B and B+ Trees

For understanding the importance and the need for B+ and B trees, please go through the material given in the
below links

Difference between B+ and B Trees:
1) In B+ trees the parent node is also present in the leaf node unlike B trees
2) The leaves of the B+ trees are interconnected unlike B trees


PLEASE NOT THAT:
1) B-Trees and B+ Trees are NOT-BINARY(having 2 children) TREES, [B stands for BALANCED]
   they are Multiway(M-way, that is having M children) Trees.
2) Both B and B+ trees are SEARCH(that is left is less than right) Trees.

Motivation for B-Trees
Index structures for large datasets cannot be stored in main memory
Storing it on disk requires different approach to efficiency
Assuming that a disk spins at 3600 RPM,  one revolution occurs in 1/60 of a second, or 16.7ms
Crudely speaking, one disk access takes about the same time as 200,000 instructions
Assume that we use an AVL tree to store about 20 million records
We end up with a very deep binary tree with lots of different disk accesses; log2 20,000,000 is about 24,
so this takes about 0.2 seconds  
We know we can’t improve on the log n lower bound on search for a binary tree
But, the solution is to use more branches and thus reduce the height of the tree!
As branching increases, depth decreases
A B-tree of order m is an m-way tree (i.e., a tree where each node may have up to m children) in which:
1.        the number of keys in each non-leaf node is one less than the number of its children and these keys
    partition the keys in the children in the fashion of a search tree
2.        all leaves are on the same level
3.        all non-leaf nodes except the root have at least m/2 children
4.        the root is either a leaf node, or it has from two to m children
5.        a leaf node contains no more than m–1 keys
The number m should always be odd

(VERY IMP)Please go through the below links:

cecs.wright.edu/~tkprasad/courses/cs707/L04-X-B-Trees.ppt
http://bluerwhite.org/btree/#applications
http://ayende.com/blog/162945/b-trees-and-why-i-love-them-part-i
http://toyhouse.cc/profiles/blogs/b-tree-b-tree-amp-b-tree
http://www.entrycoder.com/2013/04/difference-between-b-and-b-tree-in.html
http://stackoverflow.com/questions/870218/b-trees-b-trees-difference
http://guide.couchdb.org/draft/btree.html


Advantages of B and B+ Tress over Biary Search Trees:

(VERY IMPORTANT) IMAGE of B+ Tree-> http://en.wikipedia.org/wiki/File:Bplustree.png

source -> http://stackoverflow.com/questions/15485220/advantage-of-b-trees-over-bsts
The major advantage of the B+ tree (and B-trees in general) over binary search trees is
that they play well with caches. If you have a binary search tree whose nodes are stored in
more or less random order in memory, then each time you follow a pointer, the machine will have
to pull in a new block of memory into the processor cache, which is dramatically slower than
accessing memory already in cache.

The B+-tree and the B-tree work by having each node store a huge number of keys or values and
have a large number of children. They are typically packed together in a way that makes it possible
for a single node to fit nicely into cache (or, if stored on disk, to be pulled from the disk in a
single read operation). You then have to do more work to find a key within the node or determine
which child to read next, but because all memory accesses done on a single node can be done without
going back to disk, the access times are very small. This means that even though in principle a BST
might be better in terms of number of memory accesses, the B+-tree and the B-tree can performed better
in terms of the runtime of those memory accesses.

The typical use case for a B+-tree or B-tree is in a database, where there is a huge amount of
information and the data are so numerous that they can't all fit into main memory. Accordingly,
the data can then be stored in a B+-tree or B-tree on a hard disk somewhere. This minimizes the
number of disk reads necessary to pull in the data during lookups. Some filesystems (like ext4, I believe)
use B-trees as well for the same reason - they minimize the number of disk lookups necessary,
which is the real bottleneck.


Advantages of B+ Trees over B-Trees
source -> http://www.quora.com/What-are-the-advantages-of-B+-Tree-over-B-Tree
Short Answer:
It's all about branching factor. Because of the way B+-Trees store records (called "satellite information") 
at the leaf level of the tree, they maximize the branching factor of the internal nodes.
High branching factor allows for a tree of  lower height. Lower tree height allows for less disk I/O.
Less disk I/O theoretically means better performance.

Long Answer:
B-Trees ("B Trees") and B+-Trees ("B Plus Trees") are balanced search trees that perform well
on magnetic media and secondary storage because they minimize disk I/O ops. 

* As a matter of background information, in a typical 7200 RPM disk drive one platter rotation
takes ~8.3ms which is ~5 orders of magnitude longer than the typical 100ns access time of silicon memory.
So using the most efficient data structures to do dynamic set operations (like Search() Create() Insert())
is very important. 

B-Tree algorithms are good for accessing pages (or blocks) of stored information which are then 
copied into main memory for processing. In the worst case, they are designed to do dynamic set operations
in O(lg n) time because of their high "branching factor" (think hundreds or thousands of keys off of any
node). It is this branching factor that makes B-Trees so efficient for block storage/retrieval,
since a large branching factor greatly reduces the height of the tree and thus the number of 
disk accesses needed to find any key!

* For relative sizing reference: A B-Tree with a branching factor of 1001 and a height of 2
can store over 1 Billion keys! And since the root node can be kept in main memory, you only need
2 disk accesses to find any key in this tree!

In B+-Trees, all records ("satellite information") are stored at the leaf level while keys and 
child pointers are stored in interior nodes (aka non-leaf nodes). This maximizes the branching factor
of the internal nodes.  This is the advantage of a B+-Tree over a regular B-Tree.