Ham: keep green NeoPixel light off when 'No receive' option is selected

lyusupov · Aug 7, 2023 · b7f69da · b7f69da
1 parent fe38a7f
commit b7f69da
Show file tree

Hide file tree

Showing 7 changed files with 34 additions and 9 deletions.
diff --git a/documents/images/ham-1.jpg b/documents/images/ham-1.jpg
diff --git a/documents/images/ham-2.jpg b/documents/images/ham-2.jpg
diff --git a/documents/images/midi-2.jpg b/documents/images/midi-2.jpg
diff --git a/software/firmware/binaries/ESP32/SkyView/README.md b/software/firmware/binaries/ESP32/SkyView/README.md
@@ -88,7 +88,21 @@ Three more of [hardware platforms](https://github.com/lyusupov/SoftRF#by-process
 
 ### Known issues and limitations
 
-TBD
+* same that previous 0.12 release has, **plus**
+* **RP2040:** PIO USB Host is kind of fragile and can cause issues when Wi-Fi or Bluetooth is active. When USB is your primary connection method - activate Wi-Fi 'power saving' feature to disable the Wi-Fi while it is not in use. When you use Wi-Fi of Bluetooth as a primary connection method - do NOT connect any device to the RP2040 PIO USB port ;
+* **ESP32-S3**: pictore on the GDEY027T91 display may partially loose contrast after a sequence of screen updates. One should consider to activate [e-Paper 'ghosts' removal](https://github.com/lyusupov/SoftRF/wiki/SkyView-settings#e-paper-ghosts-removal) procedure as a workaroud.
+
+### Flashing instructions
+
+&nbsp;&nbsp;&nbsp;&nbsp;**ESP32:**<br>
+&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;'[Web Update](https://github.com/lyusupov/SoftRF/wiki/Firmware-update-%28Web-method%29#esp32)' method should work just fine when you are updating from **Regular** 0.12.<br>
+&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;In case of troubles - use generic ('cable') method instead. Follow **Step 1** and **Step 2** of this [**Quick start**](https://github.com/lyusupov/SoftRF/wiki/SkyView.-Quick-start) guidance.<br>
+&nbsp;&nbsp;&nbsp;&nbsp;**RP2040:**<br>
+&nbsp;&nbsp;&nbsp;&nbsp;**ESP32-S3:**<br>
+&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Both RP2040 and ESP32-S3 platforms can do firmware update over USB connection when the firmware binary is in UF2 format.<br>
+&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Follow **SkyView Pico** firmware installation procedure as explained on [this page](https://github.com/lyusupov/SoftRF/wiki/SkyView-Pico.-Quick-start).<br>
+
+<br>
 
 ## revision 0.12
 

diff --git a/software/firmware/source/SoftRF/src/driver/RF.cpp b/software/firmware/source/SoftRF/src/driver/RF.cpp
@@ -2294,7 +2294,9 @@ extern NeoPixelBus<NeoGrbFeature, Neo800KbpsMethod> TWR2_Pixel;
 void sa868_Tx_LED_state(bool val) {
   if (hw_info.model == SOFTRF_MODEL_HAM) {
 #if defined(USE_NEOPIXELBUS_LIBRARY)
-    TWR2_Pixel.SetPixelColor(0, val ? LED_COLOR_RED : LED_COLOR_GREEN);
+    TWR2_Pixel.SetPixelColor(0, val ? LED_COLOR_RED :
+                             settings->power_save & POWER_SAVE_NORECEIVE ?
+                             LED_COLOR_BLACK : LED_COLOR_GREEN);
     TWR2_Pixel.Show();
 #endif /* USE_NEOPIXELBUS_LIBRARY */
   }
@@ -2384,7 +2386,8 @@ static void sa8x8_setup()
     }
   }
 
-  controller.setGroup(0 /* TBD */, MHz, MHz, 0, 1, 0);
+  byte sq = settings->power_save & POWER_SAVE_NORECEIVE ? 8 : 1;
+  controller.setGroup(0 /* TBD */, MHz, MHz, 0, sq, 0);
 
   if (controller.getModel() == Model::SA_868) {
     aprs_preamble = 350UL * 3;
@@ -2409,6 +2412,14 @@ static void sa8x8_setup()
   APRS_setTail(aprs_tail);
   APRS_setSymbol('\'');
 
+  if (hw_info.model == SOFTRF_MODEL_HAM) {
+#if defined(USE_NEOPIXELBUS_LIBRARY)
+    TWR2_Pixel.SetPixelColor(0, settings->power_save & POWER_SAVE_NORECEIVE ?
+                             LED_COLOR_BLACK : LED_COLOR_GREEN);
+    TWR2_Pixel.Show();
+#endif /* USE_NEOPIXELBUS_LIBRARY */
+  }
+
   APRS_setTxLEDCallback(sa868_Tx_LED_state);
 
   // You don't need to set the destination identifier, but

diff --git a/software/firmware/source/SoftRF/src/platform/ESP32.cpp b/software/firmware/source/SoftRF/src/platform/ESP32.cpp
@@ -1117,8 +1117,6 @@ static void ESP32_setup()
 #if defined(USE_NEOPIXELBUS_LIBRARY)
       TWR2_Pixel.Begin();
       TWR2_Pixel.Show(); // Initialize all pixels to 'off'
-      TWR2_Pixel.SetPixelColor(0, LED_COLOR_GREEN);
-      TWR2_Pixel.Show();
 #endif /* USE_NEOPIXELBUS_LIBRARY */
     } else {
       WIRE_FINI(Wire);

diff --git a/software/firmware/source/SoftRF/src/protocol/radio/APRS.cpp b/software/firmware/source/SoftRF/src/protocol/radio/APRS.cpp
@@ -218,10 +218,12 @@ size_t aprs_encode(void *pkt, ufo_t *this_aircraft) {
   uint8_t addr_type = id == SOFTRF_ADDRESS ? ADDR_TYPE_ICAO : ADDR_TYPE_ANONYMOUS;
 #endif
 
-  //snprintf(buf, sizeof(buf), "FLR%06X", id);
-  //APRS_setCallsign(buf, 0);
+  // snprintf(buf, sizeof(buf), "FLR%06X", id);
+  // snprintf(buf, sizeof(buf), "OGN%06X", id);
+  // APRS_setCallsign(buf, 0);
 
-  APRS_setDestination("OGNFLR", 0);
+  // APRS_setDestination("OGNFLR", 0);
+  APRS_setDestination("OGNTRK", 0);
 
   // Let's first set our latitude and longtitude.
   // These should be in NMEA format!
@@ -255,7 +257,7 @@ size_t aprs_encode(void *pkt, ufo_t *this_aircraft) {
                 (addr_type                     );
 
   snprintf(Outgoing_APRS_Comment, sizeof(Outgoing_APRS_Comment),
-           "%03d/%03d/A=%06d !W00! id%08X",
+           "%03d/%03d/A=%06d !W00! id%08X +000fpm +0rot gps8x3",
            (course_i == 0) ? 360 : course_i,
            (int) this_aircraft->speed,        /* knots */
            (altitude_i < 0) ? 0 : altitude_i, /* feet  */