Academy Edition
| Type | Protocol | FLARM | OGN tracker | PilotAware | Skytraxx | SoftRF |
|---|---|---|---|---|---|---|
| Radio | FLARM AIR V6 |
|
|
|
||
OGNTP |
|
|
||||
P3I |
|
|
||||
FANET+ |
|
|
||||
| Data | FLARM NMEA |
|
|
|
|
|
| Garmin GDL90 |
|
|
||||
Dump1090 |
|
1 - it is necessary for a reader to distinguish the difference between statement "compatible"
and statement "fully compatible".
SoftRF implements only a reasonable minimum of the protocols specs.
No "bells and whistles" so far.
In general a lot of Chinese DIY electronics manufacturers are known to behave this way:
- sometimes they may not apply necessary Q.C. before releasing of a product from factory ;
- they may arbitrary change schematics and electronic components from one batch to the next one ;
- they may terminate manufacturing of a board just few month after initial production.
Because of that, author of SoftRF:
- will reject any hardware related claims associated with Dragino Lora/GPS Shield. Ask for support from seller or manufacturer ;
- reserves the right to suspend or terminate support of Dragino Lora/GPS in the firmware at any time.
For the time being ( December '21 ) there were no critical hardware issues reported for current version of the Dragino Lora/GPS Shield. However things my change over the time...
If you have issues with bringing up your new Lora/GPS Shield or just not happy with the board - be prepared to execute your Purchase Protection plan.
| Number | Part | Qty | Picture | Source |
|---|---|---|---|---|
| 1 | Arduino m0 or Zero | 1 |  |
TBD |
| 2 | Dragino Lora/GPS Shield 2 | 1 | |
TBD |
2 - 868 MHz variant is applicable for these world regions: EU, RU, NZ, SA, IN ;
915 MHz - US, CA, AU, IL, KR ;
433 MHz - CN .
TBD
Procedure of settings change is very similar to that the Dongle Edition has.
Settings description is located there.
- (Dragino Lora/GPS Shield wiki)[://wiki.dragino.com/index.php?title=Lora/GPS_Shield]
- (Dragino Lora/GPS Shield schematic)[https://github.com/dragino/Lora/raw/master/Lora%20GPS%20Shield/mother%20board/v1.3/Lora%20GPS%20Shield%20v1.3.sch.pdf] and GitHub page
- Arduino m0 schematic
