-
Notifications
You must be signed in to change notification settings - Fork 998
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Cannot change flight mode on Cube Blue with Ardupilot via MAVROS2 #1972
Comments
I tried with Pixhawk6C. It has no problems. I don't know what to do with the Cube Blue. |
Hello, Have you tried other commands? I do not see firmware version report in the log, so i suspect that there may be problem on OBC -> FCU path. |
Hi, @vooon .. I don't think there is problems in the cable. I used the same cable for the Pixhawk6C, and it has no issues in sending/receiving data. |
I'm not sure, but maybe the port you use configured in telemetry-out mode only? Don't remember exact params and values. But i remember that there were different modes of operation for mavlink app on the PX4 side. |
@vooon .. hi, thanks for the suggestions. I'm using the arducopter. I modified the sr2_xxx variables, according to the sr0_xxx variables. Before that, I can't even see the incoming data from the FC. I can't find anything else yet. Please let me know if you remember anything. |
Issue details
Hi, I use the mavros on the jetson and connect the FC via serial. I can see the values coming from the FC. But, I cannot change the flight mode nor arm/disarm. I can do it all on the mission planner.
Any suggestions or solutions, please?
MAVROS version and platform
Mavros: release/foxy/mavlink
ROS: foxy
Ubuntu: 20.04
Autopilot type and version
[ / ] ArduPilot
[ ] PX4
Version: Arducopter 4.5.5
Node logs
Diagnostics
Check ID
The text was updated successfully, but these errors were encountered: