Mode One Commands

These are the 'mode 1' commands supported in the roland g-code dialect.

Name	Code	Args	Units	Cut	Description	[Mode] After
Draw	D	($x_n$, $y_n$)*	10um	X	Cuts from Current to ABS location(s)	ABS
Feed	F	$f_{mm/s}$	mm/s
Home	H	N/A			Move the to (0,0) user coordinate
?	I	($x_n$, $y_n$)*	10um	X	Lowers to $Z_1$ then CUTS relative	REL
Tool	J	$I_n$	integer #		Tool Change (FOUND BY RE)
Move	M	($x_n$, $y_n$)*	10um		Raises to $Z_2$ moves ABS fast	ABS
Rel Move	R	($x_n$, $y_n$)*	10um		Raises to $Z_2$, moves REL fast	REL
Velocity	V	$v_{mm/s}$	(float) mm/s		Sets the velocity for cutting moves (D, I, Z)
Dwell	W	$I_{us}$	ms		Dwell for the specified number of milliseconds
XYZ Move	Z	($x_n$, $y_n$, $z_n$)*	10um	X	Moves in [Mode], speed is specified by V or !VZ command
@
^

Provide feedback