Skip to content

Latest commit

 

History

History
294 lines (275 loc) · 5.6 KB

pinouts-and-patch-lead.md

File metadata and controls

294 lines (275 loc) · 5.6 KB
Raw

In order to build the patch lead you are going to need the following parts.

  • ISO female connector
  • Quadlock connector
  • Peugeot screen connector (12 pin)
  • JST XH 6 type connector
  • Some wires

I have included the pinouts which needs to be connected to each other and also drawn a schematics which pins need to be connected if you are more like visual. Also uploaded a photo of such a patch cable so you can have an idea what I've used.

The images can be found in the repository.

All together

iso_quadlock_mfd_bridge

ISO connector pinout

B1 + Rear Right speaker A1
B2 - Rear Right speaker A2 VAN Data bus (9004, DATA, VAN Low)
B3 + Front Right speaker A3 VAN Data bus B (9005, DATAB, VAN High)
B4 - Front Right speaker A4 VAN +12V
B5 + Front Left speaker A5 Power for electric aerial (remote +12V for amplifier)
B6 - Front Left speaker A6 +12V (switched on ignition)
B7 + Rear Left speaker A7 +12V (permanent)
B8 - Rear Left speaker A8 GND

Display connector pinout (12 pin)

1 +12V
2
3 GND
4
5
6
7 CAN Low (9025)
8
9 CAN High (9024)
10
11
12

Display connector pinout (6 pin)

1 +12V
2
3 GND
4 CAN High (9024)
5
6 CAN Low (9025)

Matrix display (MATT) connector pinout (6 pin)

1 +12V
2 CAN Low
3 CAN High
4
5
6 GND

Quadlock connector pinout

A1 + Rear Right speaker A9
A2 + Front Right speaker A10 CAN High (9024)
A3 + Front Left speaker A11 Power for electric aerial (remote +12V for amplifier)
A4 + Rear Left speaker A12 +12V
A5 - Rear Right speaker A13 CAN Low (9025)
A6 - Front Right speaker A14
A7 - Front Left speaker A15
A8 - Rear Left speaker A16 GND
----

JST XH6 connector pinout

1 VAN DATAB
2 VAN DATA
3 CAN Low
4 CAN High
5 GND
6 +12V

The lead

components