Display and extend your Nano with these different stands.
This stand holds your Nano vertically off your worksurface, and has some space for neatly routing cables.
Stand (Side) | Stand (Image) |
---|---|
This stand integrates a clip to hold a portable battery, in case your power source is too far away.
Stand with Battery (Side) | Stand with Battery (Axon) |
---|---|
This stand add a few nodes for attaching 15mm x 15mm extruded aluminium rails. This lets you more easily create a custom rig for your Nano — for example, like this custom Sketch Recognition rig:
Stand with Battery and Rail (Side) | Stand with Battery and Rail (Image) |
---|---|
Jetson Nano Stand | Stand with Battery Clip | Stand with Battery Clip and Extruded Aluminium |
---|---|---|
jetson_nano_clip-feet.stl | jetson_nano_clip-feet-battery.stl | jetson_nano_clip-feet-battery-rail.stl |
Item | Qty | Reference |
---|---|---|
Nano Stand | 2 | jetson_nano_clip-feet.stl |
Nano Stand with Battery Clip | 2 | jetson_nano_clip-feet-battery.stl |
Nano Stand with Battery Clip and Extruded Aluminium Extensions | 2 | jetson_nano_clip-feet-battery-rail.stl |
Portable Battery | 1 | INUI Power Bank |
- Print your desired Stand at 20% infill.
- Orient your Nano vertically and snap your Jetson Nano into the front the Stand — you should hear a nice click sound.
- If you're adding a Portable Battery, orient your battery horizontally and snap the battery into the back of the Stand — you should hear a nice click sound.
Each of these parts were printed on a Prusa i3 MK3S printer using the MK3S_MK3_0.2_Fast profile (0.2mm layer height) with PLA.
- The Clips for the Nano and Battery were derived from this 8020 Rail ATMega2560 Clip by the_digital_dentist.