Skip to content

Latest commit

 

History

History
183 lines (141 loc) · 7.05 KB

README.markdown

File metadata and controls

183 lines (141 loc) · 7.05 KB
Raw

Build Status codecov FOSSA Status CII Best Practices Slack Releases

uZFS ( aka cStor )

uZFS enables running the DMU layer of ZFS on Linux in userspace. Unlike ZFS that acts on the kernel IOCTLs for both IO and CLI operations, uZFS does the following:

  • Exposes an IOCTL service over unix domain sockets
  • The DMU Layer(or ZVOL objects) IO operations are exposed as API that can be consumed by any embedded library as opposed to accessing via system calls.
  • The uZFS CLI operations that interact directly with the embedded IOCTL server in uZFS. uZFS CLI will be used to create Pool(zpool) and Volumes(zvol).

For a full list of changes between ZFS and uZFS - refer to wiki

uZFS embedds the cStor Data Engine that helps with:

  • Exposing a Logical Block volume as a network service
  • Read/Write the data from/to the underlying uZFS ZVOL
  • Interact with the other uZFS ZVOLs in the cluster to resync the data

Note: The uZFS server binary with embedded IOCTL server and cStor Data Engine is referred to in the below document as zrepl.

Contribute & Develop

We have a separate document with contribution guidelines.

Building

In addition to standard dependencies of ZFS on Linux project following packages need to be installed on a ubuntu machine:

sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test
sudo apt-get update -qq
sudo apt-get install --yes -qq gcc-6 g++-6
sudo apt-get install --yes -qq build-essential autoconf libtool gawk alien fakeroot linux-headers-$(uname -r) libaio-dev
sudo apt-get install --yes -qq zlib1g-dev uuid-dev libattr1-dev libblkid-dev libselinux-dev libudev-dev libssl-dev libjson-c-dev
sudo apt-get install --yes -qq lcov libjemalloc-dev
sudo apt-get install --yes -qq parted lsscsi ksh attr acl nfs-kernel-server fio
sudo apt-get install --yes -qq libgtest-dev cmake
sudo unlink /usr/bin/gcc && sudo ln -s /usr/bin/gcc-6 /usr/bin/gcc
sudo unlink /usr/bin/g++ && sudo ln -s /usr/bin/g++-6 /usr/bin/g++

Google test framework library does not have a binary package so it needs to be compiled manually:

cd /usr/src/gtest
sudo cmake -DBUILD_SHARED_LIBS=ON CMakeLists.txt
sudo make

# copy or symlink libgtest.a and libgtest_main.a to your /usr/lib folder
sudo cp *.so /usr/lib

Clone the shim layer which adds the core interfaces..

git clone https://github.com/openebs/spl
cd spl
git checkout spl-0.7.9
sh autogen.sh
./configure
make -j4

Special configure option --enable-uzfs should be used in order to create zfs and zpool commands which don't call into the kernel using ioctls, but instead call into uZFS process for serving "ioctls" using unix domain socket. Other than that the build steps are the same as for ZoL:

git clone https://github.com/openebs/cstor.git
cd cstor
./autogen.sh
CFLAGS="-g -O0" ./configure --enable-debug --enable-uzfs=yes
make

Additional configure option --with-fio=<path-to-fio-repo> can be supplied in case that fio engine for zrepl is wanted.

Running it

This assumes that you have configured zfs with --enable-uzfs=yes option. To try zpool and zfs commands, start cmd/zrepl/zrepl binary with sudo and leave it running. Now zpool and zfs commands from cmd/ directory can be run in usual way and they will act on running instance of zrepl.

Testing performance

Standard IO benchmarking tool fio can be used with special engine for zrepl. Make sure that uzfs was configured and built with fio engine. If that is the case, then the fio can be started as follows (replace $UZFS_PATH by path to built uzfs repository):

LD_LIBRARY_PATH=fio
LD_LIBRARY_PATH=$UZFS_PATH/lib/fio/.libs fio config.fio

Example of fio config file can be found in lib/fio directory.

Docker image

A docker image with zrepl for testing purpose can be built as follows. The privileged parameter when starting container is to enable process tracing inside the container. The last command gets you a shell inside the container which can be used for debugging, running zfs & zpool commands, etc. Explanation of the two mounted volumes follows:

  • /dev: All devices from host are visible inside the container so we can create pools on arbitrary block device.
  • /tmp: This is a directory where core is dumped in case of a fatal failure. We make it persistent in order to preserve core dumps for later debugging.
sudo docker build -t my-cstor .
sudo mkdir /tmp/cstor
sudo docker run --privileged -it -v /dev:/dev -v /run/udev:/run/udev --mount source=cstortmp,target=/tmp my-cstor
sudo docker exec -it <container-id> /bin/bash

You could also run local image repo and upload the test image there:

sudo docker run -d -p 5000:5000 --restart=always --name registry registry:2
sudo docker build -t localhost:5000/my-cstor .
sudo docker push localhost:5000/my-cstor

Troubleshooting

In order to print debug messages start zrepl with -l debug argument. If running zrepl in container with standard entrypoint.sh script, set env variable LOGLEVEL=debug. To do the same when running zrepl on k8s cluster use patch command to insert the same env variable to pod definition. Details differ based on how zrepl container was deployed on k8s cluster:

kubectl patch deployment cstor-deployment-name --patch "$(cat patch.yaml)"

where patch.yaml content is:

spec:
  template:
    spec:
      containers:
      - name: cstor-container-name
        env:
        - name: LOGLEVEL
          value: "debug"

Caveats

Disk write cache must be disabled for any device not managed by linux sd driver. Cache flush is not supported for other drivers than sd.

Contributing

Make sure to run cstyle on your changes before you submit a pull request:

make cstyle

And assure that the tests are passing. For possible tests to run see .travis.yml file in root directory. Here is an example of running a couple of available tests:

cmd/ztest/ztest -V
tests/cbtest/gtest/test_uzfs
tests/cbtest/gtest/test_zrepl_prot
sudo tests/cbtest/script/test_uzfs.sh

License

FOSSA Status