Build Feedback

[jakemcivor]

1. "LED" and "RESET" text on the top enclosure are too small to print legibly.
2. Unsupported holes on the bottom enclosure could use sacrificial bridges to improve print quality.
3. The instruction manual could use a few updates in the firmware section:
   a. On page 3, step 3, the Additional Board Manager URL should be changed to https://adafruit.github.io/arduino-board-index/package_adafruit_index.json instead of https://www.adafruit.com/package_adafruit_index.json
   b. On page 4, step 11, the link to the EasyMorse library should be changed to a link to the FlashStorage library.
4. Enclosure updates - avoid using screws + nuts, hard to hold the nuts while screwing in screws

---

5. PCB holes are too small for #6-32 screws