resin-intel repository

Clone/Initialize the repository

There are two ways of initializing this repository:

Clone this repository with "git clone --recursive".

or

Run "git clone" and then "git submodule update --init --recursive". This will bring in all the needed dependencies.

Build information

Build flags

Consult layers/meta-resin/README.md for info on various build flags (setting up serial console support for example) and build prerequisites. Build flags can be set by using the build script (barys) or by manually modifying local.conf.

See below for using the build script.

Build this repository

Run the build script: ./resin-yocto-scripts/build/barys
You can also run barys with the -h switch to inspect the available options

Custom build using this repository

Run the build script in dry run mode to setup an empty build directory ./resin-yocto-scripts/build/barys --remove-build --dry-run
Edit the local.conf in the build/conf directory
Prepare build's shell environment source layers/poky/oe-init-build-env
Run bitbake (see message outputted when you sourced above for examples)