Skip to content

Latest commit

 

History

History
executable file
·
244 lines (205 loc) · 8.24 KB

README.md

File metadata and controls

executable file
·
244 lines (205 loc) · 8.24 KB
Raw

MicMac v2 (MMVII)

Table of Contents

Description

MicMac is a free open-source photogrammetry solution developed at (IGN) - French Mapping Agency - since 2003. A second version named MMVII aimed at facilitating external contributions and being more maintainable in the long term has been in development since 2020.

Prerequisites

Some external tools need to be present on your system for MMVII to run properly:

  • Git to clone the repository
  • CMake to generate build files
  • make for parallel processes management
  • PROJ for coordinate system conversion and coordinate reference system transformation
  • PROJ additional data grids for coordinates tranformations (optional, see doc)
  • ccache for recompilation optimization (optional)
  • OpenMP multi-platform parallel programming (optionnal)
  • Doxygen documentation generator (optional)
  • vcpkg C/C++ library manager (Windows only)

Installation

This section covers the compilation of MMVII source code to generate binaries. Pre-compiled binaries are available HERE.

Compilation procedure is discribed below for the 3 main operating systems:

Linux Ubuntu distribution

Before starting the installation, it is necessary to install MicMac v1 by following the instructions HERE.

Under Linux (Ubuntu) distribution the installation procedure is as follows:

  • Open a terminal

  • Install dependancies specific to MMVII:

     sudo apt install pkg-config libproj-dev

  • Access the folder:

     cd micmac/MMVII

  • Create a directory for building intermediate files and access it:

     mkdir build && cd build

  • Configure CMAKE and generate makefiles:

     cmake ../

  • Compile MMVII:

     make full -j N
    • N is the number of CPUs on the machine and can be retrieved by typing nproc --all

  • Add binaries to the PATH (adapt the path):

     echo 'export PATH=/home/src/micmac/MMVII/bin:$PATH' >> ~/.bashrc

Windows

Before starting the installation, it is necessary to install MicMac v1 by following the instructions HERE.

Under Windows the installation procedure is as follows:

Install vcpkg (if not done for MicMac v1)

  • Open a Git Bash terminal
  • In another working directory, clone the repository: 
     git clone  https://github.com/microsoft/vcpkg.git
  • Access the folder: 
     cd vcpkg
  • Setup vcpkg: 
     ./bootstrap-vcpkg.bat
     vcpkg.exe integrate install

Install MMVII

  • Open a Git Bash terminal
  • Access the folder: 
     cd micmac/MMVII
  • Create a directory for building intermediate files and access it: 
     mkdir build && cd build
  • Configure cmake and generate Makefiles: 
     "[CMAKE_DIR]/cmake.exe" .. "-DCMAKE_TOOLCHAIN_FILE=[VCPKG_DIR]/vcpkg/scripts/buildsystems/vcpkg.cmake"
  • Compile MMVII: 
     "[CMAKE_DIR]/cmake.exe" --build . --target full --config Release
  • Add binaries to Windows PATH environment variable via Advanced system settings menu. Example of path (adapt the path): 
     "C:\src\micmac\MMVII\bin"

macOS

Additionnal notes

Linux compilation details

  • If using CLang version XX and want OpenMP: sudo apt install libomp-XX-dev
  • You can use cmake -G Ninja .. to use Ninja build system instead of the native one. (sudo apt install ninja-build)
  • Use cmake --build . -j N or cmake --build . -j N -v instead of make (works with all build systems)
  • Use cmake --build . --target clean or cmake --build . --target cleanall
  • Use ccmake .. or cmake-gui .. to change config option:
  • CMAKE_BUILD_TYPE:
    • Debug : -g
    • RelWithDebInfo : -O3 -g (default)
    • Release : -O3 -DNDEBUG
  • CMAKE_CXX_COMPILER (advanced mode : 't'):
    • Allow to set compiler version and type (g++, clang)
  • Clean :
    • make clean : delete build products
    • make distclean : delete build products and generated codes
    • rm -fr MMVII/build/* : reinitialize the build configuration

MMVII Command Completion

You can enable command completion for MMVII in Linux Bash, which simplifies the use of MMVII commands.

Requirements:

  • bash-completion
  • python-is-python3

These are typically installed by default on Ubuntu. If not, you can install them using: bash sudo apt install bash-completion python-is-python3`

Configuration:

  • Ensure MMVII is compiled.

  • Make sure the MMVII executable is in your $PATH.

  • Add the following line to your ${HOME}/.bashrc file:

    [ -f ${HOME}/@MICMAC_SOURCE_DIR@/micmac/MMVII/bash-completion/mmvii-completion ] && . ${HOME}/@MICMAC_SOURCE_DIR@/micmac/MMVII/bash-completion/mmvii-completion

After making this modification, the command completion feature will be active in any new terminal session.

Windows:

If you're using bash (installed with git for example) on Windows, completion may also works:

  • You must have python >= 3.7 installed somewhere

  • Edit your ~/.bash_profile and add: (adapt first 2 lines to your case)

    MMVII_INSTALL_PATH=/c/micmac/MMVII
PYTHON_INSTALL_PATH=/c/Python/Python39/
PATH=${PYTHON_INSTALL_PATH}:${MMVII_INSTALL_PATH}/bin:$PATH
[ -f ${MMVII_INSTALL_PATH}/bash-completion/mmvii-completion ] && . ${MMVII_INSTALL_PATH}/bash-completion/mmvii-completion

Graphical User Interface vMMVII

The vMMVII tool provides a convenient graphical user interface (GUI) for writing MMVII commands. To compile it, add "-DvMMVII_BUILD=ON" on then cmake configure command line.

For Ubuntu 22.04, you can install the necessary QT5 package with the following command:

sudo apt install qtbase5-dev

For windows, it will be automatically downloaded and compiled (may take a very long time the first time)

To use vMMVII, simply type vMMVII in a terminal in your working directory.

Please note:

  • Currently, there is no documentation available.
  • The tool is in beta, so some MMVII parameters may be misinterpreted or may not have the appropriate File Dialog helper.

Documentation

The latest version of the documentation can be downloaded directly HERE.

HTML Documentation

  • Ensure you have doxygen installed (on Ubuntu, you can use the following command): 
     sudo apt install doxygen
  • Navigate to the MMVII directory: 
     cd micmac/MMVII
  • Run the following command: 
     doxygen Doxyfile

PDF Documentation

  • Ensure you have LaTeX installed (on Ubuntu, you can use the following command): 
     sudo apt install texlive
  • Navigate to the MMVII/Doc directory: 
     cd micmac/MMVII/Doc
  • Run the following command: 
     make

Run a test

  • In a terminal type: 
     MMVII Bench 1

License

This project is licensed under the CECILL-B License - see the LICENSE.md file for details.

Useful links