BresserWeatherSensorLWCfg.h

///////////////////////////////////////////////////////////////////////////////
// BresserWeatherSensorLWCfg.h
//
// User specific configuration for BresserWeatherSensorLW.ino
//
// - Enabling or disabling of features
// - Voltage thresholds for power saving
// - Timing configuration
// - Timezone
//
// created: 04/2024
//
//
// MIT License
//
// Copyright (c) 2024 Matthias Prinke
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in all
// copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
//
//
// History:
//
// 20240407 Created from BresserWeatherSensorTTNCfg.h
// 20240410 Removed obsolete defines
// 20240413 Refactored ADC handling
// 20240423 Added define ARDUINO_heltec_wifi_lora_32_V3
// 20240427 Added voltage divider and ADC input control pin
//          for ARDUINO_heltec_wifi_lora_32_V3
//          Added BLE configuration/status via LoRaWAN
// 20240430 Modified battery voltage measurement
// 20240504 PowerFeather: added BATTERY_CAPACITY_MAH
//          Moved LoRaWAN command interface to BresserWeatherSensorLWCmd.h
// 20240520 Added definitions for AppLayer payload configuration
// 20240521 Added UBATT_CH/USUPPLY_CH
// 20240524 Added sensor feature flags
//          Moved PAYLOAD_SIZE from BresserWeatherSensorLW.ino
// 20240528 Added encoding of invalid values, modified default payload, fixes
//
// Note:
// Depending on board package file date, either
// ARDUINO_M5STACK_Core2 or ARDUINO_M5STACK_CORE2
// is used - see https://github.com/espressif/arduino-esp32/issues/9423!
// Consequently both variants have to be checked!!!
//
// ToDo:
// -
//
///////////////////////////////////////////////////////////////////////////////

#if !defined(_LWCFG_H)
#define _LWCFG_H

#include <stdint.h>

// Enable debug mode (debug messages via serial port)
// Arduino IDE: Tools->Core Debug Level: "Debug|Verbose"
// For other architectures than ESP32, see logging.h

// Enable logging for https://github.com/vshymanskyy/Preferences (used for RP2040)
// #define NVS_LOG

//--- Select Board ---
#if !defined(ARDUINO_TTGO_LoRa32_V1) && !defined(ARDUINO_TTGO_LoRa32_V2) &&               \
    !defined(ARDUINO_TTGO_LoRa32_v21new) && !defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2) && \
    !defined(ARDUINO_FEATHER_ESP32) && !defined(ARDUINO_ADAFRUIT_FEATHER_RP2040) &&       \
    !defined(ARDUINO_heltec_wifi_32_lora_V3) && !defined(ARDUINO_heltec_wifi_lora_32_V3) && \
    !defined(ARDUINO_M5STACK_Core2) && !defined(ARDUINO_M5STACK_CORE2) && \
    !defined(ARDUINO_ESP32S3_POWERFEATHER)
// Use pinning for LoRaWAN Node
#define LORAWAN_NODE

// Use pinning for Firebeetle Cover LoRa
//#define FIREBEETLE_ESP32_COVER_LORA
#endif

#if defined(ARDUINO_FEATHER_ESP32)
// The Thingpulse ePulse Feather board has the same pinout as
// the Adafruit Feather ESP32 board, but a different VBAT voltage divider!
// See https://github.com/matthias-bs/BresserWeatherSensorTTN/issues/55
//#define ARDUINO_THINGPULSE_EPULSE_FEATHER
#endif

// Uplink message payload size
// The maximum allowed for all data rates is 51 bytes.
const uint8_t PAYLOAD_SIZE = 51;

// Battery voltage thresholds for energy saving & deep-discharge prevention

// If battery voltage <= BATTERY_WEAK [mV], MCU will sleep for SLEEP_INTERVAL_LONG
// Go to sleep mode immediately after start if battery voltage <= BATTERY_LOW [mV]
#define BATTERY_WEAK 3500
#define BATTERY_LOW 3200

// Battery voltage limits in mV (usable range for the device) for battery state calculation
#define BATTERY_DISCHARGE_LIMIT 3200
#define BATTERY_CHARGE_LIMIT 4200

// Minimum sleep interval (in seconds)
#define SLEEP_INTERVAL_MIN 60

// Sleep for SLEEP_INTERVAL seconds after succesful transmission
#define SLEEP_INTERVAL 360

// Long sleep interval, MCU will sleep for SLEEP_INTERVAL_LONG seconds if battery voltage <= BATTERY_WEAK
#define SLEEP_INTERVAL_LONG 900

// RTC to network time sync interval (in minutes)
#define CLOCK_SYNC_INTERVAL 24 * 60

// Timeout for weather sensor data reception (seconds)
#define WEATHERSENSOR_TIMEOUT 180

// If enabled, enter deep sleep mode if receiving weather sensor data was not successful
// #define WEATHERSENSOR_DATA_REQUIRED

// Enable transmission of weather sensor ID
// #define SENSORID_EN

// Enable rain data statistics
#define RAINDATA_EN

// Enable battery / supply voltage uplink
#define ADC_EN

// Enable OneWire temperature measurement
#define ONEWIRE_EN

// Enable BLE temperature/humidity measurement
// Notes:
// * BLE requires a lot of program memory!
// * ESP32-S2 does not provide BLE!
#if !defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2) && !defined(ARDUINO_ARCH_RP2040)
// #define MITHERMOMETER_EN
#define THEENGSDECODER_EN
#endif

// Enable Bresser Soil Temperature/Moisture Sensor
#define SOILSENSOR_EN

// Enable Bresser Lightning Sensor
#define LIGHTNINGSENSOR_EN

// Enter your time zone (https://remotemonitoringsystems.ca/time-zone-abbreviations.php)
#define TZINFO_STR "CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00"

// Enable Ultrasonic Distance Sensor
#if defined(LORAWAN_NODE) || defined(ARDUINO_ADAFRUIT_FEATHER_RP2040)
// #define DISTANCESENSOR_EN
// #define DISTANCESENSOR_CH 8
#endif


// ADC for supply/battery voltage measurement
// Defaults:
// ---------
// FireBeetle ESP32:            on-board connection to VB (with R10+R11 assembled)
// TTGO LoRa32:                 on-board connection to VBAT
// Adafruit Feather ESP32:      on-board connection to VBAT
// Adafruit Feather ESP32-S2:   no VBAT input circuit
// Adafruit Feather RP2040:     no VBAT input circuit (connect external divider to A0)
#if defined(ARDUINO_TTGO_LoRa32_V1) || defined(ARDUINO_TTGO_LoRa32_V2) || defined(ARDUINO_TTGO_LoRa32_v21new)
#define PIN_ADC_IN 35
#elif defined(ARDUINO_FEATHER_ESP32)
#define PIN_ADC_IN A13
#elif defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2)
// External voltage divider required
#pragma message("External voltage divider required for battery voltage measurement.")
#pragma message("No power-saving & deep-discharge protection implemented yet.")
// unused
#define PIN_ADC_IN -1
#elif defined(LORAWAN_NODE)
// External Li-Ion Battery connected to solar charger
#define PIN_ADC_IN A3
#elif defined(FIREBEETLE_ESP32_COVER_LORA)
#pragma message("On-board voltage divider must be enabled for battery voltage measurement (see schematic).")
#pragma message("No power-saving & deep-discharge protection implemented yet.")
// On-board VB
#define PIN_ADC_IN A0
#elif defined(ARDUINO_heltec_wifi_32_lora_V3) || defined(ARDUINO_heltec_wifi_lora_32_V3)
// On-board VB
#define PIN_ADC_IN A0
#elif defined(ARDUINO_ESP32S3_POWERFEATHER)
// Set battery capacity in mAh
#define BATTERY_CAPACITY_MAH 0
#if BATTERY_CAPACITY_MAH == 0
#pragma message("Battery capacity set to 0 - battery voltage measurement disabled.")
#endif
// unused
#define PIN_ADC_IN -1
#elif defined(ARDUINO_M5STACK_Core2) || defined(ARDUINO_M5STACK_CORE2)
// Unused
#define PIN_ADC_IN -1
#elif defined(ARDUINO_ADAFRUIT_FEATHER_RP2040)
#pragma message("External voltage divider required for battery voltage measurement.")
#pragma message("No power-saving & deep-discharge protection implemented yet.")
#define PIN_ADC_IN A0
#else
#pragma message("Unknown battery voltage measurement circuit.")
#pragma message("No power-saving & deep-discharge protection implemented yet.")
// unused
#define PIN_ADC_IN -1
#endif

// Additional ADC pins
#if defined(LORAWAN_NODE)
#define PIN_SUPPLY_IN A0
#endif

#ifdef PIN_SUPPLY_IN
// Voltage divider R1 / (R1 + R2) -> V_meas = V(R1 + R2); V_adc = V(R1)
const float SUPPLY_DIV = 0.5;
const uint8_t SUPPLY_SAMPLES = 10;
#endif

// "Channel" in appPayloadCfg
#define USUPPLY_CH 1 

#ifdef PIN_ADC1_IN
// Voltage divider R1 / (R1 + R2) -> V_meas = V(R1 + R2); V_adc = V(R1)
const float ADC1_DIV = 0.5;
const uint8_t ADC1_SAMPLES = 10;
#endif

#ifdef PIN_ADC2_IN
// Voltage divider R1 / (R1 + R2) -> V_meas = V(R1 + R2); V_adc = V(R1)
const float ADC2_DIV = 0.5;
const uint8_t ADC2_SAMPLES = 10;
#endif

#ifdef PIN_ADC3_IN
// Voltage divider R1 / (R1 + R2) -> V_meas = V(R1 + R2); V_adc = V(R1)
const float ADC3_DIV = 0.5;
const uint8_t ADC3_SAMPLES = 10;
#endif

#ifdef ONEWIRE_EN
#if defined(ARDUINO_TTGO_LoRa32_V1)
#define PIN_ONEWIRE_BUS 21
#elif defined(ARDUINO_FEATHER_ESP32) || defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2)
#define PIN_ONEWIRE_BUS 15
#elif defined(LORAWAN_NODE) || defined(FIREBEETLE_ESP32_COVER_LORA)
#define PIN_ONEWIRE_BUS 5
#elif defined(ARDUINO_ADAFRUIT_FEATHER_RP2040)
#define PIN_ONEWIRE_BUS 6
#else
#define PIN_ONEWIRE_BUS 0
#endif
#endif

#ifdef DISTANCESENSOR_EN
#if defined(LORAWAN_NODE)
#define DISTANCESENSOR_TX 0 // pull-up/open: processed value / low: real-time value
#define DISTANCESENSOR_RX 26
#define DISTANCESENSOR_PWR 25
#define DISTANCESENSOR_RETRIES 5
#elif defined(ARDUINO_ADAFRUIT_FEATHER_RP2040)
#define DISTANCESENSOR_TX 0 // pull-up/open: processed value / low: real-time value
#define DISTANCESENSOR_RX 1
#define DISTANCESENSOR_PWR 7
#define DISTANCESENSOR_RETRIES 8
#endif
#endif

#ifdef ADC_EN
// Voltage divider R1 / (R1 + R2) -> V_meas = V(R1 + R2); V_adc = V(R1)
#if defined(ARDUINO_THINGPULSE_EPULSE_FEATHER)
const float UBATT_DIV = 0.6812;
#elif defined(ARDUINO_heltec_wifi_32_lora_V3) || defined(ARDUINO_heltec_wifi_lora_32_V3)
#define ADC_CTRL 37
// R17=100k, R14=390k => 100k / (100k + 390 k)
const float UBATT_DIV = 0.2041;
#else
const float UBATT_DIV = 0.5;
#endif
const uint8_t UBATT_SAMPLES = 10;

// "Channel" appPayloadCfg
#define UBATT_CH 0
#endif

#if defined(MITHERMOMETER_EN) || defined(THEENGSDECODER_EN)
// BLE scan time in seconds
#define BLE_SCAN_TIME 31
// BLE scan mode (0: passive / 1: active)
#define BLE_SCAN_MODE 1

// List of known sensors' BLE addresses
#define KNOWN_BLE_ADDRESSES \
    {                       \
        "a4:c1:38:b8:1f:7f" \
    }
#endif

/// AppLayer payload configuration size in bytes
#define APP_PAYLOAD_CFG_SIZE 24

// --- Default AppLayer payload configuration ---

// For each sensor/interface type, there is a set of flags.
// If a flag is set, the "channel" is enabled (according to the flags bit position).
// For sensors which use a fixed channel, the flags are used to select
// which signals (features) shall be included in the payload.

// -- Sensor feature flags --

// Weather Sensor
#define PAYLOAD_WS_HUMIDITY     0b00000010
#define PAYLOAD_WS_WIND         0b00000100
#define PAYLOAD_WS_RAINGAUGE    0b00001000
#define PAYLOAD_WS_LIGHT        0b00010000
#define PAYLOAD_WS_UV           0b00100000
#define PAYLOAD_WS_RAIN_H       0b01000000 // Rain post-processing; hourly rainfall
#define PAYLOAD_WS_RAIN_DWM     0b10000000 // Rain post-processing; daily, weekly, monthly

// Lightning sensor
#define PAYLOAD_LIGHTNING_RAW   0b00010000 // Sensor raw data
#define PAYLOAD_LIGHTNING_PROC  0b00100000 // Post-processed lightning data

// -- 868 MHz Sensor Types --
// 0 - Weather Station; 1 Ch
// Note: Included in APP_PAYLOAD_CFG_TYPE01
#define APP_PAYLOAD_CFG_TYPE00 0x00

// 1 - Weather Station; 1 Ch
//   - Professional Wind Gauge (with T and H); 1 Ch
//   - Professional Rain Gauge (with T); 1 Ch
//     Note: Type encoded as 0x9/0xA/0xB in radio message,
//           but changed to 1 in BresserWeatherSensorReceiver!
#define APP_PAYLOAD_CFG_TYPE01 ( \
    1 /* enable sensor */ | \
    PAYLOAD_WS_HUMIDITY | \
    PAYLOAD_WS_WIND | \
    PAYLOAD_WS_RAINGAUGE | \
    /* PAYLOAD_WS_LIGHT | */ \
    PAYLOAD_WS_UV | \
    PAYLOAD_WS_RAIN_H | \
    PAYLOAD_WS_RAIN_DWM \
)

// 2 - Thermo-/Hygro-Sensor; 7 Ch
// Ch: 1
#define APP_PAYLOAD_CFG_TYPE02 0x02

// 3 - Pool / Spa Thermometer; 7 Ch
// Ch: 1
#define APP_PAYLOAD_CFG_TYPE03 0x00

// 4 - Soil Moisture Sensor; 7 Ch
// Ch: 1
#define APP_PAYLOAD_CFG_TYPE04 0x02

// 5 - Water Leakage Sensor; 7 Ch
// Ch: 1
#define APP_PAYLOAD_CFG_TYPE05 0x00

// 6 - reserved
#define APP_PAYLOAD_CFG_TYPE06 0x00

// 7 - reserved
#define APP_PAYLOAD_CFG_TYPE07 0x00

// 8 - Air Quality Sensor PM2.5/PM10; 4 Ch
#define APP_PAYLOAD_CFG_TYPE08 0x00

// 9 - Lightning Sensor; 1 Ch
// Ch: 0
#define APP_PAYLOAD_CFG_TYPE09 ( \
    1 /* enable sensor */ | \
    /* PAYLOAD_LIGHTNING_RAW | */ \
    PAYLOAD_LIGHTNING_PROC \
)

// 10 - CO2 Sensor; 4 Ch
#define APP_PAYLOAD_CFG_TYPE10 0x00

// 11 - HCHO/VCO Sensor; 4 Ch
#define APP_PAYLOAD_CFG_TYPE11 0x00

// 12 - reserved
#define APP_PAYLOAD_CFG_TYPE12 0x00

// 13 - reserved
#define APP_PAYLOAD_CFG_TYPE13 0x00

// 14 - reserved
#define APP_PAYLOAD_CFG_TYPE14 0x00

// 15 - reserved
#define APP_PAYLOAD_CFG_TYPE15 0x00

// -- 1-Wire Sensors --
// Index: 0
#define APP_PAYLOAD_CFG_ONEWIRE1 0x00 // onewire[15:8]
#define APP_PAYLOAD_CFG_ONEWIRE0 0x01 // onewire[7:0]

// -- Analog Inputs --
// 0x01: Battery Voltage
// 0x02: Supply Voltage
#define APP_PAYLOAD_CFG_ANALOG1 0x00 // analog[15:8]
#define APP_PAYLOAD_CFG_ANALOG0 0x01 // analog[7:0]

// -- Digital Inputs --
// Assign to any type of "channel",
// e.g. GPIO, SPI, I2C, UART, ...
#define APP_PAYLOAD_CFG_DIGITAL3 0x00 // digital[31:24]
#define APP_PAYLOAD_CFG_DIGITAL2 0x00 // digital[23:16]
#define APP_PAYLOAD_CFG_DIGITAL1 0x00 // digital[15:8]
#define APP_PAYLOAD_CFG_DIGITAL0 0x00 // digital[7:0]

#define APP_PAYLOAD_OFFS_ONEWIRE 16
#define APP_PAYLOAD_BYTES_ONEWIRE 2

#define APP_PAYLOAD_OFFS_ANALOG 18
#define APP_PAYLOAD_BYTES_ANALOG 2

#define APP_PAYLOAD_OFFS_DIGITAL 20
#define APP_PAYLOAD_BYTES_DIGITAL 4

// Encoding of invalid values
// for floating point, see
// https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/NaN
#define INV_FLOAT 0x3FFFFFFF 
#define INV_UINT32 0xFFFFFFFF
#define INV_UINT16 0xFFFF
#define INV_UINT8 0xFF
#define INV_TEMP 327.67

#endif // _LWCFG_H