Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

关于发表论文和研究成果的另一种解决方案 #19

Closed
hushidong opened this issue May 9, 2019 · 9 comments
Closed

关于发表论文和研究成果的另一种解决方案 #19

hushidong opened this issue May 9, 2019 · 9 comments

Comments

@hushidong
Copy link

从resume.tex文档看，发表论文和研究成果是以enumerate直接写的，但其实因为这些信息也类似于参考文献信息，因此完全可以利用参考文献的解决方案来避免大量的人工书写。

从其内容看，两者与参考文献的差别仅在于文献条目的格式，比如没有文献类型标识符，文献的作者的格式是不同的，条目后面还存在一个注释(说明)信息，而这些差异完全可以利用格式局部化调整的方式来实现。

下面给出一个示例，来展示这样的局部化调整，其中为同时给出作者年制的文献表，使用了gb7714-2015mx样式。后面的第二个示例是精确实现resume.tex样式的。

\documentclass[twoside]{article}
    \usepackage{ctex}
    \usepackage{xcolor}
    \usepackage{toolbox}
    \usepackage{hyperref}
    \usepackage{lipsum}
    \usepackage[paperwidth=21cm,paperheight=29cm,top=10pt,bottom=10pt,left=1cm,right=1cm]{geometry}

\usepackage[backend=biber,style=gb7714-2015mx]{biblatex}

\setaystylesection{1}

\usepackage{filecontents}
\begin{filecontents}{\jobname.bib}
% Encoding: UTF-8
@article{ref-1-1-Yang,
author    = {Yang, Y and Ren, T L and Zhang, L T and others},
title     = {Miniature microphone with silicon-based ferroelectric thin films},
journal   = {Integrated Ferroelectrics},
date      = {2003},
pages      = {229-235},
volume      = {52},
annotation      = {SCI 收录, 检索号:758FZ},
}

@article{ref-2-1-杨轶,
author    = {杨轶 and 张宁欣 and 任天令 and others},
title     = {硅基铁电微声学器件中薄膜残余应力的研究},
journal   = {中国机械工程},
pages= {1289-1291},
date      = {2005},
volume      = {16},
number ={14},
annotation ={EI 收录, 检索号:0534931 2907},
}

@article{ref-3-1-杨轶,
author    = {杨轶 and 张宁欣 and 任天令 and others},
title     = {集成铁电器件中的关键工艺研究},
journal   = {仪器仪表学报},
date      = {2003},
volume      = {24},
pages={192-193},
number      = {S4},
annotation      = {EI 源刊},
}

@article{ref-4-1-Yang,
author    = {Yang, Y and Ren, T L and Zhu, Y P and others},
title     = {PMUTs for handwriting recognition},
pubstate ={In press},
annotation      = {已被 Integrated Ferroelectrics 录用. SCI 源刊.},
}


@article{ref-5-1-Wu,
author    = {Wu, X M and Yang, Y and Cai, J and others},
title     = {Measurements of ferroelectric MEMS microphones},
journal   = {Integrated Ferroelectrics},
date      = {2005},
pages={417-429},
volume      = {69},
annotation      = {SCI 收录, 检索号 :896KM.},
}


@article{ref-6-1-贾泽,
author    = {贾泽 and 杨轶 and 陈兢 and others},
title     = {用于压电和电容微麦克风的体硅腐蚀相关研究},
journal   = {压电与声光},
date      = {2006},
pages      = {117-119},
number={1},
volume      = {28},
annotation      = {EI 收录, 检索号:06129773469.},
}


@article{ref-7-1-伍晓明,
author    = {伍晓明 and 杨轶 and 张宁欣 and others},
title     = {基于MEMS技术的集成铁电硅微麦克风},
journal   = {中国集成电路},
date      = {2003},
volume      = {53},
pages      = {59-61},
}

@patent{ref-8-1-任天令,
author    = {任天令 and 杨轶 and 朱一平 and others},
title     = {硅基铁电微声学传感器畴极化区域控制和电极连接的方法},
number ={中国, CN1602118A},
annotation      = {中国专利公开号.},
}

@patent{ref-9-1-Ren,
author    = {Ren, T L and Yang, Y and Zhu, Y P and others},
title     = {Piezoelectric micro acoustic sensor based on ferroelectric materials},
number ={USA, No.11/215, 102},
annotation      = {美国发明专利申请号.},
}
\end{filecontents}


    \addbibresource{\jobname.bib}
    %


    \begin{document}


    \nocite{*}
    \printbibliography


    \begin{refsection}

    \settoggle{bbx:gbtype}{false}%局部设置不输出文献类型和载体标识符
    \settoggle{bbx:gbannote}{true}%局部设置输出注释信息
    \setcounter{gbnamefmtcase}{1}%局部设置作者的格式为大小写不变的国标格式
    \nocite{ref-1-1-Yang,ref-2-1-杨轶,ref-3-1-杨轶,ref-4-1-Yang,ref-5-1-Wu,ref-6-1-贾泽,ref-7-1-伍晓明}

    \printbibliography[title={论文成果}]

    \end{refsection}


    \begin{refsection}

    \settoggle{bbx:gbtype}{false}%局部设置不输出文献类型和载体标识符
    \settoggle{bbx:gbannote}{true}%局部设置输出注释信息
    \setcounter{gbnamefmtcase}{3}%局部设置作者的格式为familyahead格式
    \nocite{ref-8-1-任天令,ref-9-1-Ren}

    \printbibliography[title={专利成果}]

    \end{refsection}

    \end{document}

结果为：

图片
@hushidong
Copy link
Author

hushidong commented May 9, 2019 •
edited
Loading

第二个示例：

\documentclass[twoside]{article}
    \usepackage{ctex}
    \usepackage{xcolor}
    \usepackage{toolbox}
    \usepackage{hyperref}
    \usepackage{lipsum}
    \usepackage[paperwidth=21cm,paperheight=29cm,top=10pt,bottom=10pt,left=1cm,right=1cm]{geometry}

\usepackage[backend=biber,style=gb7714-2015]{biblatex}

%\setaystylesection{1}

\usepackage{filecontents}
\begin{filecontents}{\jobname.bib}
% Encoding: UTF-8
@article{ref-1-1-Yang,
author    = {Yang, Y and Ren, T L and Zhang, L T and others},
title     = {Miniature microphone with silicon-based ferroelectric thin films},
journal   = {Integrated Ferroelectrics},
date      = {2003},
pages      = {229-235},
volume      = {52},
annotation      = {SCI 收录, 检索号:758FZ},
}

@article{ref-2-1-杨轶,
author    = {杨轶 and 张宁欣 and 任天令 and others},
title     = {硅基铁电微声学器件中薄膜残余应力的研究},
journal   = {中国机械工程},
pages= {1289-1291},
date      = {2005},
volume      = {16},
number ={14},
annotation ={EI 收录, 检索号:0534931 2907},
}

@article{ref-3-1-杨轶,
author    = {杨轶 and 张宁欣 and 任天令 and others},
title     = {集成铁电器件中的关键工艺研究},
journal   = {仪器仪表学报},
date      = {2003},
volume      = {24},
pages={192-193},
number      = {S4},
annotation      = {EI 源刊},
}

@article{ref-4-1-Yang,
author    = {Yang, Y and Ren, T L and Zhu, Y P and others},
title     = {PMUTs for handwriting recognition},
pubstate ={In press},
annotation      = {已被 Integrated Ferroelectrics 录用. SCI 源刊.},
}


@article{ref-5-1-Wu,
author    = {Wu, X M and Yang, Y and Cai, J and others},
title     = {Measurements of ferroelectric MEMS microphones},
journal   = {Integrated Ferroelectrics},
date      = {2005},
pages={417-429},
volume      = {69},
annotation      = {SCI 收录, 检索号 :896KM.},
}


@article{ref-6-1-贾泽,
author    = {贾泽 and 杨轶 and 陈兢 and others},
title     = {用于压电和电容微麦克风的体硅腐蚀相关研究},
journal   = {压电与声光},
date      = {2006},
pages      = {117-119},
number={1},
volume      = {28},
annotation      = {EI 收录, 检索号:06129773469.},
}


@article{ref-7-1-伍晓明,
author    = {伍晓明 and 杨轶 and 张宁欣 and others},
title     = {基于MEMS技术的集成铁电硅微麦克风},
journal   = {中国集成电路},
date      = {2003},
volume      = {53},
pages      = {59-61},
}

@patent{ref-8-1-任天令,
author    = {任天令 and 杨轶 and 朱一平 and others},
title     = {硅基铁电微声学传感器畴极化区域控制和电极连接的方法},
number ={中国, CN1602118A},
annotation      = {中国专利公开号.},
}

@patent{ref-9-1-Ren,
author    = {Ren, T L and Yang, Y and Zhu, Y P and others},
title     = {Piezoelectric micro acoustic sensor based on ferroelectric materials},
number ={USA, No.11/215, 102},
annotation      = {美国发明专利申请号.},
}
\end{filecontents}


    \addbibresource{\jobname.bib}
    %


    \begin{document}


    \nocite{*}
    \printbibliography


    \begin{refsection}

    \settoggle{bbx:gbtype}{false}%局部设置不输出文献类型和载体标识符
    \settoggle{bbx:gbannote}{true}%局部设置输出注释信息
    \setcounter{gbnamefmtcase}{1}%局部设置作者的格式为大小写不变的国标格式
    \nocite{ref-1-1-Yang,ref-2-1-杨轶,ref-3-1-杨轶,ref-4-1-Yang,ref-5-1-Wu,ref-6-1-贾泽,ref-7-1-伍晓明}

    \printbibliography[title={论文成果}]

    \end{refsection}


    \begin{refsection}

    \settoggle{bbx:gbtype}{false}%局部设置不输出文献类型和载体标识符
    \settoggle{bbx:gbannote}{true}%局部设置输出注释信息
    \setcounter{gbnamefmtcase}{1}%局部设置作者的格式为familyahead格式
    \nocite{ref-8-1-任天令,ref-9-1-Ren}

    \printbibliography[title={专利成果}]

    \end{refsection}

    \end{document}

结果为：

图片

@hushidong
Copy link
Author

这一解决方案，可以将所有的与文献相关的信息，同一放到bib文件中来同一管理，唯一要增加的就是annotation或annote域，用来放，条目后的注释信息。

当然，
因为才看到你们的模板不久，且格式问题，比如注释信息问题，是才产生的。因此相比之前的看到北邮模板需要增加一个annotation或annote域来解决，所以对biblatex-gb7714-2015做了更新。所以要使用这种解决方案，那么需要使用最新的biblatex-gb7714-2015，因为暂时还没有更新到ctan上，所以目前只能从github上下载了。

@marquistj13
Copy link
Owner

感谢大神的指导，我先花时间消化一下。

我目前有如下想法：

  1. 鉴于我的bib文件是zotero自动更新的，因此不宜直接操作这个bib文件，可新建一个bib文件填入resume中的“文献”信息。
  2. 两个或多个bib文件可通过多个 \addbibresource 实现。

等有时间了我就搞一下。:blush:

Best,

@hushidong
Copy link
Author

好，加bib文件时除了直接用addbibresource外，可以直接在启用refsection环境时加入，比如:

\begin{refsection}[resume.bib]

\nocite{*}

\printbibliography

\end{refsection}

@marquistj13
Copy link
Owner

good 👍

@marquistj13
Copy link
Owner

marquistj13 commented May 11, 2019 •
edited
Loading

@hushidong 您好，我尝试了您的方案，遇到一点困难。
描述如下：

  1. 对于你给的第二个示例，我将resume中的参考文献存为resume.bib 文件，发现没有问题，和你的输出一样。
  2. 对于我校的模板，也采用新建 resume.bib 文件的方式，发现 论文成果 和 专利成果 部分会分别另起一页。（对应的修改放在了 resume branch）

其实对于我校模板的参考文献 部分，它也是自动新起一页，然后作为标题居中的，我一开始用的时候就没搞明白它是什么原理。现在终于到了要解决的地步了。
我猜测 \printbibliography 有对应的选项来控制是否另起一页么？不过我看了你的文档，貌似 \printbibliography 部分没讲这个。

Best regards,

@hushidong
Copy link
Author

是这样的，biblatex中，printbibliography命令有一个heading参数用于控制参考文献标题的层级，默认情况下是heading=bibliography，对于book或report类，该选项的意义是标题的层级与chapter相同，因此会自动换页，如果设置其他值，就会有所不同。比如设置heading=subbibliography，表示与当前默认层级的下一级相同，所以在book或report类中会与section层级相同。如果要去除标题那么可以设置为none。当然在article类中heading=bibliography的默认层级是section，因此是不同的，这里不再赘述。因此，如果在book或report类中若不需要换页，则简单的设置heading=subbibliography即可。当然也可以对heading=bibliography的内部代码进行重定义，但那样又会对全文的文献表产生影响。为此，我们只需要在resume中局部的使用heading=subbibliography。

比如：

\documentclass[twoside]{book}
    \usepackage{ctex}
    \usepackage{xcolor}
    \usepackage{toolbox}
    \usepackage{hyperref}
    \usepackage{lipsum}
    \usepackage[paperwidth=21cm,paperheight=29cm,top=10pt,bottom=10pt,left=1cm,right=1cm]{geometry}

\usepackage[backend=biber,style=gb7714-2015]{biblatex}

%\setaystylesection{1}

\usepackage{filecontents}
\begin{filecontents}{\jobname.bib}
% Encoding: UTF-8
@article{ref-1-1-Yang,
author    = {Yang, Y and Ren, T L and Zhang, L T and others},
title     = {Miniature microphone with silicon-based ferroelectric thin films},
journal   = {Integrated Ferroelectrics},
date      = {2003},
pages      = {229-235},
volume      = {52},
annotation      = {SCI 收录, 检索号:758FZ},
}

@article{ref-2-1-杨轶,
author    = {杨轶 and 张宁欣 and 任天令 and others},
title     = {硅基铁电微声学器件中薄膜残余应力的研究},
journal   = {中国机械工程},
pages= {1289-1291},
date      = {2005},
volume      = {16},
number ={14},
annotation ={EI 收录, 检索号:0534931 2907},
}

@article{ref-3-1-杨轶,
author    = {杨轶 and 张宁欣 and 任天令 and others},
title     = {集成铁电器件中的关键工艺研究},
journal   = {仪器仪表学报},
date      = {2003},
volume      = {24},
pages={192-193},
number      = {S4},
annotation      = {EI 源刊},
}

@article{ref-4-1-Yang,
author    = {Yang, Y and Ren, T L and Zhu, Y P and others},
title     = {PMUTs for handwriting recognition},
pubstate ={In press},
annotation      = {已被 Integrated Ferroelectrics 录用. SCI 源刊.},
}


@article{ref-5-1-Wu,
author    = {Wu, X M and Yang, Y and Cai, J and others},
title     = {Measurements of ferroelectric MEMS microphones},
journal   = {Integrated Ferroelectrics},
date      = {2005},
pages={417-429},
volume      = {69},
annotation      = {SCI 收录, 检索号 :896KM.},
}


@article{ref-6-1-贾泽,
author    = {贾泽 and 杨轶 and 陈兢 and others},
title     = {用于压电和电容微麦克风的体硅腐蚀相关研究},
journal   = {压电与声光},
date      = {2006},
pages      = {117-119},
number={1},
volume      = {28},
annotation      = {EI 收录, 检索号:06129773469.},
}


@article{ref-7-1-伍晓明,
author    = {伍晓明 and 杨轶 and 张宁欣 and others},
title     = {基于MEMS技术的集成铁电硅微麦克风},
journal   = {中国集成电路},
date      = {2003},
volume      = {53},
pages      = {59-61},
}

@patent{ref-8-1-任天令,
author    = {任天令 and 杨轶 and 朱一平 and others},
title     = {硅基铁电微声学传感器畴极化区域控制和电极连接的方法},
number ={中国, CN1602118A},
annotation      = {中国专利公开号.},
}

@patent{ref-9-1-Ren,
author    = {Ren, T L and Yang, Y and Zhu, Y P and others},
title     = {Piezoelectric micro acoustic sensor based on ferroelectric materials},
number ={USA, No.11/215, 102},
annotation      = {美国发明专利申请号.},
}
\end{filecontents}


    \addbibresource{\jobname.bib}
    %


    \begin{document}


    \nocite{*}
    \printbibliography

\chapter*{简历}

    \begin{refsection}

    \settoggle{bbx:gbtype}{false}%局部设置不输出文献类型和载体标识符
    \settoggle{bbx:gbannote}{true}%局部设置输出注释信息
    \setcounter{gbnamefmtcase}{1}%局部设置作者的格式为大小写不变的国标格式
    \nocite{ref-1-1-Yang,ref-2-1-杨轶,ref-3-1-杨轶,ref-4-1-Yang,ref-5-1-Wu,ref-6-1-贾泽,ref-7-1-伍晓明}

    \printbibliography[heading=subbibliography,title={论文成果}]

    \end{refsection}


    \begin{refsection}

    \settoggle{bbx:gbtype}{false}%局部设置不输出文献类型和载体标识符
    \settoggle{bbx:gbannote}{true}%局部设置输出注释信息
    \setcounter{gbnamefmtcase}{1}%局部设置作者的格式为familyahead格式
    \nocite{ref-8-1-任天令,ref-9-1-Ren}

    \printbibliography[heading=subbibliography,title={专利成果}]

    \end{refsection}

    \end{document}

结果为：
图片

@hushidong
Copy link
Author

你看一下biblatex中关于
defbibheading的内容就会比较清楚原理了，biblatex实质是调用chapter*这样的命令来生成文献表标题的。

@marquistj13
Copy link
Owner

ok， thanks

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@marquistj13 @hushidong