frequency
- fix display of inverter id in serial log (was displayed twice)
- added support for other regions - untested #1271
- fix generation of DTU-ID; was computed twice without reset if two radios are enabled
- removed patch for NRF
PLOS - fix lang issues #1388
- fix build on Windows of
opendtufusionenvironments (git: trailing whitespaces)
- add
ARCto log (NRF24 Debug) - merge PR: ETH NTP update bugfix #1385
- made code review
- fixed endless loop #1387
- updated version in footer #1381
- repaired radio statistics #1382
- add favicon to header
- improved NRF communication
- merge PR: provide localized times to display mono classes #1376
- merge PR: Bypass OOM-Crash on minimal version & history access #1378
- merge PR: Add some REST Api Endpoints to avail_endpoints #1380
- merge PR: non blocking nRF loop #1371
- merge PR: fixed millis in serial log #1373
- merge PR: fix powergraph scale #1374
- changed inverter gap to
1as default (old settings will be overridden)
- merge PR: solve display settings dependencies #1369
- fix language typos #1346
- full update of ePaper after booting #1107
- fix MqTT yield day reset even if
pause inverter during nighttimeisn't active #1368
- fix missing refresh URL #1366
- fix view of grid profile #1365
- fix webUI translation #1346
- fix protection mask #1352
- merge PR: Add Watchdog for ESP32 #1367
- merge PR: ETH support for CMT2300A - HMS/HMT #1356
- full refresh of ePaper after booting #1107
- add optional custom link #1199
- pinout has an own subgroup in
/settings - grid profile will be displayed as hex in every case #1199
- merge PR: fix immediate clearing of display after sunset #1364
- merge PR: MI-MQTT and last retransmit #1363
- fixed DTU-ID, now built from the unique part of the MAC
- fix lang in
/system#1346 - added protection to prevent update to wrong firmware (environment check)
- potential fix of update problems and random reboots #1359 #1354
- merge PR: fix reboot problem with deactivated power graph #1360
- changed scope of variables and member functions inside display classes
- removed automatically "minimal" builds
- fix include of "settings.h" (was already done in #1360)
- merge PR: Enhancement: Add info about compiled modules to version string #1357
- add info about installed binary to
/update#1353 - fix lang in
/system#1346
- added minimal version (without: MqTT, Display, History), WebUI is not changed!
- added simulator (must be activated before compile, standard: off)
- changed communication attempts back to 5
- fix history graph
- fix MqTT yield day #1331
- possible fix of 'division by zero' #1345
- fix lang #1348 #1346
- fix timestamp
max AC power#1324 - fix stylesheet overlay
max AC power#1324 - fix download link #1340
- fix history graph
- try to fix #1331
- fix translation #1346
- further improve sending active power control command faster #1332
- added history protection mask
- merge PR: display graph improvements #1347
- merge PR: added history charts to web #1336
- merge PR: small display changes #1339
- merge PR: MI - add "get loss logic" #1341
- translated
/history - fix translations in title of documents
- added translations for error messages #1343
- fix send total values if inverter state is different from
OFF#1331 - fix german language issues #1335
- merge PR: pin selection for ESP-32 S2 #1334
- merge PR: enhancement: power graph display option #1330
- reduce GxEPD2 lib to compile faster
- upgraded GxEPD2 lib to
1.5.3 - updated espressif32 platform to
6.5.0 - updated U8g2 to
2.35.9 - started to convert deprecated functions of new ArduinoJson
7.0.0 - started to have german translations of all variants (environments) #925 #1199
- merge PR: add defines for retry attempts #1329
- improved communication
- fix MqTT total values #1326
- start implementing a wizard for initial (WiFi) configuration #1199
- fix MqTT transmission of data #1326
- live data is read much earlier / faster and more often #1272
- fix display of sunrise in
/system#1308 - fix overflow of
getLossRatecalculation #1318 - improved MqTT by marking sent data and improved
last_successresends #1319 - added timestamp for
max ac poweras tooltip #1324 #1123 #1199 - repaired Power-limit acknowledge #1322
- fix
max_powerin/visualizationwas set to0after sunset
- add LED to display whether it's night time or not. Can be reused as output to control battery system #1308
- merge PR: beautifiying typography, added spaces between value and unit for
/visualization#1314 - merge PR: Prometheus add
getLossRateand bugfixing #1315 - add loss rate to
/visualizationin the statistics window - corrected
getLossRateinfos for MqTT and prometheus - added information about working IRQ for NRF24 and CMT2300A to
/system
- fix display timeout (OLED) to 60s
- change offs to signed value
- fix display of sunrise and sunset in
/system#1308 - fix MqTT set power limit #1313
- fix MqTT dis_night_comm in the morning #1309 #1286
- separated offset for sunrise and sunset #1308
- powerlimit (active power control) now has one decimal place (MqTT / API) #1199
- merge Prometheus metrics fix #1310
- merge MI grid profile request #1306
- merge update documentation / readme #1305
- add
getLossRateto radio statistics and to MqTT #1199
- fix Grid-Profile JSON #1304
- added grid profiles
- format version of grid profile
- added dim option for LEDS
- changed reload time for opendtufusion after update to 5s
- fix default interval and gap for communication
- fix serial number in exported json (was decimal, now correct as hexdecimal number)
- beautified factory reset
- added second stage for erase settings
- increased maximal number of inverters to 32 for opendtufusion board (ESP32-S3)
- fixed crash if CMT inverter is enabled, but CMT isn't configured
- improved communication thx @rejoe2
- fix
start/stop/restartcommands #1287 - added message, if profile was not read until now #1300
- added developer option to use 'syslog-server' instead of 'web-serail' #1299
- added class to handle timeouts PR #1298
- added info if grid profile was not found
- merge PR #1293
- merge PR #1295 fix ESP8266 pin settings
- merge PR #1297 fix layout for OLED displays
- fix MqTT generic topic
comm_disabled#1265 #1286 - potential fix of #1285 (reset yield day)
- fix fraction of yield correction #1280
- fix crash if
getLossRatewas read from inverter #1288 #1290 - reduce reload time for opendtufusion ethernet variant to 5 seconds
- added basic grid parser
- added ESP32-C3 mini environment #1289
- fix bug heuristic
- add version information to clipboard once 'copy' was clicked
- add get loss rate @rejoe2
- improve communication @rejoe2
- fix set power limit #1276
- read grid profile as HEX (
live-> click inverter name ->show grid profile)
- RX channel ID starts with fixed value #1277
- fix static IP for Ethernet
- fix NRF communication for opendtufusion ethernet variant
- heuristics fix #1269 #1270
- moved
sendIntervalin settings, important: will be reseted to 15s after update to this version - try to prevent access to radio classes if they are not activated
- fixed millis in serial log
- changed 'print whole trace' =
falseas default - added communication loop duration in [ms] to serial console
- don't print Hex-Payload if 'print whole trace' ==
false
- fix communication state-machine regarding zero export #1267
- fix ethernet save inverter parameters #886
- fix ethernet OTA update #886
- improved radio statistics, fixed heuristic output for HMS and HMT inverters
- improved HM communication #1259 #1249
- fix
loadDefaultsfor ethernet builds #1263 - don't loop through radios which aren't in use #1264
- added ms to serial log
- added (debug) option to configure gap between inverter requests
- copied even more from the original heuristic code #1259
- added mDNS support #1262
- possible fix of NRF with opendtufusion (without ETH)
- small fix in heuristics (if conditions made assignment not comparisson)
- fix crash if NRF is not enabled
- updated heuristic #1080 #1259
- fix compile opendtufusion fusion ethernet
- added support for opendtufusion fusion ethernet shield #886
- fixed range of HMS / HMT frequencies to 863 to 870 MHz #1238
- changed
yield effiencyper default to1.0#1243 - small heuristics improvements #1258
- added class to combine inverter heuristics fields #1258
- fixed decimal points for temperature (WebUI) PR #1254 #1251
- fixed inverter statemachine available state PR #1252 #1253
- fixed NTP update and sunrise calculation #1240 #886
- display improvments #1248 #1247
- fixed overflow in
hmRadio.h#1244
- merge PR #1239 symbolic layout for OLED 128x64 + motion senser functionality
- fix MqTT IP addr for ETH connections PR #1240
- added ethernet build for fusion board, not tested so far
- added button
copy to clipboardto/serial
- improved communication, thx @rejoe2
- improved heuristics, thx @rejoe2, @Oberfritze
- added option to strip payload of frames to significant area
- fix Mi and HM inverter communication #1235
- added privacy mode option #1211
- changed serial debug option to work without reboot
- merged PR #1234
- added new alarm codes
- removed serial interval, was not in use anymore
- fix ESP8266 save inverter #1232
- fix ESP8266 inverter settings #1226
- send radio statistics via MqTT #1227
- made night communication inverter depended
- added option to prevent adding values of inverter to total values (MqTT only) #1199
- merged PR #1225
- improved heuristics (prevent update of statitistic during testing)
- fixed endless loop while switching CMT frequency
- removed obsolete "retries" field from settings #1224
- fixed crash while defining new invertes #1224
- fixed default frequency settings
- added default input power to
400while adding new inverters - fixed color of wifi RSSI icon #1224
- changed MqTT alarm topic, removed retained flag #1212
- reduce last_success MQTT messages (#1124)
- introduced tabs in WebGUI (inverter settings)
- added inverter-wise power level and frequency
- fix yield day reset during day #848
- add total AC Max Power to WebUI
- fix opendtufusion build (GxEPD patch)
- fix null ptr PR #1222
- beautified inverter settings in
setup(preperation for future, settings become more inverter dependent)
- added tx channel heuristics (per inverter)
- fix statistics counter
- switched to new communication scheme
- prepared PA-Level for CMT
- removed settings for number of retransmits, its fixed to
5now - added parentheses to have a excactly defined behaviour
- MI control command review #1197
- moved active power control to modal in
liveview (per inverter) by click on current APC state
- fix NRF24 communication #1200
- fix communication to inverters #1198
- add timeout before payload is tried to process (necessary for HMS/HMT)
- merged
hmPayloadandhmsPayloadinto single class - merged generic radio functions into new parent class
radio.h - moved radio statistics into the inverter - each inverter has now separate statistics which can be accessed by click on the footer in
/live - fix compiler warnings #1191
- fix ePaper logo during night time #1151
- fixed typos in changelog #1172
- fixed MqTT manual clientId storage #1174
- fixed inverter name length in setup #1181
- added inverter name to the header of alarm list #1181
- improved code to avoid warning during compilation #1182
- fix scheduler #1188, #1179
- re-add another HM-400 hardware serial number accidentally removed with
0.7.45(#1169) - merge PR #1170
- reduce last_success MQTT messages (#1124)
- add re-request if inverter is known to be online and first try fails
- add alarm reporting to MI (might need review!)
- rebuild MI limiting code closer to DTUSimMI example
- round APC in
Wto an integer #1171
- fix ESP8266 save settings issue #1166
- fix Alarms are always in queue (since 0.7.56)
- fix display active power control to long for small devices #1165
- only request alarms which were not received before #1113
- added flag if alarm was requested but not received and re-request it #1105
- merge PR #1163
- fix prometheus builds
- fix ESP32 default pinout #1159
- added
opendtufusion-devbecause of annoying-DARDUINO_USB_CDC_ON_BOOT=1flag - fix display of current power on
index - fix OTA, was damaged by version
0.7.51, need to use webinstaller (from0.7.51to0.7.54)
- added active power control in
Wto live view #201, #673 - updated docu, active power control related #706
- added current AC-Power to
indexpage and removed version #763 - improved statistic data, moved to entire struct
- removed
/api/statisticsendpoint from REST-API
- fix ePaper / display night behaviour #1151
- fix ESP8266 compile error
- fix CMT configurable pins #1150, #1159
- update MqTT lib to version
1.4.5
- fix CMT configurable pins #1150
- fix default CMT pins for opendtufusion
- beautified
system - changed main loops, fix resets #1125, #1135
- moved MqTT info to
system - added CMT info for ESP32 devices
- improved CMT settings, now
SCLKandSDIOare configurable #1046, #1150 - changed
Power-Limitin live-view toActive Power Control - increase length of update file selector #1132
- merge PR: symbolic icons for mono displays, PR #1136
- merge MI code restructuring PR #1145
- merge Prometheus PR #1148
- add option to strip webUI for ESP8266 (reduce code size, add ESP32 special features;
IF_ESP32directives) - started to get CMT info into
system- not finished
- fix SSD1309 2.42" display pinout
- improved setup page: save and delete of inverters
- fix boot loop #1140
- fix regex in
setuppage - fix MI serial number display
max-module-powerinsetup#1142 - renamed
opendtufusionv1toopendtufusion
- removed
delayfrom ePaper - started improvements of
/system - fix LEDs to check all configured inverters
- send loop skip disabled inverters fix
- print generated DTU SN to console
- HW Versions for MI series PR #1133
- 2.42" display (SSD1309) integration PR #1139
- update user manual PR #1121
- add / rename alarm codes PR #1118
- revert default pin ESP32 for NRF23-CE #1132
- luminance of display can be changed during runtime #1106
- change ePaper text to symbols PR #1131
- added some invertes to dev info list #1111
- fix
last_successtransmitted to often #1124
- improved RSSI for NRF24, now it's read per package (and inverter) #1129
- arranged
heaprelated info together in/system - fix display navi during save
- clean up binary output, separated to folders
- fix ePaper for opendtufusion_v2.x boards (Software SPI)
- add signal strength for NRF24 - PR #1119
- refactor wifi class to support ESP32 S2 PR #1127
- update platform for ESP32 to 6.3.2
- fix opendtufusion LED (were mixed)
- fix
last_successtransmitted to often #1124 - added ESP32-S3-mini to github actions
- added old Changelog Entries, to have full log of changes
- merge PR #1117 code spelling fixes #1112
- alarms were not read after the first day
- added default pins for opendtu-fusion-v1 board
- fixed hw version display in
live - removed development builds, renamed environments in
platform.ini
- fix background color of invalid inputs
- add hardware info (click in
liveon inverter name)
- reset alarms at midnight (if inverter is not available) #1105, #1096
- add option to reset 'max' values on midnight #1102
- added default pins for CMT2300A (matching OpenDTU)
- fix alarm time on WebGui #1099
- added RSSI info for HMS and HMT inverters (MqTT + REST API)
- fixed timestamp for alarms send over MqTT
- auto-patch of
AsyncWebServer#834, #1036 - Update documentation in Git regarding
ESP8266default NRF24 pin assignments
- fixed timezone offset of alarms
- added
ACandDCto/live#1098 - changed
ESP8266default NRF24 pin assignments (D3=CEandD4=IRQ) - fixed background of modal window for bright color
- fix MI crashes
- fix some lost debug messages
- merged PR #1095, MI fixes for 0.7.x versions
- fix scheduled reboot #1097
- added vector graphic logo
/doc/logo.svg - merge PR #1093, improved Nokia5110 display layout
- add alarms overview to WebGui #608
- fix webGui total values #1084
- fix colors of live view #1091
- fixed docu #1085
- changed active power limit MqTT messages to QOS2 #1072
- improved alarm messages, added alarm-id to log #1089
- trigger power limit read on next day (if inverter was offline meanwhile)
- disabled improv implementation to check if it is related to 'Schwuppdizitaet'
- changed live view to gray once inverter isn't available
- added inverter status to API
- changed sum of totals on WebGui depending on inverter status #1084
- merge maximum power (AC and DC) from PR #1080
- attempt to improve speed / response times (Schwuppdizitaet) #1075
- MqTT alarm data was never sent, fixed
- REST API: added alarm data
- REST API: made get record obsolete
- REST API: added power limit acknowledge
/api/inverter/id/[0-x]#1072
- fix MI inverter support #1078
- added compile option for ethernet #886
- fix ePaper configuration, missing
Busy-Pin #1075
- fix MqTT
last_success
- merge PR #1069 make MqTT client ID configurable
- fix #1016, general MqTT status depending on inverter state machine
- changed icon for fully available inverter to a filled check mark #1070
- fixed
last_successupdate with MqTT #1068 - removed
improvesp-web-installer script, because it is not fully functional at this time
- merge PR #1056, visualization html
- update MqTT library to 1.4.4
- update RF24 library to 1.4.7
- update ArduinoJson library to 6.21.3
- set minimum invervall for
/liveto 5 seconds
- attempt to fix homeassistant auto discovery #1066
- fix MqTT YieldDay Total goes to 0 several times #1016
- merge PR #1048 version and hash in API, fixes #1045
- fix: no yield day update if yield day reads
0after inverter reboot (mostly on evening) #848 - try to fix Wifi override #1047
- added information after NTP sync to WebUI #1040
- next attempt to fix yield day for multiple inverters #1016
- reduced threshold for inverter state machine from 60min to 15min to go from state
WAS_ONtoOFF
- next attempt to fix yield day for multiple inverters #1016
- next attempt to fix yield day for multiple inverters #1016
- added two more states for the inverter status (also docu)
- next attempt to fix yield day for multiple inverters #1016
- fix export settings date #1040
- fix time on WebUI (timezone was not observed) #913 #1016
- add NTP sync interval #1019
- adjusted range of contrast / luminance setting #1041
- use only ISO time format in Web-UI #913
- fix Contrast for Nokia Display #1041
- attempt to fix #1016 by improving inverter status
- added option to adjust efficiency for yield (day/total) #1028
- merged display PR #1027
- add date, time and version to export json #1024
- added inverter status - state-machine #1016
- fix MqTT endless loop #1013
- fix MqTT endless loop #1013
- added 'improve' functions to set wifi password directly with ESP web tools #1014
- fixed MqTT publish while applying power limit #1013
- slightly improved HMT live view (Voltage & Current)
- fix
YieldDay,YieldTotalandP_ACinTotalValues#929 - fix some serial debug prints
- merge PR #1005 which fixes issue #889
- merge homeassistant PR #963
- merge PR #890 which gives option for scheduled reboot at midnight (default off)
- attempt to fix MqTT
YieldDayinTotalValues#927 - attempt to fix MqTT
YieldDayandYieldTotaleven if inverters are not completely available #929 - fix wrong message 'NRF not connected' if it is disabled #1007
- fix display of hidden SSID checkbox
- changed yield correction data type to
double, now decimal places are supported - corrected name of 0.91" display in settings
- attempt to fix MqTT zero values only if setting is there #980, #957
- made AP password configurable #951
- added option to start without time-sync, eg. for AP-only-mode #951
- fix yield day reset on midnight #957
- improved tickers in
app.cpp
- fix MqTT
P_ACsend if inverters are available #987 - fix assignments for HMS 1CH and 2CH devices
- fixed uptime overflow #990
- fix hidden SSID scan #983
- improved NRF24 missing message on home screen #981
- fix MqTT publishing only updated values #982
- fix HMS-800 and HMS-1000 assignments #981
- make nrf enabled all the time for ESP8266
- fix menu item
activehighlight for 'API' and 'Doku' - fix MqTT totals issue #927, #980
- reduce maximum number of inverters to 4 for ESP8266, increase to 16 for ESP32
- enabled power limit control for HMS / HMT devices
- changed NRF24 lib version back to 1.4.5 because of compile problems for EPS8266
- HMS / HMT support for ESP32 devices
- improved Prometheus Endpoint PR #958
- fix turn off ePaper only if setting was set #956
- improved reset values and update MqTT #957
- merge PR #902 Mono-Display
- merge PR #934 (fix JSON API) and #944 (update manual)
- improved MqTT
- fix menu active item
- added MqTT class for publishing all values in Arduino
loop
- Version available in
HMSbranch
- fix #892
zeroYieldDayloop was not applied to all channels
- merge PR #883, improved store of settings and javascript, thx @tastendruecker123
- support
.and,as floating point separator in setup #881
- increased distance for
importbutton in mobile view #879 - changed
led_high_activetobool#879
- fix #845 MqTT subscription for
ctrl/power/[IV-ID]was missing - merge PR #876, check JSON settings during read for existence
- NOTE: incompatible change: renamed
led_high_activetoact_high, maybe setting must be changed after update - merge PR #861 do not send channel metric if channel is disabled
- merge PR #846, improved NRF24 communication and MI, thx @beegee3 & @rejoe2
- merge PR #859, fix burger menu height, thx @ThomasPohl
- fix login, password length was not checked #852
- merge PR #854 optimize browser caching, thx @tastendruecker123 #828
- fix WiFi reconnect not working #851
- updated issue templates #822
- fix login from multiple clients #819
- fix login screen on small displays
- merge LED fix - LED1 shows MqTT state, LED configurable active high/low #839
- only publish new inverter data #826
- potential fix of WiFi hostname during boot up #752
- MQTT fix reconnection by new lib version #780
- add
aboutpage - improved documentation regarding SPI pins #814
- improved documentation (getting started) #815 #816
- improved MI 4-ch inverter #820
- reduced heap fragmentation by optimizing MqTT #768
- ePaper: centered text thx @knickohr
- merge: PR SPI pins configurable (ESP32) #807, #806 (requires manual set of MISO=19, MOSI=23, SCLK=18 in GUI for existing installs)
- merge: PR MI serial outputs #809
- fix: no MQTT
totalsensor for autodiscover if only one inverter was found #805 - fix: MQTT
totalrenamed todevice_name+_TOTOLfor better visibility #805
- fix: show save message
- fix: removed serial newline for
enqueueCmd - Merged improved Prometheus #808
- merged MI and debug message changes #804
- fixed MQTT autodiscover #794, #632
- merged MI, thx @rejoe2 #788
- fixed reboot message #793
- further improved save settings
- removed
#character from ePaper - fixed saving pinout for
Nokia-Display - removed
ResetPin for monochrome displays - improved wifi connection #652
- merged MI improvements, thx @rejoe2 #778
- changed display inverter online message
- merged heap improvements #772
- Warning: old exports are not compatible any more!
- fix JSON import #775
- fix save settings, at least already stored settings are not lost #771
- further save settings improvements (only store inverters which are existing)
- improved display of settings save return value
- made save settings asynchronous (more heap memory is free)
- fix SSD1306
- update documentation
- Update miPayload.h
- Update README.md
- MI - remarks to user manual
- MI - fix AC calc
- MI - fix status msg. analysis
- fix add inverter
setup.html#766 - fix MQTT retained flag for total values #726
- renamed buttons for import and export
setup.html - added serial message
settings saved
- fix limit in User_Manual.md
- changed
contrasttoluminanceinsetup.html - try to fix SSD1306 display #759
- only show necessary display pins depending on setting
- fix SH1106 rotation and turn off during night #756
- removed MQTT subscription
sync_ntp,set_timewith a value of0does the same #696 - simplified MQTT subscription for
limit. Check User_Manual.md for new syntax #696, #713 - repaired inverter wise limit control
- fix upload settings #686
- Attention: re-ordered display types, check your settings! #746
- improved saving settings of display #747, #746
- disabled contrast for Nokia display #746
- added Prometheus as compile option #719, #615
- update MQTT lib to v1.4.1
- limit decimal places to 2 in
live - added
-DPIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48to esp8266 debug build #657 - a
max-module-powerof0disables channel in live viewsetup - merge MI improvements, get firmware information #753
- added Nokia display again for ESP8266 #764
- changed
var/VArto SI unitvar#732 - fix MQTT retained flags for totals (P_AC, P_DC) #726, #721
- merged #742 MI Improvements
- merged #736 remove obsolete JSON Endpoint
- added ePaper (for ESP32 only!), thx @dAjaY85 #735
- improved
/livemargins #732 - renamed
vartoVAr#732
- improved web API for
live - added dark mode option
- converted all forms to reponsive design
- repaired menu with password protection #720, #716, #709
- merged MI series fixes #729
- fix mobile menu
- fix inverters in select
serial.html#709
- improved html and navi, navi is visible even when API dies #660
- reduced maximum allowed JSON size for API to 6000Bytes #660
- small fix: output command at
prepareDevInformCmd#692 - improved inverter handling #671
- merged PR #684, #698, #705
- webserial minor overflow fix #660
- web
index.htmlimprove version information #701 - fix MQTT sets power limit to zero (0) #692
- changed
reset at midnightwith timezone #697
- reduced heap fragmentation (removed
strtokcompletely) #644, #645, #682 - added part of mac address to MQTT client ID to separate multiple ESPs in same network
- added dictionary for MQTT to reduce heap-fragmentation
- removed
last Alarmfrom Live view, because it showed always the same alarm - will change in future
- MQTT Yield Day zero, next try to fix #671, thx @beegee3
- added Solenso inverter to supported devices
- improved reconnection of MQTT #650
- fix yield total correction as module (inverter input) value #570
- reneabled instant start communication (once NTP is synced) #674
- prevent send devcontrol request during disabled night communication
- changed yield total correction as module (inverter input) value #570
- MQTT Yield Day zero, next try to fix #671
- fix power-limit was not checked for max retransmits #667
- fix blue LED lights up all the time #672
- fix installing schedulers if NTP server isn't available
- improved zero values on triggers #671
- hardcoded MQTT subtopics, because wildcard
#leads to errors - rephrased some messages on webif, thx to @Argafal #638
- fixed 'polling stop message' on
index.html#639
- fix blue LED lights up all the time #672
- added an instant start communication (once NTP is synced)
- add MI 3rd generation inverters (10x2 serial numbers)
- first decodings of messages from MI 2nd generation inverters
- fix MQTT publishing,
callbackwas set but reset by followingsetup()
- fixed communication error #652
- reset values is no bound to MQTT any more, setting moved to
inverter#649 - fixed wording on
index.hmtl#661
- started implementation of MI inverters (setup.html, own processing
MiPayload.h)
- fixed communication #656
- fixed mixed reset flags #648
- fixed
mCbAlarmif MQTT is not used #653 - fixed MQTT
autodiscover#630 thanks to @antibill51 - next changes from @beegee many thanks for your contribution!
- replaced
CircularBufferbystd::queue - reworked
hmRadio.hcompletely (interrupts, packaging) - fix exception while
reboot - cleanup MQTT coding
- further improvements regarding wifi #611, fix connection if only one AP with same SSID is there
- fix endless loop in
zerovalues#564 - fix auto discover again #565
- added total values to autodiscover #630
- improved zero at midnight #625
- fix wrong filename for automatically created manifest (online installer) #620
- added rotate display feature #619
- improved Prometheus endpoint #615, thx to @fsck-block
- improved wifi to connect always to strongest RSSI, thx to @beegee3 #611
- reduce MQTT retry interval from maximum speed to one second
- fixed homeassistant autodiscovery #565
- implemented
getNTPTimeimprovements #609 partially #611 - added alarm messages to MQTT #177, #600, #608
- fix wakeup issue, once wifi was lost during night the communication didn't start in the morning
- re-enabled FlashStringHelper because of lacking RAM
- complete rewrite of monochrome display class, thx to @dAjaY85 -> displays are now configurable in setup
- fix power limit not possible #607
- improved payload handling (retransmit all fragments on CRC error)
- improved
isAvailable, checks all record structs, inverter becomes available more early because version is check first - fix tickers were not set if NTP is not available
- disabled annoying
FlashStringHelperit gives randomly Exceptions during development, feels more stable since then - moved erase button to the bottom in settings, not nice but more functional
- split
tx_counttotx_cntandretransmitsinsystem.html - fix mqtt retransmit IP address #602
- added debug infos for
scheduler(web ->/debugas trigger prints list of tickers to serial console)
- improved payload handling (request / retransmit) #464
- included alarm ID parse to serial console (in development)
- repaired system, scheduler was not called any more #596
- improved wifi handling and tickers, many thanks to @beegee3 #571
- fixed YieldTotal correction calculation #589
- fixed serial output of power limit acknowledge #569
- reviewed
sendDiscoveryConfig#565 - merged PR
Monodisplay, many thanks to @dAjaY85 #566, Note: (settings are introduced but not able to be modified, will be included in next version)
- corrected MQTT
comm_disabled#529 - fix Prometheus and JSON endpoints (
config_override.h) #561 - publish MQTT with fixed interval even if inverter is not available #542
- added JSON settings upload. NOTE: settings JSON download changed, so only settings should be uploaded starting from version
0.5.70#551 - MQTT topic and inverter name have more allowed characters:
[A-Za-z0-9./#$%&=+_-]+, thx: @Mo Demman - improved potential issue with
checkTicker, thx @cbscpe - MQTT option for reset values on midnight / not avail / communication stop #539
- small fix in
tickIVCommunication#534 - add
YieldTotalcorrection, eg. to have the option to zero at year start #512
- merged SH1106 1.3" Display, thx @dAjaY85
- added SH1106 to automatic build
- added IP address to MQTT (version, device and IP are retained and only transmitted once after boot) #556
- added
set_power_limitacknowledge MQTT publish #553 - changed: version, device name are only published via MQTT once after boot
- added
Loginto menu if admin password is set #554 - added
developmentto second changelog link inindex.html#543 - added interval for MQTT (as option). With this settings MQTT live data is published in a fixed timing (only if inverter is available) #542, #523
- added MQTT
comm_disabled#529 - changed name of binaries, moved GIT-Sha to the front #538
- repaired receive payload
- Powerlimit is transferred immediately to inverter
- changed calculation of start / stop communication to 1 min after last comm. stop #515
- moved payload send to
payload.h, functionivSend#515 - payload: if last frame is missing, request all frames again
- wifi, code optimization #509
- channel name can use any character, not limited any more
- added
/to MQTT topic and Inverter name - trigger for
calcSunriseis now using local time #515 - fix reconnect timeout for WiFi #509
- start AP only after boot, not on WiFi connection loss
- improved /system
free_heapvalue (measured before JSON-tree is built)
- fix Update button protection (prevent double click #527)
- optimized scheduler #515 (thx @beegee3)
- potential fix of #526 duplicates in API
/api/record/live - added update information to
index.html
- fix MQTT
statusupdate - removed MQTT
available_text(can be deducted fromavailable) - enhanced MQTT documentation in
User_Manual.md - removed
tickSunsetandtickSunrisefrom MQTT. It's not needed any more because of minute wise check of status (processIvStatus) - changed MQTT topic
statusto nummeric value, check documentation inUser_Manual.md - fix regular expression of
setup.htmlfor inverter name and channel name
- fix #521 no reconnect at beginning of day
- added immediate (each minute) report of inverter status MQTT #522
- added protection mask to select which pages should be protected
- update of monochrome display, show values also if nothing changed
- added regex to inverter name and MQTT topic (setup.html)
- beautified serial.html
- added ticker for wifi loop #515
- fix night communication enable
- improved different WiFi connection scenarios (STA WiFi not found, reconnect #509, redirect for AP to configuration)
- increased MQTT user, pwd and topic length to 64 characters +
\0. (The string end\0reduces the available size by one) #516
- improved stability
- improved WiFi initial connection - especially if station WiFi is not available
- removed new operators from web.h (reduce dynamic allocation)
- improved sun calculation #515, #505
- fixed WiFi auto reconnect #509
- added disable night communication flag to MQTT #505
- changed MQTT publish of
availableandavailable_textto sunset #468
- improved stability
- added icons to index.html, added WiFi-strength symbol on each page
- moved packet stats and sun to system.html
- refactored communication offset (adjustable in minutes now)
- factory reset formats entire little fs
- renamed sunrise / sunset on index.html to start / stop communication
- show system information only if called directly from menu
- beautified system.html
- fixed static IP save
- changed sunrise / sunset calculation, angle is now
-3.5instead of original-0.83 - improved scheduler (removed -1 from
reload) #483 - improved reboot flag in
app.h - fixed #493 no MQTT payload once display is defined
- Mono-Display: show values in offline mode #498
- improved WiFi class #483
- added communication enable / disable (to test multiple DTUs with the same inverter)
- fix factory reset #495
- improved ahoyWifi class
- added interface class for app
- refactored web and webApi -> RestApi
- fix calcSunrise was not called every day
- added MQTT RX counter to index.html
- all values are displayed on /live even if they are 0
- added MQTT /status to show status over all inverters
- improved scheduler, @beegee3 #483
- refactored get NTP time, @beegee3 #483
- generate
bin.gzonly for 1M device ESP8285 - fix calcSunrise was not called every day
- increased number of allowed characters for MQTT user, broker and password, @DanielR92
- added NRF24 info to Systeminfo, @DanielR92
- added timezone for monochrome displays, @gh-fx2
- added support for second inverter for monochrome displays, @gh-fx2
- fixed scheduler, uptime and timestamp counted too fast
- added / renamed automatically build outputs
- fixed MQTT ESP uptime on reconnect (not zero any more)
- changed uptime on index.html to count each second, synced with ESP each 10 seconds
- fixed AP mode on brand new ESP modules
- fixed
last_successMQTT message - fixed MQTT inverter available status at sunset
- reordered enqueue commands after boot up to prevent same payload length for successive commands
- added automatic build for Nokia5110 and SSD1306 displays (ESP8266)
- added MQTT message send at sunset
- added monochrome display support
- added
onceandonceAtto scheduler to make code cleaner - improved sunrise / sunset calculation
- refactored ahoyWifi class: AP is opened on every boot, once station connection is successful the AP will be closed
- improved NTP sync after boot, faster sync
- fix NRF24 details only on valid SPI connection
- fix sunrise / sunset calculation
- improved setup.html:
reboot on saveis checked as default
- changed MQTT last will topic from
statustomqtt - fix sunrise / sunset calculation
- fix time of serial web console
- marked some MQTT messages as retained
- moved global functions to global location (no duplicates)
- changed index.html interval to static 10 seconds
- fix static IP
- fix NTP with static IP
- print MQTT info only if MQTT was configured
- updated REST API and MQTT (both of them use the same functionality)
- added ESP-heap information as MQTT message
- changed output name of automatic development build to fixed name (to have a static link from https://ahoydtu.de)
- updated user manual to latest MQTT and API changes
- fix web logout (auto logout)
- switched MQTT library